AirLiveメーカーVS-100の使用説明書/サービス説明書
ページ先へ移動 of 88
VS-100 H.264 PoE Video Server Use r ’ s Manual.
Copyright and Disclaimer Copyright & Disclaimer No part of this publication may be reproduc ed in any form or by any means, whether electronic, mechanical, photocopying, or record ing without the written consent of OvisLink Corp. OvisLink Corp. has made the best effort to ens ure the accuracy of the information in this user ’ s guide.
T able of Contents i AirLi ve VS-100 User ’ s Manual Table of Contents 1. Overview ...................................................................................................1 1.1 Introduction ............................................
1. Overview 1 AirLi ve VS-100 User ’ s Manual 1 1. Overview 1.1 Introduction The VS-100 is an inexpensive fully scalable surveillance technology . Because the V ideo Servers can be plugged into your existing local area network infrastructure, you will potentially save thousands of dollars on unnecessary cabling.
1. Overview AirLive VS-100 User ’ s Manual 2 1.2 Product Features and Specification Feature Summery z Upgrade your CCTV camera to network-enabled camera z Support up to D1 resolution z Multiple H.264, Motion J PEG and MPEG-4 video streams z Support 802.
1. Overview 3 AirLi ve VS-100 User ’ s Manual Audio Audio Encoder RTSP: G.711 64kbps, G.726 32kbps 3GPP: AMR Audio Streaming One-way or two-way Audio Input Built-in or external microphone Audio Outp.
1. Overview AirLive VS-100 User ’ s Manual 4 V iewing System OS Windows® XP, Vista Browser IE 6.0 or latter, Firefo x 2.0 or later, Safari Cell Phone With 3GPP player Video Player VLC, Quick Time, Real Player, Core Player Sof tware Bundled NVR Program CamPro Express 64, CamPro HD 1.
2. Package Content s and Inst allation 5 AirLi ve VS-100 User ’ s Manual 2.1 Package Contents User can find the following items in the package as below: z VS-100 is the main element of the product. z Power Adapter dedicates 12V DC electric power output to Video Server .
2. Package Content s and Inst allation AirLive VS-100 User ’ s Manual 6 2.2 Hardware Overview Front Side LAN Socket The LAN socket is a RJ-45 connector for connec tions to 10Base-T Ethernet or 100Base-TX Fast Ethernet cabling.
2. Package Content s and Inst allation 7 AirLi ve VS-100 User ’ s Manual DI/DO/RS485 and DI/DO Connector The V ideo Server provides a terminal block wit h 6 pins of connectors for DIDO and RS485. Please refer to the Appendix B in th is manual for more information.
2. Package Content s and Inst allation AirLive VS-100 User ’ s Manual 8 12VDC-in Jack The input power is 12VDC. Note that supply the power to the V ideo Server with standard power adapter included in pa ckage. Otherwise, the improper power adapter may damage the unit and result in danger .
2. Package Content s and Inst allation 9 AirLi ve VS-100 User ’ s Manual 2. Attach ex ternal microphone to V ideo Server (option) If user needs not only video stream but also audio stream, then an external microphone should be attached to V ideo Server .
2. Package Content s and Inst allation AirLive VS-100 User ’ s Manual 10 3. Plug an Ethernet cable into V ideo Server Connect an Ethernet cable to the LAN socket loca ted on the device’s p anel and att ach it to the network.
2. Package Content s and Inst allation 1 1 AirLive VS-100 User ’ s Manual Connect an external power supply to the 12V DC power in connector of the Video Server . Note: Use the power adapter , 12VDC, included in the p ackage and connect the other end to wall outlet for AC power .
2. Package Content s and Inst allation AirLive VS-100 User ’ s Manual 12 Search When launch the IPWizard II, a searching wi ndow will pop up. IPWizard II is starting to search Network Cameras on the LAN. The existed devices will be listed as below .
