Cliffordメーカー60の使用説明書/サービス説明書
ページ先へ移動 of 25
Owner' s Manua l World-Clas s Aut o Securit y T M concep t 6 0.
Table of Contents Standard Features of the Concept 6O . . . . . . . . . . . . . . . . . . . . 3 Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Built-in vehicle recovery/anti-carjacking circuitry . . . . . . . . . . .
All Concept Series systems are covered by one or more of the following Clifford Electronics patents: 4,158,874; 4,233,642; 4,327,444; 4,383,242; 4,430,685; 4,845,464; 4,887,064; 4,890,108; 4,922,224; 4,997,053; 5,081,667; 5,146,215; 5,157,375 and other patents pending.
Standard Features of the Concept 6O ✔ Lifetime Warranty — For as long as you own the vehicle, Clifford will repair or replace the control unit and remote controls free of charge (see warranty card for full details).
Standard Features of the Concept 6O (cont.) ✔ UltraSecure Coded Valet Mode™ — Ensures that no thief can turn off your Concept 60 like they can all other brands of alarms. Remote Controlled Valet Mode Entry and Exit — With just a press of a button from up to 100 feet away, you can enter or exit valet mode.
Standard Features of the Concept 6O (cont.) ✔ QuietChirp™ — Whenever you desire, you may choose to lower the decibel volume of the arm and disarm chirps to a level that is clearly audible but less obtrusive than the full-volume chirps. All it takes is a few flicks of a switch.
Standard Features of the Concept 6O (cont.) ✔ Use r-Programmable MultiSound Medallion™ Siren — The Concept 60 ’s innovative MultiSound Medallion siren integrates creative form and engineering triumphs. Designed entirely by Clifford engineers, there ’s no other siren like it.
Standard Features of the Concept 6O (cont.) ✔ Remote Window/Sunroof Closure Capability — On certain vehicles, the system ’s integrated timer and an optional relay can be used to automatically close the power windows and sunroof every time you remotely arm your system.
Welcome to the world of high-technology vehicle security and convenience C ongratulations on the purchase of your Concept 60 vehicle security/convenience system. Clifford Electronics has long been recognized as the world’s leading manufacturer of high-technology vehicle security systems and accessories.
Built-in vehicle recovery/anti-carjacking circuitry Concept 60’s built-in BlackJax circuitry provides a safe and effective means of recovering your vehicle after a theft or carjacking. VERY IMPORTANT: The factory setting for the anti-carjacking feature is OF F .
IMPORTANT: What you MUST do to drive your car If you have the anti-carjacking feature turned on, until you set your own disarming code, you will use the factory-set code: the single digit “2.
Enable/disable anti-carjacking You may enable or disable the anti-carjacking feature (see User-selectable features on pages 21-25) or temporarily override it via UltraSecure Coded Valet Mode (see page 15). What to do in a carjacking situation In a carjacking situation, the sooner you are out of the car the better.
To transmit either channel 1, 2, 3 or 4: Just press either button 1, 2, 3 or 4. For instance, to transmit channel 3, press button 3. While you transmit, the LED indicator will blink once every second: this indicates level 1 . To transmit either channel 5, 6, 7 or 8: Press the LevelShift button once.
TO ARM THE SYSTEM . . . . . . . Press button 1 (channel 1) once. You will hear two chirps and the parking lights will flash twice. The dashboard LED will flash repeatedly and the car doors will automatically lock. TO DISARM THE SYSTEM . . . . . . . Press button 1 (channel 1) again.
How to interpret the chirps and parking light flashes When you use the remote control, the system responds with chirps (unless the chirp muting feature is turned on) and parking light flashes.
Enhanced AutoArming™ If this feature is enabled and you forget to remotely arm, the system will automatically arm itself 30 seconds after the vehicle doors are closed. For your convenience, if you re-open any door(s) within the 30-second countdown, AutoArming will restart from the beginning once all doors are closed.
To exit valet mode 1. Turn the ignition switch to its “ON” position or start the engine (you may also perform the following while driving). 2. Flick the switch back to its center position. The LED will turn off to confirm that the system is now in its normal operating mode.
Remote controlled sensor adjustments Due to ever-changing conditions, all alarms require periodic fine-tuning of their sensors. With other alarms, this requires repeated trips back to the dealer.
Smart AutoTesting™ Each time you remotely arm the system, it tests all triggers and sensors. If the hood or trunk is open when you remotely arm, the system will immediately alert you of the problem by sounding 4 chirps and 4 parking light flashes instead of the usual 2 and 2.
Multiple-event TotalRecall™ The system’s memory records the identity of the last eight activated or malfunctioning triggers and sensors, which allows your installer to instantly track down malfunctions. To identify the triggers and sensors held in the system’s memory, use the following procedure: 1.
High-output MultiSound Medallion™ Siren All the siren electronics are in the system control unit rather than the siren itself. This protects them from heat, dirt and exposure to the elements (other alarm companies’ sirens are far more susceptible to failure).
User-selectable features Your Concept 60 allows you to set many of its features to your own personal preferences. Although the system’s programming capabilities are very extensive, we have made the programming procedures very simple: to make a change, you just flick the PlainView switch a few times.
EXAMPLE 1: Turn off siren sound number 2: You can turn each of the siren’s six different sound patterns on and off as you wish to create you own custom sound (see the Personalized Siren Sounds section on page 20 for more information) To turn off “Sound 2” you’ll note that “Sound 2” is in column 1, row 2 of the Table (on pages 24-25).
5. To exit the program mode, turn the ignition off. You’ll hear 3 chirps to confirm program mode exit. You just made three programming changes in only five steps. Easy, isn’t it? Notice again that in step 3 on the previous page you did not have to re-select column 1.
Table of user-selectable features: 1 chirp = OFF, two chirps = ON..
デバイスClifford 60の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Clifford 60をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはClifford 60の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Clifford 60の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Clifford 60で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Clifford 60を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はClifford 60の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Clifford 60に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちClifford 60デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。