Casioメーカーfx-570ES PLUSの使用説明書/サービス説明書
ページ先へ移動 of 46
E f x - 570ES PLUS f x - 991ES PLUS User’ s Guide CASIO Worldwide Education Website http://edu.casio.com CASIO EDUCATIONAL FORUM http://edu.casio.com/forum/.
Contents Important Information ............................................................. 2 Sample Operations .................................................................. 2 Initializing the Calculator .........................................
E-2 Important Infor mation • The displays and illustrations (such as key markings) shown in this User’s Guide are for illustrative purposes only, and may differ somewhat from the actual items they represent. • The contents of this manual are subject to change without notice.
E-3 • Never try to take the calculator apar t. • Use a soft, dry cloth to clean the e xterior of the calculator . • Whenever discarding the calculator or batteries, be sure to do so in accordance with the laws and regulations in y our particular area.
E-4 Reading the Display The display of the calculator shows expressions you input, calculation results, and various indicators. Input expression Indicators Calculation result • If a indicator appears on the right side of the calculation result, it means the displayed calculation result continues to the right.
E-5 Disp The display currently shows an intermediate result of a multi-statement calculation. Important: For some type of calculation that takes a long time to execute, the display may show only the above indicators (without any value) while it performs the calculation internally.
E-6 Linear Display (LineIO) causes fractions and other expressions to be displayed in a single line. Note: • The calculator switches to Linear Display automatically whenever you enter the STAT, BASE-N, MATRIX, or VECTOR Mode.
E-7 Initializing Calculator Settings Perform the following procedure to initialize the calculator, which returns the calculation mode to COMP and returns all other settings, including setup menu settings, to their initial defaults.
E-8 1st Parenthetical expressions 2nd Functions that require an argument to the right and a closing parenthesis “)” following the argument. 3rd Functions that come after the input value ( x 2 , x .
E-9 Using V alues and Expressions as Ar guments (Natural Display onl y) A value or an expression that you have already input can be used as the argument of a function. After you have input 7 6 , for example, you can make it the argument of , resulting in 7 6 ' .
E-10 P ÷ 6 = 1 6 = 0.5235987756 ( P ) 6 1 6 f 0.5235987756 ( ' 2 + 2) s ' 3 = ' 6 + 2 ' 3 = 5.913591358 2 C 2 3 ' 6 + 2 ' 3 f 5.
E-11 P ercent Calculations Inputting a value and pressing (%) causes the input value to become a percent. 150 s 20% = 30 150 20 (%) 30 Calculate what percentage of 880 is 660. (75%) 660 880 (%) 75 Increase 2500 by 15%.
E-12 Transform the value 123 to engineering notation, shifting the decimal point to the left. 123 123 $ ( k ) 0.123×10 3 $ ( k ) 0.000123×10 6 Calculation History In the COMP, CMPLX, or BASE-N Mode, the calculator remembers up to approximately 200 bytes of data for the newest calculation.
E-13 V ariab les (A, B, C, D , E, F , X, Y) Your calculator has eight preset variables named A, B, C, D, E, F, X, and Y. You can assign values to variables and also use the variables in calculations.
E-14 °, r , g : These functions specify the angle unit. ° specifies degrees, r radians, and g grads. Input a function from the menu that appears when you perform the following key operation: (DRG ). See 3 . , : Exponential functions.
E-15 x ! : Factorial function. See 12 . Abs : Absolute value function. Note that the input method is different depending upon whether you are using Natural Display or Linear Display. See 13 . Ran# : Generates a 3-digit pseudo random number that is less than 1.
E-16 Tips for Successful Integration Calculations When a periodic function or integration interval results in positive and negative f ( x ) function values Perform separate integrations for each cycle, or for the positive part and the negative part, and then combine the results.
E-17 To calculate ' 2 × 3 (= 3 ' 2 = 4.242640687...) to three decimal places (Fix 3) (SETUP) (Fix) 2 C 3 3 ' 2 4.
E-18 To generate random integers in the range of 1 to 6 (RanInt) 1 (,) 6 2 6 1 (Results shown here are for illustrative purposes only.
E-19 To obtain the conjugate complex number of 2 + 3 i (Complex number format: a + b i ) (CMPLX) (Conjg) 2 3 $ ( i ) 2–3 i To obtain the absolute value and argument of 1 + i .
E-20 7 20 To exit CALC: To store A + B i and then determine ' 3 + i , 1 + ' 3 i using polar coordinates ( r θ ) B (CMPLX) (A) 4 (B) $ ( i ) (CMPLX) .
E-21 0 1 2 Current value of X Input an initial value for X (Here, input 1): 1 To exit SOLVE: Solution screen Note: During the time from when you press < (SOLVE) until you exit SOLVE by pressing , you should use Linear Display input procedures for input.
E-22 3 Input an initial value for X (Here, input 1): 1 7 13 Statistical Calculations (ST A T) To start a statistical calculation, perform the key operation (STAT) to enter the STAT Mode and then use the screen that appears to select the type of calculation you want to perform.
E-23 Note: Use the FREQ (frequency) column to input the quantity (frequency) of identical data items. Display of the FREQ column can be turned on (displayed) or off (not displayed) using the Stat Format setting on the setup menu.
E-24 • See the table at the beginning of this section of the manual for the regression formulas. • K , K 1 , K 2 and L are not variables. They are commands of the type that take an argument immediately before them. See “Calculating Estimated Values” for more information.
