D-LinkメーカーDP-300Uの使用説明書/サービス説明書
ページ先へ移動 of 152
D-Link DP-300U Fast Ethernet Print Server Manual Rev . 01 (Nov ember , 2007).
i Cont ents Package Contents ...................... ................................................ ................... iv Contents of Package: ... ....................................................... ................... iv System Requirements: .
ii SETUP > LAN Setup ...... .................................................... .................. 24 SETUP > Printer Setup .................... .......................................... ........... 25 ADV ANCED > Advanced LAN .....
iii Adding a Printer ........... ................................................... .................... 123 AppleT alk-enabled or B onjour-enabled Pr inters ................... ............. 125 Setting up AppleT alk or LPR Printing in Mac OS X .
iv Package Co ntents Contents of Package: D-Link D P-300U P rint S erver Manual and W a rranty on CD Printed Quic k Installa tion Gui de If any of the abo ve items are missi ng, plea se contact your resel ler .
1 Introduction The D-Link DP-300U Print Server is print server that con nec ts to your Ethernet/F ast Ethernet network anywhere yo u wish to locate print er services.
2 Because the DP-300U is ve ry portable and i nexpensive compared to a PC-based print server, and P rint Serv er connects to your file ser v ers throug h the netw ork, printer s c a n be dep lo yed to locat io n s of maximum convenienc e to users.
3 External F eatures Port Connectors The DP-300U h as two pa rallel po rts and on e USB p ort located on its b ack panel. The port s are conf igura ble using t he Web Conf iguration Interfa ce or the p rint server’s Telnet int erface. The Pr int Server ’ s Web co nf iguration permits users to configur e settings thro ugh the web browser.
4 Rea r Pa ne l Network Cable Conn ect or The Print Server ’s rear panel featur e s an RJ-45 co nnec t or for co nnec t i on to 10Base-T Etherne t cabling or 100Base-TX Fast Ethern et cabling (whic h should be Ca tegory 5 tw iste d -p air cable).
5 Front Panel LED Ind icato rs The front panel of the print server feature s f ive LED indicators: Power S tea dy green conf ir ms that the Pr int Server is po wer ed ON. Link/A ct S teady green confirms t hat th e Print Server has a good con necti on to the Et hernet or Fast Ethernet network.
6 Setting up the DP-3 00U Inst alling t he Print Serv er W ARNING : Configuration problems ma y result if the Print Server is powered up without first e sta blishing it s network c onnection. Follow this proc edur e to av oid complica tions at the config uration s tage .
7 and flashing operation. Immediately after power-up, al l five of the green LE Ds should illuminate s teadi ly for se veral second s. Then the LPT1, L PT2 and USB L ED indicat ors should light OFF . Irre gularit y of any of the three L E Ds during these LED test s may mean th ere is a problem with th e LEDs themselv es.
8 Getting Started Below is a sampl e networ k u sing the DP-3 00 U. The DP-300U has a bu ilt - in Web-based ma nagement f eature t hat allows u sers to ea sily co nfigure and manage mul ti ple print queu es through TC P/IP . For a list of p r int ers th at are compat i ble with th e DP-300U, ple ase see the Appendix in thi s manual.
9 Using PS-Wizard This chapter will introduce yo u the installation and oper ation of a usef ul software program – PS-Wizard . Auto-Run Instal lation Insert the Inst allati on CD-ROM into your com puter’s CD-ROM drive to init iate the Auto-Run progr am.
10 PS-Wizard To avoid the conflict in yo ur network, you can use PS-Wizard to ch ange the related settin gs of your print ser ver (such as the IP address) after finishing the in stal lation of PS-Wizard on your PC.
11 2. Clic k Next> in the welcome window of InstallShield Wizard . 3. Specif y the de stinat ion locat ion by clicki ng the Browse… button. Otherwis e, leave the default set ting an d click Next> to continue.
12 4. You may enter a new fol der nam e in the Program F older fi el d if you want to change the d efault name . Otherwise, y ou may l eave the defaul t se tting and click Next> to go on the ins tallation.
