Creativeメーカーv.92 Externalの使用説明書/サービス説明書
ページ先へ移動 of 35
v.92 External.
Copyright Information Modem Blaster V .92, External DE5621 Information in this document is subject to change without notice and does not represent a commitment on the part of Creativ e T e chnology Ltd.
i Contents Introduction Before Y ou Be gin ............................................................................................................... .... vii Recording Model and Serial Numbers ....................................................
ii Uninstalling Dri vers in W indows 95 .................................................................................. 2-12 Uninstalling Dri vers in W indows 98/ME .......................................................................... 2-12 Uninstalling Dri vers in W indows NT 4.
Introduction iv Intr oduction W elcome to Modem Blaster! W orld. Y our ne w modem allows you to f ax documents, transfer data and access online information easily from your computer .
Introduction v Answ ering Machine Modem Blaster functions as an answering machine with multiple mail boxes. Remote users can leav e messages in your mail box, and you can play back these messages at any time.
vi Intr oduction Modem On Hold This feature allo ws you to answer an incoming call by placing your Modem Blaster on hold. Check with your local Internet Service Provider on whether this feature is supported in your area. PCM-Upstream This feature enhances your Modem Blaster’ s data upload speed from 33.
Introduction vii Befor e Y ou Begin This section provides information you should kno w about before using this manual. ❑ Recording Model and Serial Numbers ❑ Checking System Requirements ❑ Document Con ventions Recording Model and Serial Numbers Y our modem has a model number and a serial number .
viii Intr oduction Document Conv entions This manual uses the following con ventions to help you locate and identify the information that you need. T able i: Document con ventions T ext Element Use This notepad icon indicates information that is of particular importance and should be considered before continuing.
Installing the Modem 1-1 1 Installing the Modem This chapter guides you through the process of setting up your modem. It is organized as follo ws: ❑ On Y our Modem ❑ Setting up the Modem ❑ Connecting T elephone Line and Phone Set On Y our Modem This section describes the jacks and connectors of the modem.
1-2 Installing the Modem Setting up the Modem 1. Switch off your system and unplug the po wer cord from the wall outlet. 2. Connect the Power adapter and the RS232 cable to the modem as sho wn in Figure 1-1. 3. Connect the Power adapter to a po wer outlet and the RS232 cable to the computer’ s serial port.
Installing the Modem 1-3 Connecting T elephone Line and Phone Set 1. Locate the most con venient telephone wall outlet. If a phone is already connected to it, unplug the telephone cable from the wall outlet. 2. Connect the telephone cable from the phone set to the Phone jack of the modem, as shown in Figure 1-1.
Installing Software 2-1 2 Installing Softwar e This chapter provides instructions to install the modem dri vers in W indows. It also sho ws you ho w to test your installation and uninstall the modem. T o access Modem On Hold functions, you must install NetW aiting.
Installing Software 2-2 After connecting your modem, if you see the Add New Hardwar e Wizard dialog box, click the Cancel button. Proceed with the dri ver installation for your OS. Installing Driv ers in Windows 95 1. Switch on your computer system and then insert the Installation CD into the CD-R OM driv e.
2-3 Installing Softwar e 5. When a dialog box similar to Figure 2-2 appears, click the Next but t on . 6. When a dialog box similar to Figure 2-3 appears, select your location and click the Next button.
Installing Software 2-4 7. When a dialog box similar to Figure 2-4 appears, click the Finish button to complete the installation. 8. Restart your computer system. Installing Driv ers in Windows 98/ME 1. Switch on your computer system and then insert the Installation CD into the CD-R OM driv e.
2-5 Installing Softwar e 6. When a dialog box similar to Figure 2-6 appears, click the Bro wse button and locate the file mohconf ig.exe in E:MOHWin98Conf ig (where E: is your CD-R OM drive). For W indows ME, locate the f ile mohconf ig.exe in E:MOHWinMEConf ig.
Installing Software 2-6 4. When a dialog box similar to Figure 2-8 appears, make sure Don’t detect my modem, I will select it from a list is unselected, and then click the Next button. 5. When a dialog box similar to Figure 2-9 appears, click the Next button.
2-7 Installing Softwar e 6. When a dialog box similar to Figure 2-10 appears, click the Finish b utton to complete the installation. 7. Restart your computer system. Installing Driv ers in Windows 2000 1. Switch on your computer system and then insert the Installation CD into the CD-R OM driv e.
