Cisco Systemsメーカー15454の使用説明書/サービス説明書
ページ先へ移動 of 56
CHAPTER 2-1 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 2 Cards Specifications This chapter contains specif ic information about cards for dense wa velength division multiple xing (D WDM) applications in the Cisco ONS 15454.
2-2 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.1 Card Overview • Multiplex er and demultiplex er cards multiplex and demultiplex D WDM optical channels. The cards consist of three main modules: an optical plug-in, a microprocessor , and a DC/DC con verter .
2-3 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.1 Card Overview Band 42.1 (D) 42.1, 42.9 and 43.7, 44.5 1542.14, 1542.94 and 1543.73, 1544.53 Band 46.1 (E) 46.1, 46.9 and 47.7, 48.5 1546.
2-4 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.1 Card Overview • T ransponder (TXP) and muxponder (MXP) cards conv ert the “gray” optical client interface signals into trunk signals that operate in the “colored” D WDM wavelength range.
2-5 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.1 Card Overview T able 2-5 Cisco ONS 15454 D WDM Cards Card Part Number Description Optical Service Channel Cards OSCM 15454-OSCM= The OSCM card has one set of optical ports and one Ethernet port located on the faceplate.
2-6 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.1 Card Overview OPT -BST -E 15454-OPT -BST -E= The OPT -BST -E card is designed to support up to 64 channels at 50 GHz channel spacing. It is a C-band D WDM EDF A with OSC add-and-drop capability .
2-7 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.1 Card Overview AD-1C-xx.x 15454-AD-1C-xx.x= The AD-1C-xx.x card passiv ely adds or drops one of the 32 channels utilized within the 100 GHz-spacing of the D WDM card.
2-8 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.1 Card Overview 32WSS 15454-32WSS= The 32WSS card has se ven sets of ports located on the f aceplate. The card takes up two slots and operates in Slots 1-2, 3-4, 5-6, 12-13, 14-15, or 16-17.
2-9 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.1 Card Overview TXP_MR_10E 15454-10E-L1-xx.x= The 10 Gbps T ransponder-100 GHz-T unable xx.xx-xx.xx (TXP_MR_10E) card has two sets of ports located on the faceplate and can be installed in Slots 1 to 6 and Slots 12 to 17.
2-10 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.1 Card Overview TXPP_MR_2.5G 15454-MRP-L1-xx.
2-11 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.1 Card Overview MXP_2.5G_10E 15454-10ME-xx.x= The 2.5 Gbps-10 Gbps Muxponder-100 GHz-T unable xx.xx-xx.xx (MXP_2.5G_10E) card has nine sets of ports located on the faceplate and can be installed in Slots 1 through 6 and 12 through 17.
2-12 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2 Card Specifications 2.2 Card Specifications Refer to the “Card Reference” chapter in the Cisco ONS 15454 D WDM Reference Manual for a detailed description of each card.
2-13 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.1 Common Control Cards Figur e 2-1 TCC2 Block Diagr am and Faceplat e The TCC2 card terminates up to 32 DCCs. The TCC2 hardware is prepared for up to 84 DCCs, which will be av ailable in a future software release.
2-14 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.1 Common Control Cards The TCC2 performs all system-timing functions for each ONS 15454. The TCC2 monitors the recov ered clocks from each traf f ic card and two building integrated timing supply (BITS) ports for frequenc y accuracy .
2-15 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.1 Common Control Cards Figur e 2-2 TCC2P Block Diagr am and Faceplat e The TCC2P card supports multichannel, high-lev el data link control (HDLC) processing for the DCC.
2-16 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.1 Common Control Cards The node database, IP address, and system software are stored in TCC2P card non volatile memory , which allo ws quick recov ery in the event of a po wer or card failure.
2-17 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.1 Common Control Cards Figur e 2-3 MS-ISC-1 00T Faceplat e and Block Diagram The MS-ISC-100T separates internal and external traf f ic using a VLAN.
2-18 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.2 Optical Service Channel Cards • PR O T : Connected to the other MS-ISC-100T ports The TCC is connected to the MS LAN by its front panel port.
2-19 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.3 Optical Add and Drop Cards 2.2.3 Optical Add and Drop Cards This section describes the internal parameter and performance information for the 32WSS, 32WSS-L, 32DMX, 32DMX-L, 32DMX-O, 32DMX-L, AD-1B-xx.
2-20 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.3 Optical Add and Drop Cards T able 2-8 32WSS Card P arameters and P erfor mance Parameter Condition Min T ypical Max Unit Channel grid –0.
2-21 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.3 Optical Add and Drop Cards 2.2.3.2 32WSS-L Card The 32WSS-L card is capable of operating bidirectionally ov er the L band of the optical spectrum (wa velengths from 1577 nm to 1605 nm).
2-22 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.3 Optical Add and Drop Cards The 32WSS-L card supports OChSPRing protection. This implies that the optical plug-in module needs to perform a switch fast enough to allo w a total unit switching time of less than 10 ms.
2-23 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.3 Optical Add and Drop Cards 2.2.3.4 32DMX-L Card The 32DMX-L is a unidirectional unit that operates ov er the L band of the optical spectrum in wa velengths from 1577 nm to 1605 nm.
2-24 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.3 Optical Add and Drop Cards When output ports are connected to the client equipment, an external b ulk attenuator might be required to match the receiv e (Rx) window of the interface.
2-25 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.3 Optical Add and Drop Cards 2.2.3.6 32DMX-O Card T able 2-13 def ines the optical parameters for the 32DMX-O card.
2-26 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.3 Optical Add and Drop Cards 2.2.3.7 4MD-xx.
