DODメーカーGS30の使用説明書/サービス説明書
ページ先へ移動 of 36
.
These symbols are internationally accepted symbols that warn of potential hazards with electrical products.The lightning flash means that there are dangerous voltages pr esent within the unit. The exclamation point indicates that it is necessary for the user to refer to the owners manual.
DECLARA TION OF CONFORMITY anufacturer’ s Name: DOD Electronics anufacturer’ s Address: 8760 S. Sandy Parkway Sandy , Utah 84070 eclares that the product: roduct Name: GS30 roduct Options: All (requires a Class II power adapter that conforms to the requirements of EN60065, EN60742, or equivalent).
T able of Contents fety Information................ I eclaration of Conformity .... II ble of Contents................. III ntroduction ongratulations................... 1 cluded Items................... 1 atures.............................. 1 Section One Guided T our .
ntroduction Congratulations! ou are now the proud owner of the GS30 complete guitar system. The GS30 is an extremely powerful tool capable of producing rtually any sound that you can imagine.
SECTION ONE - Introduction A Guided T our of the GS30 Front P anel Program Footswitches - These switches provide access to the GS30 user presets. They are also used to bypass the GS30, access the T uner , and perform various functions for the Learn-A-Lick feature.
3. Edit Section - These columns and buttons are used to select, bypass, and edit each specific effect group. The effects which are currently active within a preset are indicated by a lit LED. The button at the bottom of each column will select the effect group within the indicated column.
6. Speaker Simulator - This button is used to engage or disengage the Speaker Simulator . The LED will light when the Speaker Simulator is engaged. 7. Display - The Display serves four functions. In performance mode, the Display will indicate the Bank and Preset that is currently active.
R ear Panel A. Input Jack - Connect your instrument to this jack. B. Jam-A-long/Learn-A-Lick - Connect from the headphone output of your tape or CD player to this jack. This is used for playing along with your tapes and CD’ s, or recording material for the Learn-A-Lick function.
Getting Started he GS30 is ready for you to plug in and play . It already has a variety of sounds programmed into both the 30 ctory and 30 user Presets. Y ou will find that the User Presets are exact duplicates of the Factory Presets. The actory Presets are permanently written into the GS30 and cannot be changed.
. Connect your instrument to the GS30 input jack. a. (mono) Connect the left output to the input of your amplifier , or line input of a mixing console. b. (stereo) Connect the left and right outputs to the inputs of two amplifiers, or two line inputs of a mixing onsole.
SECTION TWO - About the GS30 Performance Mode he Performance Mode of the GS30 enables you to use the numbered footswitches or Data Wheel to change from ne Preset to another , the Bank Footswitches to change Banks and the Expression Pedal to vary the amount of the ssigned Parameter .
Footswitches he footswitches are also used to select a Preset. The Bank Up and Bank Down footswitches advance or reverse anks, and the 1-3 numbered footswitches select the Preset within the active Bank. Successive presses of the Bank p or Down switches will advance or decrease to the next Bank of Presets.
Accessing the T uner he GS30 includes a chromatic T uner to quickly get your instrument in tune. T o access the T uner , press and hold he numbered footswitch that is currently active (the footswitch with a lit LED above it) until the letters tn ppear in the display (and abreviation for tuner).
Learn-A-Lick/Jam-A-Long he Jam-A-Long feature lets you connect a tape or CD player to the GS30 and mix the music with your guitar gnal. The GS30 also includes a powerful teaching tool called “Learn-A-Lick”.
. Press the number 1 footswitch as you start your tape or CD player . The display will show rC indicating that it recording. It will record 16 seconds of incoming material. The Parameter Edit LEDs will light one at a time as our record time is used. .
SECTION THREE - Edit Mode Editing a Preset he GS30 allows you to edit the User Presets to your liking. Y ou can change the effects that are used in the Preset, ter the values of the effect Parameters, or bypass an effect. This is a very simple process and gives you the ability o create custom sounds to suit your application or taste.
Comp/Wah - This button will access the Compressor and W ah effects. Successive presses of this button ill toggle between the Compressor and the Wah. The selected effect is indicated by the flashing LED. The status f the selected effect can then be changed by rotating the Data Wheel.
5. Effect - This button will access the Modulation and Pitch shifting effects. The currently selected type of fect in this group is indicated by a flashing LED. Successive press of the Effect button will select a different type f effect within this group.
8. Spkr Sim - This button turns the Speaker Simulator on and off. The status of the Speaker Simulator is ndicated by the LED above this button. 9. Store - This button is used to save changes to Presets.
nce the desired effect or Parameter has been selected, you can set minimum and maximum values for the xpression Pedal. These are stop points which limit the range of variance for the Pedal. . - Press the Expression button a second time to set the toe up value.
