StarTech.comメーカーRACKCONS1716の使用説明書/サービス説明書
ページ先へ移動 of 27
Manual Revision: 03/28/2012 For the most up-to-date information, please visit: www.startech.com DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr .startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.
Instruction Manual FCC C ompliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Instruction Manual i T able of C ontents Introduction ............................................................................................ 1 Packaging Conten ts ..................................................................................
Instruction Manual 1 Introduction Thank you for purchasing a StarT ech.com L CD R ack Console with KVM. This product combines an L CD Console with 17” monitor , with a 16-port KVM switch, allowing you to manage multiple computers using an integrated keyboard, mouse, and TFT screen that slides into a compact 1U of rack space when not in use.
Instruction Manual 2 Installation and Usage Keys (2) Screw Kit Mounting Brackets (2) Side Rails with Front and Rear Brackets (2) Module - Rear Panel Module - Fron t Panel Hardwar e Guide Please note: RACKCONS1716 is comprised of two distinc t components - a Rackmountable Console and a R ackmountable KVM Module, as illustrated below .
Instruction Manual 3 Console - F ront V iew (open) Mounting the Console 1. Loosen the r ear screws (pre-installed in side rails) and adjust the length of the rear bracket to t the depth of your cabinet: 2.
Instruction Manual 4 3. Tighten the scr ews that were loosened in Step 1: 4. Install the remaining rail, r epeating Steps 1-3. 5. Slide the Module onto the Console side rails , connecting the Module and Console using the male Centr onics connector provided by the Console, and the female Centr onics connector provided by the Module.
Instruction Manual 5 1. Install three screw s on each side of the console: 2. Installation is now complet e:.
Instruction Manual 6 Connecting the Console/Module T o connect the KVM Console/Module to a computer , perform the following steps: 1. Remove the f our screws from both sides of the KVM console. Be sure to retain these screws for the next installation step .
Instruction Manual 7 3. F rom the rear of the cabinet, slide the KVM console onto the mounting rails. 4. Install one screw on each side of the console (as depicted below).
Instruction Manual 8 Connecting computers t o the module Attach each of your managed computers t o your StarView KVM console’ s PC ports using ultra-thin KVM cables.
Instruction Manual 9 T urning on the console Make sur e the power cord and all cables are connected pr operly. Grasp the handle of the dra wer , pull the panel f or ward and up , then press the pushbutton in the top right hand corner to enable the TFT screen.
Instruction Manual 10 T esting the console 1. T o test that the console is working properly, perform the following steps: 2. P ower up the LCD Rack draw er, and then turn on y our computer . 3. Make sure the video image is center ed within the screen area.
Instruction Manual 11 Input Source 1. Pr ess the Menu button. 2. Use the Down and Up buttons t o scroll. 3. Pr ess the Menu button to enter , and you will see: VGA/DVI 4. Use the Down and Up buttons t o selec t the input signal sourc e. 5. Pr ess the Menu button to save your selection.
Instruction Manual 12 Color - C ont’ d Position 1. Pr ess the Menu button. 2. Use the Down and Up buttons to scr oll. 3. Highlight Position and pr ess the Menu button to enter , which will launch the following screen: 4. Use the Down and Up buttons to scr oll.
Instruction Manual 13 Recall 1. Pr ess the Menu button. 2. Use the Down and Up buttons to scr oll to Recall. Press the Menu button to ent er, where you will be able to select Y es/No using the D own and Up buttons . Once you ha ve do ne so , p re ss the Men u b utt on.
Instruction Manual 14 A tr iangle mark ( p ) to the right of a name indicates the port is cascaded to a Slave; the number at the left of the triangle mark shows the number of ports the Slave has , i.
Instruction Manual 15 Selecting Computers for Aut oscan F unc tion key < F2 > - Use this key to switch the eye mark ( N ) of a computer on or o. First, use the up and down arrow keys to highlight it, then press < F2 > to switch its eye mark on or o.
Instruction Manual 16 Auto Scan In this mode, the Console automatically switches fr om one powered computer to the next, sequentially in a xed interval.
Instruction Manual 17 Scan Type Read y PC + N : In Scan mo de, s can th rough pow er-on an d eye mark selecte d comp uters . Ready PC: In Scan mode, scan through power-on computers. The non-vola tile memor y stores the Scan Type setting . Scan Rate Sets the duration of a computer displayed in A uto Scan mode.
Instruction Manual 18 Hot-key commands A Hot-key command is a short keyboard sequence used to select a computer , to activate computer scan, etc. The Console constan tly interprets keystrokes for hot-keys . A hot-key sequence starts with two left <C TRL> keystrokes follo wed by one or two more keystrokes .
Instruction Manual 19 Hot-key c ommands - cont’ d COMMAND HO TKEY SEQUENCE DESCRIPTION Select computer Left Ctrl + Left Ctrl + x Selects the computer connected to console port “x” . For a c omputer connected directly to the console, “x ” would be 1~8 or A~H.
Instruction Manual 20 Manual Scan Left Ctrl + Left Ctrl + F2 Use the up and down arrow keys t o scroll to the previous or next computer in the sequence. P ress any other key to abort manual scan. Adjust keyboard typematic rate Left Ctrl + Left Ctrl + F4 Scrolls between the dierent typematic rates.
Instruction Manual 21 Specications RACK CONS1708/GB/EU RACK CONS1716/GB RACK CONS1908/GB RACK CONS1916/GB/EU Display Size 17” 19” Connectors 8 x DE15 female input (1708 only) 16 x DE15 female i.
Instruction Manual 22 RACK CONS1708/GB/EU RACK CONS1716/GB RACK CONS1908/GB RACK CONS1916/GB/EU Keyboard / Mouse 106 key PS/2 keyboard with touchpad Keyboard Language USA, UK, German, French, Spanish,.
Instruction Manual 23 T echnical Suppor t StarT ech.com’ s lifetime technical support is an in tegral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit ww w .startech.com/support and access our comprehensive selec tion of online tools, documentation, and downloads.
Hard-to-nd made easy . At StarT ech.com, that isn ’t a slogan. It ’ s a promise. StarT ech.com is your one -stop source for ever y connectivity part you need. From the latest technology t o legac y products — and all the par ts that bridge the old and new — we can help you nd the parts that connect your solutions.
デバイスStarTech.com RACKCONS1716の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
StarTech.com RACKCONS1716をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはStarTech.com RACKCONS1716の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。StarTech.com RACKCONS1716の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。StarTech.com RACKCONS1716で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
StarTech.com RACKCONS1716を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はStarTech.com RACKCONS1716の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、StarTech.com RACKCONS1716に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちStarTech.com RACKCONS1716デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
