Airlink101メーカーAWLL3055の使用説明書/サービス説明書
ページ先へ移動 of 27
802.1 1g USB Adapter with +10dBi Antenna Model # A WLL3055 User ’ s Manual Ve r. 1 A.
2 T able of Contents 1. I NTRO DUCTION ..................... ................... .................. ..................... ................... 4 1.1 Featu res ................... .........................................................................
3 Interference S tatement This equipment has been tested and found to comply with the limits for a Class B digital devi ce, pursuant to Part 15 of FCC Rules. These limit s are designed to provide reasonable protection a g ainst har mful interference in a residential inst allation.
4 1. Introduction The 802.11g USB 2.0 Adapter with +10dBi Patch Antenna (hereafter called USB adapter), compliant with IEEE 802.11b/g, is a hig h-efficiency wireless adapter for wireless networking at home, in office, or in public places.
5 2. Installation Procedures 2.1 Install Utility Software Note: Before instal ling the utility so ftware, DO NOT insert the USB adapter into your computer. If the adapter is ins ert e d already, Windows will detect the adapter and request for a driver.
6 St ep 3 Cli ck Next at the welc ome screen. St ep 4 Cli ck Next t o accept the default destination location for the drive r to be installed in or click Browse to select t he desired locati on.
7 Step 5 For Windows XP, click Continue Anywa y at t h e Windo ws Logo Compatibility screen. For Windows 2000, click Ye s at the Digital Sig nature screen. St ep 6 Remove the Driver & Utility CD from your CD driv e and then rest art your comp uter .
8 2.2 Install Driver Note: In mos t cases, Windows will automatica lly install the driver after the computer is restarted. If the Found New Hardwar e W iza rd appe a rs, follow the instructions b e low. The Found New Hardware Wizard will look d ifferent depending on yo ur operat i ng system.
9 For Windows 2000, click Yes at the Di gital S ig nature scree n. For Windows 98SE or ME, insert the Windows 98SE or ME CD if pro m pted to do so and click OK .
10 Note to Windo w s XP Users: If you encounter the Wireless Zero Configur at io n dial o g box , clic k Yes to enable the Wireless LAN Utility to configure you r USB adapter. Step 1 Sele ct the SSID of your wireless router/acce ss point from the Avai lable Network list and click on the Con nect this site button.
11 Step 2 Verify that the adapter has adequate Signal Strength and Link Quality and then restart the computer. Mode : Select from Sta tio n or Acce ss Point . For more information re gar d ing Access Point, please refer to the next section, 4. Configuring USB Ad apter as an Access Point.
12 Curr ent Netwo r k Infor mation : Displays the network information of the wireless router/access point that the USB adapter is currently connected to. More Setting : Click on this button to access the USB adapter ’ s configuration settings, including WEP and WP A encryption settings.
13 3.1 Conf iguring General Sett ings Click Cha nge to configure the adapter ’s General Connection Setting . Chann el : This setting is for Acc ess Point Mode only . Tx Rate : Select the desired transmission rat e, or leave the default setting of Auto to allow the adap ter t o automatica lly select the optimum rate.
14 3.2 Configu r ing Encry ption Security Click WE P Enc r ypti on Ke y Se tti ng to configure t h e WEP settings. Click Cha nge to configure the WEP Key Se tting and then click Ap ply to save the settings. Note: The W E P Key settin gs m us t be ide nt ica l to the WEP settings of the w ireless router/access point you wish to connect to.
15 Key V alue : Enter the applicab le key values. Up to four key values may be entere d . Note the following rule s when entering Key values: ‧ 64-bit key length requires 10 Hexadecima l char acters (0-9, A-F) or 5 AS CII characters (any number or letter).
16 1. S elect TKIP for Enc r yption , WP A PSK for Au thentication Mode, a n d click Apply . 2. Click on WP A Encry ption Setting and click Change . 3. Enter the appropriate p assphrase in the Passphrase field under the Pre-shared Key section and c lick Apply .
17 3.3 Co nfiguring Pr ofile After you have configured all the settings, you can save your setting s as a profile so you don’t have to re-configure them the next time. T ype in a name for the p rofile in the Profile name field and click Save Curr ent .
18 3.4 Advanced Settings Click on Advanced Setting from th e More Setting window to configure the adapter ’s advanced settin g s. User Inter face : select the language for the adapt e r’s user interface. Power Consumption Setting : • Continuous Access Mode : provides the best signal throughput but least power save.
19 3.5 Informati o n Click on Information from the More Se tting window to view the driver and utility’s information..
20 4. Configuring USB Ad apter as an Access Point 4.1 Configuring Access Point You can configure the USB Adapter as an access point for other wireless client s on your ne twork. Note: You will not be able to access the Internet if you configure the USB ad apter as an access point.
21 Click on Change to configure the settings. Chann el : select the channel you want to use. Basic Ra te : se lect the applic able transfer rate. Tx Rate : select from Auto to 54 M bps. SSID : enter the desired SSID for the access point. Hide SSID (check box) : check to disabl e the broadcast of SSID.
22 4.2 Configu r ing Encry ption Security Select Enable from the WEP drop-down menu and click Setting . Key Length : Select the appropriate encryption key length. Defaul t Key ID : Select which of the f o ur Key V alue you want to use. Key Format : Select ei ther Hexadecima l (0-9, A- F) or ASCII (any number or letter).
23 4.3 Configuring MAC Ad dress Filter Filter Type : Disable : disables MAC address filter. Accept : only accepts connection from the MAC address listed. (Conn ectio n attempts from MAC address not in the list wil l be rejected). Reject : only rejects connection from the MAC address listed.
24 5. Appendix 5.1 Specifi cations 5.2 T roubleshooting A. If the utility cannot be opened or it report s that the ada pter is not fou nd, uni nst all the driver and utility and try installing again. Y ou can also verify if the driver is inst alle d properly in the Device Ma nager .
25 Expand Net w ork ada p ter s an d you shou ld see IEEE 802.1 1g USB Wireless LAN . If there is no yellow questio n ma rk or exclamation mark, the driver is inst alled properly . B . If you do not see your wireless router/access point in the Av ailable Network list, reset your wireless router/access point and click on Refresh .
26 Step 1 Go to Start , Run , typ e cmd and click OK . Step 2 At the command prompt, type ipconfig/release and pres s Enter . St ep 3 After the IP address is released, type ipconfig/re ne w an d pres s Enter . Y ou should get an IP address like 192.168.
27 T echnical Support E-mail: support@airlink1 0 1.com Toll Free: 1-8 88-746-3238 W e b Site: www .airlink101.com *Theoretical maximu m wireless signal rate based on IEEE standard 802.
デバイスAirlink101 AWLL3055の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Airlink101 AWLL3055をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAirlink101 AWLL3055の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Airlink101 AWLL3055の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Airlink101 AWLL3055で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Airlink101 AWLL3055を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAirlink101 AWLL3055の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Airlink101 AWLL3055に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAirlink101 AWLL3055デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。