13 5. The Install Shield Wi zard starts to install the so ftwa re, a nd th e Prog ress bar indicates t he inst allation is proceeding u ntil the following win dow shows up.
14 Using PS-Wizard PS-Wizard , suppo rts fo r Windows 20 00/XP/2003/V is ta, is a simple and useful tool for you eas ily adding a printe r on your computer in order to quickly st art your printing task without any co mplicated configurat ion.
15 Print Server : This fi eld allows yo u to ma nually discover the connect e d pr int server and to do further c onf iguration of the print serv er that is s elected from the list.
16 LAN : Y ou may also to spec ify dyn amic o r s ta tic IP address for you r prin t server . Then click Apply button to implemen t the new se tting. Port Information : This is the main function of the PS-Wizard for you to easily add a pr inter on your computer .
17 The wizard provid es t h ree ways for yo u to se lec t pr inter dr iver : 1. Show current installed drivers: Y ou may select this option, “ Show currently inst alled driver s ”, to chec k i f th e same prin ter driver al ready existe d for us e.
18 printer in the Network Printer Name box and enable this pr inter as the def ault printer by checking the Use this printer a s the defau lt printer for Windows-based programs box. After you did the verifi cation and conf i guratio n in the following window , click Next> to continue.
19 When the following window shows up, yo u may do print test by clicking the Pr int Te s t P a g e to check if you can do printing normally . If yes, click Finish to exi t th e install ation window and now you m a y start your printin g tasks.
20 Using the Web Con figuration Home T o begin managing the DP-3 00U, simply launch the browser (e.g. Internet Explorer 6.0 used in this ma nu al) you have installed on yo ur computer and direct it to the UR L address: dlink-xxxxxx, w her e xxxxxx are the last six digits of DP-300 U’s MAC addre ss.
21 configura tion through five links on the top of this main scr een: Setup , Advanced, Maintenance , Statu s , and Help . Yo u may clic k a desired link from the bar, to display it s s ubmenu and sel ect a desired op ti on listed in t he le ft c olum n, a nd th en the corresponding content will sh ow up in the center column.
22 SETUP > Print Server Setup The Print Server Setup screen allows yo u to modify the Print Server Name and Port Setti ngs , as below show s. D-Link does not reco mmend chan ging these settings unless asked by y our ne twork ad ministrator .
23 Print Server Name In this field, you c an conf igure the ba s ic inform at ion of pr int server . The basic information contains a name of the print s erve r , assigned in Serv er Name box, and a locat ion for t he p rint serv er , assigned in Location ( optional) box.
24 SETUP > LAN Setup The LAN Setup screen allow s you configure the local ne twork settin gs of print server . Please not e that thi s section is optional and you sh ould not need to change a ny of the se ttings here to get print server up and running.
25 SETUP > Printer Setup The Printer Setup screen allows you install the prin ter dr i ver s for the pr i nter current ly conne cted t o your pr int server . Network Pr inter W izard Click Next to do wnload and run a wind ows wizard progra m to in stall a netwo rk printer o nto your compu ter .
26 The above screen is the Ne twork Prin ter Wizard. Click Run , and i f a sec ond window appears as below click Run again. Select th e printer required , and th en click Next to continue.
27 The wizard provides three ways fo r you to select printer driver: 1. Show current installed drivers: Y ou may select this option, “ Show currently inst alled driver s ”, to chec k i f th e same prin ter driver al ready existe d for us e. If not, you may tr y t he next m ethod.
28 2. Select from man ufacturer list : Check this option, “ Select from manufacturer list ”, to manually select your printer from drop-do wn menus by brand and model. Click Nex t> to continue w he n you find a desired driver . If n ot, try t he last wa y ( Have Disk ).
29 3. Have Disk: Click Have Disk to brin g up the following wi nd ow . Insert the manufact ure’s install ation CD -ROM to ins tall the printer dr iver .
30 After selec ting th e printer dr iver , the wizard will ask you to conf irm your selectio n again in the follow ing wind ow . Beside, you are allowed to edit th e name of th e printer in the Networ.
