D-LinkメーカーDWL-810+の使用説明書/サービス説明書
ページ先へ移動 of 29
Building Netw orks for People DWL - 810+ D-Link Air Plus 2.4GHz Ethernet-to-Wireless Bridge Manual.
2 Contents 1. Package Contents ............................................. 3 2. Introduction ........................................................ 4 3. Wireless Basics ................................................. 7 4. Getting S tarted ......
3 1. P ac kage Contents Contents of Package: • D-Link Air Plus DWL-810+ Ethernet-to-Wireless Bridge • AC Power Adapter – 5V; 2.5A • Manual and Warranty on CD • Ethernet Cable ( the DWL-810+ .
4 2. Intr oduction The D-Link Air Plus DWL-810+ Ethernet-to-Wireless Bridge is a device that can be implemented in a variety of ways to provide wireless access by converting an Ethernet connection.
5 Features and Benefits • Transforms an Ethernet device into a wireless device • Up to 22Mbps transfer rates* • Fully compatible with standard 802.
6 Connections Reset Button – press this button to revert to the factory default settings of the DWL-810+ Power Receptor – connect one end of the 5V DC Power Adapter (included) to the power receptor on the DWL-810+ and connect the other end of the Power Adapter to a power outlet.
7 3. W ir eless Basics With the DWL-810+ you can provide instant wireless a ccess to the LAN (Local Area Network) for Ethernet-enabled devices. With an Ethernet (CAT5) cable simply connect the DWL-810.
8 Wireless Basics People use WLAN technology for many different purposes. Mobility - Productivity increases when people have access to data in any location within the operating range of the WLAN. Management decisions based on real-time information can signifi cantly improve worker efficiency.
9 Wireless Basics The DWL-810+ is also compatible with the following D-Link AirPlus family of products: DWL-650+ Enhanced 2.4GHz Wireless Cardbus Adapter for laptop PCs DWL-520+ Enhanced 2.
10 Wireless Basics meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position Access Points and Adapters so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.
11 Getting Started Setup #2 DWL-810+ Setup #2: This example illustrates an Infrastructure setup. To connect the DWL-810+ to a wireless network with a wireless router or access point, please refer to the printed Quick Installation Guide included with the product.
12 5. W e b Configur a tion Before using the Web Configuration for the DWL-810+, please consider the following: Factory Default Settings for the DWL-810+ Operating Mode Infrastructure SSID default Channel 6 Transmission rates Auto Encryption No Administrator passw ord Blank (no passw ord needed) IP Address mode Static IP Address 192.
13 Configuration Menu Whenever you want to configure your network or the DWL-810+, you can access the Configuration Utility by opening the web-browser and typing in the IP Address of the DWL-810+. The DWL- 810+ default IP Address is shown below: (The IP Address shown in the example above is the default setting.
14 Configuration Menu Operating Mode: Select Ad-hoc or Infrastructure. Infrastructure is the default setting. AP Name: You may choose to rename your DWL-810+, especially if you have more than one Access Point on your network. SSID: ( Service Set Identifier ) default is the default setting.
15 Configuration Menu Channel: Channel 6 is the default channel . Input a new number if you want to change the default setting. All devices on the network must be set to the same channel to communicate on the network. WEP Encryption: Select Enable Encryption to use WEP ( W ired E quiv alent P rivacy) on the network.
16 Configuration Menu Admin Administrator Settings: Change your password in this window. Re-ente r the new password to confirm. It can be up to 14 characters in length. Please keep a copy of your password in a safe place. Click Apply , if you have made any changes.
17 Configuration Menu Help The Help window displays information about each window in the Configuration menu. When you change the settings in the Configuration menu, you will need to restart the DWL-810+ for the changes to take effect.
18 6. T r oubleshooting This section provides solutions to situations that can occur during the installation and operation of the DWL-810+ Ethernet-to-Wireless Bridge.
19 How do I assign a Static IP Address in Windows XP/2000? (continued) • Right-click on Local Area Connections • Double-click Properties • Click on Internet Protocol (TCP/IP) • Click Properties • In the window below, select Use the following IP address • Input your IP address and subnet mask .
20 How do I assign a Static IP Address in Windows XP/2000? (continued) • IP Address: e.g., 192.168.0.2 • Subnet Mask: 255.255.255.0 • Default Gateway: Enter the LAN IP address of the wireless router. (D-Link wireless routers have a LAN IP address of 192.
21 How do I assign a Static IP Address in Macintosh OSX? (continued) • Select Built-in Ethernet in the Show pull-down menu • Select Manually in the Configure pull-down menu. • Input the Static IP Address, the Subnet Mask and the Router IP Address in the appropriate fields.
22 Advanced Setup (optional) For advanced setup features, enter http://192.168.0.30 into your Internet browser and gain access to the web configuration of the DWL-810+. The advanced setup features can be used to change the LAN and wireless settings for your DWL-810+ Ethernet-to-Wireless Bridge.
23 8. I cannot connect the DWL-810+ to my network. • Check that the LED indicators for the broadband modem are indicating normal activity. If not, there may be a problem with the broadband connection. • Check that the LED indicators on the wireless router are functioning properly.
24 • If you are using 2.4GHz cordless phones, X-10 equipment or other home security systems, ceiling fans, and lights, your wireless connection will degrade dramatically or drop altogether. Try changing the Channel on your Router, Access Point and all other devices on the network to avoid interference.
25 • Outdoors – Up to 1,312 ft. (400m)* *Environmental factors may adversely affect range Modulation Technology: • PBCC – Packet Binary Convolutional Coding • DSSS – Direct Sequence Spread Spectrum • 11-chip Barker sequence Modulation Techniques: • PBCC (22Mbps/8.
26 Safety & Emissions: • FCC • UL Dimensions: • L=3.5 inches (90mm) • W=3.2 inches (82mm) • H=1.6 inches (40mm) Weight: • 0.34 lbs (153g) Warranty: • 3 Year 9. Contacting T echnical Suppor t You can find the most recent software and user documentation on the D-Link website.
27 10. W ar ranty and Registr a tion Subject to the terms and conditions set forth he rein, D- Link Systems, Inc. (“D-Link”) provides this Li mited warranty for its product only to the person or e.
28 The original product owner must obtain a Re turn Material Authorization (“RMA”) number from the Authorized D-Link Service Office and, if requested, provide written proof of purchase of the product (such as a copy of the dated purchase invoice for the product) before the warranty service is provided.
29 Governing Law : This Limited Warrant y shall be governed by the laws of the State of California. Some states do not allow exclusion or limitation of inci dental or consequ ential damages, or limitations on how long an implied warranty lasts, so the foregoing l imi tations and exclusions may not appl y.
デバイスD-Link DWL-810+の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
D-Link DWL-810+をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはD-Link DWL-810+の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。D-Link DWL-810+の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。D-Link DWL-810+で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
D-Link DWL-810+を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はD-Link DWL-810+の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、D-Link DWL-810+に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちD-Link DWL-810+デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