2. Package Content s and Inst allation 1 3 AirLive VS-100 Use r ’ s Manual Vi ew If IPWizard II finds network dev ices, V iew button will be available. Please select the device you want to view and click the V iew button. Then you could see the video from camera directly .
2. Package Content s and Inst allation AirLive VS-100 User ’ s Manual 14 LAN In case you want to change the IP related para meters of wired interface, please select the device you want to configure and click the LA N button. Relative settings will be carried out as below .
2. Package Content s and Inst allation 1 5 AirLive VS-100 Use r ’ s Manual In case, you do not want to change username and/or p assword, then just click “Submit” button to perform your setting accordingly . Cl ick “<<” button will go back to previous page.
2. Package Content s and Inst allation AirLive VS-100 User ’ s Manual 16 After keying in new username and p assword, c lick “Submit” button to perform your setting accordingly . Click “<<” button will go back to previous page. Wireless VS-100 does not support wireless function.
3. Remote Access to VS-100 1 7 AirLive VS-100 Use r ’ s Manual 3.1 Router Once installed, the device is accessible on your LAN. T o access the device from the Internet you must configure your broadband router to allow in coming data traf fic to the device.
3. Remote Access to VS-100 AirLive VS-100 User ’ s Manual 18 3.2 Access the VS-100 via Internet Explorer 1. Start the web browser on the computer and type the IP address of the Network Camera you want to monitor as below: The Login Window of the Camera is prompted: 2.
3. Remote Access to VS-100 1 9 AirLive VS-100 Use r ’ s Manual 3.3 Logging in as an User If you log in the Camera as an ordinary User , “Setting” function wi ll be not accessible. 3.4 Logging in as an Administrator If you log in the Network Camera as the Ad ministrator, you can perform all the settings provided within the device.
4. Operating the V ideo Server AirLive VS-100 User ’ s Manual 20 4.1 Live View Start-up screen will be as follow no matter an ordinary users or an administrator. 4.1.1 Monitor Image Section The image shot by the Network Camera is s hown here. The date and time are displayed at the top of the window.
4. Operating the V ideo Server 2 1 AirLive VS-100 Use r ’ s Manual 4.1.3 Streaming Protocol User can select proper streaming protocol according to networking environment. 4.1.4 Language The device could provide multiple langu ages to meet custom er’s requirement.
4. Operating the V ideo Server AirLive VS-100 User ’ s Manual 22 Camera direction Hide PTZ contro l Hide PTZ control: Click the icon will hide the PTZ control function. Camera direction: Control camera up/down/left/right and home position. Zoom control: Press WIDE to zoom out, and press TELE to zoom in.
4. Operating the V ideo Server 2 3 AirLive VS-100 Use r ’ s Manual Preset: Add/Update the preset positions or go to one of these positions. Tour: Select one of the camera tours. Camera tour is comprised by series of preset locations. Go tour: Execute the selected camera tour.
4. Operating the V ideo Server AirLive VS-100 User ’ s Manual 24 Close: Close OSD function. Select: Select/change the option in the OSD menu. Back: Back to upper level in the OSD menu. Exit: Exit this OSD page and return to home page.
4. Operating the V ideo Server 2 5 AirLive VS-100 Use r ’ s Manual Digital Zoom Click Digit al Zoom to active this function as above. Us er can drag or scale the box over the video to adjust zoom ratio and position. Record Click Record to activa te this function.
4. Operating the V ideo Server AirLive VS-100 User ’ s Manual 26 After stop recording, list the files, this file is named as V ideo_yyyymmddhhmmss.avi The ASF files can be display by the standar d Windows Media Player , but it needs the DirectX 9.0 or later version to be installed.
4. Operating the V ideo Server 2 7 AirLive VS-100 Use r ’ s Manual Statistics Click St atistics to activate this function. A window will be popup to show the statistics information of the streaming status. Note that this information is the st atistics between the device and your local PC.
