DatamaxメーカーMP NOVA4 DTの使用説明書/サービス説明書
ページ先へ移動 of 60
User M a nu a l MP Nova Di rect T h ermal T h ermal T ran sfer M P No v a4 DT M P N ov a4 TT M P No v a6 DT M P N ov a6 TT M P No v a8 DT.
Table of Contents User M a nu a l 1. Int rod uct ion 2. Sa fe ty 3. P rod uct P rese nta t io n 4. P rod uct Ov e rv i ew 4.1 I n t he B o x 4.2 P ri n ter P arts M P No va4, 6 & 8 DT 4.3 Open i n g an d Cl o s in g th e C over of MP N o va4 , 6 & 8 D T 4.
1. Introduction Cond it i o ns © Co py righ t D atam a x Co rpo rati o n 20 06 T h e M P No v a prin t ers w it h t heir uni q u e tec hn o l o gy h av e bee n d eve lo ped to o ff er a range o f diff eren t a pp licati o n s. T h a n k yo u f o r ch o osi n g an D atam ax pri n t er fo r yo u r bu si ness n e eds.
2. Safety S a f e ty & C e rt if ic at io n S afet y Requi r ement s Dat ama x di sc lai ms a l l res po n sibi l i ty r egar di n g t he CE direct ive i f th e p r i n t e r i s u s e d , al te r e d or i n s tall e d i n an y w a y oth e r t h an descri bed i n t h i s m a nu a l.
2. Safety S a f e ty & C e rt if ic at io n • T h e p ri n ter s h o uld be co nnecte d t o the po w e r s u p pl y in di ca ted o n t h e vo l tage p l ate. If yo u are uns u re o f th e type o f po w er s upp l y avai la ble, p le ase co n t ac t Data ma x serv ice pe rs o nnel.
2. Safety S a f e ty & C e rt if ic at io n M achi ne S i gn Cer t ifi cati on and Appr ov al s.
2. Safety S a f e ty & C e rt if ic at io n T h e M P No v a prin t ers a re ce rti f ied in acco rda n ce w i th th e r equ ir em en t s for CE m a rk in g .
3. Product Presentation Th e M P N ova Se ri es Dat ama x ac hi eves div e rsit y w i t h i ts t herm a l pri n t ers , t he M P seri es. P o w erf ul a n d i nte l l ige n t w it h a m ult it u de o f f un cti o n a lity y ou w o u l d n ot ex pe c t fr om on e of t h e s m al l e st p r in te r s o n th e marke t.
4. Product Overview 4.1 In t he B o x M P N ov a4 DT & M P N ova6 DT T h e f o l lo w i ng i tems s h o ul d be i n c l u d ed i n t he bo x whe n yo u rec ei ve yo u r n e w M P N o va4 DT o r MP No v a6 D T prin t er: 1. 1 x M P No va4 D T o r M P N o v a6 DT 2.
4. Product Overview 4.1 In t he B o x M P N ov a4 T T & M P Nov a6 T T T h e f o l lo w i ng i tems s h o ul d be i n c l u d ed i n t he bo x whe n yo u rec ei ve yo u r n e w M P N o va4 T T o r M P N o va6 T T pri n ter: 1. 1 x M P No va4 TT o r M P N o v a6 TT 2.
4. Product Overview 4.1 In t he B o x M P N ov a8 DT T h e f o l lo w i ng i tems s h o ul d be i n c l u d ed i n t he bo x whe n yo u rec ei ve yo u r n e w M P No va 8 DT prin t e r: 1. 1 x M P No va8 D T 2. 1 x Cl e an in g c l oth 3. 1 x C o mm un i cati o n cab l e (S eria l RS 232 ) 4.
4. Product Overview 4.2 MP No v a4 , 6 & 8 D T – Pr i n te r P art s 1. P rin t b u tto n 2. S tatu s lamp (LE D ) 3. Co ver 4. M edi a ro l l 5. Ro l l st eeri n g 6. R o l l g u i de l o ck 7. M edi a trac k 8. H and l e 9. C o mmun i ca ti o n po rts 10.
