Ciscoメーカー3000の使用説明書/サービス説明書
ページ先へ移動 of 248
Americas Hea dquarters Cisc o Syst ems , Inc . 170 West Ta sman Driv e San Jos e, CA 95 134-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553- NETS (638 7) Fax: 408 527-0883 Cisco T elePresence.
THE SPECIFICATIONS AND INFORMATION REGARDING TH E PRODUCTS IN THIS MANUAL ARE SUBJE CT TO CHANGE WITHOUT NO TICE. ALL STATEMENT S, INFORMATI ON, AND RE COMMENDATIONS IN T HIS MA NUAL ARE BELI EVED TO BE ACCURATE BUT ARE P RESENTED WITHOUT WARRANTY OF ANY KIND, EXPRE SS OR IMPLIED.
iii Cisco T elePresen ce System 3000 OL-14521-01 CONTENTS Preface ix Introd uct ion i-ix Conv enti ons i-ix Obtain ing Docu mentat ion, Obt aining Su pport , and Secur ity Gui deline s i-x Relat ed D .
Cont ents iv Cisco Tele Presence Syste m 3000 OL-14521-01 Buildi ng the Table Assemb ly, Pr oduct ID CT S3K-FUR -MAPLE 6-5 Buildi ng the Table Assemb ly, Pr oduct ID CT S3K-M-T ABLE-G2 6-18 Assemblin .
Content s v Cisco T elePresen ce System 3000 OL-14521-01 Remo vin g the Cam era Cluste r 11-4 Replac ing a Pl asma Displa y—Part Nu mber CTS- DISP-65- GEN4= 11-6 Requir ed Infor mation , Tools, and .
Cont ents vi Cisco Tele Presence Syste m 3000 OL-14521-01 Requir ed Infor mation , Tools, and Equipme nt 11-30 Removing and Repl acing a Tab le T op Se ction 11-30 Parts Li st Sorte d by Carton A-1 Ov.
Content s vii Cisco T elePresen ce System 3000 OL-14521-01 Carton 32 of 44: Camer a Targe t, 6 9-1674- xx, CTS - CAM-TOOL A-10 Cart on 33 of 44 : Dis play Stru ctur e Cro ssba rs, 69 -16 23- xx, CT S3.
Cont ents viii Cisco Tele Presence Syste m 3000 OL-14521-01.
ix Cisco T elePresen ce System 3000 OL-14521-01 Preface Revised: October 31, 2008, OL- 14521-01 Introduction The Cisco T ele Pr esence 300 0 Assembly Guide outline s the steps and best p ract ices fo r as sembling and installing the Cisco T elePresen ce 3000.
x Cisco Tele Presence Syste m 3000 OL-14521-01 Preface Obtaining D ocumentat ion, Obtai ning Suppor t, and Secur ity Gui delines Ti p Means the inf ormation cont ains useful tips.
CH A P T E R 1-1 Cisco TelePre sence System 3000 OL-14521-01 1 Overview Revised: October 31, 2008, OL- 14521-01 Chapter Organization Chapter 1, “Overview” (this chapter) Provides c hapter organization and co ntent of th is do cument and i ncludes a n overview of the assemb ly steps y ou pe rform.
1-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Ch apter 1 Ov erv iew Chapter Organiza tion • Each element is desc ribed using one or mo re ill ustrat ions.
1-3 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 Overview Assembly Overv iew Figu re 1 -1 View of an As semb led C isc o T elePresen ce System 3 0 0 0 Assembly Overview Perform the follo wing steps to install a CTS 3000: Step 1 Build the display assembly .
1-4 Cisco Tele Presence Syste m 3000 OL-14521-01 Ch apter 1 Ov erv iew Convention s and Te rminology c. Inst all the I/O Mod ules for th e table le g power an d Ethern et conn ections and connec t the Eth ernet cable s.
1-5 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 Overview Tools and Eq uipme nt List Figur e 1 -2 Cable Connection La beling S ystem Tools and Equ ipment List T o assemb le the Cisc o T elePr.
1-6 Cisco Tele Presence Syste m 3000 OL-14521-01 Ch apter 1 Ov erv iew Tools and Equ ipm ent List.
CH A P T E R 2-1 Cisco TelePre sence System 3000 OL-14521-01 2 Building the Display Assembly Revised: Februar y 10, 2010, OL-14521 -01 Parts List Key Part Description Part Number Qty Ctn Notes 1 Displ.
2-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 2 Building the Display Assembly Parts Li st Cautio n The disp lay stru ctures are unstabl e durin g assemb ly . Use c aution, a nd suppor t all struc tures as re quired . Cautio n Some system component s hav e metal and plastic ed ges with hard angles.
2-3 Cisco TelePre sence System 3000 OL-14521-01 Chapter 2 Buildin g the Dis play Assem bly Parts List Step 2 Attach th e Codec Safety tra ys to the Front F oot stab ilizers . Note If you ordere d a Presen tation Cod ec, atta ch the lar ger tra y that comes with the Pres entation Codec packag e, pa rt no.
2-4 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 2 Building the Display Assembly Parts Li st Step 3 Attach the Rear and Front Foot stabi lizers to the Display structur es.
2-5 Cisco TelePre sence System 3000 OL-14521-01 Chapter 2 Buildin g the Dis play Assem bly Parts List Step 4 Attach the left and right Display Shel f supports t o each Displa y structure.
2-6 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 2 Building the Display Assembly Parts Li st Step 5 Attach the D isplay T ilt br acket s to e ach Dis play st ructur e. Figur e 2-5 Displa y Tilt b rac k ets Note Do not tighten the Disp lay T ilt brack ets.
2-7 Cisco TelePre sence System 3000 OL-14521-01 Chapter 2 Buildin g the Dis play Assem bly Parts List Step 6 Attach th e Camera Assem bly brack et to the center Display str ucture. Figu re 2-6 Cam era Ass emb ly bracket Note Th e Came ra Asse mbly bra cket atta ches to the ce nte r Disp lay stru ctur e.
2-8 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 2 Building the Display Assembly Parts Li st Step 7 Attach t he upp er and lower Suppor t crossba rs to t he left an d right Display structur es. Figur e 2-7 Upper and Low er Support cr ossbars Ti p Use the screw holes near est the ends of the Support cro ssbars.
2-9 Cisco TelePre sence System 3000 OL-14521-01 Chapter 2 Buildin g the Dis play Assem bly Parts List Step 8 Attach t he upp er and lower Suppor t crossba rs to the cent er Displ ay struc ture.