4. Operating the V ideo Server AirLive VS-100 User ’ s Manual 28 About Click About to show this ActiveX information. 4.2 Administrating the Video Server 4.2.1 System Setting This function is only available for user logged into Network Camera as administrator.
4. Operating the V ideo Server 2 9 AirLive VS-100 Use r ’ s Manual 4.2.1.1 Network: Configure Network settings Use this menu to configure the network to connect the device and the clients. Network This section provides the menu for connecting the device through Ethernet cable.
4. Operating the V ideo Server AirLive VS-100 User ’ s Manual 30 IP address, Subnet mask, and Gateway: If you do not select Obtain an IP address automatically , then you need to enter these network parameters manually. Obtain DNS from DHCP: DNS: Stands for Domain Name System.
4. Operating the V ideo Server 3 1 AirLive VS-100 Use r ’ s Manual your ISP. A dynamic IP addre ss complicates remote access si nce you may not know what your current WAN IP address is when you want to access your device over the Internet. One of the possible solutions to the dynamic IP address problem come s in the form of a dynamic DNS service.
4. Operating the V ideo Server AirLive VS-100 User ’ s Manual 32 DDNS: To enable or disable the DDNS service here. Server name: Choose the built-in DDNS server. DDNSHost: The domain name is applied of this device. User name: The user name is used to log into DDNS.
4. Operating the V ideo Server 3 3 AirLive VS-100 Use r ’ s Manual PPPoE: To enable or disable the PPPoE service here. User name: Type the user name for the PPPoE servic e which is provided by the ISP. Password: Type the password for the PPPoE service which is provided by the ISP.
4. Operating the V ideo Server AirLive VS-100 User ’ s Manual 34 4.2.1.4 Streaming RTSP is a streaming control pr otocol, and a starting point for negotiating transports such as RTP, multicast and Unicast, and for negotiati ng codecs.
4. Operating the V ideo Server 3 5 AirLive VS-100 Use r ’ s Manual 4.2.1.5 UPnP UPnP is short for Universal Pl ug and Play, which is a networking architecture that provides compatibility among networking equipment, software, and periphera ls. This device is an UPnP enabled Video Server.
4. Operating the V ideo Server AirLive VS-100 User ’ s Manual 36 4.2.1.6 IP Filter You can enter different user’s IP address whic h are allowing enter or denying by the device. IP Filter: To enable or disable the IP filter function here. IP Filter Policy : Choose the filter policy wher e is denying or allowing.
4. Operating the V ideo Server 3 7 AirLive VS-100 Use r ’ s Manual 4.2.1.7 IP Notification In case the IP address is changed, system is able to send out an email to alert so meone if the function is enabled. SMTP Notification (e-mail): If enable this function, then the “ Send to “ and “ Subject ” fields need to be filled.
4. Operating the V ideo Server AirLive VS-100 User ’ s Manual 38 TCP Notification: If enable this function, then the “ TCP Server “, “ TCP Port ”, and “ Message ” fields need to be filled. TCP Server: Type the server name or the IP address of the TCP server.
4. Operating the V ideo Server 3 9 AirLive VS-100 Use r ’ s Manual URL: Type the server name or the IP address of the HTTP server. HTTP Login name: Type the user name for the HTTP server. HTTP Login Password: Type the password for the HTTP server.
4. Operating the V ideo Server AirLive VS-100 User ’ s Manual 40 4.2.2.1 Picture Color Level: Large value will be colorful. Brightness: Large value will brighten camera. Sharpness: Large value will sharpen camera. Contrast: Large value will contrast camera heavily.
4. Operating the V ideo Server 4 1 AirLive VS-100 Use r ’ s Manual Default Settings: Restore to factory image settings. 4.2.2.2 PTZ Setting Camera Protocol: This device can connect to a PTZ camera or speed dome camera and controls them thru RS485 interface.
4. Operating the V ideo Server AirLive VS-100 User ’ s Manual 42 OSD Control: Choose the corresponding model for OSD control OSD Open: Control commands for Open function. OSD Close: Control commands for Close function. OSD Select: Control commands for Select function.
