DiBossメーカーLT-40H6MVHの使用説明書/サービス説明書
ページ先へ移動 of 48
P/N: 500-087G.
Wide LCD-TV Instruction Manual Please r ead this manual car efully befor e operating your set. ● LT -40H6MVH ● LT -40T6MVH ● LT -46T6MVH.
.
Wa r nings Wa r nings 3 TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THE SET TO RAIN OR MOISTURE. NOTE TO CABLE/TV INST ALLER: This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the National Electric Code (U.
4 Wa r nings Wa r nings Cleaning Unplug the TV before cleaning the face of the LCD Screen. Dust the TV by wiping the screen and cabinet with a soft, clean cloth. If the screen requires additional cleaning, use a clean, damp cloth. Do not use liquid or aerosol cleaners.
5 Wa r nings Wa r nings Safety This LCD TV have been engineered and manufactured to assure your safety. You can prevent serious electrical shock and other hazards by keeping in mind the following. Do not place anything heavy, wet or magnetic on the LCD TV or the power cord.
IMPOR T ANT SAFETY INSTR UCTIONS IMPOR T ANT SAFETY INSTR UCTIONS 6 Important safeguards for you and your new pr oduct Your product has been manufactured and tested with your safety in mind. However, improper use can result in potential electrical shock or fire hazards.
IMPOR T ANT SAFETY INSTR UCTIONS IMPOR T ANT SAFETY INSTR UCTIONS 7 14. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.
8 Contents Contents u Warnings · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · .
9 Contents Contents u Before operating the set, please read this manual carefully. u External Equipment Connection · · · · · · · · · · · · · · · · · · · · · · · · · · · · .
10 Supplied Accessor ies Supplied Accessor ies u Make sure the following accessories are provided with Product. Battery installation Wide LCD-TV Instruction Manual Please read this manual carefully before operating your set.
11 Installation Installation u You can install the TV on a wall or place it on a table-like surface. u To eliminate any risk of injury from the TV falling, it should be mounted securely. Installation Options When the TV is placed into a cupboard, the distance between the TV and the wall have to leave minimum 60mm square as below.
12 Connecting Speak er Connecting Speak er L Connecting TV and Speaker (LT-40T6MVH/LT-46T6MVH) 1 Fix the bracket onto the guide pole located on the rear of TV and Speaker. 2 Clamp the speaker and the TV together fasten the screws. 3 Connecting the speaker audio cable to the external speaker output jack on the TV.
13 Controls Controls 1. ON/OFF Switches TV set on or off. 2. MENU Displays a menu. 3. ▼ CH ▲ (Channel Up/Down) Selects a channel or a menu item. 4. ◀ VOL ▶ (Volume Up/Down) Adjusts the volume./ Adjusts menu settings. 5. TV/AV Selects TV, VIDEO, S-VIDEO, COMPONENT1, COMPONENT2, PC ANALOG, HDMI.
14 Controls Controls 1. PC ANALOG IN (D-SUB) 2. HDMI (High Definition Multimedia Interface) IN Connect to the HDMI jack for device with HDMI output. 3. PC AUDIO IN Connect the audio cable from the PC to the PC AUDIO IN of the set. 4. H/P (Headphone out) Connect a headphone to this socket.
15 Controls Controls All the functions can be controlled with the remote controller. Some functions can also be adjusted with the buttons on the side panel of the set. Remote controller Before you use the remote controller, please install the batteries.
16 Controls Controls 15. SLEEP Sets the sleep timer. 16. Q.VIEW Returns to the previously viewed Channel. 17. PICTURE( ) Recalls your preferred picture setting. 18. SOUND( ) Recalls your preferred sound setting. 19. SAP Adjusts the MTS-stereo, Mono, SAP 20.
17 Basic Operation Basic Operation Program selection You can select a Program number with the CH x x /CH y y button or NUMBER buttons. Volume adjustment Press the VOL Ï Ï /VOL q q button to adjust the sound level. Q.VIEW Press the Q.VIEW button to view the last program you were watching.