31 When the follo wing wind ow shows up , you may do print test by clicking Print T e st Page to check if yo u c a n do pr i n ting norm ally . I f yes, click OK to cl ose the PS-Wizard dialog box . If yes, t hen click Finish to ex it th e i n st alla tio n win d ow and now y ou may s t art you r printin g tasks.
32.
33 ADVANCED > Advanced LAN The Advanced LAN screen allows yo u to further network sett ing of print server . It is not recommended not to change the settings unless instructed to modify the settin g b y your network administrator . The Advanced LAN screen cont ains th ese fields: TCP/IP , Microsof t Network, and AppleT al k .
34 TCP/IP This fiel d contains fo ur op tions th at all o w yo u to con figur e th e TCP/IP sett ing : DNS Server Address , UPn P , Mac Bonjour/Rendezvous , and Second HTTP Port . UPnP : This opti on allows you to en able or disable UP nP func tion.
35 ADVANCED > User Access The User Access screen allows you to create and maintain an authorized list of users t hat are allo wed to access th e print server . User Ac cess By configuri ng the Enable Authori sed User List option ( Ye s ), the user in t he User List is pe rmitte d to access th e print ser ver .
36 ADVANCED > E-Mail Notification The E-Mail Notificat ion screen allows yo u to assign an e- m ail address to the print ser v er , so that yo ur mail of the a ccount can be printed out direct ly through the pr inter ( ASCII text o nly). This scr e en also allow you choose wh ere to send an email when the printe r status changes.
37 Enable E-mail Notification Y ou can set the pr int server t o send an alert messag e wh en the printer s tatus changes through e-mail. T o e n able this func tion, click Ye s in Enab le e- mai l notification . Then , input the ad minis trator's e-mail address in the D estination e-mail Address box.
38 ADVANCED > SNMP The SNMP scr een allo ws you t o u se SNMP (Simple Net wor k Manage me nt Protocol) to manag e complex net works. SNMP Management Commun ity 1/ 2/3 : Ente r a n ame in the Name box, and configure the Access Right by selec ting Read Only or Read/ Write from th e drop-d own li st.
39 MAINTENANCE > Password The Password screen allows you to cha nge the password of th e print server by entering the current password in Current Password and new passwo rd in New Password and Conf ir m Pass w ord . After done the co nfiguration, click Apply Settings to enab le and r estore the n ew password, or Cance l to abando n.
40 MAINTENANCE > Save/Restore Settings The Save/Restore Settings scr e en not only al lows you to save the current configuration in a computer for backup by clicking Save in Save Settings to Local .
41 MAINTENANCE > Firmware Upgrade The Firmware Upgrade screen display s you the current fi rmware’ s information of the pri nt server , and a lso allows you t o up gr ade the firmwar e of the pr int server when a new version of firmware is available.
42 MAINTENANCE > Diagnostics The Diagnostic s sc reen al lows you to te st the prin ting f or LPT /USB por t of the print ser ver . After se lecting a po rt, click Print T est Pag e to print a test pag e.
43 STATUS > Devic e In f o The Device Info screen displays th e st atus of you r print s erver , printer , and network for y our refere nce..
44 Print Server St atus This field displays the informat ion of the print server a bout the fi rm ware vers ion, MAC/IP addres s, and up ti me. Printer St atus The items in thi s f ield display the inform at ion of the printer , such as the given name for th e prin ter , spee d , prin ter s t atu s, and status of your p rinting tasks, etc.
45 STAT US > Ne twor k The Network screen displays the gen eral Network st atus of your pr i nt server ..
46 Auto IP This fiel d contains t he curre nt set tings of TCP/IP , inclu ding DHCP/BO O TP , UPnP , and Mac Bonjour/Rendezvous . The it ems in this f ield are co nfigur ed in Advanced Æ Advanced LAN Æ TCP/IP . TCP/IP Printing In this field , you can m onito r the st atus of your printing tasks thr ough TCP/IP .
47 STATUS >Print Log The Print Log scr ee n d isplays the print i ng record of the autho rized users. Print Lo g The items in thi s f ield disp lay the user( s ) information, which include the user(s) MAC add ress, IP address , name, and s t atus o f printing tas ks.
