Diamondbackメーカー700の使用説明書/サービス説明書
ページ先へ移動 of 56
700 T m Owner’s Manual 700tmOM 8/24/06 11:15 AM Page 3.
2 700 T m Owner’s Manual Purc haser’s Reference Information IT IS IMPERA TIVE THA T YOU FILL IN THE FOLLOWING INFORMA TION AND REFER TO IT SHOULD THE NEED FOR SERVICE ARISE. Product Name: Diamondback 700Tm T readmill Serial Number: R _ _ _ _ _ _ _ _ _ _ T o Activate W arranty: REGISTER YOUR W ARRANTY A T www .
700 T m Owner’s Manual 3 T able of Contents Purchaser ’ s reference information 2 Introduction 4 Safety Instructions and W arnings 5 Assembly Instructions 7 W orkout Guidelines 10 Maximum Heart Ra.
4 700 T m Owner’s Manual Introduction Congratulations on the purchase of your new 700Tm treadmill. Y ou are about to experience one of the most effective and technically advanced methods of low impact, cardiovascular exercise available today .
700 T m Owner’s Manual 5 Safety Instructions and W arnings This treadmill is built for optimum safety and is designed to meet or exceed all domestic and inter- national standards. However , basic precautions need to be followed when operating any exer- cise equipment.
6 700 T m Owner’s Manual Safety Instructions & W arnings (continued) used in the area. 1 4 . Keep the treadmill away from walls to allow proper ventilation. Air should be able to circulate freely around the unit. Keep all air openings free of dirt and dust.
700 T m Owner’s Manual 7 Assembl y Ins tructions Step 1: Upright Posts Assembly 1. Straight out the main wire harness and insert it though the top of left upright post. 2. Slide the upright post onto its receptor and insert three M8 x55mm screws and washers on the side and two M8 x 15mm screws abd washers on the front.
8 700 T m Owner’s Manual Assembl y Ins tructions Step 3: Handrail Assembly 1. Insert Left handrail into Left handrail receptor . 2. Insert two M6 x12mm screws and tighten them with Allen wrench. 3. Repeat the procedure 1 & 2 for the Right handrail.
700 T m Owner’s Manual 9 Assembl y Ins tructions Step 5: Motor Cover Assembly 1. Place the Left motor cover onto the left side of frame. 2. Insert and tighten the self-tap M5 x 10mm screw into the center and top mounting hole using Phillips screwdriver .
10 700 T m Owner’s Manual W ork out guidelines G ood health is an exercise in common sense. The Surgeon General released a new study in 2001, The Surgeon General’ s Call T o Action T o Prevent and Decrease Overweight and Obesity . It indicates that 61% of American adults are either over weight or obese.
700 T m Owner’s Manual 11 W ork out guidelines (continued) stress placed on the cardiovascular system. T aking full advantage of this information, this treadmill is designed to include heart rate monitoring features. If exercise intensity is too low or too high, no gains will be made in fitness.
G et a smart star t on exercising. Anyone over the age of 35, as well as younger persons whom are over weight, should check with his/her physician before beginning any type of exercise program.
700 T m Owner’s Manual 13 Heart R ate Monitoring Devices Pulse Hand Grips (Standard) The 700Tm is heart rate controlled and comes standard with stainless steel pulse handgrips. T o activate, gently grasp both handgrips to obtain a heart rate reading.
14 700 T m Owner’s Manual Console Glossar y of T erms • Idle mode = Console is reset and waiting for an entr y . The dot matrix display window will show “DB” and message display will scroll following a message of ”SELECT A PROGRAM OR PRESS ST ART”.
700 T m Owner’s Manual 15 Console (continued) returns to idle mode. • Pause a program: Y ou may interrupt or pause a program for up to 30 minutes during a workout before the console resets.
16 700 T m Owner’s Manual Console (continued) UP/DOWN key or numeric quick keys to adjust the HR setting during program set up mode. Numeric quick keys can not be accessed to adjust HR setting during program run mode. • % MAX HR = Pulse / (220 minus age) * 100%.
700 T m Owner’s Manual 17 Console La y out Data display window Dot matrix window Profile display select key % max Heart Rate display Program Select keys W orkout programs Message window & Select.
18 700 T m Owner’s Manual Console La y out (continued) Displays: 1. Dot Matrix /Pr ofile display: It displays the program profile during the program run mode. • For Classic programs, there are three profiles you can select: Speed pro file, Incline profile & T rack profile.
700 T m Owner’s Manual 19 Console La y out (continued) 2. W orkout data display: a. Speed and Incline display • Speed (mph) – Current speed. • Incline (%) – current incline % b.