18 Basic Operation Basic Operation On screen menu language selection The menu can be displayed on the screen in desired language. First select your language. 1 Press the MENU button. 2 Select the Setup menu with CH x x /CH y y button. 3 Press the Ï Ï q q button to select the Setup menu.
19 On Screen Menus and Display On Screen Menus and Display 1 Press the MENU button to display main menu. 2 Press the CH x x /CH y y button to select menus-Picture, Sound, Special, Setup. 3 Adjust each menu with the Ï Ï q q button. 4 Press the MENU button to return to preceding menu.
20 Setting up TV Program Setting up TV Program Once you have preset the program, you will be able to use the CH x x /CH y y or NUMBER buttons to scan the program you programmed. Program can be tuned using Auto or Manual program menu. ST ART T able V/UHF Auto Program All programs that can be received are stored by this method.
21 Setting up TV Program Setting up TV Program Manual Program Manual Program lets you manually tune and arrange the Channels in whatever order you desire. Also you can assign a Channel name with 8 characters to each channel number. 1 Press the MENU button.
22 Picture Control Picture Control You can adjust Color Temperature, Contrast, Brightness, Color, Sharpness and Tint(Only in NTSC mode) to the levels you prefer.
23 Picture Control Picture Control PICTURE Effect 1 Press the PICTURE( ) button. 2 Press the PICTURE( ) button repeatedly to select Picture effect. Each press of the button changes the screen display as below.
24 Sound Control Sound Control Manual Sound Control 1 Press the MENU button. 2 Select the Sound using the CH x x / CH y y button, and press the Ï Ï q q button. 3 Press the CH x x / CH y y button to select the desired sound item; Equalizer, Balance, AVL, SRS WOW or Headphone Volume.
25 Sound Control Sound Control SOUND Effect 1 Press the SOUND( ) button. 2 Press the SOUND( ) button repeatedly to select. Each press of the button changes the screen display as below. Auto Sound Control * The sound Flat, Music, Movie and Speech are programmed for good sound reproduction at the factory and cannot be changed.
Pa rental Control Pa rental Control 26 If used, this optional feature can “block” undesirable programming from appearing on the TV. Parental Control offers the user a wide variety of options and settings that restrict or “block” the programming that can appear on the TV.
Pa rental Control Pa rental Control 27 1. Press the MENU button. 2. Select the Setup menu. 3. Press the CH xy button to select the Parental Control, then press the Ïq button. 4. The “Enter Password” screen will appear. Enter your 4-digit password.
INFORMA TION INFORMA TION 28 GG eneral Audiences Content not offensive to most viewers PG PG-13 R NC-17 X No Rating Parental Guidance Suggested Parental Strongly Cautioned Restricted viewing No children under age 17 Hard Core Films No Rating Content is such that parents may not want their children to view the program.
INFORMA TION INFORMA TION 29 The sub-rating of TV rating Note ; The TV-Y7, TV-PG, TV-14 and TV-MA have additional options. See the next step to change. To set the FV, D, L, S and V sub-ratings, first select one of these TV-Ratings: TV-Y7, TV-PG, TV-14 and TV-MA Next, while the TV-Ratings is highlighted, repeatedly press the Ï Ï q q buttons.
Ca ptions Ca ptions 30 The captions is a process which converts the audio portion of a television program into written words which then appear on the television screen in a form similar to subtitles. Closed captions allow viewers to read the dialogue and narration of television programs.
31 Other functions Other functions The present time must be set for using the Clock function. Parental Control Caption Off Note Clock Setting the clock is necessary in order to use the various timer features of the TV. You can set automatic TV On or Off time.
32 Other functions Other functions Auto Sleep If you select Auto sleep on the set will automatically switch itself to standby mode approximately ten minutes after a TV program stops broadcasting. 1 Press the MENU button, select the Special . 2 Press the CH x x /CH button to select Auto sleep .
