Dodgeメーカー2006 LX Magnumの使用説明書/サービス説明書
ページ先へ移動 of 376
T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................. 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ........................... 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ..............
.
INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 䡵 How T o Use This Manual ................. 4 䡵 W arnings And Cautions .................. 6 䡵 V ehicle Identification Number .............. 6 䡵 V ehicle Modifications / Alterations .
INTRODUCTION This manual has been prepar ed with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a W arranty Information Booklet and various customer oriented documents.
INTRODUCTION 5 1.
W ARNINGS AND CAUTIONS This manual contains W ARNINGS against operating procedur es which could result in an accident or bodily injury . It also contains CAUTIONS against procedures which could result in damage to your vehicle. If you do not read this entir e manual you may miss important information.
VEHICLE MODIFICA TIONS / AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
.
THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W ord About Y our Keys ................. 1 1 ▫ Ignition Key Removal ................... 1 1 ▫ Key-In-Ignition Reminder ................ 1 2 ▫ Horn ............................... 1 2 䡵 Sentry Key .
▫ Power W indows ....................... 2 7 䡵 Occupant Restraints ..................... 3 0 ▫ Lap/Shoulder Belts ..................... 3 1 ▫ Pretensioners ......................... 3 5 ▫ Enhanced Seat Belt Reminder System (BeltAlert) ......
A WORD ABOUT YOUR KEYS Y ou can insert the double sided keys into the locks with either side up. The dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys fr om your dealer .
— if equipped. Refer to Personal Settings in the electronic vehicle information center (EVIC) Section of this manual for details. W ARNING! Leaving children in a vehicle unattended is danger- ous for a number of reasons. A child or others could be injured.
The Sentry Key Immobilizer System does not need to be armed or activated. Operation of the system is automatic regar dless of whether or not the vehicle is locked or unlocked. During normal operation, the V ehicle Theft Alarm Indi- cator Light will come on for three (3) seconds immedi- ately after the ignition switch is turned on for a bulb check.
At the time of purchase, the original owner is pr ovided with a four digit PIN number . This number is requir ed for dealer replacement of keys. Duplication of keys may be performed at an authorized dealer or by using the Customer Key Programming pr ocedure.
General Information The Sentry Key system complies with FCC rules part 15 and with RSS-210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference that may be received, including interfer ence that may cause undes- ired operation.
W ARNING! • For personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle. • When leaving the vehicle always remove the key from the ignition lock, and lock your vehicle.
Automatic Door Locks The doors will lock automatically on vehicles with power door locks if all of the following conditions are met: 1. The Auto Lock featur e is enabled. 2. The transmission is in gear . 3. All doors are closed. 4. The throttle is pressed.
3. Depress the power door lock switch to lock the doors. 4. A single chime will indicate the completion of the programming. Auto Unlock The doors will unlock automatically on vehicles with power door locks if: 1. The Auto Unlock featur e is enabled. 2.
For vehicles not equipped with the EVIC, the Auto Unlock feature can be enabled or disabled by performing the following procedur e: 1. Close all doors and place the key in the ignition. 2. Cycle the ignition switch between LOCK and ON and back to LOCK 4 times ending up in the LOCK position.
T o activate the system, open the rear door and move the child lock control, located near the door ’ s r ear latch, to the ON position. When the child lock system is engaged the door can be opened only by using the outside door handle even though the inside door lock is in the unlocked position.
T o unlock the doors: Press and r elease the UNLOCK button on the transmitter once to unlock the driver ’ s door , or twice to unlock all doors. The turn signal lights will flash twice to acknowl- edge the unlock signal. The illuminated entry system also turns on.
NOTE: Pressing the LOCK button on the keyfob while you are inside the vehicle will activate the Security Alarm. Opening a door with the Security Alarm activated will cause the alarm to sound.
center (EVIC) equipped vehicles, refer to ⬙ Personal Set- tings ⬙ in the Electronic V ehicle Information Center (EVIC) section of this manual. On non-EVIC equipped vehicles, perform the following steps: 1. Press and hold the UNLOCK button on the key fob.
T ransmitter Battery Service The recommended r eplacement battery is one CR2032 battery . NOTE: Do not touch the battery terminals that are on the back housing or the printed circuit boar d. 1. W ith the transmitter buttons facing down, remove the small screw , and separate the two halves of the transmit- ter .
T o arm the system: Remove the key from the ignition switch and either: 1. Press a power door lock switch while the driver ’ so r passenger ’ s door is open. 2. Press the LOCK button on the keyless entry transmit- ter . After the last door is closed, or if all doors are closed, the system will arm itself in about 16 seconds.
vehicle or not. If you remain in the vehicle and open a door , the alarm will sound. If this occurs, disarm the system. The alarm system will be activated when the battery is connected if the system was previously armed. The exterior lights will flash, the horn will sound, and the ignition will not start the vehicle.
W ARNING! • Driving with the liftgate open can allow poison- ous exhaust gases into your vehicle. Y ou and your passengers could be injured by these fumes.
The window lock switch on the driver ’ s door allows you to disable the window controls on the passenger doors. When the lock switch is pressed the window contr ols on the passenger doors will not illuminate and the passen- ger windows will be disabled.
T o close the window part way , lift the window switch to the first detent and release when you want the window to stop. The power window switches remain active for 10 min- utes after the ignition switch has been turned off. The time is customer programmable thr ough the electronic vehicle information center (EVIC) — if equipped.
open or partially open positions. This is a normal occur- rence and can be minimized. If the buf feting occurs with the rear windows open, open the fr ont and rear windows together to minimize the buffeting. If the buf feting occurs with the sunroof open, adjust the sunr oof opening to minimize the buffeting.
Lap/Shoulder Belts All seating positions in your vehicle are equipped with Lap/Shoulder Belts. The belt webbing retractor is designed to lock during very sudden stops or impacts. This feature allows the shoulder part of the belt to move freely with you under normal conditions.
2. The seat belt latch plate is above the back of your seat. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to make the belt go around your lap. 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “ click.
4. Position the lap belt across your thighs, below your abdomen. T o remove slack in the lap belt portion, pull up a bit on the shoulder belt. T o loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision.
W ARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system periodically , checking for cuts, frays, or loose parts. Damaged parts must be replaced immediately . Do not disassemble or modify the system.
As a guide, if you are shorter than average, you will prefer a lower position, and if you ar e taller than average, you ’ ll prefer a higher position. When you r elease the anchorage, try to move it up or down to make sure that it is locked in position.
driver should also instruct all other occupants to buckle their seat belts. Once the warning is triggered, the Enhanced W arning System (BeltAlert) will continue to chime and flash the Seat Belt W arning Light for 96 seconds or until the driver ’ s or front passenger ’ s seat belt is buckled.
seating position. Children 12 years old and under should be properly r estrained in the rear seat whenever possible. How T o Engage The Automatic Locking Mode 1. Buckle the combination lap and shoulder belt. 2. Grasp the shoulder portion and pull downward until the entire belt is extracted.
