D-LinkメーカーWBR-2310の使用説明書/サービス説明書
ページ先へ移動 of 78
.
2 D-Link WBR-2310 User Manual T able of Contents Pr oduct Overview ........................................................ 4 P ac kage Contents ................................................... 4 System Requirements ................................
3 D-Link WBR-2310 User Manual T able of Contents Wireless Security ....................................................... 49 What is WEP? ........................................................ 49 What is WP A? ......................................
4 D-Link WBR-2310 User Manual Section 1 - Product Overview • D-Link WBR-2310 RangeBooster G ™ Router • P ower Adapter • Ether net Cab le • Manual and W arranty on CD System Requirements • .
5 D-Link WBR-2310 User Manual Section 1 - Product Overview Introduction The D-Link RangeBooster G ™ WBR-2310 with enhanced 108 features the industr y’ s first def ault 108Mbps* “Dynamic Mod e.
6 D-Link WBR-2310 User Manual Section 1 - Product Overview • F aster Wireless Netw orking - The WBR-2310 provides up to 108Mbps* wireless connection with other 802.11g wireless clients . This capability allows users to par ticipate in real-time activities online , such as video streaming, online gaming, and real-time audio .
7 D-Link WBR-2310 User Manual Section 1 - Product Overview Hardware Over view Connections Pressing the Reset Button restores the router to its original factory def ault settings. Receptor f or the P ow er Adapter . The A uto MDI/MDIX W AN por t is the connection f or the Ethernet cab le to the Cab le or DSL modem.
8 D-Link WBR-2310 User Manual Section 1 - Product Overview Hardware Over view LEDs WLAN LED A solid light indicates that the wireless segment is ready . This LED blinks dur ing wireless data transmission. Status LED A blinking light indicates that the WBR-2310 is ready .
9 D-Link WBR-2310 User Manual Section 2 - Installation Before you Begin Installation This section will walk you through the installation process. Placement of the router is v er y impor tant. Do not place the router in an enclosed area such as a closet, cabinet, or in the attic or garage .
10 D-Link WBR-2310 User Manual Section 2 - Installation Wireless Installation Considerations The D-Link wireless router lets you access your network using a wireless connection from vir tually an ywhere within the operating range of y our wireless netw ork.
11 D-Link WBR-2310 User Manual Section 2 - Installation If y ou are connecting the router to a cab le/DSL/satellite modem, please f ollow the steps belo w: 1. Place the router in an open and central location. Do not plug the power adapter into the router .
12 D-Link WBR-2310 User Manual Section 2 - Installation If you are connecting the D-Link router to another router to use as a wireless access point and/or s witch, you will ha v e to do the f ollowing.
13 D-Link WBR-2310 User Manual Section 2 - Installation 6. Disconnect the Ether net cab le from the router and reconnect your computer to y our network. 7. Connect an Ether net cable in one of the LAN por ts of the router and connect it to your other router .
14 D-Link WBR-2310 User Manual Section 3 - Configuration Configuration This section will show y ou how to configure your ne w D-Link wireless router using the web-based configuration utility .
15 D-Link WBR-2310 User Manual Section 3 - Configuration Setup Wizard Y ou ma y run the setup wiza rd to qui c kly set up y our rout er . Cli c k Setup Wizar d to launch the wizard.
16 D-Link WBR-2310 User Manual Section 3 - Configuration Clic k Next to contin ue. Create a ne w pass word and then clic k Next to contin ue. Select y our time zone from the drop-do wn menu and then click Next to continue . Select the type of Inter net connection you use and then click Next to continue .
17 D-Link WBR-2310 User Manual Section 3 - Configuration If you selected Dynamic, you ma y need to enter the MA C address of the co mp uter tha t wa s las t con ne ct ed di rect ly to y our mod em . If yo u are cur re nt ly using that computer , click Clone Y our PC’ s MA C Address and then clic k Next to contin ue.
18 D-Link WBR-2310 User Manual Section 3 - Configuration If you selected L2TP , enter y our L2TP user name and passw ord. Click Next to continue . If you selected Static , enter your network settings supplied b y your Inter net provider . Clic k Next to contin ue.
