CasioメーカーCTK-4200の使用説明書/サービス説明書
ページ先へ移動 of 43
CTK-4200/CTK-5300/LK-211/LK-280 WK-220/WK-225/WK-330/CDP-220R MIDI Implemen tation CASIO COMPUTER CO., L TD. Con ten ts I MIDI Message Ov erview 5 1 Pro duct Configuration as a MIDI Device 5 1 . 1 S y s t e m S e c t i o n............................
9 . 7 H o l d 1 ( 4 0 H ) ........................................... 1 1 9 . 8 S o s t e n u t o ( 4 2 H ) ......................................... 1 1 9 . 9 S o f t ( 4 3 H ) ............................................ 1 1 9 . 1 0 R e v e r b S e n d ( 5 B H ) .
1 9 . 3 F o r m a t o f E a c h F i e l d ...................................... 2 2 20 Individual P arameter Op erations 29 21 P arameter Set T ransfer 29 2 1 . 1 C o m m u n i c a t i o n M o d e s ..................................... 2 9 21.2 One-w a y Mo de Comm unication Flow .
32 P arameter Set T able 38 VI I Setting V alues and Send/ Receiv e V alues 40 33 Setting V alue T ables 40 3 3 . 1 O ff / O n S e t t i n g V a l u e T a b l e ................................... 4 0 33.2 –64 - 0 - +63 Setting V alue T able . . . .
P art I MIDI Message Ov erview 1 Pro duct Configuration as a MIDI Device As a MIDI device, this Instrument consists of the System Section, P erformance Controller Section, and Sound Generator Section describ ed below. Eac h of these sections can send and receiv e sp ecific MIDI Messages in accordance with its function.
1.3.2 Instrumen t Part Block The instrumen t part section consists of a total of 32 instrumen t parts, divided into t wo groups, named Group A and Group B of 16 instrumen ts eac h. Eac h part can p erform operations and setting changes using c hannel messages and Instrumen t’s system exclusiv e messages.
op eration mode. F or details, see the explanation for eac h message. 3 Conditions that Disable Message Send and Receiv e All MIDI message send and receiv e is temp orarily disabled while an y one of the following processes is in progress.
P art I I Channel Message 4 Receiv e Channel The c hannel n um b er of the c hannel message received b y each part is sho wn in the table under “1.3.2 Instrumen t P art Blo c k”. 5 Send Channel Basically , the MIDI channel of the c hannel message sent when the Instrumen t is play ed coincides with the MIDI c hannel of the part b eing pla yed.
Send This message is not sen t b y this Instrumen t. Receiv e This message is not received b y this Instrument. 9 Con trol Change Message Format: BnH ccH vvH n: MIDI Channel Number cc: Control Number vv: Value Send Sen t when the Instrumen t’s p edal is operated or when Instrument settings are c hanged.
9.3 Data En try (06H,26H) Message Format: BnH 06H mmH (MSB) BnH 26H llH (LSB) n: MIDI Channel Number mm: MSB Value ll: LSB Value Send Sen t when there is a c hange to the parameter assigned to RPN. This Instrumen t do es not ha ve a parameter that corresp onds to NRPN.
9.7 Hold1 (40H) Message Format: BnH 40H vvH n: MIDI Channel Number vv: Value (Note1) Note1 : F or information about the relationship b etw een setting v alues and send/receive v alues, see the “33.1 Off/On Setting V alue T able” in “VI I Setting V alues and Send/Receive V alues” of this do cument.
9.10 Rev erb Send (5BH) Message Format: BnH 5BH vvH n: MIDI Channel Number vv: Value Send Sen t when auto accompanimen t is used. Receiv e Receipt changes the rev erb send of the corresp onding part.
9.13.1 Pitc h Bend Sensitivity Message Format: BnH 64H 00H BnH 65H 00H BnH 06H mmH BnH 26H llH n: MIDI Channel Number mm: MSB Value(00H - 0CH) ll: LSB Value(Send:00H, Receive:Ignored) Send Sen t when Bend Range is c hanged (CTK-5300, WK-330, CDP-220R only).
