D-LinkメーカーDSL-510の使用説明書/サービス説明書
ページ先へ移動 of 83
DSL-510 ADSL Router User ’s Guide i DSL-510 ADSL Router User’s Guide (First Edition May 2003).
DSL-510 ADSL Router User ’s Guide i FCC W arning This equipment has been tested and found to comply with the limits for a Class B digi tal device, pursuant to part 15 of the FCC Rules. These limits are d esigned to provide reasonable protection agains t harmful interference in a residential installation.
DSL-510 ADSL Router User ’s Guide ii T ABLE OF CONTENTS About This User ’ s Guide ......................................................................................... V Guide Overview ..........................................................
DSL-510 ADSL Router User ’s Guide iii W indows 2000 fo r DHC P ......................................................................................................... ............ 9 W indows ME for DHC P ...........................................
DSL-510 ADSL Router User ’s Guide iv Log ........................................................................................................................... .............................. 67 T raffic .........................................
DSL-510 ADSL Router User ’s Guide v About This User ’ s Guide This user ’s guide provides instructions on how to in stall the DSL-5 10 ADSL Rout er and use it to connect a computer or Ethernet LAN to the Internet.
DSL-510 ADSL Router User ’s Guide vi Before Y ou Start Please read and make sure you understa nd all the pr erequisites for proper installati on of your new Router . Have all the necessary information and equipment on hand before beginni ng the installation.
DSL-510 ADSL Router User ’s Guide vii Ethernet Port (NIC Adapter) Any computer that uses the Router must be able to connect to it th rough the Ethernet port on the Router . This connection is an Etherne t connection and theref ore requires that your co mputer be e quipped with an Ethernet port as well.
DSL-510 ADSL Router User ’s Guide viii Unpacking Open the shipping carton a nd carefully remove all items. In addition to this User's Guide, ascertai n that you have: 1. One DSL-510 ADSL Router 2. One CD-ROM with this User’s Gu ide and the Quick Installation Guide 3.
DSL-510 ADSL Router User ’s Guide 1 Chapter 1 - Introduction ADSL modem technology is a relatively new technology and ma y be unfamiliar to the reader. In this section, we introduce you to ADSL technology and give a brief description of its ke y attributes.
DSL-510 ADSL Router User ’s Guide 2 Front Panel Place the Router in a location where t he LED indicators can be easily viewed. The LED Indicators read as follows: Pow er Steady green light indicates the unit is pow ered on. Status Blinking green indicates normal operation.
DSL-510 ADSL Router User ’s Guide 3 Chapter 2 - Hardware Installation In this chapter you w ill learn about t he various connections you w ill need to make in order to use the Router . When selecting the location for the Router, allow ample room to access the conn ections on the rear panel.
DSL-510 ADSL Router User ’s Guide 4 Hub or Switch to Router Connection Connect the Router to an uplink port (MDI-II) on an Ether net hub or switch with a straight -through cable as shown in the diagram below: Power On Router T o power on the device: 1.
DSL-510 ADSL Router User ’s Guide 5 Chapter 3 - Configuring the Router for the First Time The first time you setup the Router it is rec ommended that you configur e the WAN connection using a single computer making sure that both the computer and the Router are not connected to t he LAN.
DSL-510 ADSL Router User ’s Guide 6 Windows XP for DHCP 1. In the Windows task bar, click the Start button, point to Settings , and then click Control Panel . 2. Double-click the Network Connections icon. 3. In the LAN or High-Speed Internet wi ndow, right-click on icon corresp onding to your net work interface card (NIC) and select Properties .
DSL-510 ADSL Router User ’s Guide 7 4. In the General tab of the Local A rea Connection Propertie s menu. Highlight Internet Protocol (TCP/IP) under “This connection uses the following items.” by click on it once. Click on the Properties button.
DSL-510 ADSL Router User ’s Guide 8 6. The Local Area Connection Properties window appears. Click OK button. Your computer is now ready to use the ADSL Router DHCP server.
DSL-510 ADSL Router User ’s Guide 9 Windows 2000 for DHCP 1. In the Windows task bar , click the Start button, point to Settings , and then click Control Panel . 2. Double-click the Network and Dial-up Connections icon. 3. In the Network and Dial-up Connections window , right-click the Local Area Connection icon, and then select Properties .