Driver and Right Front Passenger Supplemental Restraint System (SRS) - Airbag This vehicle has front airbags for both the driver and front passenger as a supplement to the seat belt r estraint systems. The driver ’ s airbag is mounted in the center of the steering wheel.
W ARNING! • Do not put anything on or around the front airbag covers or attempt to manually open them. Y ou may damage the airbags and you could be injured be- cause the airbags are no longer functional. These protective covers for the airbag cushions are de- signed to open only when the airbags are inflating.
Children that ar e not big enough to wear the vehicle seat belt properly (r efer to information on Child Restraint in this section) should be secured in the r ear seat in child restraints or belt-positioning booster seats.
Airbag System Components The front airbag system consists of the following: • Airbag Control Module • AIRBAG Readiness Light • P ASS AIRBAG OFF Readiness Light • Front Impact Accelerometer sen.
and column. If the key is in the “ LOCK ” position, in the ACC position, or not in the ignition, the airbags are not on and will not inflate. • The airbag control module also turns on the AIRBAG.
NOTE: A collision that is not severe enough to need airbag protection will not activate the system. This does not mean something is wrong with the airbag system.
NOTE: The interior lights can only be deactivated if the key is removed fr om the ignition switch or the vehicle is driven. Side Airbag System The airbag control module determines if a side collision is severe enough to r equire the airbag to inflate.
Occupant Classification System • The Occupant Classification System (OCS) is part of a Federally regulated safety system r equired for this vehicle. It is designed to turn off the fr ont passenger airbag in the unlikely event that a rear -facing infant seat is in the front passenger seat.
Front Passenger Seat Occupant Passenger Airbag Disable (P AD) Indicator Light Airbag Status Adult OFF ON Grocery Bags, Heavy Briefcases and Other Relatively Light Objects ON OFF Empty or V ery Small Objects OFF* OFF * Since the system senses weight, some small objects will turn the P AD Indicator Light on.
the P AD Indicator Light and the Airbag W arning Light are illuminated to show that the passenger airbag is turned off until the fault is clear ed. If an object is lodged under the seat and interferes with operation of the weight sensors, a fault will occur which turns on both the P AD Indicator Light and the Airbag W arning Light.
determine whether the front passenger airbag should be turned off. It also determines the rate of airbag inflation during a collision. • The Passenger Airbag Disabled (P AD) Indicator Light indicates to the driver and passenger when the airbag is turned OFF .
• Do not use prior or future model year seat covers not designated for the specific model being repair ed. Al- ways use the correct seat cover specified for the vehicle. • Do not replace the seat cover with an aftermarket seat cover . • Do not add a secondary seat cover other than those approved by DaimlerChrysler/Mopar .
associated with universities, and with hospital and insur- ance organizations. In the event that an investigation is undertaken by DaimlerChrysler (regar dless of initiative), the company or its desig.
• Accelerator status (including vehicle speed) • Engine control status (including engine speed) • Cruise contr ol status • T raction/stability control status Child Restraint Everyone in your vehicle needs to be buckled up all the time, babies and children, too.
one year old and weigh at least 9 kg (20 lbs). T wo types of child restraints can be used r earward-facing: infant carriers and “ convertible ” child seats. • The infant carrier is only used rearwar d-facing in the vehicle. It is recommended for childr en who weigh up to about 20 lbs (9 kg).
• The restraint must be appr opriate for your child ’ s weight and height. Check the label on the restraint for weight and height limits. • Carefully follow the instr uctions that come with the restraint. If you install the r estraint improperly , it may not work when you need it.
• Check belt fit periodically . A child ’ s squirming or slouching can move the belt out of position. • If the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle. Never allow a child to put the shoulder belt under an arm or behind their back.
Installing the LA TCH-Compatible Child Restraint System W e urge that you car efully follow the directions of the manufacturer when installing your child r estraint. Not all child restraint systems will be installed as described her e. Again, carefully follow the installation instr uctions that were pr ovided with the child restraint system.
cover directly behind the seat wher e you are placing the child restraint and attach the tether strap to the anchor - age, being careful to r oute the tether strap to provide the most direct path between the anchor and the child restraint.
The center rear seating position has an automatic locking retractor and has a distinctive label on the seat belt webbing. The seat belt must be in the automatic locking mode in order to enable a child r estraint to be tightly installed. Refer to “ Automatic Locking Mode ” in this section for details.
between the two posts. If not possible, lower the head restraint and pass the tether strap ar ound the outboard side of the head restraint. 2. Attach the tether strap hook of the child restraint to the tether anchor and remove slack in the tether strap according to the child r estraint manufacturer ’ s instruc- tions.
A new engine may consume some oil during its first few thousand miles (kilometers) of operation. This should be considered as a normal part of the br eak-in and not interpreted as an indication of dif ficulty . SAFETY TIPS Exhaust Gas W ARNING! Exhaust gases can injure or kill.
turned ON. If the LED is not lit during starting, have it checked. If the light stays on or comes on while driving, have the system checked by an authorized dealer . Defroster Check operation by selecting the defrost mode and place the blower control on high speed.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors .............................. 6 5 ▫ Inside Day/Night Mirror ................. 6 5 ▫ Automatic Dimming Inside Mirror — If Equipped .......................... 6 5 ▫ Driver ’ s Side Outside Mirror Auto Dimmer — If Equipped .
▫ Lumbar Support ....................... 9 0 ▫ Heated Seats — If Equipped .............. 9 0 ▫ Head Restraints ....................... 9 2 ▫ Folding Rear Seat ...................... 9 2 䡵 Adjustable Pedals — If Equipped ........... 9 3 䡵 T o Open And Close The Hood .
䡵 T raction Control System (TCS) — If Equipped .......................... 1 0 5 䡵 Brake Assist System (BAS) — If Equipped .... 1 0 6 䡵 Electronic Stability Pr ogram (ESP) — If Equipped .......................... 1 0 7 ▫ Synchronizing ESP .
▫ Ignition Off Operation .................. 1 2 0 ▫ Sunroof Fully Closed ................... 1 2 1 䡵 Electrical Power Outlets ................. 1 2 1 ▫ Electrical Outlet Use W ith Engine Off ....... 1 2 3 䡵 Cup Holders ......................
MIRRORS Inside Day/Night Mirror Adjust the mirror to center on the view thr ough the rear window . A two point pivot system allows for horizontal and vertical adjustment of the mirror . Annoying headlight glare can be r educed by moving the small control under the mirr or to the night position (toward r ear of vehicle).
CAUTION! T o avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror . Apply the solution onto a clean cloth and wipe the mirror clean.
Power Remote-Control Mirrors The power mirror switch is located on the driver ’ s door trim panel next to the power door lock switch. A rotary knob selects the left mirror , right mirror , or off position. After selecting a mirror move the knob in the same direction you want the mirr or to move.
HANDS – FREE COMMUNICA TION (UConnect ™ ) — IF EQUIPPED UConnect ™ is a voice-activated, hands-free, in- vehicle communications system. UConnect ™ allows you to dial a phone number with your cellular phone using simple voice commands (e.g., ⬙ Call ” ѧ “ Mike ” ѧ ” W ork ⬙ or ⬙ Dial ” ѧ “ 248-555-1212 ⬙ ).