2-10 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 2 Building the Display Assembly Parts Li st Step 9 Position the three Disp lay structu res relati ve to the rear w all. Note Using the measur ements p rov ided i n Figure 2- 9 , there will be approx imately 3 inche s (8 cm) of space between the light reflector and t he wal l.
CH A P T E R 3-1 Cisco TelePre sence System 3000 OL-14521-01 3 Mounting and Leveling the Plasma Displays Revised: September 16, 2009, OL-1 4521-01 Parts List War ni n g Only trained and qualified personnel s hould be allowed to install , replace, or service this equipment.
3-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 3 Mounting and Leveling the Plasma Displays Parts Li st Cautio n Some system component s hav e metal and plastic ed ges with hard angles. T hese edges are e xposed until you comp lete syst em assembl y .
3-3 Cisco TelePre sence System 3000 OL-14521-01 Chapter 3 Mounting and L eveling the Plasma Display s Parts List Step 1 Hang the lef t, cent er , and ri ght Pl asma dis pla ys on t he Dis play struc ture cross bars Caution M ake sure the Plas ma disp lay Leveling feet rema in firmly sea ted on t op of t he Disp lay shelf supports.
3-4 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 3 Mounting and Leveling the Plasma Displays Parts Li st Step 2 Attach the Display shelves to t he Display shelf supports Figur e 3-2 At tac h the D ispla y she lves to the Dis play shelf s uppor ts Note The Display shelves are use d in this chapter for le ve ling purpose s only .
3-5 Cisco TelePre sence System 3000 OL-14521-01 Chapter 3 Mounting and L eveling the Plasma Display s Purpose of Leveling th e Plasm a displays Purpose of Levelin g the Plasma displays The three Pl asma display s act a s windo ws all owi ng a three- way vi ew into the r emote Cisco T elePresence conf erence ro om.
3-6 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 3 Mounting and Leveling the Plasma Displays Purpose of Le veling t he Plasm a displays Levelin g Goals Lev e ling the Display shelves and the P.
3-7 Cisco TelePre sence System 3000 OL-14521-01 Chapter 3 Mounting and L eveling the Plasma Display s Purpose of Leveling th e Plasm a displays Step 5 The surface of the Display shelves should not obstruct any l ines of resolution.
3-8 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 3 Mounting and Leveling the Plasma Displays Purpose of Le veling t he Plasm a displays Step 6 Use the Plasma displa y Le veling feet t o le ve l the Pla sma display s along t he X ax is. Use the Display tilt bra ckets to le ve l the Plasma displays along the Y axis.
3-9 Cisco TelePre sence System 3000 OL-14521-01 Chapter 3 Mounting and L eveling the Plasma Display s Purpose of Leveling th e Plasm a displays Step 7 Align the ed ges of Pla sma d isplays The gap be tween Plas ma displa ys should be uniformly even from the t op edg e of the Plasm a display to the bo ttom ed ge.
3-10 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 3 Mounting and Leveling the Plasma Displays Purpose of Le veling t he Plasm a displays Step 8 Align th e seams of the Disp lay shelv es with the s eams between Plasma displa ys.
3-11 Cisco TelePre sence System 3000 OL-14521-01 Chapter 3 Mounting and L eveling the Plasma Display s Completing the Plasma display setup Completing the Plasma display setup Step 9 Apply t he Black B.
3-12 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 3 Mounting and Leveling the Plasma Displays Completing the Plasma di splay s etup.
CH A P T E R 4-1 Cisco TelePre sence System 3000 OL-14521-01 4 Building the Lightin g Assembly Revised: September 16, 2009, OL-1 4521-01 Parts List Key Part Description Part Number Qty Ctn Notes 1 Lig.
4-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st 14 Refl ector bottom : top side 700-2 3827-x x 2 26 (C TS3K-FUR -MA PLE) 23 (CT S3K -M-T ABLE -G2 .
4-3 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List War ni n g Only trained and qualified personnel s hould be allowed to install , replace, or service this equipment. Cautio n Some system component s hav e m etal and plastic ed ges with hard angl es.
4-4 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 1 Assemble the six Suppor t stru ts and six Lighti ng Sup port br ackets.
4-5 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 2 Attach the left and ri ght outer Supp ort brac kets (from Figure 4-1 ) to the horizontal ba r on the left and right Display structures.
4-6 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 3 Attach the four inne r Support bra ckets to the Supp ort crossb ars. Figur e 4-3 Fou r inner Suppo rt br ack ets (from Figu r e 4-1 ) Note There is no p hysical d ifference betw een the six Support bracket s assemble d in Figu re 4-1 .
4-7 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 4 Attach th e four En d struc ture bra ckets to the ends of the Suppo rt cross bars.
4-8 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 5 Attach th e three Refl ector botto m trays to th e Support br acket s.
4-9 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 6 Attach the t wo Reflector bottom spacers to join the three Refl ector bottom tray s.
4-10 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 7 Attach the l eft and righ t (v ertical) Reflec tor Bottom e nds t o the End Str ucture brack ets and att ach the complian ce sticke r to the left reflector bottom end.
4-11 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 8 Attach the Light Cup brac ket to the l eft and rig ht (v ertical) Reflecto r Bottom e nds.
4-12 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 9 Attach the three 5-foot Light f ixtures inside th e Reflector bottoms.
4-13 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 10 Attach the l e ft and righ t 4-foot Side Lig ht f ixtures to t he left and ri ght (v ertical) Refle ctor Bottom en ds. The power cords fo r the Side Light fixtures shou ld extend from the top of the fixture s ( Figure 4-8 ).
4-14 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 11 Attach th e two center Met al T rim panels.
4-15 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 12 Attach the tw o side Meta l T rim panels.
4-16 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 13 Attach the cen ter Pl astic Di ff user panel.
4-17 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 14 Attach the lef t and rig ht Plastic Dif fuser panels. Note The rounded c orner s of the left an d right Plast ic Diffuser pan els point outward.
4-18 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 15 Attach the fo ur L- brack ets to the tw o (ver tical) e nd Plastic Dif fuser panels .
4-19 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 16 Attach the t wo (v ertical) Plastic D if fuser panels to the End Stru cture b rack ets.
4-20 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 17 Slide the Plast ic Dif fuser Panel br ace be tween the en d (ve rtical ) Plastic Dif fuser panel and the left and right Plastic Dif fuser panels.
4-21 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 18 Attach the cent er Reflecto r top to the c enter Refle ctor bott om.
4-22 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 19 Attach the lef t and rig ht Refle ctor tops to the le ft and r ight Ref lector botto ms. Note Do not tig hten scre ws until co mpleting Figu re 4-2 2 .