Storing/Copying a Preset nce you have edited a Preset to your liking, you must store the changes in order for the GS30 to remember your ettings. There are three steps to storing a Preset. . Press the Store button once. The Store LED will flash and the User LED lights.
SECTION FOUR - Effects Definitions Compression - A compressor is a tool used to limit the dynamic range of an instrument. In other words, it ets a boundary for the volume the instrument will be able to reach. The nature of limiting the dynamics of an nstrument tends to provide a smooth, even texture to the sound of the instrument.
Noise Gate - A Noise Gate is a barrier that will close when you are not playing, and open when you are laying. When the gate is closed, it will not allow ambient noise to come through. A noise gate uses a threshold, hich is the volume level required to open the gate.
Ring Mod - The ring modulator modulates the guitar’ s volume and then takes the sum, and difference of the modulation frequency and instrument frequency , and mixes it with the original signal. The result is a metallic nging sound. Pixellator - A pixellator degrades the signal by undersampling it.
ith the Amount Parameter . The Amount Parameter determines the possible bend ranges and includes: 1u (1 ctave up), 7 (7 semitones above), 2 (2 semitones above), -2 (2 semitones below), 1d (1 octave down), and d (2 octaves down), 24 (2 semitones above to 4 semitones above), and 34 (3 semitones above to 4 semitones bove).
P arameter Definitions he following is a list of the Parameters available for editing and a description of how each Parameter will affect he sound of the corresponding effects. Speed - The Speed control adjusts how fast the Chorus, Flanger , Phaser , Ring Modulator , T remolo, Detuner , nveloped Phase, or Enveloped Flange will sweep back and forth.
SECTION FIVE - T utorial Creating a Preset uppose you want to create a Preset that has medium Compression, the Amp Modeling of a Stack with high Gain nd boosted highs and lows on the EQ, a low Threshold setting on the Noise Gate, a slow medium Chorus, no elay , and a Room Reverb.
tep 3. Assign the Expression Pedal to W ah - Press the Expression button. The LED next to Expression ssign begins to flash. If the Expression Pedal is currently assigned to a Parameter , the assigned Parameter’ s LED ill flash also.
tep 6 Select the Chorus Effect - Press the Effect button until the LED next to Chorus is flashing. If the Chorus bypassed (indicated by two dashes -- in the Display), rotate the Data Wheel until the Display shows on . ou will notice that the Parameter LEDs next to the words “Speed,” “Depth,” and “Level” are now lit.
tep 7 T urn the Delay off - Our Sample Preset called for no Delay to be used. So, press the Delay/Reverb utton and the LED next to Delay begins to flash. Rotate the Data Wheel counterclockwise until the Display shows wo dashes -- indicating that it is bypassed.
SECTION SIX - Other Stuff R esetting the GS30 his function erases all of the user presets and copies the factory Presets into the User Presets. Caution! This procedure will overwrite and reset ALL User Presets in the GS30 memory . Be sure you want to rase the memory and start fresh before continuing with this procedure.
. When the display reads tu , rock the pedal back to the toe up position and press the flashing number 1 Footswitch. . The display now reads td . Rock the Expression Pedal forward to the toe down position and press the flashing number 3 Footswitch. he expression pedal is now calibrated for use with all programs.
SECTION SEVEN - Appendix W arranty . The warranty registration card must be mailed within ten days after purchase date to validate the warranty of his DOD product. . DOD warrants this product when used solely within the U.S. to be free from defects and workmanship under ormal use and service.
Specifications nput: 1/4” unbalanced nput Impedance: 500 k ohms Max Input Level: 7.6 dBV utput: 2 - 1/4” unbalanced utput Impedance: 10 ohms Max Output Level: 11 dBV eadphone: 1/8” Stereo TRS eadphone Output Impedance: 10 ohms /D: 64 x oversampling, 24 bit delta sigma SP: 24 bit ower Supply: 10 volts AC, 780 mA (PS750) ower Consumption: 5.
DOD and GS30 are trade marks of the Harman Music Group Inc. Copyright the Harman Music Group Printed in the USA 05/99 Manufactured in the USA GS30 Owners Manual 18-6310-B Please visit DOD on the World Wide W eb at: http://www .dod.com DOD Electronics Corporation 8760 S.
デバイスDOD GS30の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
DOD GS30をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはDOD GS30の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。DOD GS30の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。DOD GS30で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
DOD GS30を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はDOD GS30の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、DOD GS30に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちDOD GS30デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
