AiphoneメーカーIS-SOFT 514426 A 0611YZの使用説明書/サービス説明書
ページ先へ移動 of 18
IS SERIES Commer cial & Secur ity IP Video Inter com system IS-SOFT PC Master Station SETTING MANU AL 514426 A 061 1YZ Thank you for selecting Aiphone for your communication and security needs. Please read this manual and the separate “OPERA TION MANUAL” carefully before setting and using this system.
2 CONTENTS INTRODUCTION .......................... 2 UNP ACKING ................................ 2 GETTING ST ARTED ........................... 3 SYSTEM CONFIGURA TION EXAMPLE .................................... 3 CONNECTIONS ........................
3 GETTING STARTED SETTING THE PC MASTER STATION SYSTEM CONFIGURA TION EXAMPLE A PC master station can be used in either a standard (IP) system or a network direct system. A standard (IP) system consists of IP control unit(s), IP stations and local system(s).
4 CONNECTIONS Connect a PC on which you will install the IS-SOFT application to an IP network via a switch or hub. CA T5e/6 100m (330') RJ45 RJ45 RJ45 RJ45 Pair4 Pair3 12345678 12345678 Pair2 Pair1 T568A Pair4 Pair2 Pair3 Pair1 T568B Notes on CA T5e/6 cables Do not bend the cables to an extent where the radius is less than 25 mm (1”).
5 GETTING STARTED SETTING THE PC MASTER STATION INST ALLING THE IS-SOFT Install the IS-SOFT on your PC from the DVD supplied with this product. Y ou may need to log on to your PC as the Administrator to install the IS-SOFT . * System requirements for PC Y our PC must meet the following system requirements to use the IS-SOFT .
6 Installing Insert the DVD into your PC. 1 Click "English" on the language selection screen. 2 Select "IS-SOFT" 3 "PcApplication", and then follow the on-screen instructions to install. NO TES: If ".NET Framew ork" is not already installed, the .
7 GETTING STARTED SETTING THE PC MASTER STATION SETTING THE PC MASTER STATION OUTLINE OF SETTINGS After installation of the IS-SOFT on the PC has fi nished, make the settings for the PC master station before using it. Make the settings by following the steps below .
8 MAKING THE SETTINGS The following describes the settings that can be made on the PC master station windows. First of all, start up the PC master station. Setting procedure The settings are made on the V olume control window and Setting window . First open either window from the Main window , and then make the settings displayed on the window .
9 GETTING STARTED SETTING THE PC MASTER STATION Setting list NO TES: The following list is a brief o vervie w of the setting items av ailable in the settings on the Setting window . The descriptions, and the style and • order of descriptions do not necessarily equate with the actual displays.
10 Adjusting volumes NO TES ON VOLUME ADJUSTMENT When talking, if you cannot hear audio from the target door station • or master station ev en after turning up the speaker v olume, try turning down the microphone v olume gradually . (The PC master station uses a hands-free system.
11 GETTING STARTED SETTING THE PC MASTER STATION Making preference settings Make the preference settings on the Setting window as shown below . Select the [Preference 1] or [Preference 2] tab and make the setting in the respective window . (See below for details about the settings.
12 ■ Setting on [Preference 2] Select the [Preference 2] tab in the Setting window . 1 [C] Display [Display language]: Select the language for displaying on the PC master station. [Un-answered call display]: Set whether or not to display the record of incoming call(s) automatically .
13 GETTING STARTED SETTING THE PC MASTER STATION ■ Searching for a station, zone or remote site from the SEARCH LIST Y ou can select a station, zone or remote site registered to the system by using one of the search items in the SEARCH LIST . Click 1 repeatedly to select the target search item A to F (so that it is highlighted).
14 A Searching for a station or zone in your site by entering the name [NAME SEARCH] Select [NAME SEARCH] from the SEARCH LIST . 1 ( → P . 13) Click 2 to display the Dial keys window . Enter a name by using the dial keys. 3 e.g.) When searching for "MASTER004"; Click the dial keys as follows.
15 GETTING STARTED SETTING THE PC MASTER STATION B Searching for a station in your site by designating an area [ST A TIONS BY AREA] Select [ST A TIONS BY AREA] from the SEARCH 1 LIST . ( → P . 13) Click 2 to select the target area in your site from the list (so that it is highlighted), and then click to select.
16 Making transfer settings Y ou can transfer a received call to another master station, another site or a telephone number . NO TE: This setting can be made only when the System setting on a PC has been completed. Select the [T ransfer] tab on the Setting window .
17 GETTING STARTED SETTING THE PC MASTER STATION Making privacy setting Setting of the privacy function is available when called from another master station. When the privacy mode is activated, the microphone turns off and you will not be heard by the caller .
AIPHONE CO., LTD., NAGOYA, JAPAN AIPHONE CORPORATION, BELLEVUE, WA, USA AIPHONE S.A.S., LISSES-EVRY, FRANCE http://www.aiphone.net/.
デバイスAiphone IS-SOFT 514426 A 0611YZの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Aiphone IS-SOFT 514426 A 0611YZをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAiphone IS-SOFT 514426 A 0611YZの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Aiphone IS-SOFT 514426 A 0611YZの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Aiphone IS-SOFT 514426 A 0611YZで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Aiphone IS-SOFT 514426 A 0611YZを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAiphone IS-SOFT 514426 A 0611YZの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Aiphone IS-SOFT 514426 A 0611YZに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAiphone IS-SOFT 514426 A 0611YZデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
