Wagner SprayTechメーカー3.23の使用説明書/サービス説明書
ページ先へ移動 of 32
® Edition 3 / 2010 0558 937A ProSpray 3.23 GB Operating manual ProSpray 3.23 Airless high-pressure spraying unit Models: 0558010 0558027 0558099 Original operating manual Uncontrolled Copy.
2 ProSpray 3.23 GB Warning! Never put your fingers, hands or any other part s of the body into the spray jet! Never point the spray gun at yourself, other persons or animals. Never use the spray gun without safety guard. Do not treat a spraying injury as a harmless cut.
ProSpray 3.23 3 GB Contents Contents Page 1. Safety regulations for Airless spraying ....................... 4 1.1 Earthing instructions......................................................... 5 2. General view of application ........................
4 ProSpray 3.23 GB Safety Regulations 1. Safety regulations for Airless spraying This manual contains information that must be read and understood before using the equipment. When you come to an area that has one of the following symbols, pay particular attention and make certain to heed the safeguard.
ProSpray 3.23 5 GB Safety regulations General view of application HAZARD: EXPLOSION HAZARD DUE TO INCOMPATIBLE MATERIALS Will cause severe injury or property damage. PREVENTION : • Donotusematerialscontainingbleachorchlorine.
6 ProSpray 3.23 GB General view of application Description of unit 2. General view of application 2.1 Application 2.2 Coating materials Processible coating materials i Pay attention to the Airless quality of the coating materials to be processed.
ProSpray 3.23 7 GB Description of unit 14 13 12 11 15 16 7 1 3 4 6 5 9 10 2 8 3.3 Legend for explanatory diagram ProSpray 3.23 1 Spray gun 2 High-pressure hose 3 Return hose 4 Suction hose 5 Frame 6 D.
8 ProSpray 3.23 GB Description of unit Starting operation 3.5 Technical data Voltage: 220~240Volt,50/60Hz Max. current consumption: 5.5 A Power cord: 3 x 1.5 mm 2 – 6 m Acceptance capacity: 1035 Watt Max. operating pressure: 221bar(22,1MPa) Volume ow at 12 MPa (120 bar) with water: 2.
ProSpray 3.23 9 GB Starting operation 6 4.2 Control Panel Indicators The following is a description of the control panel indicators. Pressure Indicator Service Indicator Pressure Indicator The pressure indicator shows the current operating pressure of the sprayer.
10 ProSpray 3.23 GB Starting operation Spraying technique 4.5 Cleaning preserving agent when starting- up of operation initially 1. Immersethesuctiontube(Fig.6,Item1)andreturnhose (2)intoacontainerwithasuitablecleaningagent.
ProSpray 3.23 11 GB Handlingthehigh-pressurehose Cleaningtheunit(shuttingdown) 6. Handling the high-pressure hose Avoid sharp bending or kinking of the high-pressure hose. The smallest bending radius amounts to about 20 cm. Do not drive over the high-pressure hose.
12 ProSpray 3.23 GB Cleaningtheunit(shuttingdown) 8.2 Suction lter i A clean suction lter always guarantees maximum feed quantity, constant spraying pressure and problem-free functioning of the unit. 1. Screwoffthelter(Fig.
ProSpray 3.23 13 GB Remedy in case of faults Type of malfunction A. Unitdoesnotstart B. Unitdoesnotdrawinmaterial C. Unitdrawsinmaterial,butthe pressure does not build up D. Coating material exits at the top oftheuidsection E.
14 ProSpray 3.23 GB Servicing Repairs at the unit 10. Servicing 10.1 General servicing Servicing of the unit should be carried out once annually by the WAGNERservice. 1. Check high-pressure hoses, device connecting line and plug for damage. 2. Checktheinletvalve,outletvalveandlterforwear.
ProSpray 3.23 15 GB Repairs at the unit 11 10 12 13 9 8 11.3 Packings 1. Remove inlet valve housing in accordance with the steps in Chapter 11.2, Page 14. 2. It is not necessary to remove the outlet valve. 3. Unscrewbothcylinderheadscrews(Fig.
16 ProSpray 3.23 GB Repairs at the unit 17. Carefullytightenretainernut(5)withadjustingwrench 18. Slidethetopofthepiston(3)intotheT-slot(9)onthe sliderassembly(4). 19.
