Crestron electronicメーカーAV2の使用説明書/サービス説明書
ページ先へ移動 of 36
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System Operations Guide.
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, pr oduct names and tradem arks are the proper ty of their respective owners.
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System Contents 2-Series Integrated Dual Bus Control System: AV2 & PRO2 1 Introduc tion ..................................................................................................
.
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System 2-Series Integrated Dual Bus Control System: AV2 & PRO2 2-Series Integrated Dual Bus Control System: AV2 & PRO2 Introduction.
2-Series Integrated Dual Bus Control System Crestron AV2 & PRO2 cards (expansion cage option required for AV2). At a blazi ng 300 Mbps, the Z-Bus supports Fast Ethernet wit h future support for other emergi ng technologies.
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System Front Panel Control (PRO2 only) The PRO2 includes a programm able front control panel with LCD display and control port status indicators.
2-Series Integrated Dual Bus Control System Crestron AV2 & PRO2 AV2 & PRO2 Specifications (Continued) SPECIFICATION DETAILS Enclosure Black metal, 2U 19” rack-mountable (rack ears included) Dimensions Height 3.47 in (8.82 cm) Width 19.00 in (48.
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System Physical Description This section provides inform ation on the connecti ons, controls and indicators available on your AV2 & PRO2.
2-Series Integrated Dual Bus Control System Crestron AV2 & PRO2 AV2 & PRO2 Overall Dimensions 11 10 9 8 7 6 5 4 3 1 12 2 9.69 in (24.61 cm) 17.03 in (43.25 c m) 3.47 in (8.82 cm ) 13 1 14 15 16 17 18 19 6 • 2-Series Integrated Dual Bus Contro l Syst em: AV2 & PRO2 Operations Guide – DOC.
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System Connectors, Controls & Indicators # CONNECTORS 1 , CONTROLS & INDICATORS DESCRIPTION 1 COMPUTER FRONT PAN EL REAR PANEL DB9F connectors (one on front panel and one on rear) are used when programming w ith a PC.
2-Series Integrated Dual Bus Control System Crestron AV2 & PRO2 Connectors, Controls & Indicators (Continued) # CONNECTORS 1 , CONTROLS & INDICATORS DESCRIPTION 14 COM (A – F) 5, 6, 7 COM F COM A (6) DB9 male, bidirectional RS-232/422/485 ports.
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System 5. The pinout of each 9-pin port is non-sta ndard; it contains RS-422 pins in addition to RS-232. This may result in a conflict with some equipm ent and therefore all nine pins should not be used.
2-Series Integrated Dual Bus Control System Crestron AV2 & PRO2 Setup Network Wiring When wiring the network, consider the following: • Use Crestron Certified Wire. • Use Crestron power supplies for Crest ron equipment. • Provide sufficient power to the system.
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System ambient temperature of the rack environm en t may be greater than the room ambient temperature. C ontact with therm al insulating m aterials shoul d be avoided on all sides of the unit.
2-Series Integrated Dual Bus Control System Crestron AV2 & PRO2 bussing strips are constructed wi th four termi nal block positions and m ay be trimm ed to size for various appli cations or different devices. One strip is suppl ied for each 8-position terminal block.
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System Connect the Device Make the necessary connectio ns as called out in the illu stration that follows this paragraph. Refer to “Network Wiring” on page 10 before attaching the 4-posit ion terminal block connector.
2-Series Integrated Dual Bus Control System Crestron AV2 & PRO2 Programming Software Have a question or comment about Crestron software? Answers to frequently asked questions (FAQs) can be vi ewed in the Online Help section of the Crestron website .
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System • To incorporate the AV2 or PRO2 into the system, drag the AV2 or PRO2 from the Control Systems folder of the Device Library and drop it in the System Views.
2-Series Integrated Dual Bus Control System Crestron AV2 & PRO2 Uploading and Upgrading Crestron recomme nds using the latest pr ogramm ing software and that each device contains the latest firmware to take advantage of the m ost recently released features.