Installing Software 2-8 5. When a dialog box similar to Figure 2-12 appears, click the Ye s button. 6. Click Start -> Run 7. When a dialog box similar to Figure 2-13 appears, click the Browse b utton and locate the file Setup.exe in E:MOHWin2kSdk (where E: is your CD-R OM drive).
2-9 Installing Softwar e 12. When a dialog box similar to Figure 2-15 appears, click the Enable MOH but t on . 13. Click the OK button to complete the installation. 14. Restart your computer system. T esting the installation in Windows 95 1. Click Start -> Settings -> Control Panel .
Installing Software 2-10 5. Click the More Inf o button to display the response status of your modem. Y ou should see a dialog box similar to Figure 2-16. If your modem is not responding, it may be due to a conflict between the modem and another peripheral de vice.
2-11 Installing Softwar e 5. Click the More Inf o button to display the response status of your modem. Y ou should see a dialog box similar to Figure 2-17. If your modem is not responding, it may be due to a conflict between the modem and another peripheral device.
Installing Software 2-12 4. Click the Query Modem button to display the response status of your modem. Y ou should see a dialog box similar to Figure 2-17. If your modem is not responding, it may be due to a conflict between the modem and another peripheral de vice.
2-13 Installing Softwar e 4. Click the OK button to close the dialog box. 5. Shut down your computer and then remo ve the modem. Uninstalling Driv ers in Windows NT 4.0 1. Click Start -> Settings -> Control Panel . 2. In the Control Panel windo w , double-click the Modems icon.
Installing Software 2-14 2. When a dialog box similar to Figure 2-20 appears, click the Bro wse but t o n. For W indows 98, locate the f ile Setup.exe in E:MOHWin98Netwaiting (where E: is your CD-R OM drive). For W indows 2000, locate the f ile Setup.
General Specifications A-1 A General Specifications General Featur es ❑ Auto Fallback ❑ AT C o m m a n d s ❑ Caller ID ❑ Data/Fax/V oice ❑ V .80 for H.324 and H.323 ❑ Plug & Play ❑ High throughput V irtual UAR T , DTE rate up to 1 15,200 bps ❑ Signal Quality Monitoring and Auto Retrain Data Featur es ❑ V .
General Specifications A-2 ❑ Compatible with the following data modem standards: • V .34, V .32bis and V .22bis • V .42 LAPM error correction • V .42bis data compression •V . 4 4 ❑ Compression, line control, and error control are implemented in the hardware.
Troubleshooting B-1 B T r oubleshooting This appendix provides some tips and strategies for resolving some of the problems you might encounter while installing or using your modem. Pr oblems Encounter ed The modem fails to accept commands to dial or to answer a call.
Troubleshooting B-2 There is inter ference on the telephone line that is connected to the modem. Cause It might be due to interference from a power source. monitor , printer , or other computer cables. Solution T ry moving the telephone line away from an y power source, monitor , printer, and other computer cables.
B-3 T roubleshooting Y ou experience poor sound quality when using communications software. Cause The Unimodem V file required b y some 32-bit sound and communications software may be missing. This file is normally installed by W indows 95 Solution T ry to install the Unimodem V file as follo ws: 1.
Troubleshooting B-4 Resolving Hardwar e Conflicts Hardware conflicts may occur when two or more peripheral de vices are set to use the same I/O address, IRQ line or DMA channel. This section provides w ays to resolve hardware conflicts in W indows 95/98.
B-5 T roubleshooting Modem Blaster works well with many of the popular software titles on the shelves today including “Super V oice”. Make sure that the communication software is compatible with the Conexant(formerly known as Rockwell) chipset.
W arranty Inf ormation CREA TIVE (“the manufacturer”) warrants that equipment furnished will be free from defects in material and workmanship for a period of one (1) year from the confirmed date of purchase of the product ne w from the retail location.
7 HFKQLFDO6XSSRUW 3URGXFW5HWXUQ V isit our online help websites for help with installation, answers to frequently asked questions, or troubleshoo ting tips. Our website s hold a wealth of inform ation as well as up- to-the-minute software and driver upgrades.
デバイスCreative v.92 Externalの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Creative v.92 Externalをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCreative v.92 Externalの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Creative v.92 Externalの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Creative v.92 Externalで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Creative v.92 Externalを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCreative v.92 Externalの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Creative v.92 Externalに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCreative v.92 Externalデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
