CasioメーカーEX-FH20の使用説明書/サービス説明書
ページ先へ移動 of 176
Digital Camera K1 160PCM2DMX Thank you for purchasing this CASIO product. • Before using it, be sure to re ad the prec autions contained in this User’s Guide. • Keep the User’s Guide in a safe place for future refer ence. • For the most up-to-date information abou t this product, visit the official EXILIM Website at http://www.
2 As you unpack your camera, check to make sur e that all items shown below are included. If anything is missing, contact your original retailer. Unpacking Digital c amera Alkaline batteries (4 AA-siz.
3 • The contents of this manual are subject to change w ithout notice. • The contents of this manual have been checked at each step of the production process.
4 Contents Contents Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ❚❙ Quick St art Basics 9 What is a digital camera? .
5 Contents ❚ Using Flash Conti nuous Shutte r . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 ❚ Using High-spee d CS and Pr erecord CS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 ❚ S pecifyi ng the Metho d for Saving Continuous Sh utter Imag es .
6 Contents ❚ Reducing Unde rexposure and Overexposure . . . . . . . . . (Dyna mic Range) . . . 85 ❚ S pecifyi ng Flash Intens ity . . . . . . . . . . . . . . . . . . . . . . . . . (Flash Intensi ty) . . . 86 ❚ T urning On Flash Assist . . . . . .
7 Contents ❚ Uploading Movie Files to Y ouT ube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 16 ❚ Viewing User Document ation . . . . . . . . . . . . . . . . . . . . . . . . . . (PDF Files) . . 1 18 ❚ User Regist ration .
8 Contents ❚ Using Househol d Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 Using a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151 ❚ T o replace the memory car d .
9 Quick Start Basics Quick Start Basics What is a digital camera? Delete A digital camera stores images on a me mory card, so you can record and delete images a countless number of times. Play Record You can use the images you r ecord in a variety of different ways.
10 Quick Start Basics Your CASIO camera is packed with a powerful se lection of features and functions to make recording of digital images easier , in cluding the following three main functio ns. What you can do with your CASIO came ra See page 59 for more information.
11 Quick Start Basics Be sure to attach the lens cap and strap to the camera befor e using it. . Attaching the Lens Cap Always keep the lens cap on the lens whenever you are not using the camera. Always leave the lens cap on the lens when the camer a is turned off and the lens is retracted.
12 Quick Start Basics Use one of the following battery types. • Four AA-size alkaline batteries: LR6 Recommended – Panasonic LR6 (Panasonic Corporation) – DURACELL ULTRA (MX1500) (DURACELL,div of P&G Inc.) • Four AA-size rechargeable Ni-MH (nic kel-metal hydride) bat teries: HR6 Recommended – SANYO eneloop (SANYO Electric Co.
13 Quick Start Basics 3. Close the battery cover. • For information about how to replace the batteries, see page 146. IMPORT ANT! • Before using the camera, you must specify the type of batter y type (alkaline, Ni-MH) you are using. Specifying the wrong battery type setting will shorten the life of the batteries you are using.
14 Quick Start Basics Checking Remaining Battery Power As battery power is consumed, a battery indicator on the monitor screen indicates remaining power as shown below .
15 Quick Start Basics Your camera is designed to optimize its operation in accordance w ith the type of batteries you are using to power it. Sp e cifying the wrong battery type, can cause power to turn off without retr acting the lens and incorrect indication of remaining battery power.
16 Quick Start Basics 2. Use [ 8 ], [ 2 ], [ 4 ], and [ 6 ] to selec t the lan guage you want and then press [SET]. 3. Use [ 8 ], [ 2 ], [ 4 ], and [ 6 ] to select the area where you will be using the camera and then press [SET]. The selected area is highlighted in red.
17 Quick Start Basics Though the camera has built-in memory that can be used to store images and movies, you probably will want to purchase a commercially available memory card for greater capacity. The camera does not come with a memory card. I mages recorded while a memory card is loaded a re saved to the memory card.
18 Quick Start Basics 2. Load a memory card. Positioning the memory card so its back is facing in the same direction as the monitor scree n side of the camera, slide it into the card slot as far as it will go, until you hear it click securely into place.
19 Quick Start Basics To enter the REC mode, press [ON/OFF] (Power) or [ r ] (REC). To enter the PLAY mode, press [ p ] (PLAY). The back lamp will light (green) momentarily and the camera will turn on. If you are entering the REC mode, the lens will extend from the camera at this time.
20 Quick Start Basics 1. Remove the lens cap and then press [ r ] (REC) to turn on the camera. 2. Set the mode dial to t (Single Shot). 3. Press [ 8 ] . 4. Use [ 8 ] and [ 2 ] to select the top option in the control panel (Expo sure mode). 5. Use [ 4 ] and [ 6 ] to select t (Aut o) and then press [SET].
21 Quick Start Basics 6. Point the camera at the subject. You can zoom the image, if you want. 7. Half-press the shutter button to focus the image. When focus is complete, the camera will beep, the back lamp will light green, and the focus frame will turn green.
22 Quick Start Basics IMPORT ANT! • While the “Anti Shake” setting is “ D Auto” or “ A Camera AS”, half pressin g the shutter will cause the camera to vibrate and emit an o peration sound. This is normal and does not indicate malfunction (page 79).
23 Quick Start Basics Your images will not come out clear ly if you move the camera when you press the shutter button. When pressing th e shutter button, be sure to hold the camera as shown in the illustration near by, and keep it still by pressing your arms firmly against your sides as you shoot.