20 700 T m Owner’s Manual Console La y out (continued) c. Enter key: o After program selecting, press “ENTER” to accept the program and enter its setup mode. o After age, weight, time….. adjustment, press “ENTER” key to accept your entr y .
700 T m Owner’s Manual 21 W ork out Prog r ams BEL T ST ART SEQUENCE Belt start sequence is designed with your safety in mind. It is an indication to let you know that the treadmill motor is about to start.
22 700 T m Owner’s Manual W ork out Prog r ams (continued) Pause, Reset, Restart, or Switch the program See Console section for details. COOL DOWN G etting Started This treadmill is equipped with a 3-minute Cool Down at the end of each program. It a ppears as soon as a program ends.
700 T m Owner’s Manual 23 W ork out Prog r ams (continued) Beginning the Program W orkout Summary appears as soon as the Cool Down mode ends or a “STOP” key is pressed during Cool Down mode. The dot matrix will display the final program profile.
24 700 T m Owner’s Manual W ork out Prog r ams (continued) P rogram Default V alues • Max program time = 4 hours • Default Speed = 0.5mph • Default Incline = 0% • Default profile = speed profile; each segment time = 1 minute.
700 T m Owner’s Manual 25 W ork out Prog r ams (continued) CLASSIC PROGRAMS MANUAL PROGRAM Getting Started Y ou could build your own profile with Manual program. Be sure to include a W arm Up period during your workout since the W arm Up mode is skipped in the Manual pro- gram.
26 700 T m Owner’s Manual W ork out Prog r ams (continued) E nter T i me 1. If Enter key is pressed, the message window will flash a message of “ENTER TIME”, then “TIME = XX MIN” will be blinking. 2. Y ou may press “UP/DOWN” or numeric quick key to adjust the time up to 4:00 (hr: min).
700 T m Owner’s Manual 27 W ork out Prog r ams (continued) INTERV AL TRAINER Getting Started The Inter val T rainer program helps to build the strength of your cardiovascular system. By alternating the workload from high speed to low speed & incline, your heart gets an effective workout.
28 700 T m Owner’s Manual W ork out Prog r ams (continued) A djustment • Press Speed “UP/DOWN” key or numeric quick key to adjust the speed any time during the program. The speed of the remaining segments will be updated to the new setting proportionally and the dot matrix window will update the speed profile accordingly as well.
700 T m Owner’s Manual 29 W ork out Prog r ams (continued) • Or press “ENTER” to enter program setup mode The dot matrix & data displays will take you through the program setup mode step b.
30 700 T m Owner’s Manual W ork out Prog r ams (continued) B eginning the Program During idle mode, the message display scrolls” SELECT A PROGRAM OR PRESS ST ART” messages, to begin this program, press “Classic Programs” key until “Random Hills” program LED indicator lights up.
700 T m Owner’s Manual 31 W ork out Prog r ams (continued) Pause, Reset, Restart, or Switch the program See Console section for details. THIGH BURNER Getting Started The program is designed to tone your Thighs & Gluts; it includes a series of up hill climb- ing exercises and a preset incline profile.
32 700 T m Owner’s Manual W ork out Prog r ams (continued) h eart rate”. Press “Select” button to switch the data displays. • Time display will show the selected program time and count down. • Speed display will start with speed of 3.0 mph.
700 T m Owner’s Manual 33 W ork out Prog r ams (continued) • Press “ST ART” key to accept current default values and begin Easy Jog program workout.
34 700 T m Owner’s Manual W ork out Prog r ams (continued) G LUTE TONER Getting Started The program is designed to tone your Glutes it includes a preset speed profile and a preset incline profile, plus message display prompts indicate when to work hard and when to relax.
700 T m Owner’s Manual 35 W ork out Prog r ams (continued) to the new setting and the dot matrix window will update the speed profile accordingly as well. • Press Incline “UP/DOWN” key or numeric quick key to adjust the incline any time during the program.
36 700 T m Owner’s Manual W ork out Prog r ams (continued) • Or press “ENTER” to enter program setup mode The dot matrix & data displays will take you through the program setup mode step b.
700 T m Owner’s Manual 37 W ork out Prog r ams (continued) time. It is ver y easy to see your speed improvement over time, because your time to get to 5K or 10K will be shorter and shor ter .
38 700 T m Owner’s Manual W ork out Prog r ams (continued) A djustment • Because the speed is calculated from your selected time, therefore the speed can not be adjusted during program run mode. • Press Incline “UP/DOWN” key or numeric quick key to adjust the incline from 0 -15%.