4-23 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 20 Join the left, c enter , and rig ht Reflecto r tops with the l eft and right Ref lector T ransition p ieces. Note Do not tig hten scre ws until co mpleting Figu re 4-2 2 .
4-24 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 21 Attach the l eft and righ t (v ertical) Reflec tor en ds to the le ft and right (ve rtical ) Ref lector Bottom ends . Note Do not tig hten scre ws until co mpleting Figu re 4-2 2 .
4-25 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 22 Attach the l eft and r ight c orner Reflecto r T ransition p ieces t o the Reflecto r tops . Note T ighten al l s cre ws from Figure 4-18 t hrough Figure 4-22 .
4-26 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 23 Attach th e two Me tal T rim panels to the L-brack ets attached to the tw o (v ertical) Plastic Dif fuser panels. Note The se Metal T rim panels cove r the access opening us ed to route cables.
CH A P T E R 5-1 Cisco TelePre sence System 3000 OL-14521-01 5 Building the Display Shelf Assembly Revised: Novembe r 30, 2009, OL-1 4521-0 1 Parts List Key Part Descr iption Part Numb er Qty Ctn Note.
5-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 5 Building the Display Shelf Assembly Part s List 3 Assembly Scr een Supports No pa rt num ber 2 1 These brackets migh t also be located inside of the assem bly cabi net. These br ackets are only requir ed if you u se a T ype 1 projec tor sc reen , part num ber 800-2 8681-x x.
5-3 Cisco TelePre sence System 3000 OL-14521-01 Chapter 5 Buildin g the Dis play She lf Asse mbly Determining the Display Shelf Type Cautio n The she lf segment s are unstab le during asse mbly . Use cauti on, and suppor t all stru ctures a s require d.
5-4 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 5 Building the Display Shelf Assembly Determining t he Displ ay Shelf Type – Display shelv es with a product ID of CTS3K-M- T ABLE-G2 use draw bolts to attach the sections. Figure 5-1 sh ows the att achm ent ha rdwar e di fference s.
5-5 Cisco TelePre sence System 3000 OL-14521-01 Chapter 5 Buildin g the Dis play She lf Asse mbly Building the Disp lay Shelf Assembly, Pr oduct I D CTS3K-FUR -MAPLE Building the Displa y Shelf Assembl y, Product ID CTS3K-FUR- MAPLE Step 1 Attach the Display shelf hardw are to the display sh elves .
5-6 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 5 Building the Display Shelf Assembly Building the Display Shelf Assembly, Prod uct ID CTS3K-FUR-MA PLE Step 2 Attach the l eft Di splay s helf.
5-7 Cisco TelePre sence System 3000 OL-14521-01 Chapter 5 Buildin g the Dis play She lf Asse mbly Building the Disp lay Shelf Assembly, Pr oduct I D CTS3K-FUR -MAPLE Step 3 Attach the center Dis play .
5-8 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 5 Building the Display Shelf Assembly Building the Display Shelf Assembly, Prod uct ID CTS3K-FUR-MA PLE Step 4 Attach the r ight Di splay shelf. Figur e 5-5 Right Displa y shelf Note Refer to Figure 5-2 to see the hardwar e used to attach the righ t Display shelf to the cente r Display shelf.
5-9 Cisco TelePre sence System 3000 OL-14521-01 Chapter 5 Buildin g the Dis play She lf Asse mbly Building the Disp lay Shelf Assembly, Pr oduct I D CTS3K-FUR -MAPLE Step 5 Attach the screen sup ports.
5-10 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 5 Building the Display Shelf Assembly Building the Disp lay Shelf Asse mbly, Product ID CTS3K-M-TA BLE-G2 Building the Displa y Shelf Assembl y, Product ID CTS3K-M-TABLE-G 2 Step 1 Attach the Display shelf hardw are to the display sh elves .
5-11 Cisco TelePre sence System 3000 OL-14521-01 Chapter 5 Buildin g the Dis play She lf Asse mbly Building the Display Shelf Assembly, Product ID CTS3K-M-TABLE-G2 Step 2 Attach the l eft Di splay s helf.
5-12 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 5 Building the Display Shelf Assembly Building the Disp lay Shelf Asse mbly, Product ID CTS3K-M-TA BLE-G2 Step 3 Attach the center Dis play sh.
5-13 Cisco TelePre sence System 3000 OL-14521-01 Chapter 5 Buildin g the Dis play She lf Asse mbly Building the Display Shelf Assembly, Product ID CTS3K-M-TABLE-G2 Step 4 Attach the r ight Di splay shelf.
5-14 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 5 Building the Display Shelf Assembly Building the Disp lay Shelf Asse mbly, Product ID CTS3K-M-TA BLE-G2 Step 5 Attach the screen supp orts t.
CH A P T E R 6-1 Cisco TelePre sence System 3000 OL-14521-01 6 Building the Table Assembly Revised: October 29, 2009, OL- 14521-01 Parts List Key Part Description Part Number Qty Ctn Notes T able Asse.
6-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Parts Li st Accessory Cab inet 1 Left acce ssory ca binet 700-236 01-xx 1 42, 43 2 M8 x 30 mm s crews 6 9-1706 -x.
6-3 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Parts List Cautio n The tab le segments are unstabl e during asse mbly . Use caution, and suppor t all struct ures as require d. Cautio n Some system component s hav e m etal and plastic ed ges with hard angl es.
6-4 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Determining t he Table Sect ion Type Cautio n T ab le eleme nts are he avy , an d metal edg es can be very shar p. Prot ect your hands and eyes from inj ury by wearing safety glov es and glasses.
6-5 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building t he Table Assembly, Prod uct ID CTS3 K-FUR-MAPLE Building the Tab le Assembly, Product ID CTS3K-FUR-MAPLE Step 1 Remo ve the Meta l packaging b races f rom the Molded f oam b umpers.
6-6 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Table A ssembly, Product ID CTS3K- FUR-MAPL E Step 2 Asse mble the fou r Molded foam bu mpers and the four T able leg bases. Note The leg base with only one top ri ght attachment bracket is the left-win g leg (see Figure 6-10 ).
6-7 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building t he Table Assembly, Prod uct ID CTS3 K-FUR-MAPLE Step 3 Attach the Right -wing tablet op sec tion to the r ight Accessory Cabine t bracket .
6-8 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Table A ssembly, Product ID CTS3K- FUR-MAPL E Step 4 Attach the r ight T able se gment. a. Cam Lock rods have two adjustable halves that scr ew into a center pi ece.