24 Quick Start Basics Use the following procedure to view snapshots on the camera’s monitor screen. • For information about how to play back movies, see p age 88. • For information about images reco rded using continuous shutter (CS), see page 89.
25 Quick Start Basics If memory becomes full, you can delete images you no longer need in order to free up storage and record more image s. • Remember that a file (image) delete operation cannot be undone. • For information about images reco rded using continuous shutter (CS), see page 90.
26 Quick Start Basics Operation • Never open the battery cover while the bac k lamp is flashing green. Doing so can result in the image you just shot being sa ved incorrectly, damage to other images stored in memory, malfunction of the camer a, etc.
27 Snapshot Tutorial Snapshot Tutorial Your camera has a variety of different recording modes. Before shooting, use the mode dial to select the recording mode that suits the type of subject you are trying to record. Selecting a Re cording Mode Flash CS This mode will record consecutive images while firing the flash.
28 Snapshot Tutorial The control panel can be used to configure camera settings. 1. In the REC m ode, pres s [ 8 ]. 2. Use [ 8 ] and [ 2 ] to select the setting you want to change . This will select one of the control panel icons and display its settings.
29 Snapshot Tutorial Your camera has a variety of different exposure modes. Before shooting an image, select the exposure mode that suits the type of subject you are shootin g. 1. In the REC m ode, pres s [ 8 ] . 2. Use [ 8 ] and [ 2 ] to select th e top option in the control pa nel (Exposure mode).
30 Snapshot Tutorial S S (Shutter Speed Priority) mode In this mode, you select the shutter speed and other settings are adjusted accordingly. Use [ 4 ] and [ 6 ] to select the desired shutter speed.
31 Snapshot Tutorial IMPORT ANT! • You may not be able to achieve the brightness you want w hen shooting an image that is very dark or very bright. If this happe ns, use the M mode to adjust the aperture or shutter speed manually.
32 Snapshot Tutorial . About imag e sizes The size of an image indicates how many pi xels it contains, and is expressed as horizontal pixels x vertical pixels. Image Size Selection Tips Note that larger images have mo re pixels , so they take u p more memory space.
33 Snapshot Tutorial . To select the image size 1. In the REC m ode, pres s [ 8 ] . 2. Use [ 8 ] and [ 2 ] to select the sec ond control pa nel option f rom the top (Image Size).
34 Snapshot Tutorial • The initial factor y default image size setting is 9M (9 million pixels). • Selecting 3:2 (3456 x 2304 pixels) records images with an aspect ratio of 3:2, which matches the standard aspect ratio of print paper. • The letters “HDTV” stand for “H igh Defini tion Television”.
35 Snapshot Tutorial 1. Press ð (Flash up) to open the flash unit. • The flash will not fire if the flash unit is not open. 2. In the REC mode, pr ess [ 2 ] ( ) once. 3. Use [ 4 ] and [ 6 ] to select the flash setting you want an d then press [SET].
36 Snapshot Tutorial IMPORT ANT! • The camera will not release the shutter unl ess the flash unit is raised when any one of the following conditions exists.
37 Snapshot Tutorial Red-eye Reduction Using the flash to shoot at night or in a dimly lit room can cause red spots inside the eyes of people who are in the image.
38 Snapshot Tutorial ISO sensitivity is a measur e of sensitivity to light. 1. In the REC m ode, pres s [ 8 ] . 2. Use [ 8 ] and [ 2 ] to select the third control pa nel option from the top (ISO Sensiti vity). 3. Use [ 4 ] and [ 6 ] to select the setting you want and then press [SET].
39 Snapshot Tutorial 3. Use [ 4 ] and [ 6 ] to select the shooting co ndition you want and then press [SET]. • When “ ‡ Auto WB” is selected for the w hite balance setting, the camera automatically determines the white point of the subject.
40 Snapshot Tutorial You can manually adjust an image’s exp osure value (EV value) before shooting it. • Exposure Compensation Range: –2.0EV to +2.0EV • Unit: 1/3EV 1. In the REC m ode, pres s [ 8 ] . 2. Use [ 8 ] and [ 2 ] to select the fift h control panel optio n from the top (EV Shift).
41 Snapshot Tutorial The metering mode determines what part of t he subject is metered for exposure. 1. In the REC m ode, pres s [ 8 ] . 2. Use [ 8 ] and [ 2 ] to select the sixth cont rol panel option from the top (Metering). 3. Use [ 4 ] and [ 6 ] to select the setting you want and then press [SET].
42 Snapshot Tutorial 3. Use [ 4 ] and [ 6 ] to select the setting you want and then press [SET]. • “ O Tracking” cannot be used in combination with the following features.
43 Snapshot Tutorial 1. In the REC m ode, pres s [ 8 ] . 2. Use [ 8 ] and [ 2 ] to select the bottom control panel op tion (Date/Time). You can use [ 4 ] and [ 6 ] to select date or time display. NO TE • You can select either of two display styles (page 130) for the date: Month/Day or Day/Month.
44 Snapshot Tutorial NO TE • The higher the digital zoom factor, the coarser the recorded image. Note that the camera also has a function that lets y ou reco rd using digital zoom without image deterioration (page 44). • Use of a tripod is recommended to protect against image blur due to camera movement when shooting with telephoto.
45 Snapshot Tutorial • The deterioration point depends on the current image size setting (page 31). The smaller the image size setting, the higher the zoom factor you can use before reaching the image deterioration point.