The UConnect ™ system can be used with any Hands- Free Pr ofile certified Bluetooth ™ cellular phone. See www .chrysler .com/uconnect for supported phones. If your cellular phone supports a differ ent profile (e.g., Headset Profile), you may not be able to use any UCon- nect ™ features.
• For each feature explanation in this section, only the combined form of the voice command is given. Y ou can also break the commands into parts and say each part of the command, when you are asked for it.
The following are general phone to UConnect ™ System pairing instructions: • Press the ’ Phone ’ button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Setup Phone Pairing. ⬙ • When prompted, after the voice on beep, say ⬙ Pair a Phone.
Dial by Saying a Number • Press the ’ Phone ’ button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Dial. ⬙ • System will prompt you to say the number you want call. • For example, you can say ⬙ 234-567-8901.
Add Names to Y our UConnect ™ Phonebook NOTE: Adding names to phonebook is recommended when vehicle is not in motion. • Press the “ Phone ” button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Phonebook New Entry .
After you are finished editing an entry in the phonebook, you will be given the opportunities to edit another entry in the phonebook, call the number you just edited, or return to the main menu. ⬙ Phonebook Edit ⬙ can be used to add another phone number to a name entry that already exists in the phonebook.
• After confirmation, the phonebook entries will be deleted. List All Names in the UConnect ™ Phonebook • Press the ’ Phone ’ button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Phonebook List Names. ⬙ • The UConnect ™ system will play the names of all the phonebook entries.
on hold and answer the incoming call. NOTE: The UConnect ™ system compatible phones in market today do not support rejecting an incoming call when another call is in progr ess. Therefore, the user can only either answer an incoming call or ignore it.
Call T ermination T o end a call in progr ess, momentarily press the ⬘ Phone ’ button. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call. Redial • Press the ’ Phone ’ button to begin.
After selecting one of the languages, all prompts and voice commands will be in that language. NOTE: After every UConnect ™ language change op- eration, only the language specific 32 name phonebook is usable. The paired phone name is not language specific and usable across all languages.
NOTE: The T owing Assistance number dialed is based on the Country where the vehicle is pur chased (1-800- 528-2069 for USA, 1-877-213-4525 for Canada, 55-14-3454 for Mexico city and 1-800-712-3040 for outside Mexico city in Mexico).
Barge In - Overriding Prompts The ’ V oice Recognition ’ button can be used when you wish to skip part of a prompt and issue your voice recognition command immediately .
Mute/Un-mute (Mute off) When you mute the UConnect ™ system, you will still be able to hear the conversation coming from the other party , but the other party will not be able to hear you. In order to mute the UConnect ™ system: • Press the ’ V oice Recognition ’ button.
List Paired Cellular Phone Names • Press the ’ Phone ’ button to begin. • After the “ Ready ” prompt and the following beep, say “ Setup Phone pairing ” . • When prompted, say ⬙ List Phones. ⬙ • The UConnect ™ system will play the phone names of all paired cellular phones in or der from the highest to the lowest priority .
• When prompted say the priority number of the cellu- lar phone you wish to delete. Y ou can also press the ⬘ V oice Recognition ’ button anytime while the list is being played and say the priority number of the phone you wish to delete.
• Even though international dialing for most number combinations is supported, some shortcut dialing number combinations may not be supported. Far End Audio Performance • Audio quality is maximize.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 85 3.
86 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 87 3.
North American English Primary Alternate(s) Zero Oh Add location Add new All All of them Confirmation prompts Confirmations prompts Delete a name Delete Language Select language List names List all List paired phones List phones Pager Beeper Phone pairing Pairing Phonebook Phone book Return to main menu Return.
W ARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked.
Lumbar Support This feature allows you to incr ease or decrease the amount of lumbar support. T urn the control lever for - ward to incr ease and rearward to decr ease the desired amount of lumbar support.
Pressing the switch a second time will select low-level heating. Pressing the switch a thir d time will shut the heating elements off. When high-temperature heating is selected, the heaters provide a boosted heat level during the first four minutes of operation after heating is activated.
Head Restraints Head restraints can r educe the risk of whiplash injury in the event of impact from the r ear . Adjustable restraints should be adjusted so that the upper edge is as high as practical. The head restraints have a locking button which must be pushed in to lower the head restraint.
W ARNING! The cargo area in the rear of the vehicle (with the rear seatbacks in the locked-up or folded down position) should not be used as a play area by children when the vehicle is in motion. They could be seriously injured in an accident. Children should be seated and using the proper restraint system.
Press the switch r earward to move the pedals rearwar d (toward the driver). • The pedals can be adjusted with the ignition OFF . • The pedals can be adjusted while driving. • The pedals cannot be adjusted when the vehicle is in R (Reverse) or when the Speed Control is ON.
Use the hood prop r od (if equipped) to secure the hood in the open position. T o prevent possible damage, do not slam the hood to close it. Lower the hood until it is open approximately 6 inches (15 cm) and then drop it. This should secur e both latches.
Interior Lights The interior lights come on when a door is opened. T o protect the battery , the interior lights will turn off automatically 10 minutes after the ignition switch is moved to the LOCK position. This will occur if the interior lights were switched on manually or ar e on because a door is open.
odometer , Electronic V ehicle Information Center — if equipped, and radio when the parking lights or head- lights are on. Headlight Switch The headlight switch is located on the left side of the instrument panel.
Headlights, Parking Lights, Instrument Panel Lights Rotate the headlight switch clockwise to the first detent for parking light and instrument panel light operation. T urn to the second detent for headlight, park light and instrument panel light operation.
Headlights On With Wipers (A vailable with Auto Headlights Only) The headlights will turn on approximately 10 seconds after the wipers are turned on if the headlight switch is placed in the AUT O position. The headlights will also turn off when the wipers ar e turned off if they were turned on by this feature.
If the headlights are turned of f before the ignition, they will turn off in the normal manner . NOTE: The lights must be turned off within 45 seconds of turning the ignition off to activate this featur e The Headlight delay time is programmable on vehicles equipped with the Electronic V ehicle Information Center (EVIC).
WINDSHIELD WIPERS AND W ASHERS Windshield Wiper Operation — Front The front wipers and washers ar e operated by the multi-function lever . The lever is located on the left side of the steering column. Rotate the end of the control lever to select the desir ed wiper speed.
(EVIC) — If equipped. Refer to ” Headlights On W ith W ipers ” in the Electronic V ehicle Information Center section of this manual for details. Windshield Wiper Operation — Rear The rear wiper and washer is operated by the r ear wiper switch.
Rear W indshield W asher T o use the rear washer , push the right side of the windshield wiper/washer switch in and hold while spray is desired (maximum spray of 10 seconds). The wiper operates for 2 wipe cycles after the switch is released. Adding W asher Fluid The windshield washer and rear window washer shar e the same fluid reservoir .
TIL T/TELESCOPING STEERING COLUMN Unlock the steering column by pulling out the handle located directly below the column. T o tilt the column move the steering wheel up or down as desired. T o lengthen or shorten the steering column pull out or push in the steering wheel.