DSL-510 ADSL Router User ’s Guide 10 4. In the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP) , and then click Properties . 5. Select “ Obtain an IP address automatica lly ” by clicking once in the circle. Click OK to confirm and save your changes, and then close the Control Panel.
DSL-510 ADSL Router User ’s Guide 11 6. The General tab will again appear. Click OK button. Your computer is now ready to use the ADSL Router DHCP server.
DSL-510 ADSL Router User ’s Guide 12 Windows ME for DHCP 1. In the Windows task bar , click the Start button, point to Settings , and then click Control Panel .
DSL-510 ADSL Router User ’s Guide 13 3. In the Network windows appears. Select the Configuration tab, select TCP/IP protocol line that has been associated with y our network card/adapter. and then click Properties . 4. In the TCP/IP Properties windo ws appear, then choose the IP Address tab, click the Obtain and IP automatically option.
DSL-510 ADSL Router User ’s Guide 14 5. The Netw ork window again appears, click OK button. Your computer is now ready to use the ADSL Router DHCP server.
DSL-510 ADSL Router User ’s Guide 15 Windows 98SE for DHCP 1. In the Windows task bar , click the Start button, point to Settings , and then click Control Panel .
DSL-510 ADSL Router User ’s Guide 16 3. In the Network windows appears. Select the Configuration tab, select TCP/IP protocol line that has been associated with y our network card/adapter and then click Properties . 4. In the TCP/IP Properties windo ws appear, then choose the IP Address tab, click the Obtain and IP automatically option.
DSL-510 ADSL Router User ’s Guide 17 5. The Netw ork window again appears, click OK button. 6. The System Settings Change window appears. You need to restart your co mputer for the cha nges to go into effect.
DSL-510 ADSL Router User ’s Guide 18 Access the Web Configuration Manager Once the computer has IP settings that allow it to access the web-based conf iguration software, you can change the settings to enable the Router to connect to the Internet.
DSL-510 ADSL Router User ’s Guide 19 Using the Configuration Wizard 1. Once you have logged in, the Home screen w ill appear. Click Run Wizard button. 2. The Setup Wizard screen will appear. Follow the Wizard step by step to quickly co nfigure the DSL-510.
DSL-510 ADSL Router User ’s Guide 20 3. Set up your new password. It is recommended that you change the 510admin password for se curity purposes. Enter in your new password. Enter it in a second time for verification. Click the Next button. 4. There will be four options to select from.
DSL-510 ADSL Router User ’s Guide 21 Dynamic IP A ddress If your selected Dynamic IP A ddress , you will see the follo wing page. You will need to enter in VPI , VCI and select your connection type. The information provided to you by your ISP. Click Next button.
DSL-510 ADSL Router User ’s Guide 22 PPPoE/PPPoA If your selected PPPoE/PPPoA , y ou will see the following pag e. Enter in the Use Name , Passw ord , VPI , VCI and select your connection type provided to y ou by y our ISP. Click Next button. Bridge Mode If your selected Bridge Mode , y ou will see the follo wing page.
DSL-510 ADSL Router User ’s Guide 23 5. At this point, the Setup Wizard has completed. Click Restart to save the se ttings and reboot the DSL-510. 6. The DSL-510 will save the changes and reboot. Click Close button to close out the Setup Wizard screen.
DSL-510 ADSL Router User ’s Guide 24 Configuring IP When Setting Your Computer If you connection type as Dynamic IP Address, Static IP A ddress and PPPoE/PPPoA , Don’t care configuring IP setting on you Computer. Your computer is used the ADSL Router DHCP server.
DSL-510 ADSL Router User ’s Guide 25 3. In the LAN or High-Speed Internet wi ndow, right-click on icon corresp onding to your net work interface card (NIC) and select Properties . (This icon may be labeled Local Area Connection ) 4. In the General tab of the Local A rea Connection Propertie s menu.
DSL-510 ADSL Router User ’s Guide 26 5. The Internet Protocol (TCP/IP) Propert ies window appears. Under the General tab, select Use the following IP address: , enter the IP addr ess , Subnet Mask ,.
