CompaqメーカーSMA200の使用説明書/サービス説明書
ページ先へ移動 of 42
TECHNIC A L US ER M A NU A L F OR: smartCore Express SMA200 Nordstrasse 11/F CH - 4542 Luterbach Tel.: ++41 (0)32 681 58 00 Fax: ++41 (0)32 681 58 01 Email: support@digitallogic.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 2 For internal use only: File: SMA200_TechMa nual_V1.0.doc Path: R:HANDBUCHs martSMA200S MA200_TechManu al_V1.0.doc COPYRIGHT 2008 BY D IGITAL -LOGIC A G This publication is protected by copyright and all rights are reserve d.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 3 Table of Content s 1. P REFACE ........... ......................................... ........................................ ......................................... ................ 4 1.1. Trademark s ......
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 4 1. P REF A CE The inf ormation contained in th is manual has bee n carefull y ch ecked and is be lieved to be accur ate; it is subject to change without notice. Product advances m ean that s ome specificatio ns m ay ha ve ch anged.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 5 1.5. Recycling Infor mation All com ponents within this product f ulfill th e requirem ents of the RoHS (Restricti on of Hazardous Substance s Directive). The pro duct is soldered with a lead free pro cess. 1.6.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 6 1.8. Explanation of Symbols CE Conformity This symbol indicates that the product described in this manual is in complian ce with all applied CE stan dards. Caution, Electr ic Shock! This symbol and title warn of hazards due to electrical shocks (> 60V) when touching products or parts of them.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 7 1.9. Applicable Doc uments and Standard s The following publications are used i n conjunction with this manual. W hen any of the ref erenced specifications are s uperseded by an a pproved r evision, that revision shall app ly.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 8 Sm art Battery Data Specifi cation Revision 1.1, December 11, 1998. www.sbs-forum .org System Management Bus (SMBus) Spec ification Vers ion 2.0, August 3, 2000 Cop y r ight © 1994, 1 995, 1998, 2000 Duracell, Inc.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 9 RoHS is often refer red to as the "lead-f ree" directive b ut it restricts the use of the following su bstances: Lead Mercur y Cadm ium Chrom ium VI PBB a nd PBDE The m aximum allowable concentrat ion of any of the above m entioned substances is 0.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 10 1.12. Swiss Qualit y 100% Made in Switzerlan d DIGIT AL-LOGIC is a m ember of "Swiss-Labe l" T his product was not manuf actured by empl.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 11 2. O VERVIEW 2.1. Standard Feat ures The sm artCoreExpress is an electrical and m echanical def inition f or a CO M or C omputer on Modul e (miniaturized PC system), based on Intel's ATOM chip unit incor porating the m ajor ele m ents of a PC compatible com puter.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 12 2.2. Technical Speci fications CPU Specification CoreDuo / Celero n M Intel Atom 510 1.10GHz with 0.5 MB L2-cache Intel Atom 530 1.60GHz with 0.5 MB L2-cache Clock 1.1 or 1.6GHz 1 st Level Cache 2x 32kB y te 2 nd Level Cache 0.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 13 Intel US15W Specification PCIe BUS 2x x1 Lane EIDE BUS 1x Ultra P-ATA 100 SATA BUS - USB V2.0 8 channel USB APIC INTEL I/O APIC SMB V2.0 SMBus c ontroller FWH FirmW are Hub for BIOS devices LPC Serialized BUS ( no ISA) used for externa l SuperI/O Sound AC97 2.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 14 Operating Environm ent Specification Relative Hum idity 5-90% non-con densing Vibration 5 to 2000 Hz Shock 10 G Operating Tem perature Standard: t.b.d. (depe nds on the CPU an d the cooling c oncept) Extended Range: t .