6-9 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building t he Table Assembly, Prod uct ID CTS3 K-FUR-MAPLE Step 5 Attach the r ight-m ost T able L eg.
6-10 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Table A ssembly, Product ID CTS3K- FUR-MAPL E Step 6 Attach the c enter T able se gment . a. Cam Lock rods have two adjustable halves that scr ew into a center pi ece.
6-11 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building t he Table Assembly, Prod uct ID CTS3 K-FUR-MAPLE Step 7 Attach the Right- center T able leg.
6-12 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Table A ssembly, Product ID CTS3K- FUR-MAPL E Step 8 Attach the l eft T able se gment. a. Cam Lock rods have two adjustable halves that scr ew into a center pi ece.
6-13 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building t he Table Assembly, Prod uct ID CTS3 K-FUR-MAPLE Step 9 Attach the l eft c enter T able l eg .
6-14 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Table A ssembly, Product ID CTS3K- FUR-MAPL E Step 10 Att ac h the left -m os t T ab le leg . Note The left-most T able leg is dif ferent from the other three table le gs.
6-15 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building t he Table Assembly, Prod uct ID CTS3 K-FUR-MAPLE Step 11 Attach the tab le door .
6-16 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Table A ssembly, Product ID CTS3K- FUR-MAPL E Step 12 Using scissors, complete ly remov e one of th.
6-17 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building t he Table Assembly, Prod uct ID CTS3 K-FUR-MAPLE Step 13 Attach the Acces sory cabin ets to the left and rig ht attachmen t brac kets and cov er the visib le scre w holes in the cabinet body with th e cabinet hole cov er .
6-18 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Tabl e Assemb ly, Product ID CT S3K-M-T ABLE-G2 Building the Tab le Assembly, Product ID CTS3K-M-TABLE-G2 Step 1 Remo ve the Meta l packaging b races f rom the Molded f oam b umpers.
6-19 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building the Table Assembly, Product ID CTS3K-M-TAB LE-G2 Step 2 Asse mble the fou r Molded foam bu mpers and the four T able leg bases. Note The leg base with only one to p right attachment bracket is the left most tab le leg (se e Figure 6-25 ) .
6-20 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Tabl e Assemb ly, Product ID CT S3K-M-T ABLE-G2 Step 3 Assemble the I/O modules for the outside left and outside right molded foam bu mpers. The outsi de left an d outside right molde d foam bumpers only have one I/O mod ule eac h.
6-21 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building the Table Assembly, Product ID CTS3K-M-TAB LE-G2 Step 4 Assemble the I/O modules for the inner molded foam bumpe rs. Note St eps f or rou tin g th e Ethe rnet an d power ca bles are in Cha pter 8, “Routing Po wer and Sig nal Cable s.
6-22 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Tabl e Assemb ly, Product ID CT S3K-M-T ABLE-G2 Step 5 Attach the ri ght wing ta bletop sec tion to th e right Acc essory Cabin et bracket.
6-23 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building the Table Assembly, Product ID CTS3K-M-TAB LE-G2 Step 6 Attach the r ight T able se gment. a. Make sur e you tighte n the draw b olt evenly on b oth sides .
6-24 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Tabl e Assemb ly, Product ID CT S3K-M-T ABLE-G2 Step 7 Attach the r ight m ost T able Le g.
6-25 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building the Table Assembly, Product ID CTS3K-M-TAB LE-G2 Step 8 Attach the c enter T able se gment . a. Make sur e you tighte n the draw b olt evenly on b oth sides .
6-26 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Tabl e Assemb ly, Product ID CT S3K-M-T ABLE-G2 Step 9 Attach the r ight c enter T able l eg .
6-27 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building the Table Assembly, Product ID CTS3K-M-TAB LE-G2 Step 10 Attach th e lef t T able s eg ment. a. The dra w bolt s ha ve tw o halv es that scr e w into a center p iece.
6-28 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Tabl e Assemb ly, Product ID CT S3K-M-T ABLE-G2 Step 11 Attach th e lef t cent er T able le g.
6-29 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building the Table Assembly, Product ID CTS3K-M-TAB LE-G2 Step 12 Attach th e left most T able le g.
6-30 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Tabl e Assemb ly, Product ID CT S3K-M-T ABLE-G2 Step 13 Attac h the Microp hones t o the left , right, and c enter T able segme nts.
6-31 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building the Table Assembly, Product ID CTS3K-M-TAB LE-G2 Step 14 Attach t he table door to the ta bletop sections and at tach the “pleas e close ” label to the un dersid e of the table door .
6-32 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Tabl e Assemb ly, Product ID CT S3K-M-T ABLE-G2 Step 15 Attach the Acces sory cabin ets to the left and rig ht attachmen t brac kets and cov er the visib le scre w holes in the cabinet body with th e cabinet hole cov er .
CH A P T E R 7-1 Cisco TelePre sence System 3000 OL-14521-01 7 Assembling the Remai ning Cisco TelePresence Elements Revised: March 5, 201 0, OL-14521-01 Parts List Key Part Description Part Number Qt.
7-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Ether net an d Pow er I/O Conn ecti ons 1 I/O bla nk: large 700-23806- xx 2 1 2 I/O bla nk: smal l 700-23807- xx 6 1 3 I/O modu les: power/Ether net 74-xxxx-x x 6 1 Part num ber chan ges per c ountry or regi on.
7-3 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List 2 Priv a cy panel: center 700-23334- xx 1 34 (CTS3K-F U R-MAPLE) 31 (CTS3K-M - T ABLE-G2) Product s sh ipped to Chin a use a di ff erent priv a cy panel.
7-4 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st 3 Speaker bo ard center 700-23603- xx (CTS3K-F UR- MAPL E) 69-1836-0 1.
7-5 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List Note Note that th e ke y numbers r estart for e ach elem ent. War ni n g Only trained and qualified personnel s hould be allowed to install , replace, or service this equipment.
7-6 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Step 1 Place the ass embly o ver the cent er display , then atta ch the Camera As sembly to th e Camera Assembly bracket .
7-7 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List Step 2 Assemble the I/O Modul es for the outside left and outsi de right Molded F oam bu mpers. The outsi de left an d outside right Mold ed Foam bumpers on ly have one I/O Module ea ch.
7-8 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Step 3 Assemble the I/O Modul es for the two inner Molded Foam b umpers. The outsi de left an d outside right Mold ed Foam bumpers on ly have one I/O Module ea ch (see Figure 7-2 ).
7-9 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List Step 4 Attach th e Projector to the Proje ctor mounting brac ket.