4. Operating the V ideo Server 4 3 AirLive VS-100 Use r ’ s Manual OSD Up: Control commands for Up function. OSD Down: Control commands for Down function. OSD Left: Control commands for Left function. OSD Right: Control commands for Right function.
4. Operating the V ideo Server AirLive VS-100 User ’ s Manual 44 4.2.2.4 Tour Setting Up to 128 positions can be preset, and the ca mera can be programming to move to the preset position sequentially. Tour Name: The group name of the sequence of camera tour .
4. Operating the V ideo Server 4 5 AirLive VS-100 Use r ’ s Manual Wait Time: Type a period of time during which the camera is to stay at each preset point, between 0 to 36000 seconds. To use the camera tour function, user mu st preset some camera positions first.
4. Operating the V ideo Server AirLive VS-100 User ’ s Manual 46 Software Version: This information shows the softwa re version of the device. Network LED: To turn on or off Network LED. Power LED (Wireless LED): To turn on or off Power LED ( wireless LED if WLAN model).
4. Operating the V ideo Server 4 7 AirLive VS-100 Use r ’ s Manual Server Date & Time: Displays the date and time of the device. PC Time: Displays the date and time of the connected PC. Adjust: - Synchronize with PC: Click this option to enable time synchronization with PC time.
4. Operating the V ideo Server AirLive VS-100 User ’ s Manual 48 NTP Server: Type the host name or IP address or domain name of the NTP server. NTP sync.
4. Operating the V ideo Server 4 9 AirLive VS-100 Use r ’ s Manual Backup Setting: To take a backup of all of the parameters, c lick this button. If necessary, it will then be possible to return to the pr evious settings, if settings ar e changed and there is unexpected behavior.
4. Operating the V ideo Server AirLive VS-100 User ’ s Manual 50 Firmware Upgrade: The device supports new firmware upgrade (the softwa re that controls the operation in the device). Please contact your dealer fo r the latest version if necessary.
4. Operating the V ideo Server 5 1 AirLive VS-100 Use r ’ s Manual 6. The upgrade progress inform ation will be displayed. Once the uploading process completed, the device will reboot the system automatically . 7. Please wait for timer countdown, and then y ou can use IPWizard to search the device again.
4. Operating the V ideo Server AirLive VS-100 User ’ s Manual 52 4.2.4.1 Common Text Overlay Setting: There are some important information can be embedded into image, including date, time, and/or text.
4. Operating the V ideo Server 5 3 AirLive VS-100 Use r ’ s Manual 4.2.4.2 Video Profile Video Type: V ideo codec of the se lected video profile. Resolution: Resolution of the selected video profile. Rate Control: Defines the rate control method of this prof ile.
4. Operating the V ideo Server AirLive VS-100 User ’ s Manual 54 Max Frame Rate: Defines the targeted frame rate of this profile. For example, set the frame rate to 15 fps, then the image will be updated fo r 15 frames per second as possible. User need to set reasonable max frame rate versus video quality under the limited bandwidth.
4. Operating the V ideo Server 5 5 AirLive VS-100 Use r ’ s Manual 4.2.4.3 ROI ROI stands for Region of Interest. It can help us er to save the valuabl e bandwid th in some application. For example, user can record th e SXGA video stream from the LAN and access the ROI video stream from the W AN for some critical area.
4. Operating the V ideo Server AirLive VS-100 User ’ s Manual 56 4.2.5 Audio: Audio p arameters Audio: To enable or disable audio function Mute While PT: Mute the audio while pan and/or tilt.
4. Operating the V ideo Server 5 7 AirLive VS-100 Use r ’ s Manual 4.2.6 User: Manage user name , p assw ord and login privilege Use this menu to add, update, or remove the usernames and passwords of the Administrator and viewer. Viewer login: Select “Anonymous” to allow any one view ing the video once connec ted.
