3ComメーカーWireless LAN 11 Mbpsの使用説明書/サービス説明書
ページ先へ移動 of 58
http://www .3com.com/ http://support.3com.com/registration/fr ontpg.pl/ 11 Mbps Wireless LAN Access Point 8000 User Guide V ersion 1.1 Published April, 2002 V ersion 1.
3Com Corporation 5400 Bayfront Plaza Santa Clara, California 95052-8145 Copyright © 2002 3Com Corporation. All rights reserved. No part of this documentation may be repr oduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from 3Com Corporation.
C ONTENTS 1 I NTRODUCTION Wireless and W ir ed Networks 1 Access Point 8000 Feature Summary 1 Installation Overview 2 2 I NSTALLING THE A CCESS P OINT Before Y ou Begin 5 Deciding Where to Place Equip.
Using the Configuration Management System 25 Changing Access Point Properties 26 Setting Network Properties 26 Setting Data T ransmission Properties 27 Setting Advanced Data T ransmission Properties .
Returning Products for Repair 48 R EGULATORY C OMPLIANCE I NFORMATION I NDEX.
.
1 I NTRODUCTION The 3Com wireless pr oduct family lets you set up a local area network (LAN) without the restraints of network cabling. If your of fice already has an Ethernet LAN, the 3Com 11 Mbps W ir eless LAN Access Point 8000 can extend the network without additional cabling.
2 C HAPTER 1: I NTRODUCTION Installation Overview 1 Choose the best place for the installation (flat surface, wall, or acoustical ceiling). Look for a location away from equipment that might cause radio interfer ence. The site should be elevated and centrally located relative to the users on your wir eless network.
Installation Overview 3 5 After hardwar e installation is complete, install the access point tools, utilities, and user guide from the installation CD. See “Installing Softwar e Utilities” on page 14. 6 T o set up a wireless client to authenticate thr ough the access point to your RADIUS server , r efer to “Using the W ireless 802.
.
2 I NSTALLING THE A CCESS P OINT Before Y ou Begin The following items are r equired for installation: ■ 3Com Integrated Power -over -Ether net power supply and power cord. ■ Standard category 5 straight (8-wir e) Ether net cable for connecting the access point to the power supply .
6 C HAPTER 2: I NSTALLING THE A CCESS P OINT selecting the final location and be sure to allow for r outing the antenna cable as requir ed. Do not install the access point in wet or dusty areas without pr otection. Make sure the temperature ranges between –20˚ C to 55˚ C (–4˚ F to 131˚ F).
Placing the Access Point 7 Mounting on a W all T o mount an access point on a wall, follow the instructions on the mounting template supplied in the box and refer to the following illustration. Pr eferably , mount the access point near the ceiling above any obstructions that could block transmission.
8 C HAPTER 2: I NSTALLING THE A CCESS P OINT Mounting on a Ceiling T o mount an access point to the T -rail grid of an acoustical ceiling, you must first attach the mounting bracket to the access point as shown. Align the T -rail grips with the ceiling T -rail, adjusting them so they grip the T -rail snugly .
Connecting Power 9 Connecting Power The access point is powered by the 3Com Integrated Power -over -Ethernet power supply , which pr ovides power over a standard category 5 straight (8-wire) Ethernet cable. This eliminates the need to run standard power dir ectly to the access point.
10 C HAPTER 2: I NSTALLING THE A CCESS P OINT Connecting to an Ether net Network Use a standard Ethernet cable to connect the access point to an Ethernet network, as shown below .
Selecting A Different Antenna 11 Selecting A Different Antenna The standard detachable portable antenna supplied with the access point is a multi-purpose antenna suitable for a variety of environments, including of fice LANs, physical plants, and factory floors.
12 C HAPTER 2: I NSTALLING THE A CCESS P OINT a design, be sure that it can pass signals used in the 2.5 GHz signal range. Many inexpensive units are available with F connectors, but these ar e typically designed for cable TV -UHF applications and may degrade the signals in the band used by the access point.
Selecting A Different Antenna 13 Directional Panel Antenna The ceiling, wall, and corner -mount flat-panel directional antenna (model 3CWE498) provides stable coverage both indoors and outdoors. The panel can be mounted virtually anywhere and in any orientation.