33 Other functions Other functions Childlock Childlock menu is necessary in order to disable the buttons on the front/side panel of the set. Especially it is useful to prevent unauthorized viewing. 1 Press the CH x x /CH button to select Childlock . 2 Press the Ï Ï q q button repeatedly to select On or Off .
34 Other functions Other functions Sleep timer You don’t have to remember to switch the set off before you go to sleep. The sleep timer automatically switches the set to standby after the preset time elapses. Press the SLEEP button to select the number of minutes.
35 Other functions Other functions Selecting a program in the program list Select a program with the CH x x /CH y y or Ï Ï q q button. Then press the OK button. The set switches to the chosen program number. Paging through a program list There are 5 program list pages in which contain 100 programs.
Exter nal Equipment Connection Exter nal Equipment Connection You can connect additional equipment, such as VCRs, camcorders etc. to your set. Examples are shown below. A/V IN 1 Connect the A/V out jacks on a VCR to A/V-IN jacks on the TV. 2 Press the TV/AV button to select VIDEO mode.
37 Exter nal Equipment Connection Exter nal Equipment Connection You can connect additional equipment, such as VCRs, camcorders etc. to your set. Examples are shown below. COMPONENT 1 IN / COMPONENT 2 IN 1 Use a component video cable to connect the DVD player’s Y/Pb/Pr jacks to the TV’s, Y/Pb(Cb)/Pr(Cr) jacks.
38 Exter nal Equipment Connection Exter nal Equipment Connection Headphone jack Insert the headphone plug to the headphone jack on the TV. You can listen to the sound through the headphone; no sound from the speaker on the TV. To adjust the headphone volume, use the Headphone menu in the Sound menu.
39 Connecting the PC as a monitor Connecting the PC as a monitor This function is possible only when the set is in PC mode. Use the TV/AV or TV/PC button on remote controller. Picture adjustment You can adjust picture Color Temperature, Contrast, Brightness, Color, Sharpness and ARC as you prefer.
40 Connecting the PC as a monitor Connecting the PC as a monitor Sound adjustment 1 Press the MENU button. 2 Select the Sound menu. 3 Press the CH x x / CH y y button to select the desired sound item; Equalizer, Balance, AVL, SRS WOW, Headphone or Input .
41 Connecting the PC as a monitor Connecting the PC as a monitor Setup This function is to adjust picture to left/right and up/down as you prefer. 1 Press the MENU button. 2 Select the Setup menu. 3 Press the CH x x / CH y y button to select the desired item.
42 Connecting the PC as a monitor Connecting the PC as a monitor PC INPUT 1 Connect the PC IN cable (D sub cable) from the monitor output socket of the PC to the PC ANALOG IN socket of the set. 2 Connect the PC AUDIO IN cable from the PC to the PC AUDIO IN of the set.
43 Product Specifications Product Specifications Model LT-40T6MVH/LT-40H6MVH LT-46T6MVH Television system NTSC Television program VHF: 2~13 UHF :14~69 Cable : 01~125 LCD Panel 40" Wide TFT LCD 46.
44 T roubleshooting T roubleshooting No picture on screen and no sound from speakers. No picture/No picture from AV terminal. Picture is displayed, but no sound from the speakers. Picture is too light There are stripes on the screen or color fade. Picture is too dark.
45 Memo Memo.
Memo Memo.
Memo Memo.
デバイスDiBoss LT-40H6MVHの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
DiBoss LT-40H6MVHをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはDiBoss LT-40H6MVHの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。DiBoss LT-40H6MVHの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。DiBoss LT-40H6MVHで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
DiBoss LT-40H6MVHを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はDiBoss LT-40H6MVHの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、DiBoss LT-40H6MVHに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちDiBoss LT-40H6MVHデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。