CiscoメーカーDFC3Bの使用説明書/サービス説明書
ページ先へ移動 of 46
Americas Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules Installation Note This publicatio n describes the procedur es for instal ling and removing the Distrib uted F orwarding Card 3 (DFC3) daughter card on t he WS-X67xx Ethernet modules.
2 Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules In stallation Note 78-15893-08 Overview • Installing the DFC3B and DFC3C D aughter Cards, page 23 • Removing and Installin.
3 Catalyst 6500 Series Distribu ted Forwarding Card 3 for WS-X 67xx Modules Installation Note 78-15893-08 Safety Overview Statement 1071—Warning Definition War ni n g IMPORT ANT SAFETY INSTRUCTIONS This warning symbol means danger . Y ou are in a situation that could cause bodily injury .
4 Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules In stallation Note 78-15893-08 Safety Overview Warnung WICHTIGE SICHERHEITSHINWEISE Dieses Warnsymbol b edeutet Gefahr . Sie befinden sich in einer Situation, die zu V erletzungen führen kann.
5 Catalyst 6500 Series Distribu ted Forwarding Card 3 for WS-X 67xx Modules Installation Note 78-15893-08 Safety Overview Va r n i n g ! VIKTIGA SÄKERHETSANVISNINGAR Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada.
6 Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules In stallation Note 78-15893-08 Safety Overview Avis o INSTRUÇÕES IMPORT ANTES DE SEGURANÇA Este símbolo de aviso significa perigo. V ocê se encontra em uma situação em que há risco de le sões corporais.
7 Catalyst 6500 Series Distribu ted Forwarding Card 3 for WS-X 67xx Modules Installation Note 78-15893-08 Safety Overview.
8 Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules In stallation Note 78-15893-08 Required Too ls and Parts War ni ng Only trained and qualified pe rsonnel should be allowed to install, replace, or service this equipment.
9 Catalyst 6500 Series Distribu ted Forwarding Card 3 for WS-X 67xx Modules Installation Note 78-15893-08 Removing a CFC or DFC Daughter Card Note The MEM-XCEF720-1GB memo ry upgrade is requi red for the DFC3BXL upg rade only and i s included as part of the DFC3BXL daug hter card kit only .
10 Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules In stallation Note 78-15893-08 Removing a CFC or DFC Daughter Card Figur e 1 CFC D aught er Car d Installation Hardw are Step.
11 Catalyst 6500 Series Distribu ted Forwarding Card 3 for WS-X 67xx Modules Installation Note 78-15893-08 Removing a CFC or DFC Daughter Card Figur e 2 Unseating the CFC Daught er Card Connect or s Step 6 Gently lift the CFC d aughter card with both hands and remov e the CFC daughter card from the module.
12 Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules In stallation Note 78-15893-08 Removing a CFC or DFC Daughter Card Removing the DFC3 Daughter Card from Modules without Stiffener Brackets War ni ng During this procedure, wear grounding wrist straps to avoid ESD damage to the card.
13 Catalyst 6500 Series Distribu ted Forwarding Card 3 for WS-X 67xx Modules Installation Note 78-15893-08 Removing a CFC or DFC Daughter Card Figur e 3 Removing the DFC D aughter Car d Installation H.
14 Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules In stallation Note 78-15893-08 Removing a CFC or DFC Daughter Card Figure 4 P artially Instal ling the Ca p Nut Step 7 W ith your left hand, lift slightly at t he location sho wn in Figure 5 .
15 Catalyst 6500 Series Distribu ted Forwarding Card 3 for WS-X 67xx Modules Installation Note 78-15893-08 Removing a CFC or DFC Daughter Card Figur e 5 Unseat the DFC3 Daught er Card fr om the Module Step 8 Remove the one cap nut. Step 9 Holding the DFC3 daughter card with both hands, gently lift it straight up fro m the module.
