Cub Cadetメーカー5234Dの使用説明書/サービス説明書
ページ先へ移動 of 48
CUB CADET LLC P .O . BO X 361131 CLEVELAND , OHIO 4 4136-0019 [ www .cubcadet.com ] IMPORTANT: READ SAFETY RU LES AND INSTRUCTIONS CAR EFULLY Warning : This unit is equipped wi th an internal combu st.
2 TABLE OF CONTENTS TO THE OWNER ............ ... .... ... ... ... ............. ... .... ... ... ............. ... .... ... ... ............. ... ... .... ... ........ .. 2 CALLING SERV ICE INFORMATION ........... ................ ................. .
3 www.cubcadet.com CUB CADET LLC P. O. BOX 361131 CLEVELA ND, OH 4 4136 DEALER LOCATOR PHONE NUMBER: 877-282-8684 Model Number Mfg. Date XXXXXXXXXXX XXXXXXXXXX RECOR DING MODEL AND SERIAL NUMBER INFORMATION Product identi ficat ion plates are provided for majo r comp onents of your tractor.
4 IMPOR T ANT SAFE OPERA TION PRA CTICES W ARNING: THIS SYMBOL POINTS OUT IMPORT ANT SAFETY INSTRUCTIONS W HICH, IF NOT FOLLOWED, COULD ENDANGER THE PERSONAL SAFETY AND/OR PROPERTY OF YOURSELF AND OTHERS. READ AND FOLLOW ALL INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE YOUR UNIT.
5 • Disengage all attachment clut ches, thoroughly depress the brake pedal and shift into neutral before atte mpting to start the engine. • Your mower is design ed to cut normal residential grass of a he ight no more than 10”. Do not attempt to mow t hrough unusually tall, dry grass (e.
6 3. CHILDREN • Tragic accidents can occur if the operato r is not alert to the pr esence of children. Children ar e often attracte d to the machine. Never assume children will remain wher e you last saw them. • Keep children out of the mowing area a nd in watchful care of an adult other tha n the operator.
7 • Keep all nuts, bolts and scr ews tight to be sure the equipm ent is in safe w orking cond ition. • Never tamper with safety devices. Check their proper operat ion regularly. • After striking a foreig n object, stop the engine, and thoroughly inspec t the mower for any damage.
8 DIE OUTLINE DOES NOT P RINT WEIGHT MAY NEED TO BE ADDED TO THE TRACTOR. REFER TO TRACTOR OPERATOR’S MANUAL FOR DETAILS . WHEN ADDING FRONT AND / OR REA R MOUNTED ATTACHMENTS, COUN TER SAFETY LABEL.
9 O. N. M. L. K. SECTION 1: CONTR OLS AND FEA TURES Figure 1 A. B. C. D. E. F. J. Steering Wheel PTO Swit c h Throttle Hand le Ignition Switch Brake Pedal Reverse Ped al PTO Reverse Overri de Switch * Steering Wheel, Seat, and ROPS Transparent for Clar ity G.
10 NOTE: References to LEFT and RIGHT indicate that side of t he tractor when facing forwar d while seated in th e drivers seat. Reference t o FRONT indicates the grille end of the tractor; to REAR, the tow plate en d.
11 H. Hand Holds Hand holds are built into both the left and right ha nd fender covers. The ha ndles ca n be u sed to assist in mounting and dismou nting the tractor. J. T ransmission 4WD Shift Le ver The 4WD shift lever is located on the right fender.
12 T . Diffe rential Lock Pedal Figure 8 Located at the fro nt of the left running board, th e differential lock pedal engag es the transmission differential lock. The differenti al lock is used to gain additiona l trac- tion when ope rating the tractor on wet or loos e soil.
13 W . Instrument P anel Figure 1 1 1. Fuel Gauge The fuel ga uge monitors, at 20 seco nd intervals, the fuel level in the fuel tank. The needle pointing to the right indicate s a full tank. The ig nition sw itch must be in the ON position to read the fuel gauge.
14 SECTION 2: OPERA TION ROLLOVER PROTECTIVE STRUCTURE (R OPS) This tractor is equipp ed with a Rollover Protection Structure (ROPS) and seat belts. When used together the y are effective in reducing in juries to the operator in th e event of an accidental tractor rollover.
