Cisco SystemsメーカーONS 15600 SDHの使用説明書/サービス説明書
ページ先へ移動 of 120
CH A P T E R 18-1 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 18 DLPs F300 to F399 DLP-F300 Install Fiber-Optic Cables for SNCP Configurations Caution T o a void loss of traf f ic, do not create an SNCP usi ng two por ts on the same card.
18-2 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F301 Edit SNCP Dual-Ring Interconnect Circuit Hold-Off Timer DLP-F301 Edit SNCP Dual-Ring Interconnect Cir.
18-3 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F303 Delete Overhead Circuits Step 1 From the V iew menu, choose Go to Netw ork V iew . Step 2 Click the Pro visioning > Overhead Cir cuits tabs. Step 3 Click the circuit tunnel that y ou want to con vert.
18-4 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F304 Repair an IP Tunnel DLP-F304 Repair an IP Tunnel Step 1 Obtain the original IP address of t h e node in question. Step 2 From the V iew menu, choose Go to Netw ork View .
18-5 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F305 Provision Path Trace on Circuit Sourc e and Destination Ports Step 4 Choose the VC circuit you w ant to trace, then click Edit . Step 5 In the Edit Circuit windo w , click the Sho w Detailed Map check box at the bottom of the window .
18-6 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F305 Provision Path T race on Circuit Source and Destina tion Ports Figur e 18-1 Selecting the Edit P ath T race Option b. In the New Expected String f ield, enter the circuit source transmit stri ng.
18-7 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F305 Provision Path Trace on Circuit Sourc e and Destination Ports • Auto—The first string recei ved from the source port is automatically prov isioned as the current expect ed string.
18-8 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F306 Provision Path Trace on STM-N Ports • Click Default to return to the path trace default settings (P ath T race M ode is set to Of f and the New T ransmit and Ne w Expected Strings are null).
18-9 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F307 Create Login Node Groups • Auto—Uses the first string rece i ved from the port at the ot her path trace end as the current expected string. An alarm is raised when a string that differs from the basel i ne is receiv ed.
18-10 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F308 Delete a N ode from the Current Session or Login Gr oup Figure 1 8-2 Login Node Group Step 8 Return to your ori ginating procedure (NTP).
18-11 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F309 Configure the CTC Alerts Dialog Box for Automatic Popup DLP-F309 Configure the CTC Alerts Dialog Box for Automatic Popup Step 1 Click the CTC Alerts toolbar icon.
18-12 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F311 Remove Pa ss-through Connections Step 4 Choose the JRE ve rsion. Step 5 Click OK . Step 6 From the File menu, choose Exit . Step 7 In the conf irmation dialog box, click Ye s .
18-13 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F312 Delete a Node from a Specified Login Node Group DLP-F312 Delete a Node from a Specified Login Node Group Step 1 From the CTC Edit menu, choose Pr eferences .
18-14 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F314 Provision MS-DCC Terminatio ns • Locked,maintenance —Puts the circuit cross-connects in th e Locked -enabled,m aintenance service state.
18-15 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F314 Provision MS-DCC Termination s Note When MS- DCC is pr ovisioned, an R S-DCC t erminati on is allowed on the sa me port , but is not recommended.
18-16 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F315 Provision a Proxy Tunnel – ISH—Sets the Intermediate System Hello PDU propagation f requency . Intermediate system NEs send ISHs to other ESs and ISs to inform them about the IS NETs it serves.
18-17 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F316 Provision a Firewall Tunnel Step 4 Click OK . Step 5 Continue with your originating proced ure (NTP). DLP-F316 Provision a Firewall Tunnel Note If the proxy serv er is configured as proxy-o n ly or is disabled, yo u cannot set up a f irewall tunn el.
18-18 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F317 Delete a Prox y Tunnel DLP-F317 Delete a Proxy Tunnel Step 1 Click the Pro visioning > Network > Proxy subtabs. Step 2 Click the proxy tunnel that you w ant to delete.
18-19 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F319 Change an RS-DCC Termination DLP-F319 Change an RS-DCC Termination Step 1 Click the Pro visioning > Comm Channels > RS-DCC tabs. Step 2 Click the RS-DCC that you wa nt to change.
