AirLiveメーカーCoreNVR 9の使用説明書/サービス説明書
ページ先へ移動 of 65
Cor eNVR 9/16 Use r ’ s Manual.
Copyright and Disclaimer i AirLive CoreNVR 9/16 User ’ s Manual Copyright & Disclaimer No part of this publication may be reproduc ed in any form or by any means, whether electronic, mechanical, photocopying, or record ing without the written consent of OvisLink Corp.
Copyright and Disclaimer AirLive SD-2020 User ’s Manual ii FCC Statement Federal Communication Commissi on Interference Statement This equipment has been tested and found to co mply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Ru les.
T able of Contents AirLive CoreNVR 9/16 User’s Manual iii Table of Contents 1. Overview .....................................................................................................1 1.1 Introduction .........................................
T able of Contents AirLive CoreNVR 9/16 User’s Manual iv 4.4 System Setting ..................................................................................20 4.4.1 Device Info.......................................................................
T able of Contents AirLive CoreNVR 9/16 User’s Manual v 8.4 Back up V ideo Files ..........................................................................47 9. Remote Viewing on IE ...................................................................
1. Overview AirLive CoreNVR 9/16 User’s Manual 1 1 1. Overview This user ’s guide explains how to operate Core NVR series system. A user should read this manual completely and carefully before you operate the device.
1. Overview AirLive CoreNVR 9/16 User’s Manual 2 1.2 Key Features H.264 codec for live view and recording over internet Multi-channel scheduled recordin g, playback, motion detection Supports 5 Megapixel resolution HDMI Video Output 2X SATAll HDD up to total 6TB and one external eSATA port.
2. Package Contents and Installation AirLive CoreNVR 9/16 User’s Manual 3 2.1 Package Content 1. CoreNVR 9ch or CoreNVR 16ch X1 2. 12V / 5A adapter X1 3. SA T A data cord X2 4. SA T A power cord X2 5. Hard disk holder X4 pcs 6. Quick install guide X1 7.
2. Package Content s and Inst allation AirLive CoreNVR 9/16 User’s Manual 4 REC: LED on when Record schedule is on. Event: LED on when alarm monitoring is on. 2. Alarm LED: Alarm: LED on when Hard Disk write error . CAM: LED on when system have camera disconnected.
2. Package Contents and Installation AirLive CoreNVR 9/16 User’s Manual 5 6. VGA port: Insert VGA connector here. 7. LAN port: Gigabit LAN port. 8. USB: For connect USB stick or mouse. 9. Audio Out port: Insert speaker connector here. 10. Mic In port: Insert Microphone connector here.
2. Package Content s and Inst allation AirLive CoreNVR 9/16 User’s Manual 6 2.3 St art to use CoreNVR 1. Please refer to the QIG to install the HDD into the CoreNVR system for video storage. 2. T urn On the NVR Power then you will see the AirLive CoreNVR logo as below 3.
3. CoreNVR Main System AirLive CoreNVR 9/16 User’s Manual 7 3.1 Main Console This is the main control pane l of system, to provide live st ream preview, system setup, Two-way audio, playback, volume control, snapshot, start or st op monitor, and PTZ controls.
3. CoreNVR Main System AirLive CoreNVR 9/16 User’s Manual 8 3.3 Screen Division Assign the preview screen to expected layo ut division by clicking these buttons. S w i t c h t o 1 D i v i s i o n . Switch to 4 Division. Switch to 9 Division. Switch to 16 Division.
3. CoreNVR Main System AirLive CoreNVR 9/16 User’s Manual 9 Snapshot: Click to take a snapshot to the HDD; you can management snapshots at system management “snapshot” page.
3. CoreNVR Main System AirLive CoreNVR 9/16 User’s Manual 10 Preset: Select a preset position fr om combo box, camera will move to preset position after click. IRIS: Adjust camera’s IRIS setti ng, or set it to auto. Focus: Adjust camera’s focus setting, or set it to auto.
4. System Setting AirLive CoreNVR 9/16 User’s Manual 11 Click setup button and select “System Setting ” from pop-up menu to approach System setting dialog. 4.1 Camera Setup 4.1.1 Auto Setting Click the “Auto Setting” button for auto add cameras to system, maximum number of cameras are depend on NVR’ s model.