DSL-510 ADSL Router User ’s Guide 27 Windows 2000 IP Setting for Bridge Mode 1. In the Windows task bar , click the Start button, point to Settings , and then click Control Panel .
DSL-510 ADSL Router User ’s Guide 28 4. In the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP) , and then click Properties . 5. The Internet Protocol (TCP/IP) window appears. Under the General tab, select Use t he following IP address .
DSL-510 ADSL Router User ’s Guide 29 6. The General tab will again appear. Click OK button. 7. The Local Netw ork window appears. Y ou need to restart your comput er for the changes to go into ef fect.
DSL-510 ADSL Router User ’s Guide 30 Windows ME IP Setting for Bridge Mode 1. In the Windows task bar , click the Start button, point to Settings , and then click Control Panel .
DSL-510 ADSL Router User ’s Guide 31 3. In the Network windows appears. Select the Configuration tab, select TCP/IP protocol line that has been associated with y our network card/adapter. and then click Properties . 4. The TCP/IP Properties window appears.
DSL-510 ADSL Router User ’s Guide 32 5. Select Gateway tab and enter the IP settings in the Ne w ga t e way field. Click Ad d . 6. Select the DNS Configuration tab. Select the Enable DNS option. 7. Type in your host name in the Host: field. 8. Type in your domain name in the Domain: field.
DSL-510 ADSL Router User ’s Guide 33 9. Enter the DNS settings in the DNS Server Order field and click Add . If you have more than one DNS IP addr ess, repeat this step. You can have up to 3 DNS servers listed here. 10. After all the TCP/IP information has been entered, click OK .
DSL-510 ADSL Router User ’s Guide 34 11. The Netw ork window again appears, click OK button. 14. The System Settings Change window appears. You need to restart your co mputer for the changes to go into effect.
DSL-510 ADSL Router User ’s Guide 35 Windows 98SE IP Setting for Bridge Mode 1. In the Windows task bar , click the Start button, point to Settings , and then click Control Panel .
DSL-510 ADSL Router User ’s Guide 36 3. In the Network windows appears. Select the Configuration tab, select TCP/IP protocol line that has been associated with y our network card/adapter and then click Properties . 4. The TCP/IP Properties window appears.
DSL-510 ADSL Router User ’s Guide 37 5. Select Gateway tab and enter the IP settings in the Ne w ga t e way field. Click Ad d . 6. Select the DNS Configuration tab. Select the Enable DNS option. 7. Type in your host name in the Host: field. 8. Type in your domain name in the Domain: field.
DSL-510 ADSL Router User ’s Guide 38 9. Enter the DNS settings in the DNS Server Order field and click Add . If you have more than one DNS IP addr ess, repeat this step. You can have up to 3 DNS servers listed here. 10. After all the TCP/IP information has been entered, click OK .
DSL-510 ADSL Router User ’s Guide 39 11. The Netw ork window again appears, click OK button. 12. The System Settings Change window appears. You need to restart your co mputer for the changes to go into effect.
DSL-510 ADSL Router User ’s Guide 40 Chapter 4 – Web-based Configuration This chapter describes ho w to use the embedded web-based management softwa re to configure the Router for additional PVC connection profiles, to change the LAN IP address, to change the global WAN IP address a nd to perform other management functions.
DSL-510 ADSL Router User ’s Guide 41 WAN WAN is short for Wide Area Net work. The WAN settings can be re ferred to as the Public settings . All IP information in the WAN settings are public IP addresses which are accessible on the Internet.
DSL-510 ADSL Router User ’s Guide 42 Home ＞ WA N ＞ Static IP A ddress Choose Static IP Address if all W AN IP information is provided to you by your ISP. Yo u will need to enter in the VPI, VCI, IP Address, Subnet Mask, ISP Gateway Address, DNS Address and select connection t ype provided to you by your ISP.
DSL-510 ADSL Router User ’s Guide 43 Home ＞ WA N ＞ PPPoE/PPPoA Choose PPPoE/PPPoA if you’re ISP uses PPPoE/PPPoA connec tion. Your ISP will provide you with a username, password, VPI, VCI and select connection ty pe. This option is typically used for DSL service.