TRACTION CONTROL SYSTEM (TCS) — IF EQUIPPED W ARNING! TCS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded. The TCS cannot prevent accidents, includ- ing those resulting from excessive speed in turns, or hydroplaning.
T o turn the system back ON, press the traction contr ol switch a second time until the traction control Indicator turns OFF . NOTE: • The traction control system comes on each time the ignition switch is turned ON. This will occur even if you used the button to turn the system OFF .
W ARNING! BAS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking efficiency beyond that af forded by the condition of the vehicle brakes and tires or the traction afforded.
The ESP enhances dir ectional control and reduces driving wheel spin of the vehicle under various driving condi- tions. The system operates when the vehicle speed is greater than 7.8 mph (12.6 km/h). The ESP system corr ects for over/understeering of the vehicle by applying brakes to the appropriate wheel.
wheel slip control is active at vehicle speeds between approximately 24 mph (40 km/h) and 50 mph (80 km/h). CAUTION! If the vehicle is towed with the front axle raised, the engine must be shut off (key in the ignition switch to the OFF/LOCK or ACC position).
T o Activate: Push and release the speed contr ol lever ( “ ON/ OFF ” ) once and an indicator light will illumi- nate in the instrument cluster when the elec- tronic speed contr ol is active. T o turn the system OFF , Push and release the lever ( “ ON/OFF ” ) again and the system and indicator will turn off.
so that pushing the lever up and releasing thr ee times will increase speed by 3 mph (4.8 km/h), etc. T o decrease speed while speed contr ol is set, push the lever down and hold ( “ COAST ” ). Release the lever when the desired speed is r eached, and the new speed will be set.
OVERHEAD CONSOLE — IF EQUIPPED The overhead console contains courtesy/r eading lights, an optional universal garage door opener (HomeLink 威 ), storage for sunglasses, and optional power sunroof switches. Courtesy/Reading Lights At the forward end of the console ar e two courtesy/ reading lights.
GARAGE DOOR OPENER — IF EQUIPPED The HomeLink 威 Universal T ransceiver replaces up to three r emote controls (hand held transmitters) that oper- ate devices such as garage door openers, motorized gates, or home lighting. It triggers these devices at the push of a button.
Programming HomeLink NOTE: When programming a garage door opener , it is advised to park outside the garage. It is also recom- mended that a new battery be placed in the hand-held transmitter of the device being programmed to HomeLink for quicker training and accurate transmis- sion of the radio-frequency signal.
2. Position the end of your hand-held transmitter 1-3 inches (3-8 cm) away from the HomeLink buttons. 3. Simultaneously press and hold both the HomeLink button that you want to train and the hand-held trans- mitter buttons. Do not release the buttons until step 4 has been completed.
door opener may have a multiple security code system (rolling code system). Please pr oceed to steps 6 – 8t o complete the programming of a r olling code equipped device (most common garage door openers requir e this step). 6. At the garage door opener receiver (motor-head unit) in the garage, locate the ⬙ learn ⬙ or ⬙ smart ⬙ button.
3. Continue to press and hold the HomeLink button while you press and release every two seconds ( ⬙ cycle ⬙ ) your hand-held transmitter until the frequency signal has successfully been accepted by HomeLink. The EVIC display will show “ Channel X T rained ” (where X is Channel 1, 2, or 3).
Security If you sell your vehicle, be sure to erase the fr equencies by following the “ Erasing HomeLink Buttons ” instruc- tions in this section. This device complies with part 15 of FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference.
W ARNING! • Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death.
Pinch Protect Override If a known obstruction (ice, debris, etc.) pr events closing, press the switch forwar d and hold for two seconds after the reversal occurs. This allows the sunr oof to move towards the closed position. NOTE: Pinch protection is disabled while the switch is pressed.
For vehicles equipped with the EVIC, the power sunroof switch will remain active for up to 60 minutes after the ignition switch is turned off. Opening either fr ont door will cancel this feature.
The center console outlet is powered dir ectly from the battery (power available at all times). Items plugged into this outlet may discharge the battery and/or pr event engine starting.
The auxiliary outlet is also powered dir ectly from the battery (power available at all times). Items plugged into this outlet may discharge the battery and/or pr event engine starting. Electrical Outlet Use With Engine Off CAUTION! • Many accessories that can be plugged in draw power from the vehicle ’ s battery , even when not in use (i.
CUP HOLDERS Front Seat Cup Holders The cup holders are located in the forwar d edge of the center console. Rear Seat Cup Holders The rear seat cup holders ar e located in the center armrest between the rear seats.
STORAGE Console Features The center console contains a large storage bin. The storage bin contains a four-slot coin holder (designed to hold various size coins) and a rubber mat at the bottom of the bin for noise control. The bin is lar ge enough to hold a portable AC/DC converter to power laptops, games, or other electrical equipment.
The 60/40 split-folding rear seat pr ovides cargo-carrying versatility . The seatbacks fold down easily by pulling nylon tabs between the seatbacks and the bolsters. When the seats are folded down, they pr ovide a continuous, nearly flat extension of the removable tri-fold load floor .
Rollaway T onneau Cover — If Equipped The tonneau cover consists of a standard, r emovable rollaway tonneau cover that is mounted in the r ear cargo area behind the seats. Notches in the trim panels close to the liftgate secure the extended cover in place to keep items out of sight.
T o install the tonneau cover first insert either of the spring-loaded outer posts followed by the opposite end into the front attachment points shown. Next pull the tonneau cover using the handle and insert the rear posts by following the guides along each side of the rear compartment making sur e the cover is fully seated.
W aterproof Liner The optional waterproof liner can be placed over the lower load floor . Cargo Organizer The optional cargo or ganizer can also be placed into the lower load floor .
Cargo T ie-Down Hooks The tie-downs located on cargo ar ea floor and on the rear trim panels should be used to safely secure loads when vehicle is moving. W ARNING! • Cargo tie-down hooks are not safe anchors for a child seat tether strap. In a sudden stop or colli- sion a hook could pull loose and allow the child seat to come loose.
• Do not pile luggage or cargo higher than the top of the seatback. This could impair visibility or become a dangerous pr ojectile in a sudden stop or collision. W ARNING! T o help protect against personal injury , passengers should not be seated in the rear cargo area.
the T ire and Loading information placard for mor e information about cargo and load capacity . The placard is located either on the driver ’ s side “ B ” pillar or the driver door . Flip the lever up to attach or adjust the crossbars. Then turn lever counter-clockwise to loosen lower clamp.
W ARNING! Cargo must be securely tied before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in personal injury or property damage. Follow the Roof Rack Cautions when carrying cargo on your roof rack.
.
UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instruments And Controls ................ 1 3 8 䡵 Standard Instr ument Cluster .............. 1 3 9 䡵 Premium Instr ument Cluster .............. 1 4 0 䡵 Instrument Cluster Descriptions .........
▫ Operation Instructions - CD Mode ......... 1 6 3 ▫ Operation Instructions - Auxiliary Mode ..... 1 6 5 ▫ Operating Instructions - Hands Fr ee Phone — If Equipped ......................... 1 6 6 ▫ Operating Instructions - Satellite Radio — If Equipped .