4. System Setting AirLive CoreNVR 9/16 User’s Manual 12 After click the button, system will show the fuzzy search filter dialog, you could input the search filter by model nam e, IP address or MAC address, or you could keep them empty for search all cameras.
4. System Setting AirLive CoreNVR 9/16 User’s Manual 13 Resolution The new camera will try to fit selected resolu tion, if you select “Max”, camera will use maximum resolution, or you could select another resolution, system will choose a near one resolution of camera.
4. System Setting AirLive CoreNVR 9/16 User’s Manual 14 4.1.4 Camera Setup Vendor: You may select camera vendor or use On vif protocol for camera connection. Detect: Check camera available and receive camera model name. Camera Name: Key in camera name at here.
4. System Setting AirLive CoreNVR 9/16 User’s Manual 15 4.1.5 Parameter Setting Profile: Select video codec and resolution for live view and recording. FPS: Select FPS for live view and recording. Protocol: Select protocol HTTP / TCP and UDP. Rate Control: Select EVBR or CBR for better video performance.
4. System Setting AirLive CoreNVR 9/16 User’s Manual 16 Add Camera: 1. Click “Search” button and wait for search job finished. 2. Select a camera on search result list. 3. Preview live streaming video at prev iew window to confirm current camera.
4. System Setting AirLive CoreNVR 9/16 User’s Manual 17 4.2 Schedule Setting Schedule setting allows you to setup different type of recording, you may define multiple recording type for each day or within 24 hours. 1. Select a camera: Select a camera for schedule configuration.
4. System Setting AirLive CoreNVR 9/16 User’s Manual 18 4.3 Network Setting 4.3.1 Network DHCP setting: Checked the “Obtain IP address automatically (DHCP)” to enable auto get IP from DHCP server .
4. System Setting AirLive CoreNVR 9/16 User’s Manual 19 4.3.2 PPPOE Enable / Disable: Select from the radio boxes to enable or disable PPPOE function. Account: Key-in user name to login PPPOE server here. Password: Key-in login PPPOE server password here.
4. System Setting AirLive CoreNVR 9/16 User’s Manual 20 HTTP Port: Set HTTP service port here. Default 80. RTSP Port: Set R TSP service port here. Default 554. RTSP over HTTP: Enable RTSP over HTTP function, the remote live streaming will use HTTP protocol and HTTP port.
4. System Setting AirLive CoreNVR 9/16 User’s Manual 21 Server Date & Time: Display current system date-time. Adjust: Manual: Click setting to approach date-time setting dialog, and select current date and time now, click “OK” to change system time or click “Cancel” button to ab ort configuration.
4. System Setting AirLive CoreNVR 9/16 User’s Manual 22 System Setting: Enable “Auto full screen” to switch to full screen mode when system boot up. Change display language from language combo box. Adjust Auto switch interval seconds. DIPS: Display device DIPS ID.
4. System Setting AirLive CoreNVR 9/16 User’s Manual 23 Description: Describe the user or group. Live View: Define the live view camera access permission for each user . Playback: Define the playback camera access permission for each user . Record: Define user permissi on for recording.
4. System Setting AirLive CoreNVR 9/16 User’s Manual 24 Select a camera: Click on camera list to select a camera to mana gement motion detection setting. Add new motion detection: Click “Add” button to insert new motion window, the new window will inserted at left-up corner.
4. System Setting AirLive CoreNVR 9/16 User’s Manual 25 4.7 Address Book Setting Add E-Mail and other information to address book for send E-Mail alert.
4. System Setting AirLive CoreNVR 9/16 User’s Manual 26 SMTP Config SMTP Server: SMTP sever IP or domain name. SMTP Port: SMTP service port number. User Name: Login SMTP server user ID. Password: Login SMT P server Password. From: E-Mail sender’s name.
4. System Setting AirLive CoreNVR 9/16 User’s Manual 27 FTP Config FTP Server: FTP server IP or domain name. FTP Port: FTP server service port. User Name: Login FTP server account. Password: Login FTP server password. Path: Upload picture or video path.
5. System Management AirLive CoreNVR 9/16 User’s Manual 28 The system management is for you to setup the CoreNV R for video image, return to default, firmware upgrade, event, and storage management. Click setup button and select “System Management” from pop-up menu to approach System setting dialog.