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System • Use the Address Book in the Crestron Toolbox to create an ent ry for the AV2 or PRO2 with the AV2’s or PRO2’s TCP/IP comm unication parameters. • Display the “Syst em Info” window (cli ck the icon) and select the AV2 or PRO2 entry.
2-Series Integrated Dual Bus Control System Crestron AV2 & PRO2 Operation Crestron 2-Series Control Systems are the brai n of a comple te integrated audio/visual or automation solution, serving as the cen tral processor and I/O interface.
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System Menu Function Buttons PANEL NOTE: If the unit does not have a loaded program with front panel screens defined, the PANEL menu functi on does not appear on the Main Menu.
2-Series Integrated Dual Bus Control System Crestron AV2 & PRO2 be too long to be displaye d across the top line of the LCD screen; use << and >> to scroll left and right respectively or exam ine them through Crest ron Toolbox. Users may wish to periodically save the error log to a file.
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System “Front Panel Password” Window NOTE : “Front Panel Password” window fro m Crestron Toolbox version 1.02.29 or later. 5. To change the current password, use the drop down list s to select the four numbers for the new password, then cli ck the Change button.
2-Series Integrated Dual Bus Control System Crestron AV2 & PRO2 Time Set Submenu COM This button allows the user to monitor th e transm ission and reception traffic on every COM-type device and card that is act ive in the SIMPL Windows program that i s loaded into the 2 -Series control system.
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System Problem Solving Problems m ay occur with the 2-Series int egrated dual bus control system itself or there may be serial comm unication difficultie s with other devices connected to the control system .
2-Series Integrated Dual Bus Control System Crestron AV2 & PRO2 AV2 & PRO2 Troubleshooting (Continued) TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION A/V system device does not respond. IRP2 or serial port not placed properly. Verify placement of IRP2 (hold phosphor card under IRP2 while pressing button) and tighten serial cables.
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System top line of the LCD screen provides the C OM-type device or card and its port. In t he sample shown below, the first active p ort in the system is the built-in card, port A. The bottom line of the LCD screen provides com mands.
2-Series Integrated Dual Bus Control System Crestron AV2 & PRO2 NOTE: Any of the six-menu function bu ttons toggles the “freeze” state. NOTE: The buffer recycles data even when in the “freeze” state. When the screen is unfrozen, the display jum ps to the end of the buffer.
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System Strip and Tin Wire When daisy-chaining Cresnet units, st rip the ends of the wires carefully t o avoid nicking the conductors. Twist toget her the ends of the wires that share a pin on the network connector, and tin the twis ted connection.
2-Series Integrated Dual Bus Control System Crestron AV2 & PRO2 Software License Agreement This License Agreement (“Agreement”) is a legal contract be tween you (either an individual or a single business entity) and Crestron Electronics, Inc.
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System If You are a business or organization, You agree that upon reque st from Crestron or its author ized agent, You will within thirty (.
2-Series Integrated Dual Bus Control System Crestron AV2 & PRO2 Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandi se may be returned for credi t, exchange, or service without pri or authorization from CRESTR ON. To obtain warranty service for CR ESTRON products, contact an authorized CRESTRON dealer.
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System Operations Guide – DOC. 5957B 2-Series Integr ated Dual Bus Control System: AV2 & PRO2 • 31 This page is intention ally left blank.
Crestron Electronics, Inc. Operations Guide – DOC. 5957B 15 Volvo Drive Rockleigh, NJ 07647 (2002056) Tel: 888.CRESTRON 06.06 Fax: 201.767.7576 Specifications subject to www.
デバイスCrestron electronic AV2の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Crestron electronic AV2をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCrestron electronic AV2の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Crestron electronic AV2の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Crestron electronic AV2で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Crestron electronic AV2を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCrestron electronic AV2の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Crestron electronic AV2に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCrestron electronic AV2デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。