▫ Selecting Satellite Mode In REF , RAQ, And RAK Radios ......................... 1 7 9 ▫ Selecting a Channel .................... 1 7 9 ▫ Storing And Selecting Pre-Set Channels ...... 1 8 0 ▫ Using The PTY (Pr ogram T ype) Button (If Equipped) .
INSTRUMENTS AND CONTROLS 138 UNDERST ANDING YOUR INSTRUMENT P ANEL.
ST ANDARD INSTRUMENT CLUSTER UNDERST ANDING YOUR INSTRUMENT P ANEL 139 4.
PREMIUM INSTRUMENT CLUSTER 140 UNDERST ANDING YOUR INSTRUMENT P ANEL.
INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON position. 2. T rip Odometer Button Standard Cluster The word ⬙ TRIP ⬙ will appear when this button is pr essed.
CAUTION! Driving with a hot engine cooling system could damage your vehicle. If temperature gauge reads (H), pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range.
9. Engine T emperature W arning Light This light illuminates, and will be accompanied by a single chime to warn of an overheated engine condition. The engine temperature is critically hot, and the vehicle should be turned off immediately . The vehicle should be serviced as soon as possible.
14. T ransmission Range Indicator This display indicator shows the automatic transmission gear selection. 15. Front Fog Light Indicator — If Equipped This light shows the front fog lights ar e ON. (See page 100 for more information.) 16. V oltage Light This light monitors the electrical system volt- age.
19. Electronic V ehicle Information Center Display — If Equipped When the appropriate conditions exist, this display shows the Electronic V ehicle Information Center (EVIC) messages. (See page 148 for more information.) (only on vehicles equipped with steering wheel mounted switches).
The operation of the Brake W arning Light can be checked by turning the ignition switch from the OFF position to the ON position. The light should illuminate for approxi- mately two seconds. The light should then turn off unless the parking brake is applied or a brake fault is detected.
23. Anti-Lock Brake Light — If Equipped This light monitors the Anti-Lock Brake System. The light will turn on when the ignition switch is turned to the ON position and may stay on for as long as four seconds.
ELECTRONIC VEHICLE INFORMA TION CENTER (EVIC) – If Equipped The Electronic V ehicle Information Center (EVIC) fea- tures a driver -interactive display . It is located in the instrument cluster below the speedometer . V ehicles equipped with steering wheel mounted buttons (de- scribed in this section) are also equipped with the EVIC.
Press the FUNCTION SELECT button to accept a selection. The FUNCTION SELECT button also advances the radio to the next preset station, changes the side of the tape being played (if so equipped), or changes the current CD track being played (if so equipped) when the EVIC is in the Compass/T emp/Audio screen.
• Left/Right Rear Door Ajar (one or more, with a single chime if speed is above 1 mph) • Door(s) Ajar (with a single chime if vehicle is in motion) • Liftgate Ajar (with a single chime) • Low .
• Distance T o Empty (DTE) Shows the estimated distance that can be travelled with the fuel remaining in the tank. This estimated distance is determined by a weighted average of the instantaneous and average fuel economy , according to the current fuel tank level.
Compass Display The compass readings indicate the dir ection the vehicle is facing. Press and r elease the compass button to display one of eight com- pass readings and the outside temperatur e. Automatic Compass Calibration This compass is self calibrating, which eliminates the need to manually set the compass.
T o set the variance: T urn the ignition switch ON. Then, press and hold the compass button for appr oximately 2 seconds. Then, press the SCROLL button until “ Compass V ariance ” displays in the EVIC. Both the “ Compass V ariance ” message and the last variance zone number will display in the EVIC.
• Caller ID phone number display . When the appropriate conditions exist, and if supported by the cell phone, the EVIC will display the following telephone symbols: The EVIC displays this symbol to indicate the signal strength of the UConnect ™ phone.
The EVIC displays this symbol to indicate that a phone connection has been made. The EVIC displays this symbol to indicate that the UConnect ™ phone is currently not avail- able. Navigation — If Equipped Navigation Display Control Press and r elease the MENU button until Navigation displays in the EVIC.
“ Language ” When in this display you may select one of five lan- guages for all display nomenclature, including the trip functions and the navigation system (if equipped). Press the FUNCTION SELECT button while in this display to select English, Espanol, Deutsch, Italiano, or Francais.
“ Flash Lights with Remote Key Lock ” When ON is selected, the front and r ear turn signals will flash when the doors are locked or unlocked with the remote keyless entry transmitter . This feature may be selected with or without the sound horn on lock feature selected.
“ Display Units of Measure in ” The EVIC, odometer , and navigation system (if equipped) can be changed between English and Metric units of measure. T o make your selection, press and release the FUNCTION SELECT button until “ US ” or “ METRIC ” appears.
Electrical Disturbances Radio waves may pick up electrical disturbances during transmission. They mainly affect the wave amplitude, and thus remain a part of the AM reception. They interfere very little with the fr equency variations that carry the FM signal.
SALES CODE REF — AM/FM/CD (SINGLE DISC) RADIO WITH OPTIONAL SA TELLITE RADIO AND HANDS FREE PHONE CAP ABILITY NOTE: The radio sales code is located on the lower right side of your radio faceplate. Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
SEEK Button (Radio Mode) Press and r elease the SEEK button to search for the next listenable station in either AM/FM or Satellite (if equipped) mode. Press the right side of the button to seek up and the left side to seek down. The radio will remain tuned to the new station until you make another selec- tion.
4. Adjust the minutes using the right side T une/Audio control. 5. T o exit, press any button/knob or wait 5 seconds. R W/FF (Radio Mode) Pressing the r ewind/fast forward button causes the tuner to search for the next fr equency in the direction of the arrows.
selected within 5 seconds after pressing the SET button, the station will continue to play but will not be stored into push-button memory . Y ou may add a second station to each push-button by repeating the above pr ocedure with this exception: Press the SET button twice and SET 2 will show in the display window .
SEEK Button (CD Mode) Press the right side of the SEEK button for the next track on the CD. Press the left side of the button to r eturn to the beginning of the current track, or r eturn to the beginning of the previous track if the CD is within the first 10 seconds of the current selection.
Press the RND button a second time to stop Random Play . Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device suc.
R W/FF (Auxiliary Mode) No function. RND/SET Button (Auxiliary Mode) No function. Mode Button (Auxiliary Mode) Press the mode button r epeatedly to select between the CD player or Satellite Radio (if equipped). Operating Instructions - Hands Free Phone — If Equipped Refer to the HANDS FREE PHONE (UConnect ™ ) section of the Owner ’ s Manual.
Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Press the ON/VOL control to turn the radio ON. Pr ess the ON/VOL a second time to turn OFF the radio.
3. After the hours are adjusted, press the right side T une/Audio control to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side T une/Audio control. 5. T o exit, press any button/knob or wait 5 seconds. INFO Button (Radio Mode) Press the INFO button for an RBDS station (one with call letters displayed).