48 HELP The Hel p sc reen prov ides you brief i nformation abo ut the prin t server for your reference ..
49 Reboot If you want to rese t t he prin t ser ver , yo u m ay just cli ck Rebo ot for restarting ..
50 Refresh Prin ter Status Click a po rt name to re fresh the st a tus of the co nnected prin ter ..
51 TCP/IP Printing for Windows Vista Go to Sta rt Î Control Panel Î Pr inters ..
52 Click Add a printer . Select the first option, Add a local printer , and th en cl ick Next ..
53 Select the second option, Create a new port , and highlight S t andard TCP/IP Port from the pull-down m enu. Click Next ..
54 T ype the IP address of the print server (e.g. 10.62.31.15 used in this manual), which can be referred from the PRINTER SER VER ST A TUS of the print server ’s Web configurat ion , and then th e Por t Name will automatically be fill ed in.
55.
56 Select Custom and click Se t tin gs . Then the follo w screen w ill show s up, selec t LPR from the Protocol field . Then enter the Queue Name , whic h can be re ferred fr om PR INTER ST A TUS of the pr int server ’s W eb confi gurat ion, in the LPR Settings fiel d.
57.
58.
59 Highlight the printer , as show n. If the desired printer is not on the list, click Have Disk and insert the p rinter driver dis k that c ame w ith your printer to ins tall the printer driv ers.
60 Click Next ..
61 After clicked Print a test p age , a small dialogue box w ill show up as below . Click Clo se ..
62 Click Finish . The printer is now ready for printing with Windows V ist a on y our net work..
63 TCP/IP Printing for Windows XP Go to Sta rt Î Printers and Faxes Î Add a Printer . When the following screen shows up, click Next ..
64 Select the first option, Local printer att ached to this comput er , and cli ck Next ..
65 Select the second option, Create a new port , and highlight S t andard TCP/IP Port from the pull-down m enu. Click Next ..
66 T ype the IP address of the print server (e.g. 10.62.31.15 used in this manual), which can be referred from the PRINTER SER VER ST A TUS of the print server ’s Web configurat ion , and then th e Por t Name will automatically be fill ed in.
67.
68 Select Custom and click Se t tin gs ..
69 Then the follo w screen w ill show s up, selec t LPR from the Protocol field . Then enter the Queue Name , which can be referred fr om PRINTER ST A TUS of the pr int server ’s W eb confi gurat ion, in the LPR Settings fiel d.
70.
71 Click Next ..
72 Click Finish ..
73 Highlight the printer , as show n. If the desired printer is not on the list, click Have Disk and insert the p rinter driver dis k that c ame w ith your printer to ins tall the printer driv ers.
74 Select Y es t o print a te st page, click Next ..
75 Click Finish . The printer is now ready for prin ting with Wind ow s XP on your network..
76 TCP/IP Printing for Windows 2000 Go to Sta rt Î Settings Î Printers and Faxes Î Add a Printer ..
77 When the foll owing screen s hows up, clic k Next ..
78 Select the first op tion , Local printer att ached to this computer , and click Next ..
79 Click Next ..
80 Select the second option, Create a new port , and highlight S t andard TCP/IP Port from the pull-dow n menu. C lic k Next ..
81 Click Next ..
82 T ype the IP address of the print server (e.g. 10.62.31.15 used in this manual), which can be chec ked from the PRINTER SER VER ST A TUS of the prin t s er ve r ’ s Web configurat ion , and then th e Por t Name will automatically be fill ed in.
83.
84 Select Custom and click Se t tin gs ..
85 Then the follo w screen w ill show s up, selec t LPR from the Protocol field . Then enter the Queue Name , which can be referred fr om PRINTER ST A TUS of the pr int server ’s W eb confi gurat ion, in the LPR Settings fiel d.
86.
87 Click Next ..
88 Click Finish ..
89 Highlight the printer , as show n. If the desired printer is not on the list, click Have Disk and insert the p rinter driv er disk that came with your printer to install the printer driv ers.
