Airlink101メーカーA3-Port USB Print Server APSUSB2の使用説明書/サービス説明書
ページ先へ移動 of 14
Quick Installation Guide Model # APSUSB2 Ve r. 2 A 3-Port USB Print Server.
Step 1 Connect one end of the Ethernet cable to the RJ-45 port of the Print Server and attach the other end of the cable to a router . S tep 2 Make sure all the printers are powered OFF , then connect one end of the printer cable to the printer port of the Print Server and attach the other end of the cable to the printer port of the printer .
Section 2 Installing PS Utility Step 1 Insert the provided CD and wait for the setup menu to appear . Step 2 Click on PS Utility . Step 3 Click Next . Note: If the setup menu does not appear automatically after you have inserted the CD, go to Start , Run , type D:autorun.
Step 4 Click Next . Step 5 Click Ye s . Step 6 Click Finish ..
Section 3 Configuring Network Setting Before configuring the Print Server ’ s network setting, please take note of your computer’s TCP/IP setting. Step 1 Click on Start , Run , and type command (for Windows 95/98/ME) or cmd (for Windows 2000/ XP) and click OK .
For the Subnet Mask and Default Gateway fields, enter the same number as the TCP/IP setting of your computer . S tep 6 In the IP Address field, enter a valid IP address, subnet mask, and default gateway that matches your local area network. For example : If your computer ’s IP Address is 192.
V erifying Network Connection Section 4 Step 1 Run the PS Utility by going to S tart , (All) Programs , PS Utility , PS Utility v2.00 . Step 2 Make sure the print server is detected under the Device Name . Step 3 Click on Show Web Setup to display the Print Server ’ s Web Configuration Utility .
Step 5 Click on the T ools link and select the port that a printer is connected to and click the T est button. The Print Server will perform a low-level print test, bypassing the operating system layer . Perform the print test for each port that has a printer connected to it.
Section 5 Running PS Wizard W arning: Make sure you have installed the printer driver locally on every computer in your network before running the PS Wizard. Otherwise, the PS Wizard will not run properly . Be sure to run the PS Wizard on all the computers in your network.
Section 4 Step 3 Click Next . Step 4 Select a printer that is connected to the print server and click Next . Note: If you have more than one printer connected to the print server , you’ll need to re-run the PS W izard again to setup the other printers.
Step 5 Double-click on the Print Server Name , select the Printer Port that the printer is connected to, and click Next . Step 6 Click Reboot (for Windows 95/98/ME) or Finish (for Windows 2000/XP). S tep 7 Re-run the PS Wizard and setup any remaining printer(s) that are connected to the print server .
Section 6 Performing Operating System Print T est The final step in setting up the Print Server is to perform an operating system print test. Please note that the instructions below are for Windows XP , but the steps are similar for all the other Windows operating systems.
Section 7 T echnical Support E-mail: support@airlink101.com T oll Free: 1-888-746-3238 Web Site: www .airlink101.com For more information on how to use the Web Configuration Utility or setup for Mac OS, please refer to the User ’ s Manual in the provided CD.
Copyright © 2004 AirLink101. All rights reserved. AirLink101, the stylized AirLink101 logo, specific product designations, and all other words and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and service marks of A irLink101.
デバイスAirlink101 A3-Port USB Print Server APSUSB2の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Airlink101 A3-Port USB Print Server APSUSB2をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAirlink101 A3-Port USB Print Server APSUSB2の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Airlink101 A3-Port USB Print Server APSUSB2の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Airlink101 A3-Port USB Print Server APSUSB2で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Airlink101 A3-Port USB Print Server APSUSB2を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAirlink101 A3-Port USB Print Server APSUSB2の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Airlink101 A3-Port USB Print Server APSUSB2に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAirlink101 A3-Port USB Print Server APSUSB2デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