Send Sen t when an RPN message send op eration is performed. Receiv e Receipt de-selects RPN. 10 Mo de Message 10.1 All Sound Off (78H) Message Format: BnH 78H 00H n: MIDI Channel Number Send Sen t when the lo cal con trol is set to OFF on the Instrument.
Send This message is not sen t b y this Instrumen t. Receiv e Receipt p erforms the same op eration as when All Notes Off is received. 10.6 Mono (7EH) Message Format: BnH 7EH 00H n: MIDI Channel Number Send This message is not sen t b y this Instrumen t.
12 Channel After T ouc h Message Format: DnH vvH n: MIDI Channel Number vv: Value Send This message is not sen t b y this Instrumen t. Receiv e Receipt adds, to the tone b eing sounded, mo dulation of a depth sp ecified by the v alue.
P art I I I System Message 14 Timing Clo c k Message Format: F8H Send Sen t when auto accompanimen t is used. Receiv e This message is not received b y this Instrument. 15 Start Message Format: FAH Send Sen t when auto accompanimen t is used. Receiv e This message is not received b y this Instrument.
18.1 Univ ersal Real Time System Exclusive Message Message Format: F0H 7FH....F7H 18.1.1 Master V olume Message Format: F0H 7FH 7FH 04H 01H llH mmH F7H ll: LSB Value(Send:00H, Receive:Ignored) mm: MSB Value Send This message is not sen t b y this Instrumen t.
Receiv e Receipt changes the Rev erb duration. 18.1.5 Chorus T yp e Message Format: F0H 7FH 7FH 04H 05H 01H 01H 01H 01H 02H 00H vvH F7H vv: Value(Note1) Note1 : F or information about the relationship b etw een setting v alues and send/receive v alues, see “33.
18.1.10 GS Message Message Format: F0H 41H ddH 42H 12H 40H 00H 7FH 00H 41H F7H dd: Device ID(Ignored) Send This message is not sen t b y this Instrumen t. Receiv e Receipt p erforms the same op eration as when the GM System On message is received. 18.
P art IV Instrumen t-Sp ecific System Exclusiv e Messages 19 F ormat This section explains the format of the Instrumen t-sp ecific System Exclusiv e Messages. See “V Parameter List” and “VI P arameter Set List” for information ab out ho w parameter sets actually are transferred.
19.2 Basic Message Structure Instrumen t-sp ecific system exclusiv e message op eration can b e broadly divided b etw een tw o metho ds: Individual P arameter T ransfer (single parameter send/receive) and Bulk P arameter Set T ransfer (batc h parameter send/receiv e).
19.3.4 dev : MIDI Device ID 00H - 7FH Format: 0dddddddB The con ten ts of this field in a receiv ed message are compared with the Mo del’s MIDI Device ID, and receipt of the incoming message is allo w ed only when the t w o IDs matc h.
HBR:Handshak e Bulk Parameter Set Request Indicates a send request message using the pa- rameter set image handshak e mo de. When the Instrumen t receiv es this action, it uses an HBS message to return the sp ecified parameter set. HBS:Handshak e Bulk Parameter Set Send Indicates a parameter set image send message using handshak e mo de.
Category Transfer ID (c) Parameter Set Individual Parameter One-way Bulk Handshake Bulk 00H System A - - 02H Patch A - - 03H Tone A A A 06H Drum A A A 0DH Instrument A A A 0EH Wave Parameter A A A 0FH.
Blo c k Bit Field Division When the parameter blo c k has a m ulti-dimensional arra y structure, bit 21 of the blo c k num b er is divided into prescribed bit fields based on the rules explained b elow.
19.3.13 len : Data Length Format: LSB 0lllllllB MSB 0mmmmmmmB As sho wn b elo w, the meaning of this field differs dep ending on whether an individual transfer or a bulk parameter set transfer is b eing performed.
19.3.15 Single P arameter Data Size Limit With the Instrumen t’s system exclusiv e message format, the size of a single message cannot exceed 256 b ytes. The data size and the array size, how ever, can cause a pack et to exceed 256 bytes when transferring a single parameter arra y .