19 D-Link WBR-2310 User Manual Section 3 - Configuration Ch oos e Dyna mi c IP Ad dr es s to ob ta in IP Add res s inf or mation automatically from your ISP . Select this option if your ISP does not give y ou any IP numbers to use. This option is commonly used f or Cable modem ser vices .
20 D-Link WBR-2310 User Manual Section 3 - Configuration Select Dynamic (most common) or Static . Select Static if your ISP assigned you the IP address, subnet mask, gatew ay , and DNS ser v er addresses. Enter your PPP oE user name. Ente r you r PPP oE pass wo rd and then retype the pass word in the ne xt box.
21 D-Link WBR-2310 User Manual Section 3 - Configuration Select Dynamic (most common) or Static . Select Static if your ISP assigned y ou the IP address, subnet mask, gatew ay , and DNS ser v er addresses. Enter the IP address (Static PPTP only). Enter the Pr imary and Secondar y DNS Ser v er Addresses (Static PPTP only).
22 D-Link WBR-2310 User Manual Section 3 - Configuration Select Dynamic (most common) or Static . Select Static if your ISP assigned you the IP address, subnet mask, gatewa y , and DNS ser v er addresses. Enter the IP address (Static L2TP only). Enter the Pr imary and Secondar y DNS Ser v er Addresses (Static L2TP only).
23 D-Link WBR-2310 User Manual Section 3 - Configuration Enter your Big P ond user name. Enter your Big P ond pass word and then retype the pass word in the ne xt bo x. Enter the IP address of the login ser v er . Enter the IP address of the login ser v er .
24 D-Link WBR-2310 User Manual Section 3 - Configuration Enter the IP address assigned by y our ISP . Enter the Subnet Mask assigned by y our ISP . Enter the Gatew ay assigned b y your ISP . The def ault MA C Address is set to the W AN’ s ph ysical int erf ace MA C add res s on the Broa dba nd Rout er .
25 D-Link WBR-2310 User Manual Section 3 - Configuration Check the bo x to enab le the wireless function. If y ou do not want to use wireless, unchec k the box to disab le all the wireless functions. Se rvice Set Id ent ifier (SS ID) is the name of y our wir eles s net work .
26 D-Link WBR-2310 User Manual Section 3 - Configuration This section will allow y ou to change the local network settings of the router and to configure the DHCP settings. Network Settings Enter the IP address of the router . The def ault IP address is 192.
27 D-Link WBR-2310 User Manual Section 3 - Configuration Check the bo x to enab le the DHCP ser v er on y our router . Uncheck to disab le this function. Enter the star ting and ending IP addresses for the DHCP ser v er’ s IP assignment. The length of time for the IP address lease.
28 D-Link WBR-2310 User Manual Section 3 - Configuration The WBR-2310 can be configured as a vir tual ser ver so that remote users accessing W eb or FTP ser vices via the pub lic IP address can be automatically redirected to local ser v ers in the LAN (Local Area Networ k).
29 D-Link WBR-2310 User Manual Section 3 - Configuration This will allow y ou to open a single por t. If y ou would like to open a r ange of por ts, ref er to page 30.
30 D-Link WBR-2310 User Manual Section 3 - Configuration This will allow y ou to open a single por t or a range of por ts. Check the bo x to enab led the rule. Enter a name f or the r ule. Enter the IP address of the computer on your lo cal net wo rk th at y ou w ant to al lo w the inc omi ng ser vice to .
31 D-Link WBR-2310 User Manual Section 3 - Configuration Enter a name f or the r ule. This is the por t used to tr igger the application. It can be either a single por t or a range of por ts. Select the protocol of the trigger por t (TCP , UDP , or ANY).
32 D-Link WBR-2310 User Manual Section 3 - Configuration Network Filters Se le ct Di sa b le MA C fi lt ers , a ll ow MA C add res se s listed below , or deny MA C addresses listed below . Enter the MA C address you would lik e to filter . T o find the MAC address on a computer , please ref er to the Networking Basics section in this manual.