5. System Management AirLive CoreNVR 9/16 User’s Manual 29 Resolution: Change monitor current display resoluti on, please confirm change result , or system will recover old resolution after 15 seconds. Style: You may change the interface to Simple / Normal / Professional / Advance .
5. System Management AirLive CoreNVR 9/16 User’s Manual 30 Device list: Display all devices were detect on NVR, and their information. Partition Button: Select a storage device, and cli ck “Partition” button, system will remove all data and partitions on selected device, and create a new partition.
5. System Management AirLive CoreNVR 9/16 User’s Manual 31 Source Snapshot List: Search snapshot image: 1. select a hard disk path 2. select a time period 3.
5. System Management AirLive CoreNVR 9/16 User’s Manual 32 Event Snapshot: Event Ty pe: Select trigger snapshot event type. Input: Select DI input port number. Time: Select search time period. Search: To search event snapshot based on the condition you set above.
5. System Management AirLive CoreNVR 9/16 User’s Manual 33 5.5 Samba Server Samba Name: Key-in Samba server name for identify server. Samba IP Address: Samba server IP address. Samba Path: Key-in Samba server recording path. User Name: Login Samba server account.
6. Event Setting AirLive CoreNVR 9/16 User’s Manual 34 Y ou may define each event alarm on different day and actions for each camera or CoreNVR system, please refer to the bel ow for the operation instructions. 6.1 Add a New Event 1. Select a camera or local from tree list 2.
6. Event Setting AirLive CoreNVR 9/16 User’s Manual 35 Motion Alarm: Camera’s motion detection. Pleas e set the camera motion first. Disconnect Alarm: Lost camera connection. Digital Input_0 ~ Digital Input_4: Detected input. Schedule Trigger: Trigger by schedule setting.
6. Event Setting AirLive CoreNVR 9/16 User’s Manual 36 Alarm seconds: Define the alarm time period when the event is triggered. Merge seconds: is set for merge two same alarms between setting seconds. 7. Click “Add” button below Action list table.
6. Event Setting AirLive CoreNVR 9/16 User’s Manual 37 6.3 Delete exist Event schedule or Output Action Delete Event: 1. Select an Event from “Event List”. 2. Click “Delete” button below the “Event List” Delete Event Schedule: 1. Select an event from “Event List” 2.
6. Event Setting AirLive CoreNVR 9/16 User’s Manual 38 Display on Channel: When event was triggered, system will display OSD stri ng on selected channels. Record: When event was triggered, system will force selected channels record. ※ Note : 1. System must switch “Schedul e Monitor” On event was triggered.
6. Event Setting AirLive CoreNVR 9/16 User’s Manual 39 TCP: Send notification TCP sockets to TCP server when event is triggered. HTTP: Send notification to HTTP se rver when event is triggered. FTP: 1. Select channels for snapshot or record a file when event is triggered.
7. Log Viewer AirLive CoreNVR 9/16 User’s Manual 40 7 7. Log V iewer 7.1 System Log Log Type: Select a log type to filter data. Time: Setup search logs in time period. Limit Record: Setup maximum number records of search result. Search: Click “Search” button to start search, the sear ch result will display in the table of below .
7. Log Viewer AirLive CoreNVR 9/16 User’s Manual 41 7.2 Event Log Device: Select a Device for search filter. Log Type: Select a log type to filter data. Input: Setup DI input port search filter , only worked on search DI event. Time: Setup search logs in time periods.
7. Log Viewer AirLive CoreNVR 9/16 User’s Manual 42 7.3 Bitrate Log Y ou may search bitrate for selected time period; it will show different co lor of bitrate data as below . Select a date: Click on the calendar with blue background days. Bit-rate table: System will display the bit-rate log in the table.
8. Playback AirLive CoreNVR 9/16 User’s Manual 43 8 8. Playback You may search and playback the recorded video files with selectable time period, also able to convert the video to avi or backup the video files. 8.1 Search Recorded Video Files Click to approach search dialog.
8. Playback AirLive CoreNVR 9/16 User’s Manual 44 1. Select playback date: If there is record history data, System will set calendar ’s day to blue to identify which days has record files. 2. Begin search: Click “Search” button to start search record file in selected date, and system will draw search result in the grid.