15 • Do not smoke while refueling the tr actor. • Do not fill the fuel t ank when the engine is running or wh ile the eng ine is hot. • The fuel fill cap is loca ted on the fender to the left of the seat. Unscr ew the fuel cap and fill tank from an approved co ntainer.
16 COLD WEATHER STARTING (BELOW 14° F) Move the thr ottle handle to appr oximately the "FAST" throttle position, then follow the normal engine start i ng instructions above. NOTE: An optional e ngine coolant heater is available from your Cub Cadet de aler.
17 USING THE FORWARD AND REVERSE PEDALS The hydros tatic transmiss ion provide s constantly variable ground sp eeds within the speed rating of each transm ission range. Th e tractor spe ed is controlled by the forw ard and reverse pedals on the front of the right running board.
18 DRIVING ON SLOPES W ARNING: Do not ope rate on inclines with a slope i n excess of 15 degrees ( a rise of approximate ly 2-1/2 feet every 10 feet). Th e tractor c ould overt urn and cause serious inj ury . IMPORTANT: Always shif t the transmission into the LOW speed range BEFORE begin ning the climb or descen t of any slop e.
19 USING THE HYDRAULIC LIFT LEVER The hydraulic lift system pr ovides power for raising and positioning thr ee point hitch and belly mounte d equipment. T o raise an attachment using th e hydraulic lift system, t he engine must be running. Generally, an att achment can be lowered with the engine running or off.
20 Hazard Ligh t s Always use the flashing amber h azard lights along with the SMV (Slow Movin g Vehicle) emblem when operating the tractor on, or near, roadways. Also activate the hazard ligh ts when necessary to warn others that the t ractor is being operated in the area.
21 USING THE HITCH PLATE Use only the hitch p late (Refer to Fig ure 22), for towing pull-behind equip ment (carts, trailers, etc.) or dragging loads. Raise the lower links of the thr ee point hitch to their highest pos ition to prev ent interfer ence with the towed equipm en t.
22 SECTION 3: ADJUSTMENTS ADJUSTING THE SEAT For the comfort of the operator, a single lever adjustable se at is provided to set the for e to aft position of the sea t. Adjust the seat to the most comfortable position that allows you to op erate all controls and pe dals.
23 • The length o f the upper hitch lin k is normally determined by the d esign of each implement. To adjust th e upper hi tch link, loosen the lock- ing lever and turn the adjustment t ube as shown in Figure 26. Aft er the appropriate length is attained, tighte n the locking lever.
24 ADJUSTING THE BRAKES The tractor brakes are adjusted at the fact ory and should experience minimal wear if the tractor is operated no rmally. However, all br ake pads are subject to wear and at some point the brake linkage may have t o be adjusted .
25 SECTION 4: MAINTENANCE The service life and reliability of any machine depends upon the ca re it is given. Proper lubrica- tion and main tenance is a vital part of th at care. Using the Lubrication and Maintenance Chart as a guide, mon itor the ho urmeter o n the instru ment panel to ensure t he required maintenance p roce- dures are performed .
26 LUBRICA TION AND MAINTENA NCE CHART (ILLUSTRATION) 1 2 6 6 7 8 9 10 10 12 13 14 15 16 17 17 17 18 4 13 5 5 11 3 5 19 20 21.
27 LUBRICA TION AND MA INTENANCE CHAR T † More often when operating under du sty conditions †† If operated less than 100 hours annu aly Ref. No. Operation to be P erfor med Service In tervals Be.
28 ACCESSING THE ENGINE COMPARTMENT W ARNING: If the tractor has been recently opera ted, engine surfaces (including the radiator ) will be HOT. Allow the engine to cool before open- ing the hood, or use extreme caution to avoid burns when the hood is open .
29 BATTERY REMOVAL W ARNING: Battery posts, terminals and related ac cessories contain lead and lead compounds. Was h hands after handling. The battery is loca ted at the front of th e tractor beneath the ho od. To remove the batter y: • Open the tractor hoo d as described in the previous sub-section.
30 HEAD LIGHT BULB REPLA CEMENT The tractor is equipped with headlights. If one of the bulbs should b urn out, r eplace the bulb as follow s: • Fully raise the hood. • Pull the wire har ness plug from the bulb/socket assembly to unplug the wire harne ss.