16 Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules In stallation Note 78-15893-08 Removing a CFC or DFC Daughter Card Figur e 6 Removin g the DFC3 D aughter Car d fr om the Mod.
17 Catalyst 6500 Series Distribu ted Forwarding Card 3 for WS-X 67xx Modules Installation Note 78-15893-08 Removing a CFC or DFC Daughter Card T o remove a DFC3 daughter card from a WS-X6748-GE -TX Ethernet module that is equi pped with a stiffener brack et, follow these steps: Step 1 Attach an ESD grounding strap t o your wrist and to gro und.
18 Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules In stallation Note 78-15893-08 Removing a CFC or DFC Daughter Card Note The two scre ws securing the DFC3 daughter card that pass through the front st if fener bracket tabs are longer than the remaining DFC i nstallation scre ws.
19 Catalyst 6500 Series Distribu ted Forwarding Card 3 for WS-X 67xx Modules Installation Note 78-15893-08 Upgrading the E thernet Module Memo ry Figure 9 Removing the DFC3 Daught er Card (WS- X67 48-.
20 Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules In stallation Note 78-15893-08 Upgrading the Eth ernet Module M emory Removing the Memory Module War ni ng During this procedure, wear grounding wrist straps to avoid ESD damage to the card.
21 Catalyst 6500 Series Distribu ted Forwarding Card 3 for WS-X 67xx Modules Installation Note 78-15893-08 Upgrading the E thernet Module Memo ry Step 3 Release the two spr ing clips on either side of th e memory module to release it from th e socket.
22 Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules In stallation Note 78-15893-08 Upgrading the Eth ernet Module M emory Figur e 12 Handling a Memory Module Step 5 Immediately place the old memory module in an antistatic bag to protect it fr om ESD damage.
23 Catalyst 6500 Series Distribu ted Forwarding Card 3 for WS-X 67xx Modules Installation Note 78-15893-08 Installing the DFC3B and DFC3C Daughter Cards Figur e 13 Installing the SODIMM Step 6 After the memory module is installed, check t hat both spring clips are fully eng aged.
24 Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules In stallation Note 78-15893-08 Installing the DFC3B and DFC3C Daughter Cards Installing the DFC3B, DFC3BXL, DFC3C, and DFC3CX.
25 Catalyst 6500 Series Distribu ted Forwarding Card 3 for WS-X 67xx Modules Installation Note 78-15893-08 Installing the DFC3B and DFC3C Daughter Cards Figure 15 Male Standoff Locati ons on the WS-X67xx Modules Step 4 Ensure that the connectors on the DFC3 ar e aligned with the connectors o n the module.
26 Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules In stallation Note 78-15893-08 Installing the DFC3B and DFC3C Daughter Cards Figure 1 7 Seating th e P ow er Connect or Caution Use care not to damage the con nectors on the module.
27 Catalyst 6500 Series Distribu ted Forwarding Card 3 for WS-X 67xx Modules Installation Note 78-15893-08 Installing the DFC3B and DFC3C Daughter Cards Figure 18 Seating the DFC3 Da ughter Car d on the Module Step 7 Use a Phillips-head scre wdrive r to install the installation hardware: a.
28 Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules In stallation Note 78-15893-08 Installing the DFC3B and DFC3C Daughter Cards Figur e 19 Installing the Installation Hardw are.
29 Catalyst 6500 Series Distribu ted Forwarding Card 3 for WS-X 67xx Modules Installation Note 78-15893-08 Installing the DFC3B and DFC3C Daughter Cards Step 8 Reinstall the Ethernet module in the chassis.
30 Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules In stallation Note 78-15893-08 Installing the DFC3B and DFC3C Daughter Cards Step 6 Press down on th e edge of the DFC3 daughter card (see Figure 21 ) to seat the DFC3 daughter card po wer connector to the modu le po wer connector .