90 At this s creen, yo u can input a name for the printer , and then cli ck Nex t.
91 Select the first option, Do not shar e this print er , a nd c lic k Next ..
92 Select Y es t o print a te st pa ge, click Ne xt ..
93 Click Finish . The printer is now ready for prin ting with Wind ows 200 0 on y our network..
94 TCP/IP Printin g for Wi ndows 98SE/ME Go to Sta rt Î Settings Î Control Panel . Doubl e click on Network , and then click Ad d ..
95 Highlight Cl ien t and click Add . At this w indow , click Have Disk ..
96 1. Insert th e DP-30 0U CD-ROM into your CD-ROM drive. Selec t the letter repres enting th e CD-ROM dr ive on your compu ter from t he pull- down menu. 2. Double-click on the folder lpr . 3. Highlight lpr .inf 4. Click OK . Click OK to a ccept the l oc ation of the file.
97 Y ou should now be back to the Ne twork Prop erties Page. Highli ght LPR for TCP/IP Printing and click Properti es ..
98 Click Add Port . T ype in the IP address and Port Name of the pr i nt ser ver , which can be referred from the PRINTER SERVER ST A TUS and PRINTER ST A TUS of the print server ’ s W eb configuration, in the corr esponding field, and then click OK .
99.
100 The IP Add ress and Port N ame will be di splayed in the follow ing screen. ( The IP Address a nd Port Name here are just for exam ple onl y.) C lick OK .
101 Click OK . Windows will ask for a rest art. Click Ye s ..
102 Once you r computer has reb ooted, click on Star t Î Settings Î Printers Î Add Printer . When the Add Prin t er W iz ar d scr een appe ars, click Next .
103 T ype in th e p ath if y ou kn ow it; otherw ise, click Browse . At the following scre en, brows e for the pr inte r port and highlig ht the port ( e.
104 If th e n etwo rk p a th is no t sp ecifie d, type in the IP A ddress a nd Port Name of the print server . Sele ct Y es or No to enable or disable pr inting f rom MS-DOS bas ed programs.
105 Highlight the printer , as show n. If the desired printer is not on the list, click Have Disk and insert the p rinter driver dis k that c ame w ith your printer to ins tall the printer driv ers.
106 Select Ye s to print a tes t p age . Cl ic k Finish . T o check whe ther the printer is inst alled, go to Start Î Settings Î Printers ..
107 Unix /Li nux Pr intin g Print ing T ext Files form Unix T ext files on Unix sy stems cont ain lines tha t end with “newli ne” characters, as opposed to MS-DOS an d Windo ws-relat ed opera ting syst ems that end with a carriage retur n followe d by a linefeed .
108 Printing form BSD Unix Versions For “fla vors” of th e Un ix operating system derived f r om or related to the BSD releases, such as SunOS 4.x, Linux, B SD /OS, F re eB S D, or N etB S D, y ou c an us e the fo llowing proce dure to enable users to print to a printer co nnected t o your D-LINK network print server: 1.
109 5. Add an entry for th e pr i nt er to /etc/pr intca p , similar to the follow ing: hp5l: :lp= :sd=/var/ spool/ hp5l :mx#0: :rm=ps -142634: rp=ps-142 634-p1: The meanin g of each of th e entries is described below . The directory path in the sd spoo l direct ory ent ry shoul d match t h e directory name yo u crea ted above.
110 ◆ rm=address The hos t where the re mote printer is l ocated, in this case the D-Link prin t serv er . ◆ rp=printer The name of the printe r on the rem ote host. For th e D- Link p rint server , the port na me should be use d. Note: th is entr y is ca se- s ensit i ve .
111 Printing from SCO Unix Sy stem V/386 T o allow printi ng to a prin ter att ached to your D-L INK netw ork prin t serv er from a SCO Unix System V/386 host. 1. Login as the superuser (roo t). 2. Add an entry for the prin t server in the host’s /etc/ho sts file, giv ing a host name for the pr int server’s I P ad dress.
112 7. Answer r (remote printer) to the que stion Is printer a rem ote printe r or a local prin ter (r /l)? 8. When p rompted w i th the question: Please enter the name of the remote host that prin ter is atta ched to: then en ter the addr ess o f the D-Link print se rver .
