CyberPower SystemsメーカーPower Supply Systemの使用説明書/サービス説明書
ページ先へ移動 of 32
PowerPanel ® Business Edition USER MANUAL Rev. 0.9 2007/10/26 Copyright © 2006-2007 Cyber Power Syst ems, Inc. All rights reserved..
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 1 PowerPanel ® Business Edition USER’S MANUAL PowerPanel ® Business Edition provides power management Services. PowerPanel Business Edition consists of Agent and Slave .
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 2 CONTENT MONITOR THE BATTERY BACKUP STATUS AND VIEW THE BATTERY BACKUP INFORMATIO N [A GENT ONLY] ................................................
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 3 Configure Setti ng s o f E vent Ac ti ons for the Selected Event .......................................... 21 Configure Overall Action Settings .
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 4 MONITOR THE BATTERY BACKUP STATUS AND VIEW THE BATTERY BACKUP INFORMATION [AGENT ONLY] • Bat.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 5 o * Buck : The present input vo ltage of utility powe r is too high. The Battery Backup will decrease ou tput voltage to normal range. o Overload : The present load exceeds th e maximum loa d the Battery Backup can support.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 6 • Status : Displays the present operating status of the Battery B ackup. o Normal : The system status is normal. o * Fault : The s ystem is in fa ult state due to an internal malfunction.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 7 VIEW THE POWER SYSTEM INFORMATION AND CONFIGURE POWER SYSTEM LOCATION [SLAVE O NLY] • Introd.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 8 The Power System Location page lets you configure the power system address and view the connection state of Power System.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 9 CONFIGURE THE BATTERY BACKUP SETTINGS AND PERFORM DIAGNOSTICS [AGENT ONLY] • Configure the B.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 10 o Turn off when utility power fails for minutes : Sets how long the utility pow er is off before tur ning off this outlet. The valid value is 0- 120.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 11 • * Restore power when the batteri es have been charged to a percentage of battery capa city : Sets how much battery capacity must be present for the B attery Backup to restore power.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 12 • The Battery Backup alarm is : If you enable this optio n, the Battery Backup alarm will so und when it switches to battery mode.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 13 The runtime calibration synchronizes th e runtime estimate with the current load and battery capacity. When a runtime calibration initiates, Calibration is initiated event occurs.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 14 CONFIGURE PROTECTED SYSTEM AND VIEW THE SUMMARY • Configure pro tecte d system identificati.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 15 SNMP-TRAP comm unity key : Find thi s setting on Networ k- >Trap Notification page. Ad d a TrapReceiver and ty pe Slave IP and community key to fill the fields.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 16 2. The details of the equipment will be shown in the tex t field of name , location, contact, a nd powered by which outlet. 3. Modif y th e detail s of the equipm ent in tho s e t ext fields .
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 17 CONFIGURE ACTION SETTINGS FOR DIFFERENT EVENTS • Configure Settings of Event Ac tions for Se lected Events from the Event List. • Configure Settings of Even t Actions in the Event List in Quick Setting Mode.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 18 overloaded Battery-test failure The battery-test failed to pr ovide battery power normally. Batteries are not present Batteries are not present; the Battery Backup cannot provide b attery power in this cond ition.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 19 Leaves bypass mode Leaves bypass mode and switch to line mode or ba ttery mode, battery p ower will be used. Battery-test is successful The Battery test was successfu l, battery powe r is normal.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 20 Output is no longer overloaded Output is normal a nd no longer overloaded. Bypass is no longer overloaded Output is no longer overloa ded in bypass mode.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 21 You can configure the actions enabled or disabled in event list. There is only one step to do. Click the top-right Qu ick Setting Mode icon. Then you can enable or disable each setting of even t actions by checking or unchecking the check box.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 22 receivers which are not belong to local users, those notification receivers will not receive the notifica tion.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 23 • Shutdown Sequence : o Initiate a shutdow n sequence for this event : If you enable th is option, the Battery Backup will initia te a shutdown sequence when the event occurs.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 24 o SMTP server requires validati on : If you enable this option, the e- mail will be sen t using the cre denti als you supply. If you enable this option, complete the account and password field.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 25 4. Click the Cancel b utton to cancel ad ding an e-mail receiver. o Remove an e- mail receiver 1. Select the e-mail receiver from the e-mail receivers list a nd click it.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 26 Note: Google®, Google® Talk, and Gmail™ are either registered trademarks or t rademarks of Google® Corporation in the U nited States and/or other cou ntries.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 27 • Runtime : The rema ining runtime of the Battery Backup (minutes). DISPLAY OPTION The display option let you to decide the status records you want to view.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 28 MANAGE SCHEDULED SHUTDOWN AND RESTART SETTINGS [AGENT ONLY] The Schedule page lets you manage your shutdown schedules.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 29 SHUTDOWN SCHEDULE MESSAGES Messages Description The maximum dura tion is 30 days. Modify the Shutdown Time and Reboot Time . A sched ule with duratio n over 30 days is not allowed.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 30 CHANGE THE AUTHENTICA TION USERNAME AND PASSWORD The Authentication page allows you to change the username or the password. The default username and password are "admin".
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 31 CONNECT TO THE SYSTEM FROM REMOTE COMPUTER You can connect to the administrator system from remote computer as following steps. • You need to know the admi nistrator system host IP.
デバイスCyberPower Systems Power Supply Systemの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
CyberPower Systems Power Supply Systemをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCyberPower Systems Power Supply Systemの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。CyberPower Systems Power Supply Systemの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。CyberPower Systems Power Supply Systemで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
CyberPower Systems Power Supply Systemを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCyberPower Systems Power Supply Systemの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、CyberPower Systems Power Supply Systemに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCyberPower Systems Power Supply Systemデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。