18-20 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F321 Delete an RS-DCC Ter mination • Far End i s Foreign—Check this box to specify that the MS-DCC terminat ion is a non-ONS node.
18-21 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F323 Use the Reinitialization Tool to Clear the Database and Upload Software (UNIX) Caution Deleting a DCC termination can cause you to lose visibility of nodes that do not hav e other DCCs or network co nnections to the CTC computer .
18-22 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F324 Provision ASAP Ethernet Ports • Password—Enter the password for the user ID. • Upload Package—Check this box to send the software package fi le to the node.
18-23 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F325 Provision ASAP POS Ports Step 3 For each port, pro vision the following parameters: • Port Name—If you want t o label the port, type the port name.
18-24 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F326 View ASAP STM-N PM Parameters Note An Encapsula tion Mismatch Path (ENC A P-MISMA TC H-P) alarm appears when a point-to-point circui t is created between two Et hernet card ports with incompatible encapsulation payload types.
18-25 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F327 View ASAP Ether P o rts Statistics PM Parameters Figur e 18-3 Viewin g ASAP Card P erfor mance Monit or ing Infor mation Step 3 In the Port drop-do wn list, choose the port that you w ant to monitor .
18-26 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F327 View ASAP Ether Po rts Statistics PM Parameters Step 1 In node vie w , double-click the card where you w ant to view PM counts. The car d vie w appears.
18-27 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F328 View ASAP Ether Ports Utilization PM Parameters DLP-F328 View ASAP Ether Ports Utilization PM Parameters Step 1 In node vie w , double-click the ASAP card where you w ant to view PM counts.
18-28 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F329 View ASAP POS Po rts Statistics PM Parameters Step 6 Return to your ori ginating procedure (NTP). DLP-F329 View ASAP POS Ports Statistics PM Parameters Step 1 In node vie w , double-click the ASAP card where you w ant to view PM counts.
18-29 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F330 View ASAP POS Ports Utilization PM Parameters Note T o refresh, reset, or clear PM counts, see the “NTP-F18 4 Change the PM Display” pro cedure on page 8-2 .
18-30 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F331 View ASAP POS Po rts History PM Parameters Step 4 V iew the Port # column f or the port that you want to monit or . Step 5 The Tx and Rx bandwidth utilization v alues for the previous time int erv als appear in the Pre v- n columns.
18-31 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F332 Change Node Acce ss and PM Clearing Privilege Figure 1 8-8 Ether net POS Por ts History in the Card View P erfor mance Win dow Step 3 Click Refresh . Performance monitoring statistics appear for each port on the card.
18-32 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F332 Change Node A c cess and PM Clearing Pr ivilege Step 1 In node vie w , click the Pro visioning > Security > Access ta bs.
18-33 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F333 Install the ASAP Carrier Modules Step 10 Return to your ori ginating procedure (NTP). DLP-F333 Install the ASAP Carrier Modules War ni n g During this procedure, wear grounding wrist straps to avoid ESD damage to the card.
18-34 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F334 Verify Pass-Through C ircuits Step 4 V erify the LED a cti vity on the c ard faceplate: 1. The ST A T , SR V , and LASER ON LEDs turn on for 20 seconds.
18-35 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F335 Preprovision an SFP DLP-F335 Preprovision an SFP Note If you preprov i sion a multirate SF P , you must ne xt select the line rate using the “DLP-F390 Provision an Optical Line Rat e and W a velength” task on page 18- 103 .
18-36 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F336 Print CTC Data Note Only the parameters that are editabl e for the PPMs on a particular platfo rm type are provisi onable. For example, some platforms may not ha ve PPMs with conf igurable wa velengths or reaches.
18-37 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F337 View ASAP Ether Ports History PM Parameters • Maintena nce > Protecti on window • Maintena nc.
18-38 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F338 Create a Two-Fiber MS- SPRing Us ing the MS-SPRing Wizard Figur e 18-1 0 Ether net Ether P orts History on the Car d View P erformance Windo w Step 3 Click Refr esh .
18-39 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F338 Create a Two-Fiber MS-SPRing Using the MS-SPRing Wizard Step 1 From the V iew menu, choose Go to Netw ork View . Step 2 Click the Pr ovisioning > MS-SPRing tabs.
