Dellメーカー1300の使用説明書/サービス説明書
ページ先へ移動 of 44
Dell™Inspiron™1300/B120/B130ServiceManual Before You Begin Hinge System Components Battery Memory, Optical Drive, and Mini PCI Card Hard Drive Keyboard Display Assembly Palm Rest Mo.
Back to Contents Page Antenna Dell™Inspiron™1300/B120/B130ServiceManual Replacing the Antenna Replacing the Antenna 1. Follow the instructions in Before Working Inside Your Computer . 2. Remove the hard drive.
Back to Contents Page 1 antenna cable 2 guides .
Back to Contents Page Base Plastics Dell™Inspiron™1300/B120/B130ServiceManual 1. Follow the instructions in Before Working Inside Your Computer . 2. Remove the hard drive. See Removing the Hard Drive . 3. Remove the optical drive.
Back to Contents Page Battery Dell™Inspiron™1300/B120/B130ServiceManual Replacing the Battery Replacing the Battery To remove the battery: 1. If the computer is connected to a docking device (docked), undock it.
Back to Contents Page Before You Begin Dell™Inspiron™1300/B120/B130ServiceManual Recommended Tools Turning Off Your Computer Before Working Inside Your Comp.
3. Disconnect any telephone, network, and USB cables from the computer. 4. Disconnect your computer and all attached devices from their electrical outlets. 5. Turn over the computer. 6. Remove the battery. a. Slide the battery - bay latch release lock on the bottom of the computer away from the battery.
Back to Contents Page Optical Drive: (1 each) Fan Module: (4 each) Display Assembly to Computer Base: (4 each) Modem to System Board: (2 each) Display Bezel: (6 each) Display Panel: (8 each) Top of Palm Rest to Computer Base: (5 each of M2.
Back to Contents Page Flashing the BIOS Dell™Inspiron™1300/B120/B130ServiceManual Flashing the BIOS From a CD Flashing the BIOS From the Hard Drive If a BIOS - update program CD is provided with the new system board , flash the BIOS from the CD.
Back to Contents Page Coin - Cell Battery Dell™Inspiron™1300/B120/B130ServiceManual Removing the Coin - Cell Battery Replacing the Coin - Cell Battery Removing the Coin - Cell Battery 1. Follow the instructions in Before Working Inside Your Computer .
Back to Contents Page .
Back to Contents Page Microprocessor Module Dell™Inspiron™1300/B120/B130ServiceManual Removing the Microprocessor Module Installing the Microprocessor Module Removing the Microprocessor Module 1. Follow the instructions in Before Working Inside Your Computer .
1. Align the pin - 1 corner of the microprocessor module so that it points to the triangle on the system board, and insert the microprocessor module into the ZIF socket. When the microprocessor module is correctly seated, all four corners are aligned at the same height.
Back to Contents Page Display Assembly Dell™Inspiron™1300/B120/B130ServiceManual Removing the Display Assembly Removing the Display Bezel Removing the Display Panel Installing the Display Panel Removing the Display Assembly 1.
12. Lift the display assembly out of the computer base. Removing the Display Bezel 1. Follow the instructions in Before Working Inside Your Computer .
Removing the Display Panel 1. Follow the instructions in " Before Working Inside Your Computer ." 2. Remove the display assembly. See Removing the Display Assembly . 3. Remove the display bezel. See Removing the Display Bezel .
6. Press in both sides of the top flex - cable connector, and pull the top flex - cable connector away from the display connector. 7. Use the pull - tab to disconnect the bottom flex - cable connector from the inverter connector. Installing the Display Panel 1.
.
Back to Contents Page Fan Dell™Inspiron™1300/B120/B130ServiceManual Removing the Cooling Fan Installing the Cooling Fan Removing the Cooling Fan 1. Follow the instructions in Before Working Inside Your Computer .
17. Remove the plate and lift the system board off the fan assembly. Installing the Cooling Fan 1. Position the system board over the fan assembly, aligning the screw holes in the system board with those in the fan assembly. 2. Place the metal plate over the holes in the system board and replace the four M2.
Back to Contents Page Hard Drive Dell™Inspiron™1300/B120/B130ServiceManual Removing the Hard Drive Installing the Hard Drive Removing the Hard Drive To replace the hard drive in the hard drive bay: 1.
Installing the Hard Drive 1. Remove the new drive from its packaging. Save the original packaging for storing or shipping the hard drive. 2. Seat the new hard drive into the bay, and then slide it into the connector by sliding it toward the screw holes until it is fully seated.