DSL-510 ADSL Router User ’s Guide 44.
DSL-510 ADSL Router User ’s Guide 45 Home ＞ WA N ＞ Bridge Mode Choose Bridge Mode if all W AN IP information is provided to you by your ISP. Yo u will need to enter in the VPI, VCI and select connection type provided to you by your ISP. VPI: If instructed to change this, type in t he VPI value for the initial connection.
DSL-510 ADSL Router User ’s Guide 46 LAN LAN is short for Local Area Network. This is consi dered your internal n etwork. These are the IP settings of the LAN interface for the DSL-510. These settings may be referred to as Private settings. You ma y change the LAN IP address if needed.
DSL-510 ADSL Router User ’s Guide 47 DHCP DHCP stands for Dynamic Host Control Protocol. T he DS L-510 has a built-i n DHCP server. The DHCP Server will automatically assign an IP address to the computers on the LAN/priv ate network.
DSL-510 ADSL Router User ’s Guide 48 DNS The DNS Configuration page allows the user to set the configuration of DNS proxy . DNS proxy selection: (1) Disable DNS Proxy: The LAN port does not proc ess the DNS query message.
DSL-510 ADSL Router User ’s Guide 49 Advanced Virtual Server The DSL-510 can be config ured as a virtual se rver so that remote users accessing Web or FT P services via the public IP address can be automatically redirected to local servers in the LAN netw ork.
DSL-510 ADSL Router User ’s Guide 50 Filters Filters are used to deny LAN computers from accessing the Inte rnet. The Router can be setup to deny internal comput ers by their IP or MAC addresses. The DSL-510 can also block users from accessing restricted w eb sites.
DSL-510 ADSL Router User ’s Guide 51 Adv anced ＞ Filters ＞ Inbound Filters-Inboun d: Use IP Inbound Filters to deny WAN IP addresses fr om accessing the i nternal network. You can den y specific port numbers or all ports for the specific IP address.
DSL-510 ADSL Router User ’s Guide 52 Schedule This is the schedule of time when the IP Filter will be enabled. Schedule Name: defines the name of this time schedule . Schedule: drop dow n menus help you in conf iguring the start and end days of t he time interval in one option .
DSL-510 ADSL Router User ’s Guide 53 Routing The Route Table page dis plays routing table and allows the user to manu ally enter the routing entry. The routin g table will display the routing status of Destination, Netmask, Gate way and Interf ace. The interface lo0 me ans the loop back interface; and ppp1 means the PPP interface.
DSL-510 ADSL Router User ’s Guide 54 DMZ If you have a client PC that cannot run In ternet appl ications properly from behind the DSL-510, then you c an set the client up to unrestricted Internet acc ess. It allows a computer to be exposed to the Internet.
DSL-510 ADSL Router User ’s Guide 55 Firewall Firewall Rules is an advance feature used to den y or allow tra ffic from passing through the DSL-510. It works in the same way as IP Filters with additional settings. You can create more detailed rules for the Router.
DSL-510 ADSL Router User ’s Guide 56 RIP The RIP Configuration page allows the user to set the configuration for th e system wide configuration of RIP.
DSL-510 ADSL Router User ’s Guide 57 Adv anced ＞ RIP ＞ Adv anced Configuration Interface: This field allo ws the user to choose the Interface ( PVCs, PPP Sessions and LAN), for the RIP to be configur ed. A ction: This field allows the user to Enable (Yes) or Disable (No) the specifi ed interface for RIP.
DSL-510 ADSL Router User ’s Guide 58 PPP PPP is configured as a group of software settings as sociated with the ADSL port. Although the device has only one physical ADSL port, the Router can be defined with more than one group of PPP settings. Each group of settings is called a PPP interface and is given a name, such as ppp-0, ppp-1 , etc.
DSL-510 ADSL Router User ’s Guide 59 Adv anced ＞ PPP ＞ PPP Account Configuration User Name: The name you use to log in to your ISP each time this PPP connec tion is established. Passw ord: The password you use to log in to your I SP each time this PPP c onnection is established.