4. Operating the V ideo Server AirLive VS-100 User ’ s Manual 58 4.2.7 E-Mail: Setup E-Mail configuration You may setup SMTP mail param eters for further operation of Event Schedule.
4. Operating the V ideo Server 5 9 AirLive VS-100 Use r ’ s Manual SMTP Authentication: Select the authentication requi red when you send an e-mail. Disable: if no authentication is required when an e-mail is sent. Enable: if authentic ation is required when an e-mail is sent.
4. Operating the V ideo Server AirLive VS-100 User ’ s Manual 60 4.2.8 Object detection: Setup Object detection Use this menu to specify motion detection windo w 1 to window 10 and se t the conditions for detection while observing a captured image. Add and Del: To add or delete the motion windows.
4. Operating the V ideo Server 6 1 AirLive VS-100 Use r ’ s Manual Name: Name of the specified motion window. Object Size: Define the object size of motion detection. The higher object size will only larger objects trigger motion detection. The lower object size will even small objects trigger motion detection too.
4. Operating the V ideo Server AirLive VS-100 User ’ s Manual 62 Enable automatic disk cleanup: Delete old recorded files while the conditions are reached as below. Remove recordings order than: Delete old files by days. Remove oldest recordings when disk is: Delete old files by left capacity.
4. Operating the V ideo Server 6 3 AirLive VS-100 Use r ’ s Manual 4.2.1 1 Event Server: Setup FTP/TCP /HTTP/SAMBA server configuration 4.2.1 1.1 FTP Server You may setup FTP parameters fo r further operation of Event Schedule.
4. Operating the V ideo Server AirLive VS-100 User ’ s Manual 64 FTP Login name: Type the user name for the FTP server. FTP Login Password: Type the password for the FTP server. FTP Port: Set port number of FTP service. FTP Path: Set working directory path of FTP server.
4. Operating the V ideo Server 6 5 AirLive VS-100 Use r ’ s Manual Name: User can specify multiple TCP servers as wish. Therefore, user needs to specify a name for each TCP server setting. TCP Server: Type the server name or the IP address of the TCP server.
4. Operating the V ideo Server AirLive VS-100 User ’ s Manual 66 URL: Type the server name or the IP address of the HTTP server. Test: Check the HTTP server whether it is available or not. HTTP Login name: Type the user name for the HTTP server.
4. Operating the V ideo Server 6 7 AirLive VS-100 Use r ’ s Manual 4.2.11.4 Samba Server The device also can send video str eam to specified SAMBA server. Name: User can specify multiple HTTP servers as wi sh. Therefore, user needs to specify a name for each HTTP server setting.
4. Operating the V ideo Server AirLive VS-100 User ’ s Manual 68 SAMBA Path: Set working directory path of SAMBA server. 4.2.12 Event Schedule: Configure the event schedule 4.2.12.1 Setting This menu is used to specify the schedule of Event or Schedule Trigger and activate the some actions provided by this device.
4. Operating the V ideo Server 6 9 AirLive VS-100 Use r ’ s Manual Enable Time: Define the feasible time slot. Trigger by: Select the triggered sources. Action: Define the actions once event triggered. Example 1: Send file to FTP server by motion triggered always: a.
4. Operating the V ideo Server AirLive VS-100 User ’ s Manual 70 Example 2: Send file to E-Mail server by motion tri ggered from Friday 18:00 to Saturday 06:00 a. Select event trigger. b. Enable time: start from Friday 18:00 and keep work in 12 hours, so it will stop on Saturday 06:00.
4. Operating the V ideo Server 7 1 AirLive VS-100 Use r ’ s Manual Example 3: Enable Voice Alert every 10-minute during 18:00 to 24:00 from Monday to Friday. a. Type: Select schedule trigger and interval is 10-minute. b. Enable time: Select Monday to Friday, and set start time from 18:00 and keep work in 6 hours.