18-40 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F339 Create a Two- Fiber MS-SPRing Manually • On the network view graphic, a green span line appears b etween all MS-SPRing nodes. • All E-W -MISMA TCH, RING-MISMA TC H, A PSCIMP , APSCDFL TK, and MSSP-OOSYNC alarms are cleared.
18-41 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F340 Change an MS-SPRing Node ID • East Line—Assign the east MS-SPRi ng port for the node from the d rop-do wn list.
18-42 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F341 MS-SPRing Exercise Ring Test DLP-F341 MS-SPRing Exercise Ring Test Step 1 From the V iew menu, choose Go T o Network V iew . Step 2 Click the Pro visioning > MS-SPRing ta bs.
18-43 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F342 MS-SPRing Switch Test If you do not see an y MS-SPRing ex ercise conditions, click the Filter b utton and verify that f iltering is not turned on. Also, check that al arms and conditions ar e not suppressed for a node or MS-SPRing drop cards.
18-44 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F342 MS-SPRing Switch Test Step 5 V erify the conditions: a.
18-45 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F342 MS-SPRing Switch Test Step 11 Clear the switch on the west port: a. Right-click the west por t of the MS-SPRing node where you in voked the Force Ri ng switch and choose Set W est Protection Operation .
18-46 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F342 MS-SPRing Switch Test • RING-SW -EAST—A Ring Switch Acti ve on the east side condition is repor ted against the working span on the west side of the node.
18-47 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F343 Provision an STM-N Circuit Route DLP-F343 Provision an STM-N Circuit Route Step 1 In the Circuit Creation wizard in the Route Revie w/Edit area, click the source node icon i f it is not already selected.
18-48 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F345 Clear an MS-SPRing Manual Ring Switch Caution T raff ic is not protected during a manual ring protection switch. Step 1 From the V iew menu, choose Go T o Network V iew .
18-49 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F346 Create an MS-SPRing on a Single Node Ti p T o move an icon to a ne w location, for exampl e, to see .
18-50 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F347 Initiate an MS-S PRing Force Ring Switch Note The MS-SPRing is incomplete and alarms are pr esent until the node is connected to other MS-SPRing nodes.
18-51 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F348 View Circuit Information On the network graphic, an F appears on the working M S-SPRin g channel where you in voked the protection switch. The span lines chan ge c olor to reflect the forced traf f ic.
18-52 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F348 View Circuit Inf ormation Note In node or card view , you can change th e scope of the circuits that are displayed by choosing Card (in card vie w), Node, or Network fr om the Scope drop-do wn list in the bottom right corner of the Circuits window .
18-53 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F348 View Circuit Information T able 18-3 ONS 1560 0 SDH Circuit Status Status Definition/Activity CREA TIN G CTC is creating a circuit. DISCO VERED CTC created a circuit.
18-54 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F349 Install Fibe r-Optic Cables for MS -SPRing Configurations • Source—The circuit source in the format: node/slot/port/STS .
18-55 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F349 Install Fiber-Optic Cabl es for MS-SPRing Configurations Caution Do not pro vision the MS-SPRing east and west ports on th e same STM-N card.
18-56 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F350 Delete an MS-SPRing from a Single Node Step 4 Return to your ori ginating procedure (NTP).
18-57 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F351 Roll the Source or Destination of One Optical Circuit Step 4 From the T ools menu , choose Circuits > Roll Cir cuit . Step 5 In the Roll Attrib utes area, complete the follo wing ( Figure 18-12 ): a.
18-58 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F351 Roll the Source or Destination of One Optical Circuit Figur e 18-13 Selecting a P at h Step 8 Click Next .
18-59 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F351 Roll the Source or Destination of One Optical Circuit Step 11 Click the Rolls tab ( Figure 18-15 ). F or the pending roll, vie w the Roll V alid Signal status.
18-60 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F352 Roll One Cross-Connec t from an Optical Circuit to a Second Optical Circuit DLP-F352 Roll One Cross-Connect from an Optical Circuit to a Second Optical Circuit Step 1 From the V iew menu, choose Go T o Network V iew .
18-61 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F352 Roll One Cross-Connect from an Optical Circu it to a Second Optical Circuit Figure 1 8-16 Selecting Roll Attr ibutes for a Single Roll onto a Second Circuit Step 6 Click Next .