7-10 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Step 5 Attac h the Projecto r bra cket to t he under side of the cente r T a ble segm ent. Note • The brack et slides betwe en two ro ws of screws.
7-11 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List Step 6 Attach th e VGA mod ule to the center T able segme nt. The VGA mod ule suppor ts the VGA peripher al cabl e when not in use.
7-12 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Step 7 Attach the cen ter Pri vac y panel.
7-13 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List Step 8 Attach the lef t Pri vac y panel.
7-14 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Step 9 Attach the ri ght Priv acy panel.
7-15 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List Step 10 Attach t he ri ght-win g Priv acy pane l.
7-16 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Step 11 Attach th e Cable man agement ba rs to the three Codecs.
7-17 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List Step 12 Attach th e Codec attach ment brackets to the three Cod ecs.
7-18 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Step 13 Attach the three Codecs to the Display structure Front foot stabilizer s.
7-19 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List Step 14 Attach the au dio/vi deo extension uni t to its bracket.
7-20 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Step 15 Attac h the audio/ video extension unit to th e rear of the di splay asse mbly .
7-21 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List Step 16 Attac h the Speaker board fe et to the Spea ker boar ds. The fe et shou ld ang le towar ds th e rear of the D ispl ay st ructu re .
7-22 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Step 17 Attach th e Speake r board s to the Speake r board brack ets on the unde rside of the Display shel ves.
7-23 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List Step 18 Attach th e Speakers to the Speak er boards.
7-24 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Step 19 Attach th e Projector screen to the front of the system . Note Ple ase r efer to your C isco T elePresence Project or Screen Ass embly manual for th e e xact proc edures used to b uild the project or screen.
7-25 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List Step 20 Attach the auxili ary con trol unit to its b racket using 5 mm scr ew s; then, attach th e unit and brack et to the r ear of the d isplay as sembly .
7-26 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Step 21 Assemble the Lar ge Camera T arget. When yo u slide the C amera ta rge t into the fr ame, ma ke sure the t arg et is center ed in th e frame betw een the ver tical lines at the top and botto m of the targ et.
CH A P T E R 8-1 Cisco TelePre sence System 3000 OL-14521-01 8 Routing Power and Signal Cables Revised: December 8, 201 1, OL-14521-01 Parts List Cautio n Do not power on the PDUs an d auxi liary cont rol uni t until you conn ect and ro ute all th e cable s.
8-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3000 Cautio n Use ca re whe n you r oute t he power ca bles fr om th e PDUs.
8-3 Cisco TelePre sence System 3000 OL-14521-01 Chapter 8 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3000 Figur e 8-1 PDU instal lation t o lef t accessory cabine t Step 2 Attach the rig ht PDU to the right Ac cessor y cabin et and con nect th e po wer cord for the PDU in to the power outlet.
8-4 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3000 Figur e 8-2 Right-side P DU insta llation t o r ight accessory ca binet Step 3 Attach t he ce nter PDU to the c enter pri vac y panel and connect the po wer cord for the PDU int o the p o wer outlet.
8-5 Cisco TelePre sence System 3000 OL-14521-01 Chapter 8 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3000 Figur e 8-3 T able assembl y PDU at tachmen t t o the c ent er Pr iv acy panel Note Th e PDU power cable shoul d extend from the ri ght side.
8-6 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3000 Step 4 Route th e power cables for the tabl e leg foam bumpe r I/O module s and the projec tor .
8-7 Cisco TelePre sence System 3000 OL-14521-01 Chapter 8 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3000 Step 5 Rout e the signal cab les from the tab le assemb ly .
8-8 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3000 Figur e 8-6 Routing the Codec P ow e r Cables Step 7 Connect th e Cisco Unified IP Phon e, VGA periphe ral, and proj ecto r HD video cabl es.
8-9 Cisco TelePre sence System 3000 OL-14521-01 Chapter 8 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3000 Figur e 8-7 Cabling the C isco Unifi ed IP Pho ne, D VI.
8-10 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3000 c. Immedi ately c onnect the mi crophone to the codec o r audio/ video extension unit using the d iagra m in Figu re 8-8 .
8-11 Cisco TelePre sence System 3000 OL-14521-01 Chapter 8 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3000 Step 9 Connect th e speaker ca bles usin g the following markings and co lors on the codec: • A single dot on a gre en backg round indi cates a ce nter speaker .
8-12 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3000 Figur e 8-9 Cabling the Speak ers Ti p Befo re plu gging cabl es int o the C odec, l abel each o ne. F or exam ple, L eft Sp eaker , Center Speak er .
8-13 Cisco TelePre sence System 3000 OL-14521-01 Chapter 8 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3000 Figur e 8-1 0 Cabling the L ighting Asse mbly P ow er .
8-14 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3000 Step 11 Attach an d route th e po wer and signal cab les for the plasma disp lays. Note Connect the c enter plasma display to “UNSWITCHED ” outlet of the the auxil iary con trol unit.
8-15 Cisco TelePre sence System 3000 OL-14521-01 Chapter 8 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3000 Step 12 Con nect th e ca mer a ass embl y cabl es.
8-16 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3000 Step 13 Attach th e ferrite co res to the en ds of all six cam era cables ( both the video and Ether net cable s, 12 fe rrite cores total).
8-17 Cisco TelePre sence System 3000 OL-14521-01 Chapter 8 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3000 Figur e 8-14 Connecting the Codec Signal Ca bles Note Figur e 8-14 displ ays the re ar view of the Cisco T ele Presenc e System 300 0.
8-18 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3000 Cable routing f or the auxiliary co ntrol unit and pr ojector for a stan dard CTS 3 000 installati on is shown in Figu re 8-15 .
8-19 Cisco TelePre sence System 3000 OL-14521-01 Chapter 8 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3000 Cable routing fo r a standard CTS-3000 in stallation that use s a presentation co dec is sho wn in Figure 8-1 6 .
8-20 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3000 Note Because you n eed to split the video signal b etween t he proje ctor and a ny additiona l video output, you must purchase at least one extra cable t o connect optional ex ternal display (s).
8-21 Cisco TelePre sence System 3000 OL-14521-01 Chapter 8 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3000 Figur e 8-17 Cabling Diag ram : CTS 3000 Installations.
8-22 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3000 Refer to the “Options f or the Cisco T elePres ence.
8-23 Cisco TelePre sence System 3000 OL-14521-01 Chapter 8 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3000 Figur e 8-18 Cabling Diag ram : CTS 3000 Installat ion.
8-24 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3000.