46 Snapshot Tutorial Each press of @ (Focus) will cycle thr ough the available focus mode settings. • Whenever you change to another focus mode , the previous focus point is saved, so you can use Auto Focus for initial focus, and then switch to Manual Focus to make fine adjustments.
47 Snapshot Tutorial NO TE • When proper focusing is not possible because the subject is closer than the Auto Focus range, the camera will switch to the Macro Focus range (which d oes not include the Super Macro range) automatically (Auto Macro) .
48 Snapshot Tutorial Using Focus Lock “Focus lock” is a technique y ou can use when you want to compose an image in which the subject you want to focus on is not within the focus frame in the center of the screen. • To use focus lock, select “ U Spot” or “ O Tracking” for the Auto Focus area (page 41).
49 Snapshot Tutorial Pressing [AEL] temporarily loc ks the current exposure and/or focus settings. Press [AEL] again to unlock the sett ings. • Pressing [AEL] while the shutte r button is half-pressed will lock the current exposure or focus setting.
50 Snapshot Tutorial This mode will record consecutive images while firing th e flash. • You can select a CS speed of 1 image, 3 images, or 5 images per second. • In this mode, you can specify consecutive recording of three to 10 images. Recording will stop if you release the shutter button.
51 Snapshot Tutorial NO TE • The back lamp flashes red while the flash is charging. You will not be able t o perform further Flash CS shoot ing until ch arging is complete, which is indicated when the back lamp stops flashing and goes out.
52 Snapshot Tutorial 1. Set the mode dial to × ( High-speed CS). 2. Use [ 8 ] and [ 2 ] to select the second cont rol panel opti on from the bottom (High-speed CS fp s). 3. Use [ 4 ] and [ 6 ] to select the continuous shutter (CS ) speed you want and the n press [SET].
53 Snapshot Tutorial 8. Press the shutter button th e rest of the way down. This will record the images in the pre-record buffer and start recording new images in real-time. Images continue to be shot as long as you keep the shutter button depressed. 9.
54 Snapshot Tutorial 5. Press [SET] to ap ply the setting. Select & Save After continuous shutter shoot ing is finished, the shot imag es are played back at slow speed so you can select the images you want to save.
55 Snapshot Tutorial • If there is not enough available capacity on the memory card, you may not be able to record the number of CS images indicated o n the monitor screen. Make sure your memory card has sufficient remaining ca pacity before shooting with using continuous shutter.
56 Recording Movies Recording Movies The following procedure explains h ow to record a standard (STD) movie. 1. Set the mode dial to ³ (HD/STD). 2. Press [ 8 ] . 3. Use [ 8 ] and [ 2 ] to select the second control panel option from the t op (HD/STD swit ching).
57 Recording Movies Your camera has a built-in microphone t hat can be used to record audio (monaural) during movie recording. . Recording Precautions The camera also records audio. N ote the following points when shooting a movie. – Take care that the microphone is not blocked by your fingers, etc.
58 Recording Movies NO TE • Continuous Auto Focus is performed dur i ng movie recording when optical zoom is turned on while “ HD/STD ” is selected as the movie mode, regardless of the curren t Continuous AF setting.
59 Recording Movies This camera sup ports recording of high-de finition (HD) movies. The aspect ratio of an HD movie is 16:9, the image size is 1280 x 720 pixels, and the frame rate is 30 fps. Image quality and image size settings cannot be changed. 1.
60 Recording Movies 4. Use [ 4 ] and [ 6 ] to select the frame rate (recording speed) of the movie you want and the n press [SET]. A fast frame rate (such as 1000 fps) will result in a s maller image siz e. 5. Record the movie the same way as you would a normal movie (page 56).
61 Recording Movies With this feature, the camera pre-recor d s up to five seconds of whatever is happening in front of the lens in a buffer t hat is continually updated. Pressing [ 0 ] saves the prerecorded action (buffer con tents) follow ed by real-time recording.
62 Recording Movies The YouTube mode records movies in a form at that is optimal for uploading to the YouTube movie site, which is operated by YouTube, LLC. 1. Set the mode dial to ³ (HD/STD) or © (HS). 2. Press [ 8 ]. 3. Use [ 8 ] and [ 2 ] to select the second cont rol panel opti on from the bottom (You Tube).
63 Recording Movies You can use the following procedu re to turn optical zoom (page 44) on or off while “ HD/STD ” is selected as the movie mode. 1. Set the mode dial to ³ (HD/STD). 2. Press [ 8 ]. 3. Use [ 8 ] and [ 2 ] to select the fourth control panel option from the bottom (Optical Zo om).
64 Using BEST SHOT Using BEST SHOT BEST SHOT provides you with a collection of sample “scenes” that show a variety of different types of shooting conditions. When you need to change the setu p of the camera, simply find the scene that matches wh at you are trying to achieve, and the camera sets up for it automatically.
65 Using BEST SHOT . Using the Sc ene Information Scre en To find out more about a scene, select it with the boundary on the scene menu and then slid e the zoom controller in either direction. • To return to the scene menu, slide the zoom contr oller again.
66 Using BEST SHOT You can save up to 999 camer a setups as user BEST SHOT scenes for instant recall whenever you need them. 1. On the BEST SHOT scene menu, sel ect the scene na med BEST SHOT (Register User Scene). 2. Use [ 4 ] and [ 6 ] to select the snapshot wh ose setup you want to save.
67 Using BEST SHOT With High Speed Night Scene, the camera detec ts automatically whether it is be ing hand-held or on a tripod. When you press the s hutter button, the camera will record a series of image and combine them in a way that minimizes image blur due to low light conditions.