18-62 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F353 Roll Two Cross-Connects on One Optical Circuit Using Automatic Routing Step 12 If you selected Manual in Step 5 , click the roll on the Rolls ta b and click Complete to route the traf fic to the ne w port.
18-63 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F353 Roll Two Cross-Connects on One Optical Circuit Using Automatic Routing Figur e 18-1 7 Selecting Dual Roll At tr ibutes Step 6 Click Next .
18-64 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F353 Roll Two Cross-Connects on One Optical Circuit Using Automatic Routing Figure 1 8-18 Setting Roll Routing Pr ef er ences Step 13 T o route the circuit ov er a protected path, check Fully Protected Path .
18-65 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F353 Roll Two Cross-Connects on One Optical Circuit Using Automatic Routing Step 16 If you check ed Re view Route Before Creation in Step 12 : a. In the Roll Route Re view an d Edit area, revie w the circuit route.
18-66 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F354 Roll Two Cross-Connects on One Optical Circuit Using Manu al Routing DLP-F354 Roll Two Cross-Connects on One Optical Circuit Using Manual Routing Step 1 From the V iew menu, choose Go T o Network V iew .
18-67 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F354 Roll Two Cross-Connects on One Optical Circuit Using Manual Routing • T o route the circuit on a protected path, leav e Fully Protected Path check ed and continue with Step 14 .
18-68 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F355 Roll Two Cros s-Connects from One Optical Circuit to a Second Optical Circuit DLP-F355 Roll Two Cross-Connects from One Optical Circuit to a Second Optical Circuit Step 1 From the V iew menu, choose Go T o Network V iew .
18-69 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F356 Delete a Roll Step 11 Click Next . Step 12 Click Finish . In the Circuits tab, the Roll From and Ro ll T o circuits change from the DISCO VERED status to R OLL RENDING.
18-70 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F357 Cancel a Roll Step 3 Click the rolled circuit that you w ant to delete. Step 4 From the T ools menu , choose Circuits > Delete Ro lls . Step 5 In the conf irmation dialog box, click Ye s .
18-71 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F359 Change the Optic al Line Rate Note The ASAP card hosts up to four 4PIO modules. Each 4PIO hosts four SFPs, which pr ovide a fiber interface that must be pro visioned as STM-1, ST M-4, STM-16, or Gigabit Ethernet.
18-72 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F360 Delete a PPM Step 6 Click Ye s in the Confirm Port Rate Change d ialog box. Step 7 Return to your ori ginating procedure (NTP). DLP-F360 Delete a PPM Step 1 Determine if you can delete th e PPM.
18-73 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F361 Provision OSI Routing Mode Step 7 Return to your ori ginating procedure (NTP). DLP-F361 Provision OSI Routing Mode Caution Do not complete this task unti l you confirm the role of the node within t he network.
18-74 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F362 Provision or Modify TARP Operating Parameters • Intermediate System Level 1/Le vel 2 —The ONS 15600 SDH performs IS functions. It communicates with IS and ES nodes th at reside within its OSI area.
18-75 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F362 Provision or Modify TARP Operating Parameters • T ARP PDUs Origination—If checked (def ault), th.
18-76 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F363 Add a Static TID -to-NSAP Entry to the TA RP Data Cache • LDB Flush—Sets the frequenc y period for flushing the LDB. The def ault is 5 minutes. The range is 0 to 1440 minutes.
18-77 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F364 Remove a Static TID-to-NSAP Entry from the TARP Data Cache DLP-F364 Remove a Static TID-to-NSAP Entry from the TARP Data Cache Step 1 In node vie w , click the Pro visioning > OSI > T ARP > Static TDC tabs.
18-78 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F366 Provision OSI Routers Step 5 Return to your ori ginating procedure (NTP). DLP-F366 Provision OSI Routers Note Router 1 must be enabled before you can enable and edit the primary manu al area addresses for Routers 2 through 12.
18-79 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F367 Provision Additional Manual Area Addresses DLP-F367 Provision Additional Manual Area Addresses Step 1 Click the Pro visioning > OSI > Routers > Setup tabs.
18-80 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F369 Create an IP-Over-CLNS Tunnel Step 1 Complete the “DLP-F181 Log into CTC” task on pa ge 16-34 at the node who se OSI routers y ou want to provisi on.
