D-LinkメーカーDI-704Pの使用説明書/サービス説明書
ページ先へ移動 of 17
Before y ou begin… Make sure that any existing Firewall Software/Devices are d isabled and/or shutdow n before beg inning install ation of y our new D-Link DI-704P Broadband R outer.
First, p lug in the powe r supply as shown. Plug the o ther end of th e power supply into the pow er sou rce. Flip the POWER togg le switch to the ON pos ition . (During a s elf-test pha se, the indicator l ights wil l flash brie fly. At the end of th e self -test, th e M1 indicator l ight will flash co ntinuously to indica te normal ope ration.
Make sure that TCP/IP protocol ha s been installed in your com puter . Next, set the TCP/IP protocol to “Obtain an I P Address automa tically” by doing the following : • Go to Start>Settings .
• Use the “pu ll- down menu” on thi s screen to display the Etherne t card that i s installed in your com puter and connected to the DI- 704P. The IP Address (for th e Ethern et network ada pter) that appears in t his window must be betwe en 192.
Type “ad min” in the “System Passwo rd” fie ld. Click on “Log in ” Click on “Setup ” -5- Configuring the DI-704P with the W eb br owse r.
Click “Change” (Please see sepa rate inst ructions b elow for D SL and Cable u sers.) For DSL user s: Select “ PPP over Ethernet” if y ou are using a PPPoE client to connect to your DSL prov ider (conta ct your DS L prov ider if you a re uncerta in.
For DSL users (con tin ued): Enter th e PPPoE Account and Password that y our ISP ass igned to you. Lea ve t he pas swor d fi eld blan k if you d o n ot wa nt t o cha nge the pas swor d. Input the PPPoE Service Name if your I SP requires i t. Set the Max imum Id le Time.
For Cable U sers: Select “Dynam ic IP Address.” Click “Save.” Enter th e “Host Name ” giv en to you by y our cable p rovider (for exam ple, “@ Hom e.”) For informa tion on conf iguring a back -up dial-u p modem, please s ee the “Configura tion” sect ion of your Use r’s Manual.
To check th e connec tion, op en the web browse r and g o to your fav orite web site. If you are un able to brows e, please do th e following : 1. Refer to Append ix B to check your conne ction. 2. Use “Help” on t he Main Menu. 3. Refer to the troublesho oting section in the use r’s manual.
NOTE: Installing the Pri nt Server softwa re i s only necessary if you p lan to use the Pr int Server function of th e D-Link DI-704P. If you choos e to use the pr int server function , plug the pr inter cable from you r print er into t he printer por t on the DI-704P, i f you have not alre ady done so.
To sele ct the def ault folde r, Click “N ext” Note: It is recommended that you cl ick “Nex t” in th e above window. Howev er, if necessary, Cl ick “Browse” to se lect a n alternat e folde r. When this window is d isplayed, Click “ Finish ,” to comp lete the Setu p.
Select “Yes , I want t o restart my computer.” Click “ OK” After th e compu ter has res tarted, th e Print Server software in stal lation is c omplet e. Note: If you r printer is not installed, go t o START>SETTINGS>PRINTERS . Double C lick on the “Add Print er” icon.
Choose the “Deta ils” tab. (In Windows 2000 or NT, choose the “Ports” tab.) At th e “Add Port” p ull-down m enu, choose “D-Link L PT port (Prin t Server.)” Please m ake sure th e proper prin ter driver is selec ted . Click “Port S ettings.
Type in the “IP add ress” of th e DI- 704P. Click “ OK” In the prev ious window, m ake sure the setting s are correc t. Click “ OK” You have completed config uring your prin ter. Go to START>SETTINGS>CO NTROL P ANEL Double-cl ick the “networ k” icon.
To manually input th e IP Addres s, please do the follow ing: In t h e “TCP/IP Properties” window, under the “I P Address” ta b, Select “Specify an IP address. ” The defau lt IP Address of t his product is 192.168.0.1 Please use 192.1 68.0.
From the desk top, go to Start>Run Type “command” in the box. Click “ OK” The follow ing MS- DOS Prompt window will appea r. Type “ping 192.
Building Networks for People Printed in T ai wan.
デバイスD-Link DI-704Pの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
D-Link DI-704Pをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはD-Link DI-704Pの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。D-Link DI-704Pの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。D-Link DI-704Pで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
D-Link DI-704Pを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はD-Link DI-704Pの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、D-Link DI-704Pに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちD-Link DI-704Pデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