68 Using BEST SHOT When you press the shutter button while High Speed Anti Shake is enabled, the camera records multiple images and automat ically co mbines them in a way that produces a final image with minimal blur.
69 Using BEST SHOT When you point the came ra at a movi ng object and pan as you press the shutter button, the camera will perform a continuous shutter operation, recording multiple images.
70 Using BEST SHOT 5. Release the shutter button. Continuous Shutter shooting will stop and the resulting composite image will appear on the monitor screen. • The above procedure shoots multiple images and combines them automatically into a final image.
71 Using BEST SHOT You can use these features to shoot an image autom atically whenever the subject moves into or moves out of a frame on the monitor screen. You also can configure the camera to record images of what happened immediately before and after the subject moves.
72 Using BEST SHOT 8. Use [ 4 ] and [ 6 ] to select the subject move ment sensitivity, and then press [SET]. • You can select any one of thre e sensitivity levels: “High”, “Normal”, or “Low”. • Move Out CS Setting Guide • Move In CS Setting Guide 9.
73 Using BEST SHOT . To shoot using Mo ve Out CS 1. Compose the image so the subjec t is within the boundary on the monitor screen. 2. Half-press the shutter button. • The camera will adjust exposure and focus automatically. 3. When the bo undary on the moni tor screen turns green, press the shutter button the res t of the way down.
74 Using BEST SHOT . To shoot usin g Move In CS 1. Compose the image at a l ocation wh ere you expect the subject to enter the boundary on the monitor scree n. 2. Half-press the shutter button. • The camera will adjust exposure and focus automatically.
75 Using BEST SHOT NO TE • Compose the image so t he entire subject and its background are within the boundary. Recording may not be performed correctly if ther e is little difference between the subject and the part of the background enclosed by the bound ary.
76 Advanced Settings Advanced Settings The following are menu op erations you can use to configure various camera settings. . Example Menu Screen Operation Press [MENU] to display the menu screen. • Menu contents are different in the REC mode and PLAY mode.
77 Advanced Settings 3. Use [ 8 ] and [ 2 ] to select the menu item you want, and then press [ 6 ]. 4. Use [ 8 ] and [ 2 ] to change the setting. 5. After the setting is the way you want, press [SET]. • Pressing [ 4 ] registers the selected setting and returns to the menu.
78 Advanced Settings Procedure [ r ] (REC) * [MENU] * REC Tab * Self-timer With the Self-timer, pressing the shutter butto n starts a timer. The shutt er is released and the image is shot after a fixed amount of time. • The front lamp flashes while the Self-timer countdown is in progress.
79 Advanced Settings Procedure [ r ] (REC) * [MENU] * REC Tab * AF Assist Light Half-pressing the shutter butto n while this setting is selected causes the front lamp to light, which pr ovides illumination for focusing in ar eas where lighting is dim.
80 Advanced Settings NO TE •O n l y “ A Camera AS” can be used during movie recording. • The ISO sensitivity setting (page 38) must be “AUTO” for “ S Image AS” t o work. • If the flash fires, the Anti Shake icon w ill remain on the display, even though Anti Shake does not function during flash photography.
81 Advanced Settings Tips for Best Face Detection Results • The camera performs center focus if it cannot d etect a face. • Always make sure that Auto Focus (AF) is selected as the focu s mode when shooting with face detection. • Detection of the following ty pes of faces is not supported.
82 Advanced Settings Procedure [ r ] (REC) * [MENU] * REC Tab * AE/AF Lock See page 49 for details. Procedure [ r ] (REC) * [MENU] * REC Tab * Save CS Images See page 53 for details. Procedure [ r ] (REC) * [MENU] * REC Tab * Digital Zoom Select “On” when you want to use digital zoom (page 44).
83 Advanced Settings Procedure [ r ] (REC) * [MENU] * REC Tab * Quick Shutter When Quick Shutter is turned on, you can pr ess the shutter button all the way without waiting for Auto Focus. This will record the image using a high-speed focus operation that is much faster than Auto Focus.
84 Advanced Settings Procedure [ r ] (REC) * [MENU] * REC Tab * Icon He lp While Icon Help is turned on, a textual description will app ear on the display for certain icons when you switch between REC functions.
85 Advanced Settings Procedure [ r ] (REC) * [MENU] * Quality Tab * T Quality (Snapshot) • The “Fine” setting helps to bring out det ails when shooting a finely detailed image that includes dense t ree branches or leaves, or an image of a comple x pattern.
86 Advanced Settings Procedure [ r ] (REC) * [MENU] * Quality Tab * Flash Intensity You can specify flash intensity to one of 13 leve ls from +2 (brightest flash) to –2 (least bright flash). • Flash intensity may not change when the subject is too far away o r too close.
87 Advanced Settings Procedure [ r ] (REC) * [MENU] * Quality Tab * Sharpness You can specify one of five sh arpness settings from +2 (sharpest) to –2 (least sharp). Procedure [ r ] (REC) * [MENU] * Quality Tab * S aturation You can specify one of five satura tion setti ngs from +2 (most saturated) to –2 (least saturated).
88 Viewing Snapshots and Movies Viewing Snapshots and Movies See page 24 for the procedure for viewing snapshots. 1. Press [ p ] (PLAY) and th en use [ 4 ] and [ 6 ] to display the movie you want to view. 2. Press [SET] to start playback. Movie Playback Controls • Playback may not be possible for movies not recorded with this camera.
89 Viewing Snapshots and Movies Each time you perform a continuous shutter (CS) operation, the camera creates a CS group that includes all of the images for that particular CS session. You can use the fo llowing procedure to play back the images in a particular CS group.