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 15 3. D IMENSIONS & D I A GR A MS 3.1. Block Diagram Temp . Sensor Intel Atom Processor CPU (power suppl y) Power Management Microcontroller FSB 1 GB DDR2 RA.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 16 Design IN w ith the smartModule Attention! W hen using an act ive/passive heatsink that is not from DLAG, be ver y careful! The maximum dep th t he screw s can g o into the prod uct is 3mm o r th e module w ill be destroyed! 3.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 17 3.3. Connector Plac ement & Pin Definition o n the Carrier Board View of the T op Side (mountin g side) of the smartCoreE xpress PCB: d=2.2/D=4.5 3.6mm A1 A2 A3 ... B1 A110 B110 0.5 0.3 1.8 1.6 0.4 d=1.0 d=1.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 18 3.4. Photo of the To p Side of the PCB Pin 1 65mm 58mm.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 19 3.5. Dimensions of t he Carrier Boar d Connector SMX-CON8: Standard Height: 5.0mm (Available alternative: 8. 0mm) DLAG Part Nr: 807138 AMP/T y co: 8-6318491-6 (Com ponents placed below the sm artModule should to tal a maxim um of 2.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 20 4. COM-E XPRESS C ONNECT OR D ESCRIPTION 4.1. Signal Terminol ogy Description s Signal Description PU Internally im plemented pull up resistor PD Internally im plemented pull down resistor I/O 3.3V Bi-directional sig nal 3.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 21 4.2. smartCoreEx press Connector Pinout BUS on the smartCo reExpress – Conn ectors A / B: Pins 1-55 Pin Signal BUS Type Remarks Pin Signal BUS T ype Remarks.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 22 BUS on the smartCo reExpress – Conn ectors A / B: Pins 56-110 Pin Signal BUS T ype Remarks Pin Sign al BUS Type Remarks A56 SMB_CLK SMB 3 .3V bidir B56 SPI_MISO SPI 3.3V Bidir. A57 SMB_DAT SMB 3 .3V bidir B57 SPI_MOSI SPI 3.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 23 5. S IGN A L D ESCRIPTIONS OF THE SM A R T C ORE E XPRESS 5.1. Wire Design for Typical Impedances 5.2. Matching of the Differential Pair s.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 24 5.3. Placing an A C Coupling Capac itor on each PCIe-TX In the sm artCoreExpress module, al l PCI-TX pairs alre ady include the series AC capacitors.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 25 5.4. smartCoreEx press Signal Groups 5.4.1. PCI-Express Signal BUS T ype Descript ion On Modu le Termination Ext. Ter- mination Needed Max. Length in mm Ohm Match ed Length in mm PCIe_Tx [0-4] +/- PCIe Dif Out Transm itter 2.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 26 5.4.2. SDVO Signal BU S T ype Description On Modu le Termination Ext. Ter- mination Needed Max. Length in mm Ohm Match ed Length in mm SDVO_CTRLCLK SDVO DDC signal PU 4.7k to 3.3V 55 SDVO_CTRLDAT SDVO DDC signal PU 4.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 27 5.4.3. LVDS Signal BUS Type Description On Modu le Termination Ext. Ter- mination Needed Max. Length in mm Ohm Match ed Length in mm LVDS_DDCCL K LVDS 3.3V DDC signal PU 10k to 3.3V - 150 55 LVDS_DDCDAT LVDS 3.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 28 5.4.4. USB Signal BUS T ype Descript ion On Modu le Termination Ext. Ter- mination Needed Max. Length in mm Ohm Match ed Length in mm USB_[0..7] +/- USB Dif Diff erential USB d ata sign al pair - - 300 100 0.2 USB_OC[0.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 29 5.4.5. Parallel ATA Signal BUS Type Description On Modu le Terminatio n Ext. Ter- mination Needed Max. Length in mm Ohm Match ed Length in mm PATA_D[15..0] CMOS 5V I/O IDE data signals Series 33 - 100 55 - PATA_A[0.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 30 5.4.6. LPC BUS Signal BUS T ype Description On Modu le Termination Ext. Ter- mination Needed Max. Length in mm Ohm Match ed Length in mm LPC_FRAME# CMO S 3.3V Out Connect to the LPC device - - 100 55 - LPC_AD[3.