18-81 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F370 Remove a TARP Manual Ad jacency Table Entry Step 3 Click Crea te .
18-82 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F371 Change the OSI Routing Mode Step 2 Click the MA T entry that you want to delete. Step 3 Click Rem ove . Step 4 In the Delete TDC Entry di alog box, clic k OK .
18-83 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F372 Edit the OSI Router Configuration Note Changing a routing mode shoul d be carefully considered.
18-84 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F373 Edit the OSI Subnetwork Point of Attachment DLP-F373 Edit the OSI Subnetwork Point of Attachment Step 1 In the node vie w , click the Pro v isioning > OSI > Routers > Subnet tabs.
18-85 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F375 Delete an IP-Over-CLNS Tunnel Caution Changing the IP or NSAP addresses or an IP-o ver- CLNS tunnel can cause loss o f NE visibility or NE isolation. Do not change netw ork addresses until you ver ify the changes with your network administrator .
18-86 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F376 View IS-IS Routing Information Base Caution Deleting an IP-o ver-CLN S tunnel might cause t h e nodes to lose visibilit y or cause node isolation. If node isolation occurs, onsi te provisioning might be required to regain connectivity .
18-87 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F377 View ES-IS Routing Information Base DLP-F377 View ES-IS Routing Information Base Step 1 In the node vie w , click the Maintenance > OSI > ES-IS RIB tabs.
18-88 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F379 Export CTC Data • NSAP/NET—The Network Service Access Poin t or Network Element T itle of the originating NE. • T ype—Indicates ho w the TDC entry was created: – Dynamic —The entry was created through t he T ARP propag ation process.
18-89 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F379 Export CTC Data Step 3 From the CTC File menu, click Export . Step 4 In the Export dialog box choose a format for t he data ( Figure 18-19 ): • As HTML —Saves the data as an HTML f ile.
18-90 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F380 Configure the N ode for RADIUS Authentication • Maintena nce > Database w indow • Maintena nc.
18-91 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F380 Configure the Node for RADIUS Authentication 1 for Maintenance User 2 for Prov isioning User 3 for Super User Step 1 In node vie w , click the Pr ovisioning > Se curity > RADIUS Server tabs ( Figu re 18-20 ).
18-92 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F381 Delete a Server Trail Step 4 Enter the shared secret in th e Shared Secret field. A shared secret is a text string that serves as a password between a RADIU S client and RADIUS server .
18-93 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F382 Grant Superuser Privileges to a Provisioning User Step 6 Return to your ori ginating procedure (NTP). DLP-F382 Grant Superuser Privil eges to a Provisioning User Step 1 In node vie w , click the Pro visioning > Defaults tabs.
18-94 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F383 Download an Al arm Severity Profile Step 1 T o access the alarm profile editor from network vie w , .
18-95 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F384 Install the ASAP 1PIO and 4PIO (PIM) Modul es DLP-F384 Install the ASAP 1PIO and 4PIO (PIM) Modules War ni n g During this procedure, wear grounding wrist straps to avoid ESD damage to the card.
18-96 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F384 Install the ASAP 1PIO and 4PIO (PIM) Modules Figur e 18-22 1PIO Module F aceplate Figure 18-23 sho ws the 4PIO module f aceplate.
18-97 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F385 Consolidate Links in Network View Step 5 After you ha ve logged into CTC, verify th at the card appears in the card view . See Chapter 3, “Connect the PC and Log into the GUI” for CTC information and setup instructions.
18-98 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F385 Consolidate Links in Network View Note The links consolidate by class. Fo r example, if you select a DCC link for consolidation only the DCC links will consol idate, leaving any other link classes expanded.
18-99 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F385 Consolidate Links in Network View Figur e 18-26 Netw ork V iew with Local Link Consolidation Step 6 .
18-100 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F386 Adjust the Java Virtual Memory Heap Si ze DLP-F386 Adjust the Java Virtual Memory Heap Size Step 1 From the W indo w s task bar , click Start > Settings > Contr ol Panel .
18-101 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F388 Remove an SFP/XFP Step 2 If you are installing an SFP , orient the SFP so that th e Cisco serial number label is facing aw ay from the shelf (to th e right).