90 Viewing Snapshots and Movies You can use the following procedu res to del ete images while playback is in progress or paused. . Deleting a Specific CS Gro up File 1. While CS image pla yback is in progress or paused, press [ 2 ]. 2. Use [ 4 ] and [ 6 ] to di splay the image you want to delete.
91 Viewing Snapshots and Movies . Dividing Up Al l CS Groups 1. While a CS group fo lder is displaye d, press [MENU]. 2. Use [ 4 ] and [ 6 ] to select “PLAY”. 3. Use [ 8 ] and [ 2 ] to select “Divide Gr oup” and then press [ 6 ]. 4. Use [ 8 ] and [ 2 ] to select “Divide All Groups” and then press [SET].
92 Viewing Snapshots and Movies 1. In the PLAY mode, use [ 4 ] and [ 6 ] to scroll thr ough the images until the one you want is dis played. 2. Slide the zoom co ntroller towards z ( [ ) to zoom. You can use [ 8 ], [ 2 ], [ 4 ], and [ 6 ] to scroll the zoomed image on the monitor screen.
93 Viewing Snapshots and Movies 1. Use the AV cable t hat comes with th e camera to connect it to the TV. • Make sure that you insert the cable connector into the USB/AV port un til you feel it click securely into place. Failure to insert the connector fully can result in poor communication or malfunction.
94 Viewing Snapshots and Movies 3. Press [ p ] (PLAY) to turn on the camera. This will cause an image to appear on the TV screen, without anything ap pearing on the camera’s monitor screen. • Pressing [ON/OFF] or [ r ] (REC) will not turn on the camera while the AV cable is connected.
95 Other Playback Functions (PLAY) Other Playback Functions (PLAY) This section explains menu items that you can use to configure settings and perform other playback operations. Procedure [ p ] (PLAY) * [MENU] * PLAY Tab * Slideshow For information about menu operations, see page 76 .
96 Other Playback Functions (PLAY) • To stop the slideshow, press [SET] or [MENU]. Pressing [MENU] stops the slideshow and returns to the menu screen. • Adjust audio volume by pressing [ 8 ] or [ 2 ] during playback. • All button operations are disabled while the slideshow is transitioning from on e image to another.
97 Other Playback Functions (PLAY) Procedure [ p ] (PLAY) * Movie Screen of Movie to be Edited * [MENU] * PLAY Tab * Movie Ed iting The Movie Editing feature lets you use one of the follow ing procedures to edit out a specific part of a movie. 1. Use [ 8 ] and [ 2 ] to select the editing method yo u want to use and then press [SET].
98 Other Playback Functions (PLAY) 3. When the frame where you want the cut point to be is displayed, press [ 2 ]. 4. Use [ 8 ] and [ 2 ] to select “Yes” an d then press [SET]. The selected cut operation will take cons iderable time to complete. Don’t try to perform any camera operation until the “Busy.
99 Other Playback Functions (PLAY) Procedure [ p ] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * White Balanc e You can use the white balance setting to select a light source type for a recorded image, which will affect the colors of the image. NO TE • You also can adjust the white balan ce when recording images (page 38).
100 Other Playback Functions (PLAY) Procedure [ p ] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Brightness You can select one of five brightness levels , from +2 (brightest) to –2 (least bright). NO TE • The original snapshot is retained in memory and not deleted.
101 Other Playback Functions (PLAY) Procedure [ p ] (PLAY) * [MENU] * PLAY Tab * Protect IMPORT ANT! • Note that even if a file is protected, it will be deleted if you perform the format operation (page 135). NO TE • Performing the above procedure while a CS gr oup folder is displayed will protect all the images in the CS group folder.
102 Other Playback Functions (PLAY) Procedure [ p ] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Rotati on 1. Use [ 8 ] and [ 2 ] to select “Rotation ” and then press [SET]. Each press of [SET] will rotate the displayed image 90 degrees left. 2.
103 Other Playback Functions (PLAY) Procedure [ p ] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Trimming You can crop a snapshot to trim parts you do not need, and save the result in a separate file.
104 Other Playback Functions (PLAY) Procedure [ p ] (PLAY) * [MENU] * PLAY Tab * Divide Group See page 90 for details. Procedure [ p ] (PLAY) * [MENU] * PLAY Tab * Select Frame See page 91 for details.
105 Printing Printing • You can specify which images you want to print, the nu mber of copies, and date stamp settings before printing (page 108). Printing Snapshot s Professiona l Print Se rvice You can take a memory card that contains t he images you want to print to a professional print service and have them printed.
106 Printing You can connect the camera directly to a printer that suppor ts PictBridge and print images without going through a computer. . To set up the camera before connecting to a printer 1. Turn on the camera and press [MENU]. 2. On the “Set U p” tab, select “U SB” and then press [ 6 ].
107 Printing . To print 1. Turn on the prin ter and load paper. 2. Turn on the camera. This will display the print menu screen. 3. Use [ 8 ] and [ 2 ] to select “Paper Size”, and the n press [ 6 ]. 4. Use [ 8 ] and [ 2 ] to select a paper si ze and then press [SET].
108 Printing . Digital Print O rder Format ( DPOF) DPOF is a standard that allows you to include image type, number of copy, and time stamp on/off information on the memory card with the images.
109 Printing . Configuri ng the Same D POF Settings for All the Images Procedure [ p ] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * DPOF Printin g * All image s 1. Use [ 8 ] and [ 2 ] to specify the number of copies. You can specify a value up to 99.