2-27 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.3 Optical Add and Drop Cards 2.2.3.8 C-Band OADM Filter Cards T able 2-15 to T able 2-19 def ine optical parameters for the AD-1B-xx.x, AD-4B-xx.
2-28 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.3 Optical Add and Drop Cards In-band ripple 0.
2-29 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.3 Optical Add and Drop Cards 2.2.3.9 MMU Card The MMU is a single-slot bidirectional card that operates ov er both the C-band and L-band optical spectrums.
2-30 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.4 Optical Amplifiers 2.2.4 Optical Amplifiers The optical amplif ier cards can be installed in Slots 1 through 6 and 12 through 17.
2-31 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.4 Optical Amplifiers 2.2.4.1 OPT-PRE Card T able 2-21 provides the internal parameters and performance information for the OPT -PRE preamplif ier card.
2-32 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.4 Optical Amplifiers T able 2-22 indicates the extended po wer and gain range for OPT -PRE card. Figure 2-5 sho ws a graphical representation of an extended range po wer mask for an OPT -PRE card.
2-33 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.4 Optical Amplifiers Figure 2-6 sho ws a graphical representation of the power mask for the OPT -BST card. Figur e 2-6 OPT -BST Car d Po wer Mask T able 2-24 def ines the power and gain specif ications for the OPT -BST -E card.
2-34 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.4 Optical Amplifiers Figure 2-7 sho ws a graphical representation of standard extended gain range for the OPT -BST -E card. Figur e 2-7 OPT -BST -E Car d Standard and Extended Gain Rang e 2.
2-35 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.4 Optical Amplifiers • Full monitoring and alarm handling capability with settable .
2-36 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.4 Optical Amplifiers Figure 2-9 sho ws the internal functional structure for the OPT -BST -L card.
2-37 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.4 Optical Amplifiers The OPT -AMP-L card implements the following optical safety func.
2-38 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.4 Optical Amplifiers Figur e 2-1 0 OPT -AMP -L Card Standard and Ext ended Gain Range Figure 2-11 sho ws the internal functional structure of the OPT -AMP-L card.
2-39 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.5 Dispersion Compensation Units Figur e 2-1 1 OPT -AMP -L Card F unctional Block Diagram The card faceplate sho ws the optical loss (in dB) of the monitor ports provided by the OPT -AMP-L card.
2-40 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.5 Dispersion Compensation Units Each C-band DCU can compensate a maximum of 65 km of single-mode f iber (SMF-28). DCUs can be cascaded to extend the compensation to 130 km.
2-41 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.5 Dispersion Compensation Units 2.2.5.1 DCU Mechanical Specifications The DCU subrack is designed to comply with all international standards.
2-42 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.6 Transponder, Muxponder, and Optical Cards 2.
2-43 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.6 Transponder, Muxponder, and Optical Cards 195.5 1533.47 — — — 194.9 1538.19 15454-10M-L1-38 .1= 15454-10T -L1-38. 1= 15454-10E-L1-38.
2-44 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.6 Transponder, Muxponder, and Optical Cards The TXP and MXP cards support the follo wing L-band range of wa velengths in increments of 100 GHz.
2-45 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.6 Transponder, Muxponder, and Optical Cards T able 2-30 Suppor ted L -Band W avelengt.
2-46 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.6 Transponder, Muxponder, and Optical Cards 2.2.6.1 OC48 ITU-T Optics The Cisco ONS 15454 supports a range of wa velengths in increments of 100 GHz and 200 GHz with its OC48 ITU-T optics, as shown in T able 2-31 .
2-47 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.6 Transponder, Muxponder, and Optical Cards X 1532.68 195.6 X 1533.47 195.5 X 1534.28 195.4 X 1535.04 195.3 X 1535.82 195.2 X 1536.61 195.
2-48 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.6 Transponder, Muxponder, and Optical Cards The ONS 15454 OC48 ITU-T cards provide you with 37 separate ITU-T channels to choose from.
2-49 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.6 Transponder, Muxponder, and Optical Cards The ONS 15454 of fers eight OC192 ITU-T cards. Each card provides a long-reach SONET compliant 9.
2-50 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.6 Transponder, Muxponder, and Optical Cards T able 2-33 Client Services Program Name Client Service T ype Client Interface (SFP/XFP) SFP/XFP Product ID (ANSI) SFP/XFP Product ID (ETSI) — Gigabit Ethernet 1000Base-LX (IEEE 802.
2-51 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.7 Y-Cable Module For more information on SFPs and XFPs, refer to the “SFP Specif ications” and “XFP Specif ications” sections in Cisco ONS 15454 D WDM Reference Manual .
2-52 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.7 Y-Cable Module Figur e 2-13 Multimode Y -Cable Split ter Module T able 2-34 sho ws operating parameters for a multimode Y -cable module.
2-53 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.8 Mechanical Equipment 2.2.8 Mechanical Equipment The follo wing section describes me.
2-54 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.8 Mechanical Equipment Figur e 2-14 Y -Cable Shelf Fiber Routing 2.2.8.5 Fiber Storage The f iber storage tray has height of 1 RU and can be installed in 19” (482.
2-55 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.8 Mechanical Equipment Figur e 2-15 32-Channel P atch P anel Shelf Fiber Routing The PP-64 contains 64 LC-LC adapters and manages up to eight multif iber cables.
2-56 Cisco ONS 15454 DWDM Engineering and Planning Guide, Release 7.x July 2006 Chapter 2 Cards Specifications 2.2.8 Mechanical Equipment.
デバイスCisco Systems 15454の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Cisco Systems 15454をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCisco Systems 15454の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Cisco Systems 15454の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Cisco Systems 15454で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Cisco Systems 15454を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCisco Systems 15454の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Cisco Systems 15454に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCisco Systems 15454デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
