CyberPowerメーカーCPS1500AVRの使用説明書/サービス説明書
ページ先へ移動 of 20
User Manual for: CPS1500A VR UPS TM and PowerPanel Plus Software ADDITIONAL INST ALLATION TIPS CAN BE FOUND A T: www.cyberpowersystems.com/1500F AQs.htm.
T ABLE OF CONTENTS Thank you for purchasing a Power Systems product. T o enjoy all the features and benefits of this Uninterruptible Power System (UPS), please read and follow all installation and operation instructions completely . This UPS is designed to provide guaranteed power protection for connected electronic equipment.
CPS1500A VR Guaranteed Uninterruptible Power System DESCRIPTION 1. Power Switch Can be used as a master on/off switch for equipment connected to the UPS. 2. T est Switch Press this switch to run a self-test. 3. Battery Capacity/ Load Indicator These indicators show a visual indication of the battery charge as well as the unit’s load.
2 INSPECTION The box should contain the following: TM TM (1) PowerPanel Plus Software Disk;(1) PowerPanel Software Disk; (2) Serial Interface Cable (DB-9); (1) T elephone Cable; (1) User Manual; (1) Warranty Registration Card; (1) UPS Unit; (2) Rack mount Brackets; (2) S tands.
CPS1500A VR Guaranteed Uninterruptible Power System 5. Plug the UPS into a 2 pole, 3 wire grounding receptacle (wall outlet). Make sure that the outlet is protected by a fuse or circuit breaker and does not service equipment with large electrical loads (i.
TM POWERP ANEL PLUS SOFTWARE INST ALLA TION GUIDE (Note: Use of the software is optional. The unit will provide surge suppression and battery TM backup without using the software. PowerPanel Plus should be used on the primary computer) FOR WINDOWS 95/98/Me 1.
8. Windows will find new hardware. TM 9. Insert the PowerPanel Plus (Primary) disk into the floppy drive. 10. Follow the on-screen instructions. 11. Once the sof tware has finished installing, remove the floppy disk and restart your computer .
9. Connect the serial interface cable to the UPS and an open serial port on the back of the computer. Y ou must use the serial cable that was provided with the unit. 10. Plug the UPS into and AC outlet, turn the UPS on and start your computer . 11. Click on Start , point to Settings , and then click Control Panel .
TM POWERPANEL PLUS MAIN WINDOW DESCRIPTION 1. Input Volt age - This reading shows the current input voltage of the utility power. The input normally displays in green, but will appear in red if the input voltage is lower than 85v of higher than 150v. 2.
6. Delay between warning messages - User adjustable setting for the delay between the audible alarms that occur during a power failure. 7. UPS Self-test - Allows the user to test the UPS without having to unplug the unit from the wall. When the run button is clicked, the unit will switch to battery power and the unit will beep.
5. Clear - Clears the selected item from the schedule. 6. Add - Adds an item to the schedule. 7. OK - Exits the window. Please note: Y ou must click Add to add the item to the schedule. 8. Turn Off - Select the day/date/time that you want the system to shutdown.
FOR WINDOWS NT 1. Click on Start , point to Settings , then click Control Panel . 2. Double-click the UPS Icon . 3. Remove the checkmark from the box labeled UPS is installed on . Click OK 4. Acknowledge the message that the UPS is in an unknown state and exit to the desktop.
TESTING YOUR UPS SYSTEM Once you have set up your UPS system, you may wish to test it. Make sure that the UPS has been charged for at least 4 hours before testing. T o test the UPS, simply depress the test button located on the front of the unit. The unit will cycle to battery and emit an audible beep.
CAUTION! A battery can present a high risk of short circuit current an electrical shock. T ake the following precautions before replacing the battery: 1. Remove all watches, rings or other metal objects. 2. Only use tools with insulated handles. 3. DO NOT lay tools or other metal parts on top of battery or any battery terminals.
Power On Wiring AVR Using Circuit Alarm Condition Fault Battery Breaker On Off Off Off Set Off Normal On Off Flash Off Set Off AVR - Max. boost 15% of input voltage for output regulation while input voltage is from 8% to 30% under nominal. On Off On Off Set Off AVR - Max.
TROUBLESHOOTING 14 General Model CPS1500A VR Capacity 1500A V (950W) Input Frequency 47Hz - 63Hz Vo ltage Range 85v - 150v UPS- Output Line Conditioning Regulation A VR Max. boost 15% of input voltage for output regu lation while input voltage is from 8% to 30% under nominal A VR Max.
15 Limited Warranty And Power Control Guarantee In purchasing a CPS1500AVR in the United S tates or Canada, the original end user receives a Limited Warranty and CyberPower's Power Control Guarantee from CyberPower Systems (USA), Inc. (for ease of reading, referred to as "CyberPower").
POWER CONTROL GUARANTEE If you are the Initial Purchaser and the Product is still covered by the Limited Warranty, the Power Control Guarantee provides protection f or damage to equipment connected to the Product ("Connected Equipment"), subject to certain terms and limitations.
CONDITIONS COMMON TO THE LIMITED WARRANTY AND THE POWER CONTROL GUARANTEE The Limited Warranty and the Power Control Guarantee are the only and the exclusive express warranty of CyberPower with respect to the Product. This exclusion of other express warranties applies to written and oral express warranties .
FCC Notice This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. The se limits are designed to provide reasonable protection against harmful interference in residential installation.
デバイスCyberPower CPS1500AVRの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
CyberPower CPS1500AVRをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCyberPower CPS1500AVRの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。CyberPower CPS1500AVRの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。CyberPower CPS1500AVRで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
CyberPower CPS1500AVRを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCyberPower CPS1500AVRの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、CyberPower CPS1500AVRに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCyberPower CPS1500AVRデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。