Colemanメーカー9992-647の使用説明書/サービス説明書
ページ先へ移動 of 32
Gas Barbecue Use, Car e & Assembly Manual W ith Grill Lighting Instructions 8400 Series Model No. 9992-647 (LP Gas) ASSEMBLER/INST ALLER: Leave these instructions with the consumer . CONSUMER/USER: Read all instructions and keep in a safe place for future r eference.
2 DANGER • FOR OUTDOOR USE ON L Y . NEVER operate grill in enclosed areas, as this could lead to gas accumulating from a leak, causing an e xplosion or a carbon monoxide buildup which could result in injur y or death. DO NO T use in garages, breez ewa ys, sheds or any enclosed area.
3 • Installation must conf or m with local codes or , in the absence of local codes, with either the National Fuel Gas Code , ANSI Z223.1 (USA), Natur al Gas and Propane Installation Code, CSA B149.1 (Canada), or Propane Stor age and Handling Code, CSA B149.
4 Longer detachable po wer-supply cords or extension cords m ust be used with care. The marked electrical rating of the cord set or e xtension cord must be at least as great as the electrical rating of the appliance. If the appliance is of the grounded type , the e xtension cord should be a grounding-type 3-wire cord.
5 DANGER • DO NO T inser t any f oreign objects into the valve outlet. Y ou ma y damage the valve . A damaged valv e can cause a leak, which could result in e xplosion, fire, sev ere personal injur y or death.
6 W ARNING Handle a full cylinder with care. Gas is under high pressure . DANGER • NEVER store a spare L.P . gas supply cylinder under the grill body or inside the grill enclosure or in the vicinity of any heat producing appliance (Fig. 3). • NEVER fill the cylinder bey ond 80% full.
7 1 3 4 7 10 9 8 13 6 2 1. Grill Hood 2. Ther mometer 3. Hood Handle 4. Side Bur ners 5. Control Knobs: Side Bur ners 6. Side Shelf 7. Electronic Igniter : Right Main Bur ners and Side Bur ners 8. Drip T ra ys 9. Car t with Doors 10. Conv ection V ents 11.
Replacement Parts List — 8400 Series 8 Gr ill Rotisser ie Kit (not sho wn) 9992-557 8400 Series Gr ill Rotisserie Kit Gr ill Gas Con v ersion Kit (not sho wn) 9992-237 8400 Series LP to NG Conv ersi.
Replacement Parts List — 8400 Series 9.
Car t Brace Installation 1. Open the left grill door . The two car t braces will be installed at an angle from the car t base to the back side of the compar tment. The top end has a tab with a hole in the center . The bottom end has two protruding tabs.
1. Place a piece of styrof oam from the packaging in the grill to leav e the gr ill hood propped open slightly (Fig. 12). Left Side Shelf Attachment Grill Assembly — 8400 Series Fig. 13 Fig. 14 Fig. 15 Fig. 16 11 Fig. 12 2. The left side shelf attaches to the left side of the grill (Fig.
12 Grill Assembly — 8400 Series 1. Install the burners and caps (Fig. 17 and Fig. 18). Fig. 17 Fig. 18 Fig. 19 2. Install the grate o ver the b ur ners (Fig. 19). Side Burner Installation Fig. 20 Igniter Battery Installation 1. The AA batter y , spring and igniter cap must be installed before using (Fig.
13 Grill Assembly — 8400 Series Fig. 26 1. Inser t the row of six heat tents with the triangle r idges f acing up (Fig. 22). Notice that the heat shields that are welded underneath the heat tents are placed toward the back of the g r ill (Fig. 23). Interior Parts Installation Fig.
14 IMPOR T ANT! T O ENSURE PROPER GAS FLO W , BURNER CONTROL V AL VES MUST BE “OFF” BEFORE OPENING THE GAS CYLINDER V AL VE . W ARNING: During assembl y of the grill and when attaching or replacing the L.
15 1. Check that the cylinder v alve is closed b y tur ning the cylinder knob clockwise to a full stop . 2. Check that all the g r ill burner knobs are in the off position. 3. Remov e the protective caps from the cylinder v alve and coupling nut. NO TE: The coupling nut connects to the large outside threads on the valv e outlet.