14 C HAPTER 2: I NSTALLING THE A CCESS P OINT antenna to achieve the maximum possible received signal str ength. See “Using the Site Survey T ool” on page 39 for more information. 1 Position the antenna so that there ar e minimal obstacles between it and any client with which it will communicate.
Installing Software Utilities 15 ■ Install the 3Com Network Supervisor . The 3Com Network Supervisor v . 3.5 (3NS) graphically discovers, maps, and displays network links and IP devices, including 3Com wireless access points. It is not r equired for access point management.
.
3 A CCESS P OINT S ECURITY The advanced security features of the Access Point 8000 addr ess the two primary aspects of wireless networking security: network authentication and transmission encryption.
18 C HAPTER 3: A CCESS P OINT S ECURITY them. After successful authentication, the TLS server securely sends the session keys to the access point and user data is allowed to pass.
802.1x RADIUS Support 19 3Com 128-bit Dynamic Security Link Encryption. 3Com’ s proprietary 128-bit Dynamic Security Link is built into the access point and permits user -level authentication. This option can be used only with local access point authentication.
20 C HAPTER 3: A CCESS P OINT S ECURITY If authentication fails, the access point will continue to block traffic fr om that client. The user may also manually log off and stop the agent, which suspends the authentication process until the client manually logs on again or intentionally re-associates with an access point.
Using the Wireless 802.1x Agent 21 whenever an untrusted certificate is received. The 802.1x agent r emembers the last trusted certificate, whether imported or manually verified, and automatically accepts that certificate.
.
4 C ONFIGURING THE A CCESS P OINT 8000 If the access point factory default configuration does not meet your network requir ements, or if you want to customize the configuration settings, you can use these tools, which are included on the 3Com Access Point 8000 Installation CD, to change the configuration.
24 C HAPTER 4: C ONFIGURING THE A CCESS P OINT 8000 6 After you install the device manager , you can launch it by double-clicking the device manager icon on your computer desktop, or , fr om the W indows Start menu select Start / Programs / 3Com Wireless Infrastructure Device Manager / 3Com Wireless Infrastructure Device Manager .
Using the Configuration Management System 25 The following table describes the functions of the buttons in the 3Com W ir eless Infrastructure Device Manager window .
26 C HAPTER 4: C ONFIGURING THE A CCESS P OINT 8000 Changing Access Point Properties The Access Point Pr operties page displays the properties of the selected access point. Y ou can change pr operties by entering values in the fields and clicking the radio buttons described below .
Setting Data Transmission Properties 27 T o tur n of f the access point DHCP server capability regardless of whether or not another DHCP server is available, click Disable and click Save . ■ Gateways —Y ou can specify up to thr ee additional gateway IP addresses.
28 C HAPTER 4: C ONFIGURING THE A CCESS P OINT 8000 be set to Diversity Off. Generally , if the access point is using the standard detachable antennas, this parameter should be set to Diversity On to maximize the transmission and reception qualities of using both antennas.
Setting up Security 29 Setting up Security The Encryption page lets you select the type of security to be used on the access point. The page is divided into Security Settings, which determine the type.
30 C HAPTER 4: C ONFIGURING THE A CCESS P OINT 8000 Access Point Encryption Settings The following encryption settings are available on the Encryption page. These encryption settings are for Security settings that use access point encryption: ■ No Security (Open System) —No encryption is used.
Setting up a MAC Address Access List 31 ■ Deleting users —T o delete users, check the boxes next to the users you want to delete and click Delete . If you click Reset , all checked boxes are clear ed and you may reselect which users to delete fr om the list.
32 C HAPTER 4: C ONFIGURING THE A CCESS P OINT 8000 ■ Identify which traps to send to the trap host or hosts. Defining a TFTP Server A TFTP server must be set up in order to perform firmwar e updates, backups, and restor es. The TFTP Setup page identifies the TFTP server that will be used.
Changing the Administration Password 33 4 Click the Access Point Firmware check box. 5 Enter the name of the upgrade file that you downloaded earlier . 6 Click Upgrade Now . The upgrade file is copied from the TFTP server to the access point and the access point restarts using the new upgrade.
points in a network. T emplate parameters do not affect nor overwrite settings unique to individual access points, such as device name, location, IP addresses, and administration passwords. Viewing Statistics The statistics pages display various categories of operational and performance statistics associated with the access point.
