Datamax O'NeilメーカーCompact 4の使用説明書/サービス説明書
ページ先へ移動 of 20
A26618-A ENG Operators guide ENGLISH - 1 6 4 1 2 3 5 7 8 9 MP Compact4 10 11 4 9 12 13 Overview 1. F ront co v er 2. T op co ver 3. Media roll 4. R oll guide 5. Status lamp 6. Print button 7. Print roller 8. Release le ver 9. Paper path 10 . Spindle 11 .
A26618-A ENG MP Compact4 Mobile 14 . Roll guide 15. Spool 16. Locking handle 17 . Communication port s 18. P ower connection 19. P ower switch 20. Lock plat e 21.
A26618-A ENG Safety instructions This symbol is used t o notify t he r eader of situations requiring special attention. • Ensur e t hat t he pow er switch is of f when connecting t o t he socket. The user is only authorized to carr y out tasks which are co vered by this manual.
A26618-A ENG Connection T o a computer or ser v e r 1. COM1 2. COM2 3. USB 4. Ether n et/L AN 5. P ow er switch 6. P ow er connection Before connecting an y cables t o t he printer ensure that the power cable is not connect ed. The printer is eq uipped with serial connections: 300-115 000 baud (COM 1, COM 2).
A26618-A ENG Changing media Base model The printer stops aut omatically when it is out of media. This is indicated b y an LED, the status lamp will indicate red. - T urn the release leve r t o lif t t he printhead. - Remo v e t he r oll guide and t he em pty media spool if applicable.
A26618-A ENG Printer equipped with cutter - Pull out t he locking pin. - Fold do wn t he cutter . • Follow the instructions for t he base model. - Feed the end of the media roll t hrough the cutt er . - Pull out t he locking pin and fold back the cutter .
A26618-A ENG Pr inter with P eel-Off kit F ollow the instructions for t he base model. - R emo ve s everal labels from the carr ier paper . Feed the media - behind the lower part of the front cover - through the reeling pins - Pull the reeling de vice counter- clockwise in or der t o increase tension of the carrier paper.
A26618-A ENG Base model - T urn t he release lever to lift t he printhead. - Remo ve the media roll. • Use the special cleaning cloths provided. - Feed in the clo th in the same manner as the media. - T urn t he release lever to PRINT . - Hold on to the cloth.
A26618-A ENG Changing the roller Base model - Open the front co ver . - Lift up the top cover by pr essing carefully with a pen or similar on t he catch. - Loosen the locking plug. - Press on the roller with you r t humb and mo v e it t o t he lef t. - Lift out t he right hand part of the roller .
A26618-A ENG W ar ning! Bef ore beginning any w o rk on the printer ensure t hat the power cable is no t connected. - Open the printer . - T urn the r elease le ver to PRINT . - Remo ve the retaining scre w . - Press car efully on the front part of the head so that the two scre w heads become fr ee.
A26618-A ENG Adjusting the print head pressure Adjusting the pressure of the print head is necessar y when using different types of media, e.g. labels, paper or tick ets.
A26618-A ENG 150 mm kit This accessor y makes it possible t o use a 150 mm media roll instead of a standard 100 mm roll. Mounting - U nscrew the existing spindle. - Install your 1 50 mm kit. - Screw on t he ne w spindle. P eel-Off kit The P eel-Of f accessor y separates lables from their carr ier paper .
A26618-A ENG Accessories W all mounting Enables w all mounting of the print er . - Secure the mounting plate on the under side of the pr inter . - Scr e w the guide securely t o the wall plate. - Mount the w all plat e. - Hang up the printer . L TS kit Label T ak en Sensor, is mos t often used t o gether wit h the Peel-Off kit.
A26618-A ENG Accessories Print Head Diagnostic (PHD) Printers with an article number of 645130.02 or later can be equipped with PHD-Print Head Diagnostic. PHD w arns against missing dots on the print head. PHD requires Labelpoint 4.49 or later versions.
A26618-A ENG Accessories Parallel cable The par allel cable con verts data from parallel t o ser ial communication. The MP Compact4 is not equipped with a parallelport, but wit h the help of the cable, information can be sent via the com puter’s parallel port.
A26618-A ENG Connection Important information! The DC supply cable from the batter y to the printer mus t not be placed closer than 50 cms to any other interface, e.g. radio ant ennas and communication cables wit h high noise levels. Alternatively , use a shielded DC-supply cable.
A26618-A ENG V er tical mounting of the MP Compact4 Mobile Mount the bott om plate on the w all with the guide in t he left corne r . When mounting the printer ve rti- cally it can be hung - side wa y.
A26618-A ENG Battery power supply Choosing the battery power supply Printer usage de termines the choice of batter y power suppl y . The batter y capacity is count ed in amper e-hours (AH) and is dete.
A26618-A ENG Power consumption Example In an application t he f ollo wing has been determined - 50 labels per hour - Label length 200 mm - Print speed 60 mm/s wit h a black/white-balance of 25 % .
A26618-A ENG T roub le shooting Problem Measure The prin t ed i tem is greyish Clean the print head and the roller . Check - paper quality . See “P aper P ar ameter Settings” in the printer’s bro wser . The print ed item is uneven Check - mechanical adjustments.
デバイスDatamax O'Neil Compact 4の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Datamax O'Neil Compact 4をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはDatamax O'Neil Compact 4の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Datamax O'Neil Compact 4の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Datamax O'Neil Compact 4で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Datamax O'Neil Compact 4を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はDatamax O'Neil Compact 4の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Datamax O'Neil Compact 4に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちDatamax O'Neil Compact 4デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