8. Playback AirLive CoreNVR 9/16 User’s Manual 45 Simple Search: Select playback period from date controls directly, and select which cameras will be playback. Click the “OK” button when you finished the search. 8.2 Playback Control Buttons Play video forward.
8. Playback AirLive CoreNVR 9/16 User’s Manual 46 Seek to previous frame when on pause mode. Seek to next frame when on pause mode. Close playback and return to live view . Change of playback speed. Adjust playback audio volume. The IP Camera supports up to eight Cruise Paths.
8. Playback AirLive CoreNVR 9/16 User’s Manual 47 8.3 Convert to A vi file 1. Click to open search dialog. 2. Select convert camera(s) and time period for converting 3. Select converted files desti nation folder then click “OK”. 8.4 Back up Video Files 1.
9. Remote V iewing on IE AirLive CoreNVR 9/16 User’s Manual 48 9 9. Remote V iewing on IE The CoreNVR is able to be viewed from Internet Explorer when the ne twork is available, you can have live view , playback and most of all functions are as same as the CoreNVR system.
9. Remote V iewing on IE AirLive CoreNVR 9/16 User’s Manual 49 Please login your username and password, and then you will see the “Select V iew Channel” window as below . Y ou may select channel(s) you would like to view on your computer . Please also check the “Low Bitrate” to reduce the bandwidth consumption on IE.
9. Remote V iewing on IE AirLive CoreNVR 9/16 User’s Manual 50 9.2 Live View on IE The picture below is the live view on IE, which exactly the same as CoreNVR system.
9. Remote V iewing on IE AirLive CoreNVR 9/16 User’s Manual 51 9.4 Screen Division Assign the preview screen to expected layo ut division by clicking these buttons. Switch to 1 Division. Switch to 4 Division. Switch to 9 Division. Switch to 16 Division.
9. Remote V iewing on IE AirLive CoreNVR 9/16 User’s Manual 52 Restore Division Default: Restore to default division w hen you finished full screen view . Snapshot: Click to take a snapshot to the HDD; you can management snapshots at system management “snapshot” page.
9. Remote V iewing on IE AirLive CoreNVR 9/16 User’s Manual 53 Move PTZ camera direction by click direction buttons. Click to make camera return home position.
9. Remote V iewing on IE AirLive CoreNVR 9/16 User’s Manual 54 9.6 Playback on IE Click to see Playback page on IE. Play video forward. Pause playing video.
9. Remote V iewing on IE AirLive CoreNVR 9/16 User’s Manual 55 Seek to next frame when on pause mode. Close playback and return to live view . Change of playback speed. Adjust playback audio volume. The IP Camera supports up to eight Cruise Paths. Please follow the instructions below for Cruise Path setup.
9. Remote V iewing on IE AirLive CoreNVR 9/16 User’s Manual 56 Search recorded video files, plea se see chapter 8.1 for information. Take a snapshot to hard disk.
10. Appendix AirLive CoreNVR 9/16 User’s Manual 57 10 10. Appendix A.Product S pecification Hardware Chipset ARM Cortex A9 LAN Port Giga RJ-45 Ethernet Port x 1 Video Output VGA x 1 + HDMI x 1 Audio Input MIC x 1 (phone jack 3.5mm) Audio Output Phone Jack 3.
10. Appendix AirLive CoreNVR 9/16 User’s Manual 58 PTZ z Support PTZ cameras z Preset / Tour / Auto pan / Iris / Focus / Speed Record z Schedule / RTC / Motion Detection / DI Detection / Event Trigg.
10. Appendix AirLive CoreNVR 9/16 User’s Manual 59 General Power AC100-240V/in, DC12V(4A) T emperature Operating: 0°C ~ 40°C Humidity Operating: 10%~80% Dimension 33.
デバイスAirLive CoreNVR 9の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
AirLive CoreNVR 9をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAirLive CoreNVR 9の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。AirLive CoreNVR 9の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。AirLive CoreNVR 9で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
AirLive CoreNVR 9を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAirLive CoreNVR 9の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、AirLive CoreNVR 9に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAirLive CoreNVR 9デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。