4. Product Overview 4.2 MP No v a4 , 6 & 8 D T – Pr i n te r P art s 15. P rin t head 16. P rin t ro ll 17. Me d ia Pos i t i on i n g S en s or (M PS) 18.
4. Product Overview 4.3 Ope ning a nd C lo sin g t h e C o ver O pen M P N ova4, 6 & 8 DT 1. Pu ll h andl e . 2. Open co ver ..
4. Product Overview 4.3 Ope ning a nd C lo sin g t h e C o ver Cl os e M P N ova4, 6 & 8 DT 1. Cl o se co ve r. 2. F o l d ha n d l e . ( P r i nt he a d w i ll be e n g aged. ) No te: M a k e s ure t he h a nd l e is fo l ded a ll t he w ay do wn.
4. Product Overview 4.4 MP No v a4 & 6 T T – Pr in t er Part s 1. Prin t b u tto n 2. S tatu s l amp (LED ) 3. Fr o n t co ver 4. Rear co ver 5. M edia ro ll 6. Ro ll g u i de lo ck 7. Ro l l ste er i n g 8. M edia trac k 9. H and l e 10. Ink ribbo n g u i d e 11.
4. Product Overview 4.4 MP No v a4 & 6 T T – Pr in t er Part s 13. Co mmun i cati o n po rt s 14. Un ro l l s h af t 15. P o w er co nn ec tio n 16.
4. Product Overview 4.5 Ope ning a nd C lo sin g t h e C o ver O pen M P N ova4 & 6 T T 1. Ope n c o ver. T h e i nner c o ver sl ides au to ma tica lly u p to geth e r w it h t he co v er.
4. Product Overview 4.5 Ope ning a nd C lo sin g t h e C o ver Cl os e M P N ov a4 & 6 T T 1. Cl o se co ve r. Th e i nn er cover sl ides au to ma tica lly do wn to geth e r w it h t he co v er.
5. Getting Started 5.1 Ov er vi e w M P N ov a4, 6 & 8 DT M P N ov a4 & 6 T T 1. In s ert m edia, M P No va4 & 6 DT , see c h apt er 5. 3.1 1. In s ert m edia. S ee M P N o va4 & 6 D T ( n o 1) i n t h e l e f t co l um n . 2. In s ert i nk ri bbo n , s ee c hapte r 5.
5. Getting Started 5.2 Ov er vi e w Pee l -Off M P N ov a4 & 6 DT P eel - Off M P N ov a4 & 6 T T P eel - O ff 1. In s ert p ee l -o f f media, s ee c h apt er 5. 4 1. In s ert p ee l -o f f media. S ee M P N o va4 & 6 DT Peel-o ff (n o 1) i n t he lef t co l um n .
5. Getting Started 5.3.1 Insert i n g Med i a MP N o v a4 & 6 Note: T h e pi ct ures s h o w n des c ribe a n M P Nova4 DT . T h e pro ces s w o rk s j ust t h e s ame f o r MP Nov a6 DT an d M P N o v a4 & 6 TT . 1. Un do t h e roll g u id e lock .
5. Getting Started 5.3.1 Insert i n g Med i a MP N o v a4 & 6 7. Lo c k t h e ro l l g u id e lo ck (t ur n the h a nd le c l o ck w is e). T h e ro l l s teeri ng s h a l l g uide t he ro l l, b u t s ha ll n o t be tig h t .
5. Getting Started 5.3.2 Insert i n g Med i a MP N o v a8 DT Adj us t ing t he Fan- Fol d S t eer i ng Note: It is o nl y n ec essary to ad ju s t t h e f an -f o ld steeri ng w h e n c h a ngi n g media ty p e. 1. A n A l le n k ey (2 m m) is mo un te d un d er n e at h t he f an- fo ld steeri ng.
5. Getting Started 5.3.2 Insert i n g Med i a MP N o v a8 DT Ins er t i ng M edi a 1. P ull h a nd l e to l if t t h e p ri n t h e ad f ro m t h e ro l l e r. 2. Ins ert t he me di a t hro u g h t h e f an -f o ld steeri ng a nd t h ro u g h the pri n t er.