4. Operating the V ideo Server AirLive VS-100 User ’ s Manual 72 4.2.12.2 Record User can choose the type of record f ile for event or schedule application. Record File Type: Choose AVI or JPEG file format. Record File Prefix: Define the prefix of recorded filename.
Appendix A. Alarm I/O Connector 7 3 AirLive VS-100 Use r ’ s Manual A.1 Interfacing to the External I/O Some features of the Video Server can be acti vated by an external sensor that senses physical changes in the area device is monitoring. These changes can include intrusion detection or certain physical change in the m onitored area.
Appendix A. Alarm I/O Connector AirLive VS-100 User ’ s Manual 74 5 D+ terminal of RS485 6 D- terminal of RS485 User can refer to the schematic below to make a proper connection between I/O connector and external sensor and output device.
Appendix B. F AQ 7 5 AirLive VS-100 Use r ’ s Manual Question Answer or Resolution Features The video and audio codec is adopted in the device. The device utilizes H.264, MPEG4 and JPEG triple compression to providing high quality images. Where H.264 and MPEG4 are standards for video compression and JPEG is a standard for image compression.
Appendix B. F AQ AirLive VS-100 User ’ s Manual 76 firewall exists on the network. port need to be opened on the fi rewall or NAT router. The username and password for the first time or after factory default reset Username = admin and password = airlive .
Appendix B. F AQ 7 7 AirLive VS-100 Use r ’ s Manual Some IP cameras are working but others are failed • Maybe too many IP camera s have been installed on the LAN, and then NAT router is out of resource to support more cameras. You could tu rn off and on NAT router to clear out of date information inside router.
Appendix B. F AQ AirLive VS-100 User ’ s Manual 78 • Access the Network Camera from the Internet with the global IP address of the r outer and port number of Network Camera. • Some routers reject the gl obal IP address to access the Network Camera on the same LAN.
Appendix B. F AQ 7 9 AirLive VS-100 Use r ’ s Manual The device work locally but not externally. • Might be caused from the fi rewall protection. Check the Internet firewall with your system or network administrator. The firewall may need to have some settings changed in order for the device to be accessible outside your LAN.
Appendix B. F AQ AirLive VS-100 User ’ s Manual 80 Pan/Tilt does not work smoothly. There may be a slight delay when you are using the Pan/Tilt feature in conjunc tion with streaming audio and video.
Appendix C. PING IP Address 8 1 AirLive VS-100 Use r ’ s Manual The PING (stands for Packet Internet Gr oper) command is used to detect whether a specific IP address is accessible by sending a packet to the specific address and waiting for a reply.
Appendix D. Bandwid th Estimation AirLive VS-100 User ’ s Manual 82 The frame rate of video transmitted from the device depends on connection bandwidth between client and server, video resolution, c odec type, and quality setting of server. Here is a guideline to help you roughly estimate the bandwidth requirements form your device.
Appendix E. Power Line Frequen cy 8 3 AirLive VS-100 Use r ’ s Manual COUNTR Y V O LTA G E FREQUENCY COMMENTS Argentina 220V 50 Hz *Neutral and line wires are reversed from that used in Australia and elsewhere. Australia 230V* 50 Hz *Outlets typically controlled by adjacent switch.
Appendix E. Power Line Frequen cy AirLive VS-100 User ’ s Manual 84 Kawasaki, Sapporo, Y okohoma, and Sendai); Western Jap an 60 Hz (Osaka, Kyoto, Nagoya, Hiroshima) Malaysia 240V 50 Hz Netherlands .
Appendix F . 3GPP 8 5 AirLive VS-100 Use r ’ s Manual To use the 3GPP function, in add ition to previous section, you might need more information or configuration to make this function work.
デバイスAirLive VS-100の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
AirLive VS-100をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAirLive VS-100の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。AirLive VS-100の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。AirLive VS-100で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
AirLive VS-100を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAirLive VS-100の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、AirLive VS-100に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAirLive VS-100デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