113 Printing from Solaris T o allow printing from a Sun Solaris workstation, 1. Log in as the superuse r (root). 2. Add an entry for the prin t server in the host ’s /etc/h osts file, giving a hostname for the pr int server’s I P ad dress. A lin e in /etc/hos ts contains an IP addres s and one or more aliases for the host .
114 Printing from Red Hat Linux Adding a Printer 1. Click the printer icon at th e b ottom of the d esktop. 2. Since no printer is set up so far , a pr omp t a ppears askin g t o r un the printer configuration tool.
115 configuration tool menu. Note that to use the Printer configur at ion tool you must hav e root privileges, and to s ta r t the applicat ion you may a lso type the comman d: “redhat- config-pr inter ”. 4. Click the New button in the Printer configuration tool menu.
116 5. The Add a new pr int queue menu appea rs, click Forward to conti nue..
117 6. Enter a uniqu e na me for the pr inter i n t he Name text field . Th e printer nam e cannot co ntain spaces an d must begin wit h a letter . The prin ter name may contain letters, num bers , dashes (-), a nd unde rscores (_). Optionally , enter a short desc ripti on for th e prin te r , whic h can cont ain spaces .
118 8. Select the printer model..
119 If a printer has not been detected auto matica lly , select the model from the lis t. Y ou can manu ally select t he name of th e printer manufact urer fr om the Ge neric (cli ck to sele ct manufactu rer) pull-down m e n u, and the prin ter model from the sub-list.
120 10. Print a test page to make sure the printer is functionin g properly . T o print a test page, select th e printer from t he print er list, th en select t he appropria te test page from the T est drop-d ow n menu .
121 Sett ing up Prin tin g in Mac OS X Tig er (1 0.4) NOTE : Mac OS printing is supported by Postscript printers only ! With Mac OS X T iger (10.4) , you can use Apple T alk, Bonjour , I nternet Printing Protocol ( IPP), Line P rinter Daemo n (LPD ), and HP J et Direc t-Socket printing through P rint Server .
122 Ta l k A c t i v e opt ion. Click on t he Apply Now butt on and cl ose the menu. Apple T al k is now active on the syst em . Now a prin ter can be ad ded .
123 Adding a Printer Use t he Go menu at th e top tool b ar and sel ect Applications o ption and find th e Utilities fold er or open the Utilities folder directly in Go menu. In the Utilities folder , find and select to ope n Printer List window . If no printer has been set up on y our M acintosh , you will be prompted to add a print er .
124 Mac OS X T iger (10. 4) supports five printing prot ocols: 1. AppleT alk 2. Bonjour 3. Internet Printi ng Protoc ol (IPP) 4. Line Printer Daemon (LPD) 5.
125 AppleTalk-enabled or Bonjour-enabled Printers T o add an AppleT alk-enabled or Bonj our-enabled printe r , click on t he button in t he Printer Browser menu. Select the print er model from Printer Name lis t an d Connection type in t he Printer Browser menu.
126 The prin te r that h as jus t bee n added will show up in the Printer List menu, it might take a few seconds depending on network conditions. When the printer.
127 appears listed it is re ady for use. Quite the Pr inter Setup Utili ty an d st art p rinting..
128 Addin g an IP Pri nter T o add an Internet Printing Pr otocol enabled, Li ne Printer Daemon enabled or HP Jet Dir ect – Socket ena bled prin ter , c lick o n the IP Pri nte r but ton in the Printer Brow ser window . Select the desire d pri nting protoc ol from the Protocol drop-dow n menu .
129 correct pr inter driver in the Print Using field. Or ma nu ally s elect the prin ter- make r from the Print Using drop-down menu, and then select the printe r model from the scroll - do wn list , or select Generic PostScrip Printer option f r om the Print Using drop-dow n menu if the model is not liste d.
130 For set up LPD Printing: 1. Ente r the IP address of the p rint s erv er to w hich th e prin ter is att ach ed in Addr ess field. 2. T ype the port name in queue field. Click Add button after done t he sectio n of printe r model in the Print Using drop-dow n menu .