RND/PTY Button (Radio Mode) Pressing this button once will turn on the PTY mode for 5 seconds. If no action is taken during the 5 second time out the PTY icon will turn of f. T urning the tune knob within 5 seconds will allow the program format type to be selected.
If a preset button is activated while in the PTY (Program T ype) mode, the PTY mode will be exited and the radio will tune to the preset station. NOTE: If you have selected a PTY with the tune knob, simply pressing the tune button in will go dir ectly to a “ PTY seek ” .
T ape Eject Press this button and the cassette will disen- gage and eject from the radio. Scan Button Press this button to play 10 seconds of each selection. Press the scan button a second time to cancel the featur e. Changing T ape Direction If you wish to change the direction of tape travel (side being played), press Pr eset 6.
Inserting Compact Disc(s) CAUTION! This CD player will accept 4 3/4 inch (12 cm) discs only . The use of other sized discs may damage the CD player mechanism. Y ou may eject a disc with the radio OFF . If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc.
Radio display will show ⬙ EJECTING DISC ⬙ when the disc is being ejected and prompt the user to r emove the disc. Press and hold the LOAD/EJT button for 5 seconds and all CDs will be ejected from the radio. If you have ejected a disc and have not removed it within 15 seconds, it will be reloaded.
Press and hold the FF button to fast forwar d through the tracks. Release the FF button to stop the fast forward feature. If the R W button is pressed, the current track will reverse to the beginning of the track and begin playing. Press the RND button a second time to stop Random Play .
Supported MP3 File Formats The radio will recognize only files with the *.mp3 exten- sion as MP3 files. Non-MP3 files named with the *.mp3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file.
T o increase the speed of disc loading, it is r ecommended to use CD-R media and single-session discs. T o create a single-session disc, enable the Disc at Once option before writing to the disc.
INFO Button (CD Mode for MP3 Play) Press and INFO button while playing MP3 or WMA disc. The radio scrolls thr ough the following T AG information: Song T itle, Artist, File Name, and Folder Name (if avail- able). Press the INFO button once mor e to return to ⬙ elapsed time ⬙ priority mode.
Operating Instructions - V ideo Entertainment System (VES) (If Equipped) Refer to separate “ V ideo Entertainment System (VES) Guide. ” SA TELLITE RADIO — IF EQUIPPED Satellite radio uses direct satellite to r eceiver broadcast- ing technology to provide clear digital sound, coast to coast.
ESN/SID Access W ith RAQ and RAK Radios W ith the ignition switch in the ACCESSOR Y position and the radio OFF , press the CD Eject and TIME buttons simultaneously for 3 seconds.
NOTE: Channels that may contain objectionable con- tent can be blocked. Contact Sirius Customer Care at 888-539-7474 to discuss options for channel blocking or unblocking.
• Dense tree coverage may interr upt reception in the form of short audio mutes. • Driving under wide bridges or along tall buildings can cause intermittent reception. • Placing objects over or too close to the antenna can cause signal blockage.
NA VIGA TION SYSTEM (SALES CODE REC) — IF EQUIPPED NOTE: The radio sales code is located on the lower right side of your radio faceplate. Raising The DVD Screen Remote Control Location 182 UNDERST A.
Navigation Radio with CD Player and MP3 Capability (REC) - combines a Global-Positioning System-based navigation system with a color screen to pr ovide maps, turn identification, selection menus and instructions for selecting a variety of destinations and routes.
V ehicles equipped with steering wheel mounted buttons are also equipped with the Electr onic V ehicle Information Center (EVIC). The EVIC features a driver -interactive display . This is located in the instrument cluster below the speedometer . The VOLUME button controls the sound level of the sound system.
T ape Player Operation Press the top of the SCROLL button once to listen to the next track on the cassette. Press the bottom of the SCROLL button once to either listen to the beginning of the current track or to listen to the beginning of the previous track if it is within 5 seconds after the curr ent track begins to play .
5. A loose tape should be corrected befor e use. T o rewind a loose tape, insert the eraser end of a pencil into the tape drive gear and twist the pencil in the requir ed directions. Maintain your cassette tape player . The head and capstan shaft in the cassette player can pick up dirt or tape deposits each time a cassette is played.
RADIO OPERA TION AND CELLULAR PHONES Under certain conditions, the cellular phone being On in your vehicle can cause erratic or noisy performance from your radio. This condition may be lessened or eliminated by relocating the cellular phone antenna. This condition is not harmful to the radio.
Press this button to turn on and of f the air condi- tioning. Cool dehumidified air comes through the outlets selected by the mode selector . Press the button a second time to turn off the air conditioning. The button includes an LED that illuminates when compres- sor operation is selected.
T emperature Control The temperature of air can be selected by rotating the temperatur e control knob in the center . The coldest tem- perature setting is on the extr eme left and the warmest setting on the ex- treme right of the r otation. The knob can be positioned at any point on the dial.
Recirculation The recir culation feature can be selected with the mode control knob. Y ou may choose between Bi-Level Recirculation and Panel Recirculation air outlets while in this mode. Normally , air enters from outside the vehicle. How- ever , when in Recirculation mode air inside the vehicle is re-used.
Operation of the system is quite simple. Begin by turning the right mode knob to AUTO, and place the blower control (left knob) to either LO AUTO or HI AUTO. The LO AUTO position should be used for front seat occu- pants only . The HI AUT O position should be used when more air flow is desir ed, or when rear seat occupants are present.
The system will automatically control r ecircu- lation. However , pressing this button will tem- porarily put the system in recir culation mode (ten minutes). This can be used when outside conditions such as smoke, odors, dust, or high humidity are pr esent.
UNDERST ANDING YOUR INSTRUMENT P ANEL 193 4.
The operator can override the AUTO mode setting and select the direction of the air by r otating the right mode knob to one of the following positions. • Defrost Air is directed to the windshield thr ough the outlets at the base of the windshield. Air is also directed to the fr ont door windows through the side window demister grilles.
Press this button to turn on the r ear window defroster and the heated side mirr ors (if equipped). An LED in the button will illuminate when the rear window defr oster is ON.
glycol antifreeze coolant in water is r ecommended. Refer to section 7, Maintenance Procedur es, of this manual for proper coolant selection. Winter Operation Use of the air Recirculation mode during winter months is not recommended because it may cause window fogging.
Operating Tips UNDERST ANDING YOUR INSTRUMENT P ANEL 197 4.
.
ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es .................... 2 0 2 ▫ Normal Starting ...................... 2 0 2 䡵 Engine Block Heater — If Equipped ........ 2 0 4 䡵 T ransmission Shifting ................... 2 0 4 ▫ 4 Speed Automatic T ransmission .
▫ Compact Spare T ire — If Equipped ......... 2 3 4 ▫ Limited Use Spare — If Equipped ......... 2 3 5 ▫ T ire Spinning ........................ 2 3 5 ▫ T read W ear Indicators .................. 2 3 6 ▫ Life Of T ire ....................
▫ Gross V ehicle W eight Rating (GVWR) ....... 2 5 2 ▫ Gross Axle W eight Rating (GA WR) ......... 2 5 2 ▫ Overloading ......................... 2 5 3 ▫ Loading ............................ 2 5 3 䡵 T railer T owing ........................ 2 5 4 ▫ Common T owing Definitions .