31 Catalyst 6500 Series Distribu ted Forwarding Card 3 for WS-X 67xx Modules Installation Note 78-15893-08 Installing the DFC3B and DFC3C Daughter Cards Step 7 Position the i nstallation brack et ov er the two standof fs and press do wn only on the top of the brack et to seat the DFC3 daughter card con nectors on the module conn ectors.
32 Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules In stallation Note 78-15893-08 Installing the DFC3B and DFC3C Daughter Cards Caution Do not ov ertighten the installation hard ware because you will damage the board.
33 Catalyst 6500 Series Distribu ted Forwarding Card 3 for WS-X 67xx Modules Installation Note 78-15893-08 Installing the DFC3B and DFC3C Daughter Cards Figur e 24 Installing the DFC3C and DFC3CXL Insta llation Hardw are (WS-X67 48-GE-TX Equipped with a F ront Stif fener Br ack et) Caution Yo u must install all of th e installation hardw are.
34 Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules In stallation Note 78-15893-08 Removing and Insta lling Ethernet Modu les in the Chassis Removing and Installing Ethe rnet Mo.
35 Catalyst 6500 Series Distribu ted Forwarding Card 3 for WS-X 67xx Modules Installation Note 78-15893-08 Removing an d Installing Ethernet Modules in the Chassis Step 5 Depending on the orientatio n of the slots in the chassis (horizontal or v ertical), perform one of the follo wing tw o sets of substeps: Horizontal slots a.
36 Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules In stallation Note 78-15893-08 Removing and Insta lling Ethernet Modu les in the Chassis Step 3 Fully open both ejector le vers on the Ethernet module.
37 Catalyst 6500 Series Distribu ted Forwarding Card 3 for WS-X 67xx Modules Installation Note 78-15893-08 Removing an d Installing Ethernet Modules in the Chassis Figure 25 P o sitioning the Module i.
38 Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules In stallation Note 78-15893-08 Removing and Insta lling Ethernet Modu les in the Chassis Figur e 26 Clear ing the EMI Gask et.
39 Catalyst 6500 Series Distribu ted Forwarding Card 3 for WS-X 67xx Modules Installation Note 78-15893-08 Removing an d Installing Ethernet Modules in the Chassis Vertical slots a.
40 Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules In stallation Note 78-15893-08 Removing and Insta lling Ethernet Modu les in the Chassis Figure 28 P o sitioning the Module i.
41 Catalyst 6500 Series Distribu ted Forwarding Card 3 for WS-X 67xx Modules Installation Note 78-15893-08 Removing an d Installing Ethernet Modules in the Chassis Figur e 29 Clear ing the EMI Gask et.
42 Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules In stallation Note 78-15893-08 Attaching Your ESD Grounding Strap Figur e 30 Ejector Lev er Closur e in a V er tical Slot Cha.
43 Catalyst 6500 Series Distribu ted Forwarding Card 3 for WS-X 67xx Modules Installation Note 78-15893-08 Attaching Your ESD Ground ing Strap Note This system ground is also re ferred to as the network equ ipment b uilding system (NEBS) ground. • If your chassis does not ha ve the system ground a ttached, you must install the system ground lug.
44 Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules In stallation Note 78-15893-08 Attaching Your ESD Grounding Strap Figure 31 Attac hin g the ESD Wr ist Strap Clip to the Syst.
45 Catalyst 6500 Series Distribu ted Forwarding Card 3 for WS-X 67xx Modules Installation Note 78-15893-08 Obtaining Do cumentat ion and Submitting a Service Request Obtaining Documentation and Submit.
46 Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules In stallation Note 78-15893-08 Obtaining Documenta tion and Submitting a Service Request Cisco and the Cisco Logo are trademarks of Ci sco Systems, Inc. and/or its aff iliates in the U.
デバイスCisco DFC3Bの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Cisco DFC3Bをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCisco DFC3Bの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Cisco DFC3Bの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Cisco DFC3Bで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Cisco DFC3Bを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCisco DFC3Bの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Cisco DFC3Bに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCisco DFC3Bデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。