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 31 5.4.7. SMBus Signal BUS T ype Description On Modu le Termination Ext. Ter- mination Needed Max. Length in mm Ohm Match ed Length in mm SMB_ALERT # CMOS 3.3V In Connect to the SMB device PU 10k to 3.3V - 200 55 - SMB_DATA CMOS 3.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 32 5.4.8. HDA A udio Interface Signal BUS T ype D escription On Modu le Termination Ext. Ter- mination Needed Max. Length in mm Ohm Match ed Length in mm HDA_DOCKEN# CMOS 3.3V Out HAD dock enable. This signal contro ls the external HD aud io docking isolation logic.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 33 5.4.9. SD / SDIO Interfac e Signal B US T ype Description On Modu le Termination Ext. Ter- mination Needed Max. Length in mm Ohm Match ed Length in mm SD0_CD# CMOS 3.3V Out Connect to an SDIO device or card. PU 10k to 3.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 34 5.4.10. SPI BUS Signal BUS T ype Description On Modu le Termination Ext. Ter- mination Needed Max. Length in mm Ohm Match ed Length in mm SPI_MISO CMOS 3.3V In Connect to the SPI device. - 150 55 - SPI_MOSI CMOS 3.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 35 5.4.11. SATA Interface (Option) Signal BUS Type Description On Modu le Termination Ext. Ter- mination Needed Max. Length in mm Ohm Match ed Length in mm SATA_Tx[0..3] SATA Dif SATA transm itter pair Series 10nF 100 100 - SATA_Rx[0.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 36 5.4.12. GLAN Signal B US Type Description On Modu le Termination Ext. Ter- mination Needed Max. Length in mm Ohm Match ed Length in mm GLAN_TX +/- GLAN Dif GLAN T X pair for 1GE - 100nF 250 95 0.5 GLAN_RX +/- GLAN Dif G LAN RX pair for 1GE - 100nF 250 95 0.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 37 5.4.13. CAN / Serial Signal BUS Type Description On Modu le Termination Ext. Ter- mination Needed Max. Length in mm Ohm Match ed Length in mm CAN_TX CMOS 3.3V Out Serial output. Res . - - - - CAN_RX CM OS 3.3V In Serial input.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 38 5.4.14. PM Signal BUS Type Description On Modu le Termination Ext. Ter- mination Needed Max. Length in mm Ohm Match ed Length in mm W AKE# CMOS 3.3V In To wakeup the s ystem, this input m ust be pulled to GND.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 39 5.4.15. Supply Signal BUS Type Description On Modu le Termination Ext. Ter- mination Needed Max. Length in mm Ohm Match ed Length in mm +5Volt P W R In 5V power suppl y input. Switched with th e sus4signal - - - - - +5V Alwa y s P W R In 5V Always av ailable.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 40 6. SM A R T C ORE -E XPRESS C ONNECTOR S PECIFICA TIONS The connector type is equal t o the COMexpress con nector. T his is a 220 pin, s urface-m ounted connec tor with 0.5mm pitch. Parameter C ondition Specification Contact Copper allo y Material Housing Therm oplast molded compound LC P Current 0.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 41 7. SM A R T C ORE -E XPRESS VERSUS COM EXPRESS The smartCoreExpres s s upports sm all f ootprints and espec ially m obile ap plications. It is pow ered b y the modern Intel Atom CPU technolog y. To select the correc t modul e, this chapter com pares the different PCIe-based module concepts.
DIGITAL-LOGIC AG SM A 200 Man ual V1.0 42 8. I NDEX A AC Coupling Capac itor ............................................... 24 B Block Diagram ............................................................ 15 BUS .......................................
デバイスCompaq SMA200の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Compaq SMA200をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCompaq SMA200の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Compaq SMA200の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Compaq SMA200で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Compaq SMA200を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCompaq SMA200の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Compaq SMA200に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCompaq SMA200デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。