Cisco SystemsメーカーOL-4858-07の使用説明書/サービス説明書
ページ先へ移動 of 36
CHAPTER 6-1 Multiprocessor WAN Application Module User Guide OL-4858-07 6 Command Reference This chapter lists new and re vised commands specif ic to the MW AM conf iguration. The commands are categorized according to the console from which the y are executed.
6-2 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Processor Control Commands Processor Control Commands The Processor Control (PC) commands are av ailable when you session into MW AM processor 1 from the Supervisor console.
6-3 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details Command Details mwam module allowed-vlan T o conf igure the Ethernet connectivity from the backplane (i.e., switch fabric) to the indi vidual processors on the MW AM, use the mwam module allowed-vlan command in global conf iguration mode.
6-4 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details mwam module vlan-based T o assign MW AM traff ic to a VLAN QoS policy , use the mwam module vlan-based command in global conf iguration mode. T o remove this conf iguration, use the no form of the command.
6-5 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details session slot T o establish a command session to a processor on an MW AM, use the session slot command in privile ged EXEC mode.
6-6 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details Tue Oct 14 11:04:43 EDT 2003 Copyright (c) 2002-2003 by cisco Systems, Inc. All rights reserved. Kernel 2.4.10.komodo on an i686 login: root Password: SVCMWAM Image version 2.
6-7 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show mwam module T o display connectivity information about the indi vidual processors on the MW AM, use the show mwam module command in pri vileged EXEC mode.
6-8 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details Last clearing of "show interface" counters never Input queue: 0/2000/0/0 (size/max.
6-9 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details Administrative Trunking Encapsulation: dot1q Operational Trunking Encapsulation: dot1q Negot.
6-10 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details mwam bootflash access Note The MW AM bootf lash access must be enabled if you want to operate in Supervisor mode.
6-11 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details logging listen mwam T o conf igure MW AM logging input to the Supervisor from an MW AM in the chassis, use the logging listen mwam command in global conf iguration mode.
6-12 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details The port numbering pattern is important if you are conf iguring other UDP ports on either the Supervisor or the MW AM processor .
6-13 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details execute-on T o initiate a remote command request on an MW AM processor from the Supervisor console, use the execute-on command in pri vileged EXEC mode.
6-14 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details T o terminate a remote command that is in progress, the user can activ ate the escape sequence def ined on the Supervisor console.
6-15 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details mwam module cpu logging T o conf igure the severity le vel of MW AM logging information to send to the Supervisor module, use the mwam module cpu logging command in global conf iguration mode.
6-16 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details The following e xample allows the Supervisor console to display deb ugging log messages rec.
6-17 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show logging T o display the slav e log options that are enabled on the MW AM, use the show logging command in privile ged EXEC mode.
6-18 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details Field descriptions for the output of this command are listed below: Activ e Processor is operational and remote console/logging is acti ve. Online Processor is operational but remote console/logging is not acti ve.
6-19 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details clear logging slot T o clear the slav e log options that are enabled on the MW AM, use the clear logging slot command in privile ged EXEC mode.
6-20 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show processor T o show status information about an MW AM processor, use the sho w processor command av ailable at the PC complex (processor 1 on the MW AM).
6-21 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details 0% CPU Utilization Messages 4115/4115 VRTC Update(s) acked by PC 244528/244528 Heartbeats(s.
6-22 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show log T o show the upgrade or restart logs, use the sho w log command av ailable at the PC complex (processor 1 on the MW AM). show log { upgrade | r estart } Syntax Description Defaults There are no default beha vior or values.
6-23 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details reload T o reload processors on an MW AM, use the reload command a vailable at the PC complex (processor 1 on the MW AM).
6-24 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details recover-ios T o set the conf iguration register to boot with a clean conf iguration, use the reco ver-ios command av ailable at the PC complex (processor 1 on the MW AM).
6-25 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details normal-ios T o set the conf iguration register to boot with a normal conf iguration, use the normal-ios command av ailable at the PC complex (processor 1 on the MW AM).
6-26 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show images T o list the images stored on the MW AM, use the show images command available at the PC comple x (processor 1 on the MW AM). show images Syntax Description This command has no arguments or k eywords.
6-27 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details restore T o restore the pre viously loaded IOS image and ROM-Monitor image, use the r estore command av ailable at the PC complex (processor 1 on the MW AM).
6-28 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show tech-support T o display general information about the MW AM and its processors when it reports a problem, use the show tech-support command a vailable at the PC complex (processor 1 on the MW AM).
6-29 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show version T o display information about the currently loaded software version along with hardw are and device information, use the show version command a vailable at the PC comple x (processor 1 on the MW AM).
6-30 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details mwam config-mode T o set the MW AM conf iguration f ile storage mode, use the mwam conf ig-mode command in privileged EXEC mode from the MW AM console.
6-31 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show mwam config-mode T o sho w the MW AM conf iguration f ile storage mode, use the show mwam conf ig-mode command in privile ged EXEC mode. show mwam conf ig-mode Syntax Description Defaults There are no default beha vior or values.
6-32 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details logging main-cpu T o conf igure MW AM log redirection to the Supervisor for all ev ents up to a maximum specif ied log lev el, use the logging main-cpu command in global conf iguration mode.
6-33 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details When selecting the UDP port for an MW AM processor , you are def ining a base UDP port used at the Supervisor . T wo additional source ports, based on the selected port, are then automatically def ined.
6-34 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show mwam T o show MW AM T ransation Look-aside Buf fers (TLBs) and cache errors, use the show mwam command in privile ged EXEC mode. show mwam Syntax Description Defaults There are no default beha vior or values.
6-35 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details 0x21480000:0x214FFFFF 0x001480000:0x0014FFFFF CacheMode=5, RO, Valid 0x21500000:0x2151FFFF .
6-36 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details.
デバイスCisco Systems OL-4858-07の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Cisco Systems OL-4858-07をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCisco Systems OL-4858-07の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Cisco Systems OL-4858-07の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Cisco Systems OL-4858-07で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Cisco Systems OL-4858-07を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCisco Systems OL-4858-07の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Cisco Systems OL-4858-07に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCisco Systems OL-4858-07デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