5. Getting Started 5.3.2 Insert i n g Med i a MP N o v a8 DT 3. Pu ll ou t s om e of t h e m e d i a. 4. Fo ld t h e h a ndl e (t he pri nt h e ad f ol d s a u to mat ical l y o n to t he ro ll e r). 5. Pr e ss th e pr i n t bu t t on a fe w ti mes un t i l t he pri nter auto mati ca l l y f in ds t he co rrec t po sit io n o f th e medi a.
5. Getting Started 5.4 Ins e rt i n g Med i a – P ee l -Of f K i t Note: T h e pi ct ures s h o w n des c ribe a n M P Nov a4 DT P eel -O ff . T h e pr ocess w o r k s ju st t he sa m e f or M P Nov a4 & 6 T T Peel -O ff & M P Nov a6 DT P eel -O ff .
5. Getting Started 5.4 Ins e rt i n g Med i a – P ee l -Of f K i t 6. Ope n t he re w i n d un it s l o t by tur n i n g t he kn o b c lo ckwise wh i l e h o ldi n g t he c y l i n de r f i rml y. 7. S l i de t he bac k i ng pap er i n to the re wi nd un it s l o t.
5. Getting Started 5.4 Ins e rt i n g Med i a – P ee l -Of f K i t 8. C l o se t h e re wi n d un it slo t by tur n i n g t he kn o b co unt er- clo ckwise wh i le h o ldi n g t h e cyli n de r a nd bac k i ng pap er f i rml y. 9. R o l l t he bac k i ng pap er aro und t h e re wi n d uni t by tur n i n g t he kn o b co unt er- cl o ckw ise.
5. Getting Started 5.5 Ins e rt i n g Ink Ribbo n – MP No va 4 & 6 T T 1. U n do t h e ha n d l e a n d o pe n the cover. 2. R emo ve the o ld i nk ribbo n . 3. S l i de t he n e w i nk ribbo n o n to th e spo o l . 4. Feed t he i nk ri bbo n unde r the pri n t h ea d.
5. Getting Started 5.5 Ins e rt i n g Ink Ribbo n – MP No va 4 & 6 T T 5. Not e: T h e i nk ri bbo n m u s t n o t pass unde r t h e M P S (M edia P o si ti o n i n g S e n s o r). 6. M o v e th e em p ty r o ll , wh ic h w i ll co llect t he u se d i nk ribbo n , up a nd aro un d t h e pri n t h e ad.
5. Getting Started 5.5 Ins e rt i n g Ink Ribbo n – MP No va 4 & 6 T T 8. Fo l d t h e h a ndl e. 9. P re ss t h e p ri n t b utto n . T h e ink rib bo n w i ll a ut o ma ticall y w i n d aro und t he re wi n d spo o l , thu s te n si on i ng t he ink ribbo n.
5. Getting Started 5.6 Co nnec t in g No te: T h i s pro cess w o r k s f o r a ll the M P No va prin te rs. 1. Ma k e s u re th e p r i n t e r is s w i t ch ed of f ( t h e p ow e r sw i tc h is s et to ‘ 0’). 2. C o nn ec t t he co mm un ic atio n cable f ro m th e PC to th e pri n ter.
5. Getting Started 5 . 7 T e s t Prin t & Sens or A u t o Ad j u s t m en t T o be su re t he p ri n ter i s w o rki ng, a nd to ad j u s t t he me dia po sitio n in g s e n so r, M PS, to th e media, ma k e a test p ri n to u t: 1. Switc h o ff th e p ri n te r.
4. Operation 4.1.
6. Operation 6.2 In te rpr et in g t he S tat us Lam p - LED Red E n d o f medi a ro ll, e n d o f ink ribbo n o r t he h a ndl e is n o t fo l ded do wn.
6. Operation 6.3 Me dia P o sit i o nin g Se ns or Set ti ng s S enso r m ode Ap prox imat e sen so r r ea d ing po i n t, f ro m e dge of me d ia. 1. O u ter ( d e f ault) 16 mm 2. I nn e r 5 mm 3. Bl ac k m ark 5 mm T h e M P No v a prin t ers a re eq ui ppe d w i t h media po s iti o n i n g se n s o rs (M P S).