ProSpray 3.23 17 GB Appendix 12. Appendix 12.1 Selection of tip To achieve faultless and rational working, the selection of the tip is of the greatest importance. In many cases the correct tip can only be determined by means of a spraying test. Some rules for this: The spray jet must be even.
18 ProSpray 3.23 GB Appendix Application Tip Spray Bore Spraying marking angle inch / mm width mm 1) Order no. Natural paints 407 40° 0.007/0.18 160 0552407 Clear paints 507 50° 0.007/0.18 190 ––––––– Oils 209 20° 0.
ProSpray 3.23 19 GB Appendix 12.5 TempSpray The paint material is heated to the required temperature uniformly by an electric heating element, which is located inside the hose (regulatedfrom20°Cto60°C).
20 ProSpray 3.23 GB Appendix 12.6 Pump-Runner (Order No. 2306987) Universalaccessoriesforcleaning,cleantransportationandpreservationofthepumpunit.
ProSpray 3.23 21 Deutschlan d J . W agner GmbH • Otto-Lilienthal-Straße 18 • 88677 Markdor f T el. 0043/07544/5050 • Fax: 0043/07544/505/200 • info@wagner-group.co m T el. 0043/2235/44 158 • Fax: 0043/2235/44 163 • office@wagner-group.a t Österreic h J .
22 ProSpray 3.23 Accessories illustration ProSpray 3.23 3 1 5 7 9 2 4 6 8 Uncontrolled Copy.
ProSpray 3.23 23 Item Part No. Description 1 0296 388 Spray gun AG 08, F-thread 0296 386 Spray gun AG 08, G-thread 0502 166 Spray gun AG 14, F-thread 0502 119 Spray gun AG 14, G-thread 2 0296 441 Pole.
24 ProSpray 3.23 Spare parts list ProSpray 3.23 38 39 40 41 31 30 34 32 33 35 36 1 3 4 19 16 17 15 14 25 26 8 9 27 28 29 22 20 18 21 24 23 5 6 7 2 37 12 13 10 11 Main Assembly AS-3 1 1 2 0558 467 220V.
ProSpray 3.23 25 Item Part No. Description 1 0290 230 Motor shroud 2 9800 340 Ground screw 3 0551 757 Transducer jumper 4 0290 225 Electronic cover 5 0290 229 Belly pan 6 9802 266 Screw(2) 7 0508 5.
26 ProSpray 3.23 Spare parts list ProSpray 3.23 24 23 25 26 27 28 29 30 31 32 33 34 1 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 2 3 4 5 7 6 Fluid section Uncontrolled Copy.
ProSpray 3.23 27 Item Part No. Description 1 0509 594 Retainer 2 0509 584 Piston guide 3 ------- Upperpacking 4 0551 756 Transducer assembly 5 0507 517 Pipe plug 6 0290 209 Pump manifold 7 0509 873.
28 ProSpray 3.23 Spare parts list ProSpray 3.23 9 10 8 11 12 1 2 3 5 6 7 4 13 17 14 15 16 13 Drive Assembly Item Part No. Description 1 0524 637A Housing assembly 2 0509 121 2nd stage gear 3 0558 300A.
ProSpray 3.23 29 ProSpray 3.23 1 4 56 7 8 9 2 3 10 Stand Spare parts list Item Part No. Description 1 9805 367 Screw(3) 2 0290 215 Drip cup 3 0290 211 Leg, right 4 0294 635 Plug 5 0290 214 Foot 6 0.
30 ProSpray 3.23 1 3 2 4 Item Part No. Description 1 0551 706 Siphon hose 2 9850 638 Tiewrap(2) 3 0551 707 Retun tube 4 0279 459 Clip 0551 705 Siphontubeassembly(includesitems1-4) Suction system Spare parts list ProSpray 3.
ProSpray 3.23 31 GB Important notes on product liability As a result of an EC regulation being effective as from January 1, 1990, the manufacturer shall only be liable for his product if all parts come from him or are released by him, and if the devices are properly mounted and operated.
32 ProSpray 3.23 Note on disposal: In observance of the European Directive 2002/96/ EC on waste electrical and electronic equipment and implementation in accordance with national law, this product is .
デバイスWagner SprayTech 3.23の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Wagner SprayTech 3.23をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはWagner SprayTech 3.23の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Wagner SprayTech 3.23の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Wagner SprayTech 3.23で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Wagner SprayTech 3.23を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はWagner SprayTech 3.23の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Wagner SprayTech 3.23に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちWagner SprayTech 3.23デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
