Cisco SystemsメーカーCisco ONS 15454 SDHの使用説明書/サービス説明書
ページ先へ移動 of 34
CHAPTER 4-1 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 4 Turn Up Node This chapter explains ho w to provision a single Cisco ONS 15454 SDH node and turn it up for service, including node n.
4-2 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node NTP-D24 Verify Card Installation 8. NTP-D170 Create Protection Groups, page 4-26 —Complete this procedure, as needed, to set up 1:1, 1:N, 1+1, or Y -cable protection groups for ONS 15454 SDH electrical and optical cards.
4-3 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node NTP-D24 Verify Card Installation Step 6 V erify that electrical cards (E1-N-14, E1-42, E3-12, DS3I-N-12, or STM1E) are installed in the ONS 15454 SDH slots as designated by your installation plan.
4-4 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node NTP-D30 Create Users and Assign Security NTP-D30 Create Users and Assign Security Step 1 Complete the “DLP-D60 Log into CTC” task on page 3-24 at the node where you want to create users.
4-5 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D75 Create a New User—Multiple Nodes • Passw ord—T ype the user password.
4-6 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node NTP-D25 Set Up Name, Date, Time, and Contact Information • Security Lev el—Choose a security lev el for the user: RETRIEVE, MAINTEN ANCE, PR O VISIONING, or SUPER USER.
4-7 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node NTP-D25 Set Up Name, Date, Time, and Contact Information Ti p Y ou can also position nodes manually on the network vie w map. Press Ctrl then drag and drop the node icon.
4-8 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node NTP-D279 Set Power Monitor Thresholds Step 6 Revie w the node information.
4-9 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node NTP-D169 Set Up CTC Network Access NTP-D169 Set Up CTC Network Access Step 1 Complete the “DLP-D60 Log into CTC” task on page 3-24 . If you are already logged in, continue with Step 2 .
4-10 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D249 Provision IP Settings DLP-D249 Provision IP Settings Caution All network changes should be approv ed by your network (or LAN) administrator .
4-11 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D249 Provision IP Settings • MA C Address—( Display only . ) Displays the ONS 15454 SDH IEEE 802 MA C address.
4-12 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D249 Provision IP Settings Step 5 Click OK . The network vie w appears. The node icon appears in gray , during which time you cannot access the node. Step 6 Double-click the node icon when it becomes green.
4-13 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D64 Set the IP Address, Default Router, and Network Mask Using the LCD Step 7 Return to your originating procedure (NTP).
4-14 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D64 Set the IP Address, Default Router, and Network Mask Using the LCD Figur e 4-2 Changing the IP A ddress Step 4 Push the Slot button to mo ve to the IP address or subnet mask digit you need to change.
4-15 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D65 Create a Static Route Step 10 Return to your originating procedure (NTP). DLP-D65 Create a Static Route Step 1 In node vie w , click the Provisioning > Network tabs.
4-16 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D250 Set Up or Change Open Shortest Path First Protocol DLP-D250 Set Up or Change Open Shortest Path First Protocol Step 1 In node vie w , click the Provisioning > Network > OSPF tabs.
4-17 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D250 Set Up or Change Open Shortest Path First Protocol Step 5 Provision the OSPF priority and interv al settings: The OSPF priority and interval def aults are ones most commonly used by OSPF routers.
4-18 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D251 Set Up or Change Routing Information Protocol • Retransmit Int (sec)—Sets the time that will elapse before a packet is resent. Fi ve seconds is the default.
4-19 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node NTP-D27 Set Up the ONS 15454 SDH for Firewall Access Step 6 If you want to complete an address summary , complete the follo wing steps.
4-20 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D67 Provision the IIOP Listener Port on the ONS 15454 SDH Step 3 If the CTC computer resides behind a f irew all, complete the “DLP-D68 Provision the IIOP Listener Port on the CTC Computer” task on page 4-22 .
4-21 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D67 Provision the IIOP Listener Port on the ONS 15454 SDH Step 3 Click Apply . Step 4 When the Change Network Conf iguration message appears, click Y es . Both ONS 15454 SDH TCC2s reboot, one at a time.
4-22 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D68 Provision the IIOP Listener Port on the CTC Computer DLP-D68 Provision the IIOP Listener Port on the CTC Computer Step 1 In node vie w , from the Edit menu, choose Preferences .
4-23 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D69 Set Up External or Line Timing Step 1 Complete the “DLP-D60 Log into CTC” task on page 3-24 the ONS 15454 SDH node where you want to set up timing. If you are already logged in, continue with Step 2.
4-24 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D69 Set Up External or Line Timing • E1, 2.048 MHz, 64 KHz—Choose E1 , 2.048 MHz , or 64 KHz depending on the signal supported in your market. For e xample, 64 KHz is used in Japan.
4-25 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D70 Set Up Internal Timing – T iming Mode set to Line—Y our options are the node’ s working OC-N cards (non-DWDM nodes), or OSC cards (D WDM nodes) and Internal Clock.
4-26 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node NTP-D170 Create Protection Groups • E1, 2.048 MHz, 64 KHz—Choose E1 , 2.048 MHz , or 64 KHz depending on the signal supported in your market. For e xample, 64 KHz is used in Japan.
4-27 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node NTP-D170 Create Protection Groups T able 4-3 describes the protection types a vailable on the ONS 15454 SDH.
4-28 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D71 Create a 1:1 Protection Group DLP-D71 Create a 1:1 Protection Group Step 1 V erify that the cards required for 1:1 protection are installed according to requirements specif ied in T able 4-3 .
4-29 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D72 Create a 1:N Protection Group DLP-D72 Create a 1:N Protection Group Step 1 V erify that the cards are installed according to 1:N requirements specif ied in T able 4-3 on page 4-27 .
4-30 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D73 Create a 1+1 Protection Group DLP-D73 Create a 1+1 Protection Group Step 1 V erify that the cards are installed according to the 1+1 requirements specif ied in T able 4-3 on page 4-27 .
4-31 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D252 Create a Y-Cable Protection Group DLP-D252 Create a Y-Cable Protection Group Step 1 V erify that the transponder or muxponder cards are installed according to the Y -cable requirements specif ied in T able 4-3 on page 4-27 .
4-32 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node NTP-D34 Set Up SNMP Step 5 From the A v ailable Ports list, choose the port that will be protected by the port you selected in Protect Ports. Click the top arrow b utton to move each port to the W orking Ports list.
4-33 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node NTP-D34 Set Up SNMP Note The community name is a form of authentication and access control. The community name assigned to the ONS 15454 SDH is case-sensitiv e and must match the community name of the network management system (NMS).
4-34 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node NTP-D34 Set Up SNMP.
デバイスCisco Systems Cisco ONS 15454 SDHの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Cisco Systems Cisco ONS 15454 SDHをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCisco Systems Cisco ONS 15454 SDHの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Cisco Systems Cisco ONS 15454 SDHの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Cisco Systems Cisco ONS 15454 SDHで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Cisco Systems Cisco ONS 15454 SDHを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCisco Systems Cisco ONS 15454 SDHの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Cisco Systems Cisco ONS 15454 SDHに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCisco Systems Cisco ONS 15454 SDHデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