700 T m Owner’s Manual 39 W ork out Prog r ams (continued) IMPORT ANT : It is unsafe to exceed 95% of your maximum hear t rate while exercising. Please consult your physician before performing any Hear t Rate based training program.
40 700 T m Owner’s Manual W ork out Prog r ams (continued) o If there is a valid pulse, the Heart rate display will show the actual pulse reading. Adjustment • Computer will adjust the speed to achieve your Heart rate goal; therefore speed can not be adjusted during program run mode.
700 T m Owner’s Manual 41 W ork out Prog r ams (continued) Accepting Default values or Entering the program setting mode When the message display flashes, “HR INTERV ALS”, “PRESS ENTER”, it indicates you are about to select the HR Inter vals program.
42 700 T m Owner’s Manual W ork out Prog r ams (continued) b link. If there continues to be no pulse input, this console will maintain its current resistance setting and not changing until the program ends or is changed. o If there is a valid pulse, the Heart rate display will show the actual pulse reading.
700 T m Owner’s Manual 43 W ork out Prog r ams (continued) T raining within this zone develops basic endurance and aerobic capacity . • The Aerobic zone – 70% to 80% T raining within this zone to develop your cardiovascular system. • The Anaerobic zone – 80% to 90% T raining within this zone will develop your lactic acid system.
44 700 T m Owner’s Manual W ork out Prog r ams (continued) b link. If there continues to be no pulse input, this console will maintain its current resistance setting and not changing until the program ends or is changed. o If there is a valid pulse, the Heart rate display will show the actual pulse reading.
700 T m Owner’s Manual 45 W ork out Prog r ams (continued) gram LED indicator lights up. Accepting Default values or Entering the program setting mode When the message display flashes, “CARDIO TRAINING”, “PRESS ENTER”, it indicates you are about to select the Cardio T raining program.
46 700 T m Owner’s Manual W ork out Prog r ams (continued) • If STOP key is pressed twice during program run mode, the cool down mode will end and enter workout summar y mode. • There will be a beep sound to indicate the program ended. Pause, Reset, Restart, or Switch the program See Console section for details.
700 T m Owner’s Manual 47 W ork out Prog r ams (continued) Adjustment: It depends on the saved program; see the each program section for details. Ending the Program • When selected program time is up, this program will end and Cool down will be active.
48 700 T m Owner’s Manual W ork out Prog r ams (continued) p rogram. Program functions the same as a Classic program, see previous pages for details. • Or you can press & hold “STOP” key for 2 seconds to reset the console. Car dio coach B – Program T ime or Average Speed or T otal Distance calculations.
700 T m Owner’s Manual 49 Domestic w arr anty Information (Applies to all product sold and placed within the continental US, Alaska, Hawaii, and Puer to Rico only) Effective: August 2006 Diamondback warrants its 700TM treadmill to be free from defects in material and w orkmanship under normal use in the home and light instructional environments.
50 700 T m Owner’s Manual Domestic w arr anty Information (continued) W arranty voided if: The W arranty does not apply to any failure of the product, or any parts of the product, due to: assembly e.
700 T m Owner’s Manual 51 Maintenance CAUTION – FOR SAFE OPERA TION Always inspect hardware prior to any exercise session. T ur n power switch to the “OFF” position and unplug electrical cord from the outlet before attempting maintenance. Inspect unit for loose parts and frayed wires.
Maintenance (continued) 52 700 T m Owner’s Manual B oth a djustment screws should be tightened 1/4 turn in a clockwise direction with a wrench and the belt checked for slipping after each adjustment. If the belt continues to slip, repeat this process until the belt stops slipping.
53 Notes 700 T m Owner’s Manual 700tmOM 8/24/06 11:15 AM Page 55.
Notes 54 700 T m Owner’s Manual 700tmOM 8/24/06 11:15 AM Page 56.
W arr anty card 700 T m Owner’s Manual 55 Important! • Impor tant! • Important! • Impor tant! • Impor tant! • Important! W arranty card must be completed and returned to Diamondback within 15 days of purchase. Failure to comply may void manufacturer ’s W arranty .
Part no. 22-96-911 Diamondback Fitness 300 Camarillo Ranch Road Camarillo, CA 93012 T 800-776-7642 F 805-388-5890 Please refer to www .diamondbackfitness.com for instructions in French. Svp référez-vous www .diamondbackfitness.com pour instructions en français.
デバイスDiamondback 700の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Diamondback 700をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはDiamondback 700の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Diamondback 700の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Diamondback 700で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Diamondback 700を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はDiamondback 700の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Diamondback 700に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちDiamondback 700デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。