Viewing System Status 35 ■ subnetwork unicast packets delivered to a higher -layer protocol ■ packets that higher -level pr otocols requested be transmitted to a non-unicast (a subnetwork-broadcas.
36 C HAPTER 4: C ONFIGURING THE A CCESS P OINT 8000.
5 C ONDUCTING A S ITE S URVEY Setting up a basic wireless LAN can be as simple as placing a 3Com 11 Mbps W ir eless LAN access point in a central area, plugging it in, and setting up one or more clients. However , you can be certain that you have selected the best location if you conduct a site survey before installing an access point permanently .
38 C HAPTER 5: C ONDUCTING A S ITE S URVEY Y ou should also consider the following items: ■ If there any radio fr equency (RF) systems already in use at the site, their signals could interfere with the access point signals.
Using the Site Survey Tool 39 ■ At the end of the testing, use the results fr om the Site Survey tool to help you decide on the best location for the access point. Based on the tests, the Site Survey tool lists the locations in descending order from best to worst.
40 C HAPTER 5: C ONDUCTING A S ITE S URVEY 3 From the Run menu, select Start T est . The tests take a few moments to run. When they are finished, the r esults appear in the window . For details on the information that is pr esented, see “Interpreting T est Results” on page 40.
Site Survey Menus 41 indicate faster ping rates. Y ou can sort this list in ascending or descending order by clicking the A vg Ping RTT column head. The Site Survey utility recommends access point locations based pur ely on the test numbers. Y ou can use the r ecommendations to guide your decision about access point locations.
.
6 T ROUBLESHOOTING If you have difficulty with the access point, try the solutions in the following table. Symptom Solutions Access point does not power up. Make sure the Ethernet cable is plugged into the port labeled To Access Point on the power brick.
44 C HAPTER 6: T ROUBLESHOOTING While you are configuring the access point, the Configuration Management System stops responding. To maintain wireless association, the WLAN service area and the security settings on the client and the access point must match exactly.
A T ECHNICAL S UPPORT 3Com provides easy access to technical support information thr ough a variety of services. This appendix describes these services. Information contained in this appendix is correct at time of publication. For the most recent information, 3Com r ecommends that you access the 3Com Corporation World Wide Web site.
46 A PPENDIX A: T ECHNICAL S UPPORT Support from Y our Network Supplier If you requir e additional assistance, contact your network supplier . Many suppliers are authorized 3Com service partners who a.
Support from 3Com 47 Europe, Middle East and Africa From anywhere in these regions, call: +44 (0)1442 435529 phone +44 (0)1442 436722 fax Europe and South Africa From the following countries, you may .
Retur ning Products for Repair Before you send a pr oduct directly to 3Com for r epair , you must first obtain an authorization number . Pr oducts sent to 3Com without authorization numbers will be returned to the sender unopened, at the sender’ s expense.
R EGULATORY C OMPLIANCE I NFORMATION FCC R ADIO -F REQUENCY E XPOSURE N OTICE This device generates and radiates radio-frequency energy. In order to comply with FCC radio-frequency radiation exposure .
E UROPEAN C OMMUNITY - CE N OTICE Marking by the symbol: indicates compliance with the essential requirements of Directive 73/23/EC and the essential requirements of articles 3.
I NDEX Numbers 128-bit Dynamic Security Link 30 128-bit dynamic security link encryption 19 128-bit Shared Encryption Key Settings 30 128-bit shared key encryption 18 3CDaemon 14 3Com 128-bit dynamic security link encryption 19 3Com 802.
M MAC address access list 31 MAC address, use in locating devices 24 management SNMP management 31 system log 32 TFTP setup 32 N network privacy mode 28 network properties 26 network supplier support .
デバイス3Com Wireless LAN 11 Mbpsの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
3Com Wireless LAN 11 Mbpsをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこには3Com Wireless LAN 11 Mbpsの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。3Com Wireless LAN 11 Mbpsの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。3Com Wireless LAN 11 Mbpsで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
3Com Wireless LAN 11 Mbpsを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又は3Com Wireless LAN 11 Mbpsの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、3Com Wireless LAN 11 Mbpsに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわち3Com Wireless LAN 11 Mbpsデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