ST ARTING PROCEDURES CAUTION! Long periods of engine idling, especially at high engine speeds, can cause excessive exhaust tempera- tures which can damage your vehicle.
W ARNING! • Do not attempt to push or tow your vehicle to get it started. V ehicles equipped with an automatic transmission cannot be started this way . Un- burned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle.
After Starting The idle speed will automatically decrease as the engine warms up. ENGINE BLOCK HEA TER — IF EQUIPPED The engine block heater warms engine coolant and permits quicker starts in cold weather . Connect the cord to a standard 1 10-1 15 volt AC electrical outlet with a grounded, thr ee-wire extension cord.
W ARNING! It is dangerous to shift the selector lever out of “ P ” or “ N ” if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in re- verse. Y ou could lose control of the vehicle and hit someone or something.
The following indicators should be used to ensure that you have engaged the transmission shift lever into the P (Park) position: • When shifting into P (Park) move the lever all the way forward until it stops, and is fully seated. • Look at the shift indicator display on the instrument panel to ensure it is in the P (Park) position.
temperature of the transmission r eaches the appropriate temperature. Refer to the “ Note ” under “ T orque Con- verter Clutch ” later in this section. If the transmission temperature gets too hot, the transmission may downshift out of Overdrive or en- gage overdrive at higher vehicle speeds until the transmission cools down.
gear . When the vehicle speed drops or during accelera- tion, the clutch automatically and smoothly disengages. NOTE: • The torque converter clutch will not engage until the transmission fluid and engine coolant is warm (usu- ally after 1 – 3 miles (1.
5 Speed Automatic T ransmission W ARNING! Unintended movement of a vehicle could injure those in and near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle you should shift the transmission into Park, remove the key from the ignition, and apply the park brake.
Park Position The P ARK position is to be used when parking the vehicle. Engage only with the vehicle stopped. The P ARK position is not intended to serve as a brake when the vehicle is parked. Rather , the driver should always use the parking brake in addition to placing the selector lever in P ARK to secure the vehicle.
Neutral No power is transmitted from the engine to the drive axle. When the brakes are r eleased, the vehicle can be moved freely (pushed or towed). Do not engage in NEUTRAL position while driving except to coast when the vehicle is in danger of skidding (e.
NOTE: T o avoid overrevving the engine when the selector lever is moved in “ D- ” direction, the transmis- sion will not shift to a lower gear if the engine ’ s revolu- tions per minute limit would be exceeded. Briefly press the selector lever in the “ D+ ” direction.
A reset feature is available to allow the vehicle to be driven to a dealer for service. T o reset the transmission, use the following procedur e: 1. Stop the vehicle. 2. Move the selector lever to the P ARK position. 3. T urn off the engine. 4. W ait approximately 10 seconds.
Automatic T ransmission — General Information CAUTION! Damage to the transmission may occur if the follow- ing precautions are not observed: • Shift into P ARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed.
self-calibrating. Therefor e, the first few shifts on a new vehicle may be somewhat abrupt or soft until after the break-in period. This is a normal condition, and pr e- cision shifts will develop within a few shift cycles. W ARNING! It is dangerous to shift the selector lever out of P ARK or NEUTRAL if the engine speed is higher than idle speed.
Brake T ransmission Shift Interlock System This vehicle is equipped with a brake transmission shift interlock system (BTSI) that holds the gearshift lever in the P (Park) position when the ignition switch is in the LOCK position.
Y ou can shift in or out of the autostick mode at any time without taking your foot off the accelerator pedal. If you choose the Overdrive mode, the transmission will oper - ate automatically; shifting between the five available gears.
When parking on a hill, it is important to set the parking brake before placing the gear selector in Park, otherwise the load on the transmission locking mechanism may make it difficult to move the selector out of park. As an added precaution, turn the fr ont wheels toward the curb on a downhill grade and away from the curb on an uphill grade.
BRAKE SYSTEM In the event power assist is lost for any reason (for example, repeated brake applications with the engine off), the brakes will still function. The ef fort required to brake the vehicle will be much greater than that r equired with the power system operating.
W ARNING! • Anti-lock system (ABS) cannot prevent the natu- ral laws of physics from acting on the vehicle, nor can it increase braking or steering efficiency be- yond that afforded by the condition of the vehicle brakes and tires or the traction afforded.
ABS is activated during braking under certain road or stopping conditions. ABS-inducing conditions can in- clude ice, snow , gravel, bumps, railroad tracks, loose debris, or panic stops.
POWER STEERING The standard power steering system will give you good vehicle response and incr eased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason, the power assist is interr upted, it will still be possible to steer your vehicle.
MUL TI DISPLACEMENT SYSTEM (MDS) - 5.7L Engine Only This feature of fers improved fuel economy by shutting off four of the engine ’ s eight cylinders during light load and cruise conditions. The system is automatic with no driver inputs or additional driving skills requir ed.
T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standar ds ⴖ ....blank.... ⴖ = Passenger car tire based on Eur opean design standards LT = Light T ruck tire based on U.
EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry . H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions.
Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire however the date code may only be on one side. T ires with white sidewalls will have the full TIN including date code located on the white sidewall side of the tire.
Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressure is listed on either the face of the driver ’ s door or the driver ’ s side “ B ” pillar .
Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. Y ou will not exceed the tire ’ s load carrying capacity if you adhere to the loa.
6. If your vehicle will be towing a trailer , load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle.
230 ST ARTING AND OPERA TING.
W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle.
2. Economy — Improper inflation pr essures can cause uneven wear patterns to develop across the tir e tread. These abnormal wear patterns will reduce tr ead life resulting in a need for earlier tire r eplacement. Underinflation also increases tire rolling r esistance and results in higher fuel consumption.
CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap – if equipped. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressur es specified on the placard are always “ cold tire inflation pr essure ” .
W ARNING! High speed driving with your vehicle under maxi- mum load is dangerous. The added strain on your tires could cause them to fail. Y ou could have a serious accident. Don ’ t drive a vehicle loaded to the maximum capacity at continuous speeds above 75 mph (120 km/h).
Do not install a wheel cover or attempt to mount a conventional tire on the compact spar e wheel, since the wheel is designed specifically for the compact spare.
W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure someone. Do not spin your vehicle ’ s wheels faster than 35 mph (55 km/h) when you are stuck.
Life of Tire The service life of a tire is dependent upon varying factors including but not limited to: • Driving style • T ire pressur e • Distance driven W ARNING! T ires and spare tire should be replaced after six years, regardless of the remaining tread.
W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combina- tions of unapproved tires and wheels may change suspension dimensions and performance charac- teristics, resulting in changes to steering, han- dling, and braking of your vehicle.