6. Operation 6.4 A dj us t in g t he Pr in t H ead Adj us t ing P r int H ead P os i t i on Note: Th e s e adj u s t men t s ar e on l y n ec es sary w he n c ha n gi n g to media w i t h di f f ere n t t h ic knes s o r w i dt h. T h e pic tures s h o wn des c ribe a n MP No v a4 DT .
6. Operation 6.4 A dj us t in g t he Pr in t H ead 6. N o te: M P N ov a4 DT only . On t h e M P No va4 D T th e po si tio n of th e p ri n t h e ad it se l f can be c ha n ge d. As def a ul t t h e re is a 3 mm n o n - pri n t ab l e a rea o n the lef t side.
7. Maintenance Clea ning t he P r in t H ea d a nd Ro ller On l y u s e cl ean in g c l ot h s fr om Ima j e. T h es e are sp eci a ll y desig ned f o r clea n i ng I ma je t herma l pri n te rs .
8. Troubleshooting T o Begi n W i th Wh e n tro ubles h o o tin g t he No va pr i n te r, it i s n ec essary to n a rro w do wn t he vari o u s po ssi ble ca u s es o f f au l t s : do es t h e pri n .
8. Troubleshooting T es t M et hod 1 A printo u t us i n g test met h o d 1 s h o w s t h e p r i n t e r ’ s p a r am e t er s an d s e t t i n g s , for ex a mp le: date, ti me, p ro gram v e rsio n, co m m un ica tio n set ti n gs a nd wh ic h typef aces are av ail ab l e.
8. Troubleshooting T es t M et hod 2 No te: T h i s me th od is on l y for a d v an c e d t r ou bl e s h oot i n g b y s e r v ice t e ch n i c ian s.
8. Troubleshooting T r oubl es hoot ing S ch edul e St at u s E rro r Measu re No p rin to u t Ö T h e p ri n t h e ad is n o t i n po sitio n (stat u s la m p is r e d) Ö Ch ec k t h e lev el, f o l d do w n the pri n t h ea d (D T , T T) Ö In co rrec t medi a Ö Ch ec k t h e m edi a, rep l ac e media (c hapte r 5.
9. Changeable Parts 9.1 Rep lac ing t h e R ol ler Note: T h e pi ct ures s h o w n des c ribe a n MP N o v a 4 DT . T h e pro c ess w o rk s j ust t h e s ame f o r all M P No va p r i nte r s . 1. C h ec k t h at t he p ri n ter is tur n ed o f f an d o pe n t he co v er (chapte r 4.
9. Changeable Parts 9.1 Rep lac ing t h e R ol ler 6. P ay caref ully at te n ti o n to the driv e be l t w he n r emo v ing the l ef t- h a n d e n d o f t h e ro l ler f ro m the pri nter.
9. Changeable Parts 9.1 Rep lac ing t h e R ol ler 8. I n se r t th e l e ft -h an d en d of the ro l l e r (t he e n d wit h t h e co g w h ee l). C h ec k t hat it f i ts in s ide t h e driv e b elt.
9. Changeable Parts 9.1 Rep lac ing t h e R ol ler 9. Ins ert t he ri g ht- h a nd e nd o f the rol l e r i n to po sitio n . 10 . P u s h t h e l ef t-ha n d e nd o f the ro l l e r do wnwa rds i n to the n o tc h un ti l t he ro lle r is para lle l wit h t he ed ge o f t h e pri nter.
9. Changeable Parts 9.1 Rep lac ing t h e R ol ler 11 an d 12 P u s h t he ro lle r sl i gh t ly to t h e lef t so th at t he l e ft -h an d en d s l ot s in to th e gro o ve. 13. C l o se t h e co v er (c hapte r 4.3 DT o r 4.5 T T ). 14. Sw i t ch on t h e pr in t er .
9. Changeable Parts 9.2 Rep lac ing t h e P r int Head Note: T h e pi ct ures s h o w n des c ribe an MP N o v a 4 DT . Th e pro cess w o rk s j ust t h e s ame f o r all M P No va p r i nte r s . 1. Ma k e su re t h e p r i n te r is tur n ed o f f an d o pe n t he co ver .