16 NA TURAL GAS CONVERSION KIT (not sho wn) P ar t Number Description 9992-237 8400 Series LP to NG Conv ersion Kit Natural Gas Installation — 8400 Series NO TE: This step applies to you only if y ou are conv er ting your 8400 Series grill to use NA TURAL GAS .
17 DANGER T O P REVENT F IRE OR E XPLOSION H AZARD : • NO SMOKING. DO NO T use or per mit sources of ignition in the area while doing a leak test. • P erform leak tests outdoors only . • NEVER perf or m a leak test with fire or flame. Leak T esting • If you detect a leak: 1.
18 1. Regular ly check the b ur ner venturi tubes f or bloc kage from an insect nest. Read “Cleaning the V enturi” in the section titled “Care, Maintenance, and Cleaning”, and also the section titled “T roubleshooting”. 2. Check that all the b ur ner venturi [H] are set ov er the valv e outlets [J] correctly .
19 Lighting Main Burners Lighting Side Burner 1. Push and turn the side bur ner control knob countercloc kwise to the “HIGH” position. (Fig. 39) 2. Immediately press and hold the electronic igniter button (Fig. 39). Y ou will hear a snapping sound.
20 Using the Rotisserie — 8400 Series The grill rotisserie system is designed to cook items from the back using infrared heat. The rotisser ie b ur ner is an infrared type which provides intense searing radiant heat.
21 Lighting the Rotisserie Burner 1. Push and turn on the control knob for the RO TISSERIE BURNER counterclockwise to the “HIGH” position (Fig. 42 and 43). W ait 5 seconds. 2. Press and hold the electronic igniter button (Fig. 43). Y ou w ill hear a snapping sound.
22 Good Bad Y ellow Blue Holes in Bur ner Y ellow Blue Burner Control Setting Tips • The high flame setting is too hot f or direct cooking. The high flame setting is good f or quick searing of meat, then finish cooking on medium or low flame settings .
23 Direct Method: • The heat source is directly below the f ood. • Use f or browning meat or cooking hot dogs and hamburgers, but check f ood frequently . • Use f or skillet and stir-fr y cooking, but limit the amount of oil and heat to be used.
24 REPRESENT A TIVE ILLUSTRA TION Steps For Cleaning V enturi: 1. Remove the cooking gr ates and the heat tents and set aside. 2. Using a 1/4” he x nut driver , remove the self-tapping scre ws holding the front heat shield (Fig. 49 and 50). Set the front heat shield aside.
CAUTION All cleaning and maintenance should be done only when the grill is cool & with the fuel supply tur ned off at the cylinder . If your g r ill is set up f or use with Natural Gas, turn off the gas supply at the system manual shut off v alve.
26 TYPE 1 CONNECTION ILLUSTRA TION Ther mal Sensitive Handwheel 1-5/16" Acme Connection Nipple with Excess Flow V alve Regulator Y OUR NEW GAS GRILL IS EQ UIPPED WITH A TYPE 1 CONNECTION DEVICE WHICH HAS 3 SAFETY FEA TURES (FIG. 55): 1. Proof of gas seal between the connector and the cylinder bef ore gas flow takes place.
Please do not send other correspondence to the address belo w. PRODUCT REGISTRA TION DEP AR TMENT PO BO X 2931 WICHIT A ,KS 67201 A TTN: DEPT 586 IMPOR T ANT! Coleman ¨ Grill W arranty Registration C.
7) Side burner (if applies) 8) Steamer/Fryer/W ar mer (if applies) 9) Side table design 10) Color of the grill (not including stainless steel) 11) Warming racks 12) Dependable igniter 13) Size of the .
Notes 29.
Notes 30.
Notes 31.
The Coleman Company , Inc. • 3600 N. Hydraulic • Wichita, KS 67219 U .S.A. 1-800-356-3612 • TDD: 316-832-8707 9992-033 (2/23/06) © 2006 The Coleman Company , Inc. All r ights reserved. Coleman ® and are registered trademarks of The Coleman Compan y , Inc.
デバイスColeman 9992-647の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Coleman 9992-647をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはColeman 9992-647の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Coleman 9992-647の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Coleman 9992-647で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Coleman 9992-647を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はColeman 9992-647の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Coleman 9992-647に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちColeman 9992-647デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