CH A P T E R 9-1 Cisco TelePre sence System 3000 OL-14521-01 9 Firs t-Time Setup Revised: December 8, 201 1, OL-14521-01 After you have assembled t he Cisco T elePrese nce Sy stem (C TS), you set up t.
9-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Loading CTS Admi nistration Software Note M ake sure that you p ower on all codecs withi n 30 second s to avoid power on detectio n failu re. After yo u turn on the co decs, th e displa ys associa ted with each codec bec omes acti ve.
9-3 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Loading CTS Administration Software Figur e 9-2 Sys tem IP A ddr ess Note If the IP add ress tha t displays i s 192.16 8.100. 2, the CTS-3000 c ould no t cont act the DHCP server o r your system does not us e DHCP .
9-4 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Configuring an A lternate TF TP Server (Op tional) Step 4 From the Cisco IP te lephone welco me pag e, pre ss Next . The system r eboots. Note Th e system migh t reboot sev eral times duri ng the initi al start up process.
9-5 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Settin g Up CT S Com ponents Step 2 From T roubleshooting , cho ose Hard war e Se tup to initially se t up the componen ts in the Cisco T elePrese nce system.
9-6 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Setting Up CTS Components Troub leshootin g Disp lays Use Ta b l e 9-1 to tro ubleshoot p roblems with the images on t h e displays .
9-7 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Settin g Up CT S Com ponents Setting Up the Camer as The cam eras are set up co rre ctly when ima ges are cent ered an d in f ocu s on the disp lay s cree ns and the white ba lance has be en conf igured .
9-8 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Setting Up CTS Components Figur e 9-3 Camer a T ar get Assembly Step 2 Attach t he large target t o the unde rside o f th e cent er t able sec tion by placi ng the round pads on the underside of the clam ps into recesses that are drilled und er the table.
9-9 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Settin g Up CT S Com ponents The targe t pat tern s houl d face th e ca mer a. Step 3 In the Cisc o T elePre sence administ rative GUI, navigate to Hardwar e Setup > T roubleshooting > Cameras .
9-10 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Setting Up CTS Components Figur e 9-4 Camer a Adjust ment Scr ews Figur e 9-5 Cor rect Camer a T ar get Alignmen t—Cent.
9-11 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Settin g Up CT S Com ponents d. Place the small tar get on the table in fr ont of the lar ge target, and adjust th e focus b y completin g the steps in the “Foc using the Cam era” sect ion on page 9-13 .
9-12 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Setting Up CTS Components i. Make manual ad justmen ts to the ca mera foc used on the tar get and th e zoom rin g on the camer a to make t he follo wing adjustments to t h e camera: • Align the red plus sign to the plus sign in the middle of th e target.
9-13 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Settin g Up CT S Com ponents Focusing the Camera T o focus the cameras using the lar ge and small targets, complete the follo wing steps: Step 1 Place the s mall tar get on center of t he table, in front of the center camera .
9-14 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Setting Up CTS Components Step 5 Adjust the focus on the camera b y perform ing the follo wing step s: a. Loosen th e thum bscrew for the len s focus ring. The rin g is labele d “N-8 ”.
9-15 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Settin g Up CT S Com ponents Cautio n Do not ov ertighten the scre ws, or use a po wer scre wdriv er to tighte n the scre ws. The recommen ded torque for the screws is 0.8N .m (7 inc h-poun ds).
9-16 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Setting Up CTS Components Troub lesho otin g Came ras Use Ta b l e 9-2 to troublesh oot prob lems with camer as.
9-17 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Settin g Up CT S Com ponents Setting Up the Sp eakers The speake rs are set up co rrect ly you can hear sound clea rly from ea ch one . Y ou can cho ose whet her you want to cycle thr ough the spe akers aut omatic ally or manual ly .
9-18 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Setting Up CTS Components Step 4 Calibra te the micro phones by clic king the Micr ophone Calibration but t o n . Note Th e room must be comp lete ly quiet to proper ly cal ibrate microph ones a nd ensure tha t cam era swit ching is prop erly ena bled.
9-19 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Settin g Up CT S Com ponents Setting Up the Projector This se ction contai ns the steps t hat y ou pe rform t o set up the p.
9-20 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Setting Up CTS Components Note Changing these set tings allo ws a projecto r to be monitored b y SNMP when the projector is in an i nacti ve state.
9-21 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Settin g Up CT S Com ponents • Click the VGA radio b utton to test i nput from a V GA de v ice • Click the Do cume nt ca.
9-22 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Setting Up CTS Components Step 3 Set the display to display right- side up b y completi ng the f ollo wing steps: a. Press the MENU key on the remot e contr ol. Note The menu screen will appear upside do wn and re versed.
9-23 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Settin g Up CT S Com ponents d. Press the Right Ar row key an d se lec t Normal . e. Press th e Left Arrow key to confirm your se lecti on. Step 9 Eliminate o verscan by completing th e follo wing steps: a.
9-24 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Setting Up CTS Components Step 12 Select the screen size by c ompletin g the f ollo wing steps : a. From th e ma in me nu, us e th e Up Arro w and Do wn Arrow ke ys to highligh t the Scr een fu nct ion.
9-25 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Settin g Up CT S Com ponents If the input im age is displ aying correc tly , you shoul d see an image projec ted on the projec tion su rface.
9-26 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Setting Up CTS Components Note Th e Cisco T elePresence System can displa y information from mul tiple input de vices dur.
CH A P T E R 10-1 Cisco TelePre sence System 3000 OL-14521-01 10 Use & C are Guide Revised: October 31, 2008, OL- 14521-01 Maintaining the Tabletop Cautio n W axin g or rubbi ng the surface with a ny type of abr asiv e is not re commen ded. • F or genera l daily ca re - use a damp ened cloth with clean w ater .
10-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Ch apter 1 0 U se & Car e Gui de Main tain ing the P roj ecto r Maintaining th e Projector Note Refer to the Pro jector User Guid e inclu ded wi th you r proje ctor f or mainte nanc e iss ues such as cl eaning the pro jector len s.
CH A P T E R 11-1 Cisco TelePre sence System 3000 OL-14521-01 11 Field-Replaceable Unit Guid e Revised: October 29, 2009, OL- 14521-01 This chap ter de scribe s the steps you perfo rm to rep lace the .
11-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Complete List of Spares fo r the Cisco Te lePresenc e Syste m 3000 T able 1 1 -1 L ist of FIe ld-Replacea ble.
11-3 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Complete List of Spa res for th e Cisco TelePr esence Syste m 3000 CTS-DI SP-BKT -1K 3K Display bra cket for .