131 For set up IPP Printing: 1. Ente r the IP address of the p rint s erv er to w hich th e prin ter is att ach ed in Addr ess f ield. After that, type “: 80” or “: second port” if print server ’ s second port is en abl ed. 2. T ype the port name in queue field .
132 For set up S ocket Printing: 1. Enter t he IP address of the print serv er to which th e printe r is att ached i n Addr ess f ield. After that, type “: 91 00” for port 1, “: 9101” for port 2 or “: 9102” for port 3. 2. Keep the blank in que ue fie ld.
133 drop-dow n menu . When the Inst allabl e Options pop-up window shows up as below , click Continue button..
134 The prin te r that h as jus t bee n added will show up in the Printer List menu, it might take a few seconds depending on network conditions. When the printer appears listed it is re ady for use. Quite the Pr inter Setup Utili ty an d st art p rinting.
135 Setting up AppleTalk or LPR Printing in Mac OS X NOTE : Mac OS prin ting is su ppor ted by Post script pr i nt ers only! With Ma c OSX you c an use AppleT alk or L PR prin ters usin g IP protocols f or printing through Print Servers. Open your Syst e m Preferenc es wind ow and Click Networ k.
136 Select Edit Printer List from the Printer dialog box . Click Add Printer.
137 Select the printi ng protoc ol prefe rred, AppleT alk or LP R Printers using IP . In this ex ample, AppleT alk has been selected . AppleT alk protocol: After selecting AppleT al k, the Port Name s.
138 will be displayed. The Port Names shown he r e are exam ples only . Click on the Port to which the post-s cript printe r is connec ted..
139 Then select th e printer mo del from th e dialog box displa yed here. Click Add Printer and t he Printer Port c o nf igurati on is completed. Select t he Printer Port just configur ed in the Print windo w .
140 Settin g up Appl eTalk Print ing in Mac OS 9 NOTE : Mac OS prin ting is su ppor ted by Post script pr i nt ers only! The AppleT alk netw ork pr otocol is us ed with comp uters us ing the MacO S operating system.
141 which zone the Prin t Server shoul d be in. Y ou should locate the Print Server in the same zone as most of the users who will be using it. If your ne twork is not divided into zones , the AppleT alk Zone field sh ould contain a sing l e ast erisk ( *).
142.
143 AppleTalk Enter the AppleT alk Zone name i n th e box. In the following opt ions, enter the relat ed conf igurati on, such as th e printe r type. Chooser Name : Displa y the print server's po rt na me. Printer T ype : Enter the printer's type in this box.
144 If you have n ot previo usly s et this printe r as the default, your comput er will prompt you for a PostSc ript Prin ter D escription file. C hoose Select PPD . Select the appropriat e printer descri pt ion file for your printer . Click Open. (If your printer is not lis ted, clic k Ge neri c to use a generic p rinter description.
145 Technical S pecifica tions Printer Connecti on Printer Port: Parallel and USB port Bi-directional Communication: Hewlett-Packard PJL (P rinter Job L anguage) standard for bi-directi onal communication.
146 Appendix: DP-300U Printer Compatibility List The Canon Printer Canon BJC-255SP Canon BJ-330 Canon BJ C- 600, 62 0 Canon BJC-2000SP Canon BJ C- 4100, 4 300, 4500, 45 50 Canon BJ C-6000, 6500 Cano n.
147 IBM 5577 IBM 4039 16L IBM Infor Printe r 20 IBM InfoPrin t 32 The Lexmark Pr inter Lexmark 4039 10R Lexmark 5700 Lexmark Optra Color 45 Lexmark Optra C710 Lexmark Optra E, E +, E310 Lexmark Optra .
デバイスD-Link DP-300Uの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
D-Link DP-300Uをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはD-Link DP-300Uの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。D-Link DP-300Uの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。D-Link DP-300Uで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
D-Link DP-300Uを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はD-Link DP-300Uの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、D-Link DP-300Uに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちD-Link DP-300Uデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
