DigitusメーカーOptiMax DN-16037の使用説明書/サービス説明書
ページ先へ移動 of 18
DIGITUS Plug&V iew OptiV ision / OptiArc / OptiMax User Manual DN-16027 / DN-16036 / DN-16037 DN-16036 DN-16037 DN-16027.
2 1. Introduction: DIGITUS Plug&View series of IP cameras offers P2P Cloud service to avoid those complicated network setting for camera installation. All you need is just “Plug&View” with the 3 simple steps. 2. Package Content: - IP camera x 1 - Power supply x 1 - Ethernet cable x 1 - Support CD x 1 - Mounting accessory x 1 3.
3 Alternatively you can also download “DIG ITUS Plug&View” APP from APP store or Google Play and execute this APP from your mobile devices and login the account and password instead of using browser. 3. With browser, please key in the MAC address and Activation code as shown on the 1 st page of the QIG to add camera under your account.
4 5. Go to “Parameter” => “Network”. Change NetMode to “WiFi” and enable “DHCP”. Press “scan” to search the Wireless router or Access point in the environment and select the desired wireless device to connect. Please key in the password of the wireless router / Access Point.
5 4.0 Change Device Name Go to Settings and click Config button to lead to a Modify page for each camera. Y ou may change the name to any desired description.
6 5.0 T ool bar description T ool bar is located on the up-right-side of each IP cam media screen to foster an easy management at your preference. 5.1 Light Signal Green Sign al When you read the green light that means the IP cam is online and on air, therefore, its video is successfully displayed on the screen.
7 You may click to reload the live view media if you encounter problem getting it. Each selected camera’s configuration can be accessed by clicking on the right-bottom side of the screen. When the selected IP cam supports PTZ functio n, its PTZ control panel will be displayed for you to manage camera angle on the right-bottom side of the screen.
8 All recorded events are stored and marked in the timeline as in blue tag. Y ou may manage to view them in different t ime length: by clicking hour , day or week located on the top-left hand side of the timeline. The detailed recorded clips will be displayed when mouse over on the blue tag and th e tag turned to be in orange.
9 5.5 Cloud “ Cloud ” is utilized as a backup service to copy those video clips stored in camera’s SD card and save on to your personal Google Drive. Before you can review the clips stored in this “Cloud” service, you need to have a Google account and sign in.
10 Remove Remove button is the button for you to remove this specific IP cam media in Overview page. 6.0 Camera User Interface After entering Camera User Interface from DIGITUS Plug&View website through setting icon , please key in “ admin ” for the Username and Password to login.
11 After the download installed directly , refresh or re-login the IE interface after installation. Then the IE will go to default page and show the preview image. 6.1 Menu Description The camera UI has 5 functions (Home, Replay , Log, Parameter & Syste m).
12 Under Home, you can also control Pan & T ilt (only DN-16036 model) as well as the video settings such as brightness, contrast and saturation..
13 6.1.2 Log Log is used to record down all the events happened such as motion detection or alarm. 6.1.3 Parameters Network, Video Parameters, DDNS & UPnP , Video Cover , Motion Detection, CMOS Sensor , OSD Set and Alarm Set can be configured here.
14 Video Parameters Users can set the code rate, type, frame rate, image quality , etc. of the main stream in the Video Parameters Setting. The user can select the Main flow and Minor flow .
15 6.1.5 Motion Detection Please select “On” to enable motion detection. Use the mouse cursor to click the region for motion detection. The high-lighted colo r region is the motion detection region. 6.1.6 OSD Set Users can set T ime, Device Name a nd two other extended information on screen.
16 6.1.7 Alarm Set There are two kinds of alarm, Motion Detection Alarm and External Alarm . Users should choose the alarm check-box first to set the alarm action, such as Record, Capture. Please insert a SD/TF card to enable the functions. Users can set the alarm time.
17 6.2 System System Setting includes Local Settings, T ime Settings, System T ools, User and Device Information. 6.2.1 Local Settings Login options and video streaming options, select the type of stream video files and capture pictures and save path set in the Local Settings.
18 6.2.2 Time Settings Manual Setting, Sync with computer time, Sync with NTP and T ime Zone are optional. Users can choose the method they want. Manual Setting: e.g. 15:17:20 31st May , 201 1, please input 201 1-5-31 in the data blank and input ‘15’, ‘17’, ‘20’ in the time blank, then click ‘OK’.
デバイスDigitus OptiMax DN-16037の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Digitus OptiMax DN-16037をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはDigitus OptiMax DN-16037の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Digitus OptiMax DN-16037の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Digitus OptiMax DN-16037で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Digitus OptiMax DN-16037を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はDigitus OptiMax DN-16037の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Digitus OptiMax DN-16037に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちDigitus OptiMax DN-16037デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