33 D-Link WBR-2310 User Manual Section 3 - Configuration Select T urn W ebsite Filtering OFF , T u r n W ebs ite Fil ter ing ON and ALLO W com pu ter s access to ONL Y these sites , or T urn W ebsite Filt erin g ON and DENY compu ters acce ss to ONL Y these sites .
34 D-Link WBR-2310 User Manual Section 3 - Configuration DMZ Host VPN Passthrough Check this bo x to enab le DMZ. Enter the IP address of the computer you would like to open all ports to. Ch ec k thi s bo x to all ow PP TP VPN tra ffic to pas s through the router to your VPN client.
35 D-Link WBR-2310 User Manual Section 3 - Configuration Tx Rate Preamble WMM Mode Select the basic transf er rates based on the speed of wireless adapters on y our wireless network. It is strongly recommended to keep this setting to A uto . Set the transmit po wer of the antennas .
36 D-Link WBR-2310 User Manual Section 3 - Configuration T o use the Universal Plug and Pla y (UPnP ™ ) f eature clic k on Enabled . UPNP pro vides com patib ili ty with net worki ng equ ipm ent, sof twa re and peripherals. Unchecking the bo x will not allo w the WBR-2310 to resp ond to pin gs.
37 D-Link WBR-2310 User Manual Section 3 - Configuration Enter a new Login Name for the Administrator account. En ter a ne w pa ss wor d f or the Adm ini st r at or Log in Name. The administr ator can mak e changes to the settings. Enter a new Login Name f or the User account.
38 D-Link WBR-2310 User Manual Section 3 - Configuration T ime Settings Select the Time Zone from the drop-down menu. T o select Da ylight Sa ving time man ually , select enabled or disabled, and enter a star t date and an end date f or daylight sa ving time.
39 D-Link WBR-2310 User Manual Section 3 - Configuration Use this option to sav e the current router configuration settings to a file on the hard disk of the computer you are using. First, click the Sav e button. Y ou will then see a file dialog, where y ou can select a location and file name f or the settings.
40 D-Link WBR-2310 User Manual Section 3 - Configuration Click on the link in this screen to find out if there is an updated fir mw are; if so , download the ne w fir mw are to y our hard drive . After you hav e downloaded the new fir mware , click Browse in this window to locate the fir mw are update on your hard dr iv e.
41 D-Link WBR-2310 User Manual Section 3 - Configuration Dynamic Domain Name System is a method of k eeping a domain name link ed to a changing IP Address. Chec k the bo x to enable DDNS . Choose your DDNS provider from the drop down men u. Enter the Host Name that you registered with your DDNS service provider .
42 D-Link WBR-2310 User Manual Section 3 - Configuration VCT is an advanced f eature that integrates a LAN cable tester on ev er y Ether net por t on the router . Through the gr aphical user interf ace (GUI), VCT can be used to remotely diagnose and repor t cable f aults such as opens, shor ts, s waps, and impedance mismatch.
43 D-Link WBR-2310 User Manual Section 3 - Configuration Enter a name f or your ne w schedule. Select a day , a range of days , or All W eek to include e ver y da y .
44 D-Link WBR-2310 User Manual Section 3 - Configuration Log Settings The Broadband Router k eeps a running log of e vents and activities occurr ing on the Router .
45 D-Link WBR-2310 User Manual Section 3 - Configuration This page displa ys the current inf or mation f or the WBR-2310. It will displa y the LAN, W AN, and Wireless inf or mation. If your W AN connection is set up f or a Dynamic IP address then a Release button and a Rene w button will be displa yed.
46 D-Link WBR-2310 User Manual Section 3 - Configuration Log First Page: Last Page: Previous: Next: Clear: View the first page of the log. View the last page of the log.
47 D-Link WBR-2310 User Manual Section 3 - Configuration Stats T h e sc re en be lo w d is pl a ys th e T ra ffi c St at is ti cs . H e r e y ou ca n vi e w t he a m o u n t o f pa c k et s th at pa ss th ro ug h t h e WB R- 23 10 on both the W AN and the LAN por ts.
48 D-Link WBR-2310 User Manual Section 3 - Configuration Support.
49 D-Link WBR-2310 User Manual Section 4 - Security Wireless Security This section will show y ou the diff erent lev els of security you can use to protect y our data from intr uders.