11-4 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing the Camera Cl uster—Part Numbe r CTS3K-CAM-CLST-G 2= Replacing the Ca mera Cluster—Part Numb er.
11-5 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Repla cin g the Cam era C luste r—Par t Numbe r CTS3 K-CA M-CL ST-G2 = Note Th e direc tions left and right re fer to the asse mbly as you fac e it. Step 1 Remove the top ca mera hood by r emoving t he screws th at sec ure it to t he bra cket.
11-6 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing a Plasma D isplay—Part Number CTS-DISP-65-GEN4 = Replacing a Plasma Displa y—Part Number CTS-DI.
11-7 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Replac ing a Plasma Displa y—Pa rt Numb er CTS- DISP -65-G EN4= Powering Off the System Po wer of f the sys.
11-8 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing a Plasma D isplay—Part Number CTS-DISP-65-GEN4 = Removin g the Left Ta bletop Do or Section The l eft tab letop doo r sec tion must be re moved to al low room to m ove the Plasma displays in and out of the wor k area .
11-9 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Replac ing a Plasma Displa y—Pa rt Numb er CTS- DISP -65-G EN4= See Chapter 8 , “Routing Power and Signal Cab les” , for cable lo catio ns and re fere nce.
11-10 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing a Plasma D isplay—Part Number CTS-DISP-65-GEN4 = Figur e 1 1 -2 Attac hing the Displa y Mountin g Bra ck et Step 10 T urn the powe r switch on the Plasma display to the On positio n.
11-11 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Replac ing a Plasma Displa y—Pa rt Numb er CTS- DISP -65-G EN4= Figur e 1 1 -3 P o wer a nd Signa l Connec.
11-12 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing a Plasma D isplay—Part Number CTS-DISP-65-GEN4 = Figur e 1 1 -4 P o wer and Signa l Connections fo r Displa ys with D VI Connectors Step 12 Hang th e replacemen t Plasma disp lay .
11-13 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Replac ing a Plasma Displa y—Pa rt Numb er CTS- DISP -65-G EN4= Step 18 Hang th e speak er boar ds. See Chapter 7, “ Assembling the Remain ing Cisco T elePresence Elements” for more informa tion.
11-14 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing a Speake r—Part Number CTS- LDSPKR= Replacing a Spe aker—Par t Number CTS-LDSPKR= Required Inf.
11-15 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Repla cing a S peaker —Part N umber CTS-LDSP KR= c. After yo u ha ve cr eated a g ap of appro ximatel y 1/.
11-16 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Repl acing a Codec U nit—Part N umber CT S-CODEC-PRI -G2= (Pr imary Codec) or CTS-CODEC-SE C= (Sec ondary .
11-17 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Repl aci ng a Co dec U nit—P art Numbe r CT S-COD EC-PRI -G2 = (Prima ry Co dec ) or CT S-CODE C-SE C= (Se conda ry See Chapter 7, “ Assembling the Remain ing Cisco T elePresence Elements” f or addi tional inf ormation.
11-18 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing a Micr ophone—Pa rt Numbe r CTS-MIC= Replacing a Micro phone—Part Number CTS-MIC= Required Inf.
11-19 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Replaci ng a Mic ropho ne—Part Num ber CTS -MIC= Step 3 Check th e cable on the mic rophon e to be repla ced an d comple te one of th e following procedure s to comp lete t he m icropho ne r eplac emen t.
11-20 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing a Micr ophone—Pa rt Numbe r CTS-MIC= Step 13 Select Hardware Setup to verify the cam eras, displ ays, spe akers, and mi crophon es are wor king properly .
11-21 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Replacin g a Light Fix ture—P art Number CTS- LIGHT-FIX T= Step 13 Select Hardware Setup to verify th e camer as, displ ays, speake rs, and microp hones ar e working properly .
11-22 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing the Audi o/Video Ex tension Unit— Part Num ber CTS-AV-EXP= Replacing a Light Fi xture Step 1 Po wer of f the lights by tu rning the po wer switch to the Of f position to the po wer unit that contr ols your lights.
11-23 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Replacing the Cisco IP Phone—P art Numbe r CP-7975G-C TS= Cautio n Make sure all system po wer is turned o ff before b egi nning this disa ssembly . Step 2 Remove the cables from the audio/ video extension u nit.
11-24 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing the Pro jector Lam p—Part Number CTS-PR JTR-BL-GEN1 = or CTS-PRJTR -GEN2-CH (Ch ina) Replacing t.
11-25 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Repl acin g the Proje ctor— Par t Num ber CTS-PRJ TR- GEN1 = Note Y o u may need to rock th e unit back ward and forward to unse at it. Step 9 Install th e repla cement lam p module and s ecure th e module and cov er with th e scre ws.
11-26 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing a PDU—Part N umber CTS-PWR-PDU= Step 9 Reattach the assem bly to the underside of the tabletop. Step 10 Reattac h the VGA cable to the pr oject or .
11-27 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Replacing the Auxiliary Control Unit—Part Number CTS-LIGHT-CTRL= Replacing the Auxili ary Control Unit—Part Numbe r CTS-LIGHT-CTRL= The auxiliary co ntrol unit is located in the center of the display assembl y .
11-28 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing a Displ ay Shelf Replacing a Di splay Shelf The display shelv es are the table sec tions that sit directly belo w the display scree ns.
11-29 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Rep laci ng a Dis play She lf Step 7 From the u nderside of th e display structure, rem ov e all t he scre ws that a ttach the d isplay she lves to t he display assembly .
11-30 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing a Ta ble Top Sect ion Replacing a Table Top Section Complet e the se st eps to r eplace a tab le top sectio n.
11-31 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Replac ing a Tab le Top S ection Step 8 Remove the draw bolts or cam locks betw een the tab le top sec tions on the side that you moved. See Chapter 6, “Buildin g the T able Assembly” fo r the l ocation of the dr aw b olts or c am locks.
11-32 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing a Ta ble Top Sect ion.
A- 1 Cisco T elePresen ce System 3000 OL-14521-01 APPENDIX A Parts List Sorted by Carton Revised: February 1, 201 0, OL-14521- 01 Overview • Each carto n may contain multiple parts. Some of these part s are grouped together in kits. Each kit is a smaller box contained within the ‘master’ car ton.
A- 2 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix A Parts Li st Sorted by Carto n Carton 1 of 44: Mechanica l Access ory Kit, CTS3K -ACC-KIT , 53-2855-xx 78-1 7839- 05B0 Regula tory Complianc.