E-25 Calculating Estimated V alues Based on the regression formula obtained by paired-variable statistical calculation, the estimated value of y can be calculated for a given x -value. The corresponding x -value (two values, x 1 and x 2 , in the case of quadratic regression) also can be calculated for a value of y in the regression formula.
E-26 (STAT) (Distr) (P() Results: Normalized variate ( t ): –0.762 P( t ): 0.223 Base- n Calculations (BASE-N) Press (BASE-N) to enter the BASE-N Mode when you want to perform calculations using decimal, hexadecimal, binary, and/or octal values.
E-27 Hexadecimal Positive: 00000000 x 7FFFFFFF Negative: 80000000 x FFFFFFFF Specifying the Number Mode of a P articular Input V alue You can input a special command immediately following a value to specify the number mode of that value.
E-28 To determine the bitwise complement of 1010 2 (Not(1010 2 )) (BASE) (Not) 1010 1111111111110101 To negate (take the two’s complement) of 101101 2 (Neg(101101 2 )) .
E-29 EQN Mode Calculation Examples x + 2 y = 3, 2 x + 3 y = 4 (EQN) (a n X + b n Y = c n ) 1 2 3 2 3 4 (X=) –1 A (Y=) 2 x – y + z = 2, x + y – z = 0, – .
E-30 1. Press (MATRIX) to enter the MATRIX Mode. 2. Press (MatA) (2 s 2). • This will display the Matrix Editor for input of the elements of the 2 s 2 matrix you specified for MatA. “A” stands for “MatA”. 3. Input the elements of MatA: 2 1 1 1 .
E-31 3. Use the Matrix Editor that appears to input the elements of the matrix. To assign 1 0 –1 0 –1 1 to MatC (MATRIX) (Dim) (MatC) (2 s 3) 1 0 1 0 1 1 T o edit the elements of a matrix v ariable: 1.
E-32 Obtain the absolute value of each element of MatB (Abs(MatB)). @ (Abs) MatB Determine the square and cube of MatA (MatA 2 , MatA 3 ). Note: You cannot use for this input. Use 7 to specify squaring, and 7 ( x 3 ) to specify cubing.
E-33 (X) V 1 2 1 1 0.5 Note: • You can use the number table screen for viewing values only. Table contents cannot be edited.
E-34 V ector Ans wer Memory Whenever the result of a calculation executed in the VECTOR Mode is a vector, the VctAns screen will appear with the result. The result also will be assigned to a variable named “VctAns”. The VctAns variable can be used in calculations as described below.
E-35 3 × VctA (Vector scalar multiplication), 3 × VctA – VctB (Calculation example using VctAns) 3 VctA VctB VctA • VctB (Vector dot product) VctA (VECTOR) (Dot) VctB VctA s VctB (Vector cross product) VctA VctB Obtain the absolute values of VctC.
E-36 To input the scientific constant C 0 (speed of light in a vacuum), and display its value (CONST) (C 0 ) To calculate C 0 = 1 0 0 1 A (CONST) ( E 0 ) (CONST) ( μ 0 ) The following shows the two-digit numbers for each of the scientific constants.
E-37 33: ( μ 0 ) magnetic constant 34: ( F 0 ) magnetic flux quantum 35: (g) standard acceleration of gravity 36: (G 0 ) conductance quantum 37: (Z 0 ) characteristic impedance of vacuum 38: (t) Cels.
E-38 25: atm Pa 26: Pa atm 27: mmHg Pa 28: Pa mmHg 29: hp kW 30: kW hp 31: kgf/cm 2 Pa 32: Pa kgf/cm 2 33: kgf • m J 34: J kgf • m 35: lbf/in 2 kPa 36: .
E-39 tanh –1 x 0 x 9.999999999 s 10 –1 log x /ln x 0 x 9.999999999 s 10 99 10 x –9.999999999 s 10 99 x 99.
E-40 Errors The calculator will display an error message whenever an error occurs for any reason during a calculation. There are two ways to exit an error message display: Pressing B or C to display the location of the error, or pressing to clear the message and calculation.
E-41 Action: Make necessary corrections. Argument ERROR Cause: There is a problem with the argument of the calculation you are performing. Action: Make necessary corrections. Dimension ERROR (MA TRIX and VECT OR Modes only) Cause: • The matrix or vector you are trying to use in a calculation was input without specifying its dimension.
E-42 For details about initialized settings, see “Configuring the Calculator Setup”. 4. Initialize all modes and settings by performing the following operation: (CLR) (Setup) (Yes).
E-43 Appro ximate Weight: fx-570ES PLUS: 100 g (3.5 oz) including the battery fx-991ES PLUS: 95 g (3.4 oz) including the battery Frequently Asked Questions I How can I perf orm input and display results the same wa y I did on a model that does not have Natural T extbook Displa y? Perform the following key operation: (SETUP) (LineIO).
Manufacturer: CASIO COMPUTER CO., LTD. 6-2, Hon-machi 1-chome Shibuya-ku, Tokyo 151-8543, Japan Responsible within the European Union: CASIO EUROPE GmbH Bornbarch 10 22848 Norderstedt, Germany This mark applies in EU countries only.
CASIO COMPUTER CO ., L TD. 6-2, Hon-machi 1-chome Shibuya-ku, T okyo 151-8543, Japan SA0802-A.
デバイスCasio fx-570ES PLUSの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Casio fx-570ES PLUSをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCasio fx-570ES PLUSの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Casio fx-570ES PLUSの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Casio fx-570ES PLUSで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Casio fx-570ES PLUSを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCasio fx-570ES PLUSの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Casio fx-570ES PLUSに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCasio fx-570ES PLUSデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