50 D-Link WBR-2310 User Manual Section 4 - Security What is WP A? WP A, or Wi-Fi Protected Access, is a Wi-Fi standard that was designed to improv e the secur ity f eatures of WEP (Wired Equiv alent Pr iv acy). The 2 major improv ements ov er WEP: • Improv ed data encr yption through the T emporal K e y Integ rity Protocol (TKIP).
51 D-Link WBR-2310 User Manual Section 4 - Security Configure WEP It is recommended to enable encryption on yo ur wireless router bef ore your wireless netw or k adapters . Please estab lish wireless connectivity bef ore enab ling encr yption. Y our wireless signal ma y degr ade when enabling encr yption due to the added ov erhead.
52 D-Link WBR-2310 User Manual Section 4 - Security Configure WP A-PSK It is recommended to enable encryption on yo ur wireless router bef ore your wireless netw or k adapters . Please estab lish wireless connectivity bef ore enab ling encr yption. Y our wireless signal ma y degr ade when enabling encr yption due to the added ov erhead.
53 D-Link WBR-2310 User Manual Section 4 - Security Configure WP A (RADIUS) It is recommended to enable encryption on yo ur wireless router bef ore your wireless netw or k adapters . Please estab lish wireless connectivity bef ore enab ling encr yption.
54 D-Link WBR-2310 User Manual Section 5 - Connecting to a Wireless Network Connect to a Wireless Network Using Windows ® XP Windows ® XP users ma y use the b uilt-in wireless utility (Zero Configuration Utility). The f ollowing instr uctions are f or Ser vice P ac k 2 users.
55 D-Link WBR-2310 User Manual Section 5 - Connecting to a Wireless Network Configure WEP It is recommended to enab le WEP on y our wireless router or access point bef ore configuring your wireless adapter . If y ou are joining an e xisting network, you will need to kno w the WEP k e y being used.
56 D-Link WBR-2310 User Manual Section 5 - Connecting to a Wireless Network 3. The Wir eles s Net wo rk Co nn ec ti on bo x wil l app ea r . En te r the same WEP k e y that is on y our router and clic k Connect . It ma y tak e 20-30 seconds to connect to the wireless network.
57 D-Link WBR-2310 User Manual Section 5 - Connecting to a Wireless Network Configure WP A-PSK It is recommended to enab le WEP on y our wireless router or access point bef ore configuring your wireless adapter . If y ou are joining an e xisting network, you will need to kno w the WEP k e y being used.
58 D-Link WBR-2310 User Manual Section 5 - Connecting to a Wireless Network 3. The Wireless Netw ork Connection bo x will appear . Enter the WP A-PSK passphrase and clic k Connect . It ma y tak e 20-30 seconds to connect to the wireless network. If the connection f ails, please v erify that the WP A-PSK settings are correct.
59 D-Link WBR-2310 User Manual Section 6 - T roubleshooting T roubleshooting This chapter provides solutions to problems that can occur dur ing the installation and operation of the WBR-2310. Read the f ollowing descriptions if you are having prob lems.
60 D-Link WBR-2310 User Manual Section 6 - T roubleshooting • Configure y our Inter net settings: • Go to Star t > Settings > Control Panel . Double-clic k the Internet Options Icon. F rom the Security tab , clic k the b utton to restore the settings to their def aults.
61 D-Link WBR-2310 User Manual Section 6 - T roubleshooting 3. Why can’t I connect to certain sites or send and receive emails when connecting through m y router? If you are having a prob lem sendin.
62 D-Link WBR-2310 User Manual Section 6 - T roubleshooting Y ou should star t at 1472 and wor k y our wa y down by 10 each time . Once you get a reply , go up b y 2 until you get a fragmented pack et. T ake that v alue and add 28 to the value to account f or the v arious TCP/IP headers .
63 D-Link WBR-2310 User Manual Appendix A - Wireless Basics D-Link wireless products are based on industr y standards to pro vide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks.