110 Printing . Date Stamp ing You can use one of the following three methods to include the recording date in the printout of an image. . Standards Supported by the Camera • PictBridge This is a standard of the Camera and Imaging Products Association (CIPA).
111 Using the Camera with a Computer Using the Camera with a Computer You can perform the operations described below while the camera is conne cted to a computer. The procedures you need to per form when us ing the camera with your computer and when using the bundled software are different for Windows and the Macintosh.
112 Using the Camera with a Computer Install the required software in acco rdance with the version of Windows you are running and what you want to do. Using the Came ra with a Windo ws Computer When y.
113 Using the Camera with a Computer . Computer System Requiremen ts for Bundled Software Computer system requiremen ts are different for each of the applications.
114 Using the Camera with a Computer 4. Turn off the camera and then use th e USB cable that c omes with the camera to connect it to your computer. • The camera does not draw power over the USB cable. Check the battery level before connecting and make sure it is not too low.
115 Using the Camera with a Computer 7. After you finish copying images, disconne ct the camera from the comput er. Windows Vista, Win dows XP On the camera, press [ON/OFF] to turn off the camera. After making sure that the back lamp is unlit, disconnect the camera from the computer.
116 Using the Camera with a Computer Windows Media Player, which is already installed on most computers, ca n be used for movie playback. To play back a movie , first copy the movie to your computer and then double-click the movie file.
117 Using the Camera with a Computer . To install Yo uTube Uploa der for CASI O 1. On the CD-ROM menu screen, select “YouTube Uploader f or CASIO”. 2. After reading the information about installation conditions and system requirements for installation in the “Read me” file, install Yo uTube Uploader for CASIO.
118 Using the Camera with a Computer 1. Start up your computer, and plac e the bundled CD-RO M into its CD- ROM drive. Normally, this should cause the menu screen to appear automatically. If your computer does not display the menu scre en automatically, navigate to the CD- ROM on your computer and then doubl e-click the “AutoMenu.
119 Using the Camera with a Computer Install the required software in acco rdance with what version of the Macintosh OS you are running and what you want to do. IMPORT ANT! • The camera does not support operation with Mac OS 8.6 or earlier, or Mac OS X 10.
120 Using the Camera with a Computer 4. Turn off the camera and then use th e USB cable that c omes with the camera to connect it to your Macintosh. • The camera does not draw power over the USB cable. Check the battery level before connecting and make sure it is not too low.
121 Using the Camera with a Computer 8. After the copy operation i s complete, drag the dri ve icon to Trash. 9. On the camera, press [ON/OFF] to turn off the camera. After making sure that the gree n back lamp is un li t, disconnect the camera from the comput er.
122 Using the Camera with a Computer . Minimum Computer System Requiremen ts for HD Movie Playback The minimum system requirements de scribed below are necessary to play back HD movies recorded with this camera on a compu ter. • The above are recommended system environments.
123 Using the Camera with a Computer The camera creates a file and saves it each time you shoot a snapsh ot, record a movie, or perform any other ope ration that stores data. Files are grouped by storing them in folders. Each file and folder has its o wn unique name.
124 Using the Camera with a Computer The camera stores images you shoot in accordance with the Design Rule for Camera File System (DCF). . About DCF DCF is a standard that makes it possible to view and print images recorded on one manufacturer’s camera on DCF-compliant de vices pr oduced by other manufacturers.
125 Using the Camera with a Computer . Supported Imag e Files • Image files shot with this camera • DCF-compliant image files This camera may not be able to display an image, even if it is DCF-compliant. When displaying an image recorded on another camera , it may take a long time for the image to appear on this camera’s monitor screen.
126 Other Settings (Set Up) Other Settings (Set Up) This section explains menu items that you can use to configure settings and perform other operations in both the REC mode and PLAY mode.
127 Other Settings (Set Up) Procedure [MENU] * Set Up Tab * Sounds • Setting a volume level of 0 mutes output. Procedure [MENU] * Set Up Tab * File No. Use the following procedure to specify the rule that governs generation of the serial number used in file names (page 123).
128 Other Settings (Set Up) Procedure [MENU] * Set Up Tab * World Time You can use the World Time scre en to view the current time in a zone that is dif ferent from your Home City when you go on a trip, et c. World Time disp lays the current time in 162 cities in 32 time zones around the globe.
129 Other Settings (Set Up) Procedure [MENU] * Set Up Tab * Timestamp You can configure the camera to stamp the recording date only, or date and time in the lower right corner of each snapshot. • Once date and time information is stamped into a sn apshot, it cannot be edited or deleted.
130 Other Settings (Set Up) Procedure [MENU] * Set Up Tab * Date Style You can select from among three different styles for the d ate. Example: December 19, 2009 • This setting also affects the control panel date format as shown below (page 28). YY/MM/DD or MM/DD/YY: MM/DD DD/MM/YY: DD/MM Procedure [MENU] * Set Up Tab * Language .
131 Other Settings (Set Up) Procedure [MENU] * Set Up Tab * Sleep This feature turns o ff the monitor screen whenever no camera operation is perform ed for a preset amount of time. Press any button to turn the monitor screen back on. Trigger Time Settings: 30 sec, 1 min, 2 mi n, Off (Sleep is disa bled while “Off” is selected.
132 Other Settings (Set Up) Procedure [MENU] * Set Up Tab * REC/PLAY • With “Power On/Off”, the camera turns off when you pr ess [ r ] (REC) in the REC mode or [ p ] (PLAY) in the PLAY mode. • Change this setting to anything besides “D isable” before connecting to a TV for image viewing.