19.3.18 EO X : End of System Exclusive Message Format: 11110111B This is the End of System Exclusiv e Message status b yte established b y the MIDI standard. 20 Individual P arameter Op erations There are t w o parameter unit op erations: Individual Parameter T ransfer and Individual Parameter Request.
Session “One session” refers to a series of pro cesses that occur for one user op eration. One subsession or m ultiple subsessions mak e up a session.
Data Receiver Data Sender Operation (External Device) (This Instrument) HBR -----> Send Request (Optional) <----- HBS Data Send ACK -----> Acknowledge <----- HBS Data Send ACK -----> Ac.
Data Receiver Data Sender Operation (External Device) (This Instrument) HBR -----> Send Request (Optional) <----- HBS Data Send ACK -----> Acknowledge <----- HBS Data Send (Error generated.
Data Receiver Data Sender Operation (External Device) (This Instrument) HBR -----> Send Request (Optional) ACK -----> Acknowledge <----- HBS Data Send ACK -----> Acknowledge <----- HBS .
P art V P arameter List This section explains the parameters that actually can b e transferred b y the Instrument. 22 Using the P arameter List • P arameter field Sho ws the parameter name. • ID field Sho ws the parameter ID as a hexadecimal n um b er.
Parameter ID R/W Block Size Array Min-Def-Max Description Model Name 0000 R 000000 7 08 00-20-7F Ascii Character CTK-4200........"CTK-4200" CTK-5300........"CTK-5300" LK-211.........."LK-211 " LK-280.........."LK-280 " WK-220/WK-225.
24 P atc h P arameter The main function of patc h parameters is to configure the settings of the sound source of a device. 24.1 Master T une Parameter These parameters configure the Master T uning settings.
26 All Data P arameter There is no parameter for storing all data directory information. 27 Sequence P arameter 27.1 Sequence Directory Info The sequence parameter stores recorder song directory information.
P art VI P arameter Set List This section explains actually ho w parameter sets can b e transferred b y the Instrument with bulk dump. 32 P arameter Set T able Parameter Set Category cat mem pset desc.
• pset field Sho ws the parameter set n um b er v alue. Applicable parameter set num b ers are those in the user area where the top n um b er is zero, and are not the same num b ers as those displa yed b y the Instrument. (Note1) Note1 : Operation is not guaranteed for v alues other than those noted here.
P art VI I Setting V alues and Send/ Receiv e V alues 33 Setting V alue T ables 33.1 Off/On Setting V alue T able Transmit Value Receive Value Parameter 00H 00H - 3FH Off 7FH 40H - 7FH On 33.2 –64 - 0 - +63 Setting V alue T able Transmit Value Receive Value Parameter 00H 00H -64 : : : 40H 40H 0 : : : 7FH 7FH +63 33.
33.5 Rev erb Time Setting V alue T able Transmit Value Receive Value Parameter 00H 00H - 0BH Off 0CH 0CH - 17H 1 18H 18H - 23H 2 24H 24H - 2FH 3 30H 30H - 3BH 4 3CH 3CH - 47H 5 48H 48H - 53H 6 54H 54H - 5FH 7 60H 60H - 6BH 8 6CH 6CH - 77H 9 78H 78H - 7FH 10 33.
P art VI I I MIDI Implemen tation Notation 34 V alue Notation 34.1 Hexadecimal Notation MIDI implemen tation sometimes requires that data b e expressed in hexadecimal format.
Decimal Hexadecimal Binary 0 00H 00000000B 1 01H 00000001B 2 02H 00000010B 3 03H 00000011B 4 04H 00000100B 5 05H 00000101B 6 06H 00000110B 7 07H 00000111B 8 08H 00001000B 9 09H 00001001B 10 0AH 000010.
デバイスCasio CTK-4200の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Casio CTK-4200をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCasio CTK-4200の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Casio CTK-4200の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Casio CTK-4200で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Casio CTK-4200を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCasio CTK-4200の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Casio CTK-4200に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCasio CTK-4200デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。