64 D-Link WBR-2310 User Manual Appendix A - Wireless Basics What is Wireless? Wireless or Wi-Fi technology is another wa y of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly , so you hav e the freedom to connect computers an ywhere in y our home or office network.
65 D-Link WBR-2310 User Manual Appendix A - Wireless Basics Wireless P ersonal Area Netw ork (WP AN) Bluetooth is the industr y standard wireless technology used f or WP AN.
66 D-Link WBR-2310 User Manual Appendix A - Wireless Basics Where is wireless used? Wireless technology is e xpanding e v er ywhere not just at home or office. P eople like the freedom of mobility and it’ s becoming so popular that more and more pub lic f acilities now provide wireless access to attract people.
67 D-Link WBR-2310 User Manual Appendix A - Wireless Basics Security Don’t let y ou ne xt-door neighbors or intruders connec t to your wireless netw or k. Secure your wirel ess netw ork by turning on the WP A or WEP secur ity f eature on the router .
68 D-Link WBR-2310 User Manual Appendix B - Networking Basics Networking Basics Check your IP address After y ou install your new D-Link adapter , b y def ault, the TCP/IP settings should be set to obtain an IP address from a DHCP ser v er (i.e. wireless router) automatically .
69 D-Link WBR-2310 User Manual Appendix B - Networking Basics Statically Assign an IP address If you are not using a DHCP capable gate wa y/router , or you need to assign a static IP address, please follo w the steps below: Step 1 Windows ® XP - Clic k on Star t > Contr ol Panel > Netw ork Connections .
70 D-Link WBR-2310 User Manual Appendix C - T echnical Specifications T echnical Specifications Standards • IEEE 802.11g • IEEE 802.11b • IEEE 802.
71 D-Link WBR-2310 User Manual Appendix C - T echnical Specifications External Antenna T ype Single detachable re v erse SMA LEDs • P ow er • W AN • WLAN • LAN (10/100) Operating T emperature 32°F to 131°F ( 0°C to 55°C) Humidity 95% maximum (non-condensing) P ower Input Ext.
72 D-Link WBR-2310 User Manual Appendix D - Contacting T echnical Support Contacting T echnical Support D-Link provides free technical suppor t for customers within the United States and within Canada f or the duration of the warr anty per iod on this product.
73 D-Link WBR-2310 User Manual Appendix E - Warranty W arranty Subject to the ter ms and conditions set f or th herein, D-Link Systems, Inc. (“D-Link”) provides this Limited W arranty: • Only to.
74 D-Link WBR-2310 User Manual Appendix E - Warranty Limited Software W arranty: D-L ink wa rra nts that the sof twa re por ti on of the pro duct (“Sof twa re”) will su bst anti all y con fo r m t.
75 D-Link WBR-2310 User Manual Appendix E - Warranty • After an RMA number is issued, the defectiv e product m ust be pac kaged securely in the original or other suitable shipping package to ensure that it will not be damaged in transit, and the RMA n umber m ust be prominently mar k ed on the outside of the pac kage.
76 D-Link WBR-2310 User Manual Appendix E - Warranty IF ANY IMPLIED W ARRANTY CANNO T BE DISCLAIMED IN ANY TERRIT OR Y WHERE A PRODUCT IS SOLD , THE DURA TION OF SUCH IMPLI ED W ARRANTY SHALL BE LIMITED T O THE DURA TION OF THE APPLICAB LE W ARR ANTY PERIOD SET FOR TH ABO VE.
77 D-Link WBR-2310 User Manual Appendix E - Warranty CE Mark W arning: This is a Class B product. In a domestic environment, this product ma y cause radio interf erence, in which case the user ma y be required to take adequate measures .
78 D-Link WBR-2310 User Manual Appendix F - Registration V ersion 1.00 12/09/2005 Product registration is entirely v oluntar y and failure to complete or retur n this form will not diminish y our warranty rights.
デバイスD-Link WBR-2310の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
D-Link WBR-2310をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはD-Link WBR-2310の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。D-Link WBR-2310の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。D-Link WBR-2310で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
D-Link WBR-2310を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はD-Link WBR-2310の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、D-Link WBR-2310に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちD-Link WBR-2310デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