18-102 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F389 Remove a 1PIO or 4PIO (PIM) Modul e DLP-F389 Remove a 1PIO or 4PIO (PIM) Module War ni ng During this procedure, wear grounding wrist straps to avoid ESD damage to the card.
18-103 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F390 Provision an Optical Line Rate and Wavelength DLP-F390 Provision an Optical Line Rate and Wavelength Step 1 In node vie w , double-click the ASAP card where you want to provision the lin e rate.
18-104 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F391 Install Alarm Wires on the CAP/CAP2 Step 12 Return to your ori ginating procedure (NTP). DLP-F391 Install Alarm Wires on the CAP/CAP2 Step 1 Wrap the alarm wires on the appropriate wire-w rap pins according to local site practice .
18-105 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F391 Install Alarm Wires on the CAP/CAP2 Figur e 18-27 Rear of the ONS 1560 0 SDH, Including the CAP/CAP2 Figure 18-28 sho ws the CAP/CAP2 facep late in detail.
18-106 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F391 Install Alarm Wires on the CAP/CAP2 Figur e 18-28 CAP/CAP2 F ace plate and Connections Figure 18-29 sho ws alarm pin assignments.
18-107 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F392 Change Line Transmi ssion Settings for STM-N Cards Figur e 18-29 Alar m Pin Assignments on the CAP/CAP2 See Chapter 9, “M anage Alarms ” for instructions about assigning alarms to these pins.
18-108 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F392 Change Line Transmi ssion Settings for STM-N Cards Step 1 On the shelf gr aphic, double-click the STM- N card th at yo u want to provisi on. The card view appear s.
18-109 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F392 Change Line Transmi ssion Settings for STM-N Cards Admin State Sets the port service state unless network conditio ns pre vent the change. • Unlocked—Puts the port in service.
18-110 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F392 Change Line Transmi ssion Settings for STM-N Cards Service State Identif ies the autonomously generated state that gi ves the overall condition of the port.
18-111 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F393 Change Threshold Se ttings for STM-N Ports Step 4 Click Apply .
18-112 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F393 Change Threshold Settings for STM-N Ports Step 1 On the shelf graphi c, double-click the STM-16, STM-64, o r ASAP card that you want to pro vision. The card vie w appears.
18-113 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F394 Change Optics Thresh old Settings for STM-N Ports Step 3 Click Apply .
18-114 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F394 Change Optics Thresh old Setti ngs for STM-N Ports c. Select a 15 Min or 1 Day performan ce monitoring interv al radio b utton (a vailable for TCA only), and then click Refre sh .
18-115 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F395 Change the STM-N Port ALS Maintenance Settings DLP-F395 Change the STM-N Port ALS Maintenance Setti.
18-116 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F396 Clear All PM Thr esholds Step 5 Return to your ori ginating procedure (NTP). DLP-F396 Clear All PM Thresholds Caution Pressing the Reset b utton can mask problems if used incorrectl y .
18-117 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F397 Provision the Designated SOCKS Servers Step 4 Click Ye s in the Reset to default di alog box. Step 5 V erify that the PM thresholds have been reset. Step 6 Return to your ori ginating procedure (NTP).
18-118 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F398 Install the CT C Launcher Applic ation from a Release 8.0 So ftware CD Step 4 Click Add . The node is added to the SOCKS serv er list. If you need to remove a node on the li st, click Rem ove .
18-119 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F399 Install the CTC Launcher Application from a Release 8.0 Node Step 1 Using a web bro wser, go to the follo wing address, where node name is the DNS name of a node you are going to access: http:// <node-name> /fs/StartCTC.
18-120 Cisco ONS 15600 SDH Procedure Guide, R8.0 October 2007 Chapter 18 DLPs F300 to F399 DLP- F399 Install the CT C Launcher Applic ation from a Release 8.
デバイスCisco Systems ONS 15600 SDHの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Cisco Systems ONS 15600 SDHをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCisco Systems ONS 15600 SDHの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Cisco Systems ONS 15600 SDHの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Cisco Systems ONS 15600 SDHで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Cisco Systems ONS 15600 SDHを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCisco Systems ONS 15600 SDHの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Cisco Systems ONS 15600 SDHに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCisco Systems ONS 15600 SDHデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。