DSL-510 ADSL Router User ’s Guide 60 SNMP SNMP (Simple Network Management Protocol) is a widely us ed network monitoring a nd control protocol that reports activity on each net work device to the adm inistrator of the network. SNMP can be us ed to monitor traffic and statistics of the DSL-510.
DSL-510 ADSL Router User ’s Guide 61 Tools Admin At this page, the DSL-510 administrator can chan ge the system password. T he default value is 510adm in , which has read/write access w hile. New Password : Type in the new passw ord. Confirm Passw ord: Type in the new passw ord a second time for confirmation.
DSL-510 ADSL Router User ’s Guide 62 System The current system settings can be saved as a file onto the local hard drive. The sa ved file or any other saved setting file can be loaded back on the A DSL Router. To reload a system se ttings file , click on Browse to browse the local hard drive and locate the system file to be used.
DSL-510 ADSL Router User ’s Guide 63 In order to keep pace with changes in ADSL standar ds and technology the DSL-51 0 allows you to easily update the embedded firmware. Y ou may obtain th e latest version of the DSL-510 firmware by logg ing onto the D-Link web site at D-Link T echnical support website of your country .
DSL-510 ADSL Router User ’s Guide 64 3. Choice the file (FIRMWARE.DLF). 4. Click Apply button..
DSL-510 ADSL Router User ’s Guide 65 5. Power Off the ADSL Router about 30 seconds, then Pow er On. Misc. These are additional tools and feat ures of the ADSL Router. Ping Test: This useful diagnostic utility can be used to check if a computer is on the Internet.
DSL-510 ADSL Router User ’s Guide 66 Diagnostic This useful diagnostic utility can be use d to check if a computer is on the Inter net. It sends ping packets and listens for replies from the specific host.
DSL-510 ADSL Router User ’s Guide 67 Status Device Info This page displays the current information for the ADSL Router. It w ill display the WAN, LAN, information. This page allows you to observe the DSL-510 w orking status: Log The ADSL Router keeps a running log of events and activities occurrin g on the ADSL Router.
DSL-510 ADSL Router User ’s Guide 68 Traffic The ADSL Router keeps a statistic of traffic that passes throu gh it. You are able to view the amount of pack ets that passes through the ADSL Router on both the WAN port and the LAN port. The traffic counter will reset if the device is rebooted.
DSL-510 ADSL Router User ’s Guide 69 ATM The ATM Status page shows all the st atistics information of ATM cells. Tx Bytes: Total Good Bytes TX’s Rx Bytes: Total Good Bytes Received Tx Cells: Total.
DSL-510 ADSL Router User ’s Guide 70 TCP The TCP Status page shows the st atistics for all TCP connections. Total Packets Sent; Data Packets Sent; Data B ytes Sent; Total Packets Received; Packets R.
DSL-510 ADSL Router User ’s Guide 71 ADSL Show time Firmware Version: This field displays the D-Link ADSL data pump firmware version number. A DSL Line Status: This field displays the ADSL connection process and status. A DSL Modulation: This field displays the ADSL modul ation status for G.
DSL-510 ADSL Router User ’s Guide 72 Appendix A - Technical Specifications General Standards: ANSI T1.413 issue 2 ITU G.992.1 (G.dmt) ITU G.992.2 (G.lite) Protocol: RFC 1483 Multiprotocol Encapsulation over A T M Adaptation Layer 5 Data T ransfer Rate: G.
DSL-510 ADSL Router User ’s Guide 73 Appendix B – Microfilters and Splitters Most ADSL clients will be required to install a simple device that prevents the ADSL line from interfering with regular telephone services. These d evices are commonly referr ed to as microfilters or sometimes calle d (inaccurately) line splitters.
DSL-510 ADSL Router User ’s Guide 74 Line Splitter If you are instructed to use a “line splitter”, you must inst all the device between the Ro ut er and the phone jack.
デバイスD-Link DSL-510の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
D-Link DSL-510をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはD-Link DSL-510の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。D-Link DSL-510の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。D-Link DSL-510で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
D-Link DSL-510を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はD-Link DSL-510の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、D-Link DSL-510に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちD-Link DSL-510デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