9. Changeable Parts 9.2 Rep lac ing t h e P r int Head 4. Caref ul l y re mo v e t h e p ri nt h e ad. 5. Caref ul l y re mo v e t h e cabl es f ro m th e bac k o f th e pri n t h e ad. No te: T h e re is a “b u tto n ” o n to p of th e rig ht cab l e.
9. Changeable Parts 9.2 Rep lac ing t h e P r int Head 6. Un p ac k t h e ne w pri nt h ea d and att ac h t h e cab les to the n e w p ri n t head. Rememb e r to h a n d l e t h e p ri n t h e ad w i t h c are! 7. Care f ull y i n se r t t h e pr i n t h e ad i n to po sitio n .
9. Changeable Parts 9.2 Rep lac ing t h e P r int Head 8. C h ec k t h at t he late ra l po si tio n h as n o t c ha n ge d. 3 mm is t he def a ul t po sition . No t e: O nly ad ju st ab l e o n M P N ov a 4 DT. 9. H o l d t h e p ri n t h e ad i n pl ac e a n d tig h te n t h e f i n ger nut.
10. Printer Options and Spare Parts 10.1 P ri n te r Opt io ns Pe el-Of f Ki t MP Nova4 & 6 DT, MP Nova4 & 6 TT I t em numbe r: 5335 41 N ov a4 533542 Nov a6 T h e pe e l-o ff devi ce separa t es the l abe l s f ro m t h e b ac k i n g paper, w hic h i s ro lle d u p be h i n d the pri n t er.
10. Printer Options and Spare Parts 10.1 P ri n te r Opt io ns 215 mm K i t MP Nova4 & 6 DT, MP Nova4 & 6 TT I t em numbe r: 5336 15 T h e 21 5 mm Ki t ma k es it po ss ibl e to u s e me dia ro l l s wit h diamet e rs u p t o 215 mm.
10. Printer Options and Spare Parts 10.2 S par e Part s Cons umables Pa r t nu mb e r D escr ipti o n 501933 501934 501935 501936 501937 501938 1. 10 x C lea n i ng c l o th s (4") 1. 50 x C lea n i ng c l o th s (4") 1. 10 x C lea n i ng c l o th s (6") 1.
11. Consumables Med i a Ge nera l S el f -ad h esi ve labe ls a re bac ked wit h s i l i co n-co ated bac k i ng paper, f ro m w hic h t he labe l i s remo ved. T h er e are dif f eren t types o f adh es ive: • T ickets ar e pri n t ed o n n o n-ad hesi ve pa per, w h i c h me a n s there i s n o n e ed f o r back i ng pap er.
12. Technical Specifications MP No v a 4 DT & TT Dime n sio n s (H x W x L) DT : 150 x 232 x 360 mm ( 6” x 9 ⅛ ” x 1 4 ⅛ ”) T T : 210 x 2 50 x 36 0 mm (8¼ ” x 9 ½” x 1 4 ⅛ ”) We igh t DT : 5.
12. Technical Specifications MP No v a 6 DT & TT Dime n sio n s (H x W x L) DT : 150 x 292 x 360 mm ( 6” x 1 1½” x 14 ⅛ ”) T T : 210 x 3 10 x 36 0 mm (8 ⅓ ” x 11 ⅞ ” x 14 ⅛ ”) Wei gh t DT : 6.
12. Technical Specifications MP No v a 8 DT Di me n s io n s (H x W x L) DT : 150 x 345 x 360 mm ( 6” x 1 3 ½ ” x 14 ⅛ ”) Wei gh t DT : 7.0 kg (15 ,5 l bs ) P o w er pac k 100/24 0V AC 50-60 .
デバイスDatamax MP NOVA4 DTの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Datamax MP NOVA4 DTをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはDatamax MP NOVA4 DTの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Datamax MP NOVA4 DTの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Datamax MP NOVA4 DTで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Datamax MP NOVA4 DTを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はDatamax MP NOVA4 DTの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Datamax MP NOVA4 DTに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちDatamax MP NOVA4 DTデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