31 Accessing the Fuse Center The fuse center is located on the inside right of the dash panel. To access the fuse center, remove the dash panel insert by removing the two screws. See Figure 37. To cover the fuse center, reposition the dash pan el insert in the da sh and secure with the two screws.
32 CHECKING TRAN SMIS SI ON / HYDRAULIC SYSTEM OIL LEVEL Check the hydro transmission /hydraulic system oil level before e ach use. NOTE: Check the oil level only while the engi ne is stopped and the tractor is standing on a level surface.
33 • Remove the old hydrostatic filter by turning it counterclockwise, and immed iately replace with the new filter . Turn the filter clockwise by ha nd until the gaske t contacts the f ilter base ; then tighten th e f ilter an additional 1/2 to 3/4 t urn.
34 Dispose of used oil in an environmen tally safe mann er. If ne cessary, cont act your area EPA office for proper disposal proce- dures and recycling center locations. • Change the hydr o transmission filter as instructed in Changing Hydro Transmission Oil Filter .
35 • To preve nt debris from entering th e front axle housing, clean the area around the o il fill pl ug / di psti ck and the axle drain plug located at the center front of the axle. Refer to Figure 44 and Figure 46. Figure 4 6 • Place a suitable container beneat h the front of the axle hous ing .
36 TIRE MAINTENANCE Check the tire air pr essure after every 50 hours of operation or weekly. Keep the tires inflated to the recommended pressures. Improper inflation will shorten the serv ice life of a tire. See the tire side wall, or the Tire Inflation chart, for p roper inflat ion pressures.
37 TRACTOR STORAGE If your tractor is not going to be operated fo r an extended period of time (thirty days to approxi - mately six mont hs), the tractor shou ld be prepared for storage. St ore the tractor in a dry and protected location. If store d outside, cover the tractor (includ - ing the tires) to protect it from the elements.
38 SECTION 5: ENGINE INFO RMA TION AND MAINTENANCE Daihatsu L.L.C., the California Air Resources Board (CARB) and the United States Environmen tal Protection Agency (U.
39 c. Ignition System •G l o w p l u g d. Exhaust System • Exhaust manifold e. Miscellaneous Items Used in Abo ve Syste ms • V acuum, temperature, position, time sensitive valv es and switches • Electronic controls • Connectors and assemblies • Hoses 2.
40 ENGINE MAINTENANCE W AR NING: Use care whe n servicing any component in th e engine area. If the engine has recently been operated, components will be hot and could cause burns.
41 • Clean the area around the oil filler cap to prevent debris from ente ring the crankcase. See Figure 50. Figure 5 0 • Turn the oil filler cap counterclockwise to unscrew fro m th e valve cover. • SLOWLY pour oil into the crankcase until the oil level reaches the “FULL” mark on the dipstick.
42 • Start the en gine and run for about 5 minutes. Stop the eng ine and check for leaks at t he oil filter and drain plug . • Wait 3 minutes and re-check t he oil level. If needed, add o il to bring the oil level up to the "FULL" mark. W ARNING: Never ov erfill the engine crankcase.
43 • Place a suitable container ben eath the drain plug and remove t he cap from the overflow reservoir. • Turn the drain plug counterclockwise to re- move. Allow as much of the ol d coolant as pos- sible to drain from the system. Coolant is a toxic substance.
44 SERVICING THE FUEL FILTER W ARNING: D o not service the fuel filter when tractor is hot or near a ny source of ignition. Allow the tractor to cool. The tractor is equippe d with an in-line fuel filter located on the rig ht side of the engine. Diesel fuel is a toxic substance.
45 SECTION 6: SPECIFICATIONS Engine Manufact urer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Diahatsu Horsepowe r . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
46 SPECIFICATIONS Hydraulic Lift Syst em Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aux iliary Pump Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
47 SECTION 7: OPTIONAL EQ UIPMENT AND ACCESSORIES When purchasing you r tractor, you probably had it equ ipped for your particular nee ds at that time.
Proper maintenance of your Cub Cade t equipment is the owner’ s responsibility. Follow the instructions i n your owner’s manual for correct lubricants and maintenance schedule.
デバイスCub Cadet 5234Dの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Cub Cadet 5234Dをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCub Cadet 5234Dの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Cub Cadet 5234Dの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Cub Cadet 5234Dで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Cub Cadet 5234Dを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCub Cadet 5234Dの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Cub Cadet 5234Dに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCub Cadet 5234Dデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