A-3 Cisco T elePresen ce System 3000 OL-14521-01 Appendix A Parts List Sorted by Carton Carton 2 of 44: Camera Assembly, 800-28487-x x, CTS3K-CAM-CLUS T Carton 2 of 44: Camera Assembly, 800-28487-xx, .
A- 4 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix A Parts Li st Sorted by Carto n Carton 4 of 44: Secondar y Codec, 800 -28202 -xx, CTS-CO DEC-SEC Carton 4 of 44: Secondary Cod ec, 800-28202-.
A-5 Cisco T elePresen ce System 3000 OL-14521-01 Appendix A Parts List Sorted by Carton Carton 9 of 44: Speake r, 74-4740-x x, CTS-LDSPKR Carton 9 of 44: Speaker, 74-4740-xx, CT S-LDSPKR Carton 10 of .
A- 6 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix A Parts Li st Sorted by Carto n Carton 13 of 44: Privacy Panel, Right, 69-1628-xx, CTS3K-ST RUCTURE Carton 13 of 44: Privacy Panel, Right, 69.
A-7 Cisco T elePresen ce System 3000 OL-14521-01 Appendix A Parts List Sorted by Carton Carton 17 of 44: Displa y Structur e Rear Feet , 69-1625-xx, CTS3K-STRU CTURE Carton 17 of 44: Display Structure.
A- 8 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix A Parts Li st Sorted by Carto n Cart on 22 of 44: Plasma D isplay , 74 -4881- xx, CTS-D ISP- 65-G EN2 Carton 22 of 44: Plasma Displa y, 74-48.
A-9 Cisco T elePresen ce System 3000 OL-14521-01 Appendix A Parts List Sorted by Carton Carton 26 of 44: Lighting Assem bly, 69-1612-xx, C TS3K-LIGHT-STR Carton 26 of 44: Lighting Assembly, 69-1612-xx.
A-10 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix A Parts Li st Sorted by Carto n Cart on 28 of 44: Light Fi xture , 74- 5361- xx, CT S-LI GHT-FI XT Carton 28 of 44: Light Fixture, 74-5361-xx.
A-11 Cisco T elePresen ce System 3000 OL-14521-01 Appendix A Parts List Sorted by Carton Carton 33 of 44: Display Struct ure Crossbars , 69-1623-xx, CTS3K-STRUCTURE Carton 33 of 44: Display Structure .
A-12 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix A Parts Li st Sorted by Carto n Carton 37 of 44: Display Structure, 69-1622-xx, CTS3 K-STRUCTURE Carton 37 of 44: Display Structure, 69-1622-.
A-13 Cisco T elePresen ce System 3000 OL-14521-01 Appendix A Parts List Sorted by Carton Carton 41 of 44: Ta bletop Le g Base, 69-1620-xx, CTS3K-STRU CTURE Carton 41 of 44: Tabletop Leg Base, 69-1620-.
A-14 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix A Parts Li st Sorted by Carto n Carton 44 of 44 : Tabletops . Display Shel ves, and Speaker Boa rds, 69-16 38-xx, CTS3K- FUR-M APLE 69-1640 -.
B-1 Cisco T elePresen ce System 3000 OL-14521-01 APPENDIX B Cisco TelePresence System 3000 Pallet Dimensions and Description Revised: October 29, 2009, OL- 14521-01 The follo wing chapter prov ides you with the dimensions of t he pallets for the Cisco T el ePr esen ce System 3000.
B-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix B Cisco TelePresen ce System 3000 Palle t Dimensions and Desc ription The follo wing table provides you with the descr iption of the pallets for the Cisco T e le Pre sen ce System 3000.
C-1 Cisco T elePresen ce System 3000 OL-14521-01 APPENDIX C Region- and Country -Specific Equipment Revised: December 8, 201 1, OL-14521-01 The fol lo wing countrie s and re gions ha ve equipment manufactu red to l ocal re gulations. Note Th ese photo s are provided a s a referen ce for the plug type .
C-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix C Reg ion- and Country-Specific Equipment Argentina Argentina Part Description Part Number Qty Photo T e lePresence Po wer Cord PWR-CORD10-AR .
C-3 Cisco T elePresen ce System 3000 OL-14521-01 Append ix C Region- and Country -Specific Equ ipment Australia Australia Part Description Part Number Qty Photo T e lePresence Power Cord PWR-CORD10-A .
C-4 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix C Reg ion- and Country-Specific Equipment Cen tra l Eu ro pe Central Europe Part Description Part Number Qty Photo T e lePresence Po wer Cord .
C-5 Cisco T elePresen ce System 3000 OL-14521-01 Append ix C Region- and Country -Specific Equ ipment China China Par t Des cripti on Part N umber Qt y Pho to T e lePresence Power Cord PWR-CORD10- CN 37-0837- 01 2 I/O module s: power/Ethernet CTS-LAPC ONN-CN 74-4914- 01 6 Projector 74- 6687-01 Kit No.
C-6 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix C Reg ion- and Country-Specific Equipment India, UAE, South Africa India, UAE, South Afri ca Part Description Part Number Qty Photo T e lePres.
C-7 Cisco T elePresen ce System 3000 OL-14521-01 Append ix C Region- and Country -Specific Equ ipment Israel Israel Part Description Part Number Qty Photo T e lePresence Power Cord PWR-CORD10- ISR 37-.
C-8 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix C Reg ion- and Country-Specific Equipment Ital y Italy Part Description Part Number Qty Photo T e lePresence Po wer Cord PWR-CORD10-IT A 37-08.
C-9 Cisco T elePresen ce System 3000 OL-14521-01 Append ix C Region- and Country -Specific Equ ipment Japan Japan Part Description Part Number Qty Photo T e lePresence Po wer Cord PWR-CORD10-JP 37-084.
C-10 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix C Reg ion- and Country-Specific Equipment North Ameri ca North America Part Description Part Number Qty Photo T e lePresence Po wer Cord PWR-.
C-11 Cisco T elePresen ce System 3000 OL-14521-01 Append ix C Region- and Country -Specific Equ ipment Switzerland Switze rland Part Description Part Number Qty Photo T e lePresence Po wer Cord PWR-CO.
C-12 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix C Reg ion- and Country-Specific Equipment Unit ed Kingdom United Ki ngdom Part Description Part Number Qty Ph oto T e lePresence Po wer Cord .
デバイスCisco 3000の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Cisco 3000をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCisco 3000の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Cisco 3000の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Cisco 3000で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Cisco 3000を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCisco 3000の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Cisco 3000に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCisco 3000デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