Back to Contents Page Hinge Dell™Inspiron™1300/B120/B130ServiceManual Removing the Hinge Cover Replacing the Hinge Cover Removing the Hinge Cover 1. Follow the instructions in Before Working Inside Your Computer .
Back to Contents Page Keyboard Dell™Inspiron™1300/B120/B130ServiceManual Removing the Keyboard Replacing the Keyboard Removing the Keyboard 1. Follow the instructions in Before Working Inside Your Computer .
Back to Contents Page .
Back to Contents Page Modem Dell™Inspiron™1300/B120/B130ServiceManual Removing the Modem Replacing the Modem Removing the Modem 1. Follow the instructions in Before Working Inside Your Computer . 2.
1. Connect the modem cable to the modem. 2. Connect the modem to the system board. Align the connector on the bottom of the modem with the modem connector on the system board, and press down on the right side of the modem. 3. Replace the two M2 x 3 - mm screws.
Back to Contents Page Palm Rest Dell™Inspiron™1300/B120/B130ServiceManual Removing the Palm Rest Removing the Palm Rest 1. Follow the instructions in Before Working Inside Your Computer . 2. Remove the hinge cover.
9. Disconnect the touch pad connector from the system board by pulling the release tabs forward away from the connector and removing the cable. 10.
Back to Contents Page Pinout Assignments for I/O Connectors Dell™Inspiron™1300/B120/B130ServiceManual USB Connector Video Connector USB Connector Video Con.
Back to Contents Page Speakers Dell™Inspiron™1300/B120/B130ServiceManual Removing the Speakers Installing the Speakers Removing the Speakers The speakers are located on the left and right front corners of the base plastics.
2. Route the speaker cables under or between their routing clips. 3. Replace the three M2 x 3 - mm screws. 4. Connect the speaker connector to the system board. Back to Contents Page NOTICE: Ensure that the speaker cables are under or between their routing clips.
Back to Contents Page System Board Dell™Inspiron™1300/B120/B130ServiceManual Removing the System Board Installing the System Board Removing the System Board The system board's BIOS chip contains the Service Tag, which is also visible on a barcode label on the bottom of the computer.
Installing the System Board 1. Insert the video connector on the replacement system board through the side of the base plastics. 2. Replace the five M2.5 x 5 - mm screws that secure the system board to the base plastics. 3. Reconnect the speakers.
Back to Contents Page System Components Dell™Inspiron™1300/B120/B130ServiceManual CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty.
Back to Contents Page 18 antenna cable.
Back to Contents Page Microprocessor Thermal - Cooling Assembly Dell™Inspiron™1300/B120/B130ServiceManual Removing the Microprocessor Thermal - Cooling Assembly Installing the Microprocessor Thermal - Cooling Assembly Removing the Microprocessor Thermal - Cooling Assembly 1.
Installing the Microprocessor Thermal - Cooling Assembly 1. Lower the microprocessor thermal - cooling assembly into place on top of the microprocessor, aligning the numbered screws, labeled &.
Back to Contents Page Dell™Inspiron™1300/B120/B130ServiceManual Information in this document is subject to change without notice. © 2005DellInc.Allrightsreserved. Reproduction in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page Memory, Optical Drive, and Mini PCI Card Dell™Inspiron™1300/B120/B130ServiceManual Memory Optical Drive Mini PCI Card Memory Removing the Memory Module 1. Follow the instructions in Before Working Inside Your Computer .
Replacing the Memory Module 1. Ground yourself and install the new memory module: a. Align the notch in the module edge connector with the tab in the connector slot. b. Slide the module firmly into the slot at a 45 - degree angle, and rotate the module down until it clicks into place.
1. If you want to remove the optical drive while the computer is turned on , double - click the Safely Remove Hardware icon on the taskbar, click the device that you want to eject, and click Stop . Otherwise go to step 2. 2. Close your display and turn the computer upside down.
3. If a Mini PCI card is not already installed, go to step 1 . If you are replacing a Mini PCI card, remove the existing card: a. Disconnect the antenna cable from the Mini PCI card. b. Release the Mini PCI card by spreading the metal securing tabs until the card pops up slightly.
Installing the Mini PCI Card 1. Install the replacement Mini PCI card: a. Align the Mini PCI card with the connector at a 45 - degree angle, and press the Mini PCI card into the connector until it clicks. b. Connect the antenna cable to the Mini PCI card.
デバイスDell 1300の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Dell 1300をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはDell 1300の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Dell 1300の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Dell 1300で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Dell 1300を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はDell 1300の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Dell 1300に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちDell 1300デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。