133 Other Settings (Set Up) Procedure [MENU] * Set Up Tab * USB You can use the procedure below to select the USB communication protocol, which is used when exchanging data with a computer, printer, or other external device.
134 Other Settings (Set Up) Procedure [MENU] * Set Up Tab * Battery Type See page 15 for details. Procedure [MENU] * Set Up Tab * Startup Display the image you want to use as yo ur startup image and then select “On”. • The startup image does not appear when you turn on the camera by pressing [ p ] (PLAY).
135 Other Settings (Set Up) Procedure [MENU] * Set Up Tab * Format If a memory card is load ed in the camera, this operation will format the me mory card. It will format built-in memory if no memory card is loaded. • The format operation will delete all conten ts on the memor y card or in built-in memory.
136 Configuring Monitor Scre en Settings Configuring Monitor Screen Settings [ Each press of [DISP] will cycle through display settings that display or hide on-screen information and the control panel. You can configure separate settings for the REC mode and PLAY mode.
137 Configuring Monitor Scre en Settings Displays a histogram on the monitor screen which you can u se to check the exposure of an image befo re you shoot it. You also can display the histogram in the PLAY mode for information about the exposure levels of images.
138 Configuring Monitor Scre en Settings A histogram is a graph that represents the lightness of an image in terms of the number of pixels. The vertical axis indica tes the number of pixels, while the horizontal axis indicates lightness.
139 Appendix Appendix . Avoid Use While In Motio n • Never use the camera to record or pl ay back images while operating an automobile or other vehicle, or while walking. Lookin g at the monitor while in motion creates the risk of serious accident. .
140 Appendix . Smoke, abnormal odor, overheating , and other abnormal ities • Continued use of the camera while it is emitting smoke or strange odor, or while it is overheating creates the risk of fire and elect ric shock. Immediately perform the following steps whenever any of the abo ve symptoms are present.
141 Appendix . Locations To Be Avoide d • Never leave the camera in any of the following type s of locations. Doing so creates the risk of fire and electric shock.
142 Appendix . Alkaline Batteries • Should liquid from an alkaline battery ever get into your eyes, t ake the following steps. 1. Immediately rinse your eyes with clean w ater. Do not rub! 2. See a physician as soon a s possible. Failure to clean alkaline battery fluid from t he eyes creates the risk of loss of sight.
143 Appendix . Battery Life • The battery lives noted in the User’s Guide are approximate values until power fails, based on use of batteries of recommended brands at temperatur e 23°C (73°F), and do not guarantee you will be abl e to achieve o peration for the life noted.
144 Appendix . Condensation Sudden and extreme temperature changes, such as when the camera is moved from the outdoors on a cold winter day into a warm room, can cause water droplets called “condensation” to form on the interior and the exterior of the camera, which creates the risk of malfunction.
145 Appendix . Copyrights Except for your own personal enjoyment, unau thorized use of use of snapshot s or movies of images whose rig hts belong to others, without the permission of the right holder, is forbidden by copyright laws . In some cases, shooting of public performances, shows, exhibitions , etc.
146 Appendix Any and all unauthorized commercial copying, distribution, and copying of the bundled software over a networ k are prohibited. This product contains PrKERNELv4 Real- time OS of eSOL Co., Ltd. Copyright © 2007 eSOL Co ., Ltd. PrKERNELv4 is a registered trademark of eSOL Co.
147 Appendix . Storage Precautions • Always remove the batteries from the camera when yo u are not using it. Leaving batteries in the camera can cause it to discharge and go de ad, which will lead to malfunction of the camera. • Remove batteries from the camera if you do n ot plan to use it for about two weeks or more.
148 Appendix . Alkaline Battery Life The actual life of alkaline batteries is affected by a var iety of factors, including the battery manufacturer, the amount of time the batteries spend in storage b efore you use them, temperature while you are r ecording, and photographic conditions.
149 Appendix . Using Recharg eable Batteries In the case of rechargeable b atteries, us e of one of the rechargeable Ni-MH (nickel metal hydride) batteries (HR6) listed below is recommended. • SANYO eneloop (SANYO Electric Co., Ltd.) • DURACELL RECHARGEABLE (DURACELL, div of P&G Inc.
150 Appendix You need to purchase the optio nally available AC adaptor (AD-C100) in order to b e able to power the ca mera using a household power supply. 1. Connect the power cord to the AC adaptor. 2. Open the camera’s terminal cover an d connect the AC adaptor to the terminal marked [ ].
151 Appendix . Precautions when Using the AC Adaptor • Connecting the AC adaptor to the camera does n ot charge the batteries. • Make sure that the camera is turned off before connecting or disconne cting the AC adaptor.
152 Appendix . Using a Memory Card • SD memory cards and SDHC memory car ds have a write protect switch. Use the switch when you need to guard against accidentally deleting data.
153 Appendix Computer system requiremen ts are different for each of the applications. Be sure to check the requirements for the particular a ppl ication you are trying to use. Note that the values provided here are minimum r equirements f or running each application.
154 Appendix The numbers in parentheses indicate t he pages w here each item is explained. . Camera General Guide 1 Shutter button (page 20) 2 [ON/OFF] (Power) (page 19) 3 Front lamp (pages 78, 79) 4 .
155 Appendix dm dn do dl Bottom dl Battery compartment (pages 12, 146) dm Tripod hole Use this hole when attaching to a tripod. dn Lock (page 12) do Battery cover (pages 12, 146).
156 Appendix The monitor screen uses various indicators , icons, and values to keep you informed of the camera’s status. • The sample screens in this section are intended to show you the locations of all the indicators and figures that can appear on the monitor screen in various modes.
157 Appendix . Movie Recording . Snapshot Viewing 1 Recording mode (page 56) 2 Record: Off (page 63) 3 Remaining movie memory capacity (page 169) 4 Movie quality (HD /STD movie) (pages 56 , 59)/ Recor.
158 Appendix . Movie Playback . CS Image Viewing 1 File type 2 Protect indicator (page 101) 3 Folder name/file name (page 123) 4 Movie recording time (page 88) 5 Movie Quality/Speed (pages 56, 59) 6 P.
159 Appendix The tables in this section show the initia l default settings that are configured for menu items (displayed when you press [MENU]) af ter you reset the camera (page 135). Menu items depend on whet her the camera is in the REC mode or PLAY mode.
160 Appendix “Set Up” Tab . PLAY Mode “PLAY” Tab “Set Up” Tab • The contents of the “Set Up” tab are the same in the REC mode and PLAY mode. Screen Auto 2 EVF Brightness 0 Sounds Startup: Sound 1 / Half Shut ter: Sound 1 / Shutter: Sound 1 / Operation: Sound 1 / = Operation: .
161 Appendix When things don’t go rig ht... Troubleshooting Problem Poss ible Cause and Rec ommended Action Power Supply Power does not turn on. 1) The batteries may not be loaded cor rectly (p age 12). 2) The batteries may be dea d. The camera suddenly powers down.
162 Appendix The flash does not fire. 1) If ? (Flash Off) is selected as t he flash mod e, change to another m ode (page 35). 2) If battery power i s load, repl ace them with a full set o f new ones.
163 Appendix Subjects ar e too dark when shooting images in a seashore or ski area. Sunlight r eflected by wat er, sand, or snow, can cause underexpos ure of images. Chan ge the flash mode se tting to < (Flash On) fo r daylight s ynchro flash (p age 35), or adjus t EV shift to the + side (pag e 40).
164 Appendix Other The wrong date and time are displayed. The date a nd time setti ng is off. Set the correct date and time (page 129). The messages on the display are in the wrong language. The wrong disp lay language is selected. Ch ange the display language set ting (page 130) .
165 Appendix Display Messages ALERT The camera’s protection function may have activated because camera temperature is too high. Turn off the camera and wait until it cools down before tr ying to use it again. Battery is low. Battery power is low. Camera not in standby.
166 Appendix Folder cannot be create d. You are trying to record a fi le while there are already 9999 files stored in the 999th folder. If you want to record more, delete files you no longer need (page 25). LENS ERROR This message appears and the camera turns off whenever lens performs some unexpected operation.
167 Appendix This file cannot be played. The file you are trying to access is corrupted or is a type that cannot be displayed by this camera. This funct ion cann ot be used. • You attempted to copy images from built-in memory to a memory card while there is no memory card loaded in the camera (page 103).
168 Appendix Snapshot Number of Snapshots and Movie R ecording Time Image Size (Pixels) Image Quality Approximate Image File Size Built-in Memory Snapshot Recording Capacity SD Memory Card (1GB) Snapshot Recording Capacity RAW+ (9M: 3456 x 2592 ) *1 Fine 19.
169 Appendix Movies Movie Mode Image Q uality (Pixels) / (Audio) Approximate Data Rate (Frame Rate) Built-in Memory Movi e Recording Capacity SD Memory Card (1GB) Movie Recording Capacity File Size of.
170 Appendix • Snapshot and mov ie recordin g capacity valu es are approxi mate and intende d for reference on ly. Actual ca pacity depends on image conten ts. • File size and d ata rate values are approximat e and intended f or referenc e only. Actual values depend on the type of im age being shot .
171 Appendix Specifi cations File Forma t Snapshots: RAW (DNG), JPEG (Exif Vers ion 2.2); DCF 1.0 standard; DPO F compliant * DNG file format is one type of RAW image file, and it is recommended by Adobe Systems fo r use as a standa rd image file f ormat.
172 Appendix Exposure Compens ation –2.0 EV to +2.0 EV (i n 1/3EV steps) Shutter CMO S electronic shutter, mec hanical sh utter Shutter Spe ed Snapshot (Aut o): 1 to 1/20 00 second Snapshot (Apertur.
173 Appendix World Time 162 ci ties in 32 time zone s City name, date, time, summer time Input/Output Terminals USB/AV port, Hi- Speed USB compatibl e AC adaptor conn ector (DC-IN ) Microphone Monaura.
174 Appendix Approximate Battery Life All of the values provided below represent the approximate amount o f time under normal temperature (23°C (73°F )) before the camera turns off. These values ar e not guaranteed. Low temperatures shor ten battery life.
175 Appendix *1 Approximat e number of shots (CI PA) (Operati ng Time) In accordance with CIPA standards Normal temperat ure (23°C (73°F) ), monitor on, zoom op eration betwee n full wide and full tele photo every 30 sec onds, during which two image s are shot with fl ash; power turned off and back o n every time 10 images a re shot.
CASIO COMPUTER CO.,LTD. 6-2, Hon-machi 1-chome Shibuya-ku, Tokyo 151-8543, Japan MA0810-B M10.
デバイスCasio EX-FH20の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Casio EX-FH20をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCasio EX-FH20の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Casio EX-FH20の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Casio EX-FH20で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Casio EX-FH20を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCasio EX-FH20の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Casio EX-FH20に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCasio EX-FH20デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