ALL WHEEL DRIVE — IF EQUIPPED This feature pr ovides full time All Wheel Drive (A WD) with Antilock Brake System (ABS)/T raction Control. The front wheels pr ovide 38% of the torque, and the rear wheels provide 62% of the tor que. The system is auto- matic with no driver inputs or additional driving skills requir ed.
tire pr essures is low . The T ire Pressur e Monitoring T ell- tale Light will flash on and off for 10 to 60 seconds when a system fault is detected. The flash cycle will repeat every ten minutes or until the fault condition is removed and reset.
NOTE: • The TPMS can inform the driver of a low tire pr essure condition. • The TPMS is not intended to replace normal tir e care and maintenance, nor to provide warning of a tir e failure or condition. • The TPMS should not be used as a tire pr essure gauge while adjusting your tire pr essure.
Modules mounted in three of the four wheel wells, various T ire Pressur e Monitoring System Display Mes- sages in the EVIC, and T elltale Light. NOTE: For vehicles with optional wheel/tire sizes and s.
CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equip- ment that is not of the same size, type, and/or style.
The tire pr essure sensors are cover ed under one of the following licenses: United States ..................... KR5S120123 Canada ........................ 2671-S120123 TIRE CHAINS Use only compact chains, or other traction aids that meet SAE type “ Class S ” specifications.
NOTE: In order to avoid damage to tir es, chains, and your vehicle do not drive for a prolonged period of time on dry pavement. Observe the tire chain manufactur er ’ s instructions on method of installation, operating speed, and conditions for usage.
Section of this manual. More fr equent rotation is permis- sible if desired. The r easons for any rapid or unusual wear should be corrected prior to r otation being per- formed. The suggested rotation method is the “ forwar d-cross ” shown in the following diagram.
Spark Knock Light spark knock at low engine speeds is not harmful to your engine. However , continued heavy spark knock at high speeds can cause damage and immediate service is requir ed. Poor quality gasoline can cause problems such as har d starting, stalling and hesitations.
Problems that r esult from using methanol/gasoline blends are not the r esponsibility of the manufacturer . While MTBE is an oxygenate made from Methanol, it does not have the negative effects of Methanol. MMT In Gasoline MMT is a manganese containing metallic additive that is blended into some gasoline to increase the octane num- ber .
malfunctioning and may requir e immediate service. Contact your dealer for service assistance. • The use of fuel additives which are now being sold as octane enhancers are not r ecommended. Most of these products contain high concentrations of methanol.
ADDING FUEL Fuel Filler Cap (Gas Cap) The gas cap is located behind the fuel filler door on the left side of the vehicle. Push in on the left side (near the edge) of the fuel filler door to access the fuel filler cap. If the gas cap is lost or damaged, be sure the r eplacement cap is for use with this vehicle.
CAUTION! T o avoid fuel spillage and overfilling, do not “ top off ” the fuel tank after filling. When the fuel nozzle “ clicks ” or shuts off, the fuel tank is full. NOTE: • T ighten the gas cap until you hear a “ clicking ” sound. This is an indication that the gas cap is properly tightened.
VEHICLE LOADING The load carrying capacity of your vehicle is shown in the charts that follow . This information should be used for passenger and luggage loading as indicated. If the seatbacks are folded for carrying car go, do not exceed the specified GVWR and GA WR.
Overloading The load carrying components (axle, springs, tires, wheels, etc.) of your vehicle will provide satisfactory service as long as you do not exceed the GVWR and front and rear GA WR. The best way to figure out the total weight of your vehicle is to weigh it when it is fully loaded and ready for operation.
Front Axle Rear Axle Empty W eight 2054 lbs (932 kg) 1805 lbs (819 kg ) Load (Including driver , pass- sengers and cargo) 271 lbs (123 kg) 579 lbs (263 kg) T otal 2325 lbs (1055 kg) 2384 lbs (1081 kg).
W ARNING! It is important that you do not exceed the maximum front or rear GA WR. A dangerous driving condition can result if either rating is exceeded. Y ou could lose control of the vehicle and have an accident. T ongue W eight (TW) The downward for ce exerted on the hitch ball by the trailer .
T railer Hitch Classification Y our vehicle may be factory equipped for safe towing of trailers weighing over 2,000 lbs (907 kg) with the optional T railer T ow Prep Package. See your dealer for package content and for a trailer hitch engineered specifically for your vehicle.
T railer T owing Weights (Maximum T railer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/T ransmission Frontal Area Max. GTW (Gross T railer Wt.) Max. T ongue Wt. 2.7L Automatic 22 SQ.
Engine/T ransmission Frontal Area Max. GTW (Gross T railer Wt.) Max. T ongue Wt. 5.7L Automatic with trailer tow package 40 SQ. FT . (3.72 square meters) Up to 2 persons & Lug- gage 3,800 lbs (1724 kg) 380 lbs (172 kg) 40 SQ. FT . (3.72 square meters) Up to 3 persons & Lug- gage 3,000 lbs (1361 kg) 300 lbs (136 kg) 40 SQ.
T railer and T ongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer . This places 10% to 15% of the Gross T railer W eight (GTW) on the tow hitch of your vehicle.
T owing Requirements T o promote pr oper break-in of your new vehicle driv- etrain components the following guidelines are r ecom- mended: CAUTION! • A void towing a trailer for the first 500 miles (805 km) of vehicle operation. Doing so may damage your vehicle.
• V ehicles with trailers should not be parked on a grade. When parking, apply the parking brake on the tow vehicle. Put the tow vehicle automatic transmission in P for Park. Always, block or ⬙ chock ⬙ the trailer wheels. • GCWR must not be exceeded.
T owing Requirements — T railer Brakes − Do not interconnect the hydraulic brake system or vacuum system of your vehicle with that of the trailer . This could cause inadequate braking and possible personal injury . − An electronically actuated trailer brake contr oller is requir ed when towing a trailer with electronically actuated brakes.
The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector . Refer to the following illustrations. T owing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away fr om heavy traffic.
NOTE: Using the “ 3 ” range while operating the vehicle under heavy operating conditions will improve perfor - mance and extend transmission life by reducing exces- sive shifting and heat build up. This action will also provide better engine braking.
− Highway Driving Reduce speed. − Air Conditioning T urn off temporarily . − refer to Cooling System Operating information in the Maintenance section of this manual for more informa- tion.
.
WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flasher ................. 2 6 8 䡵 If Y our Engine Overheats ................ 2 6 8 䡵 Jacking And T ire Changing ............... 2 6 9 ▫ Preparations For Jacking ................ 2 7 0 ▫ Jack Location/Spare T ire Stowage .
HAZARD W ARNING FLASHER The hazard flasher switch is located in the center of the instrument panel below the center air outlets. T o engage the Hazard W arning Flashers, depress the switch on the instrument panel.
removes this heat. Y ou can also turn the T emperature control to maximum heat, the Mode contr ol to floor , and the fan control to HI. This allows the heater cor e to act as a supplement to the radiator and aids in removing heat from the engine cooling system.
W ARNING! Getting under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. Y ou could be crushed. Never get any part of your body under a vehicle that is on a jack. Never start or run the engine while the vehicle is on a jack.
Jack Location/Spare Tire Stowage The jack and spare tir e are both stowed under an access cover under the rear car go floor — if equipped. Follow these steps to access the jack and spare tir e. NOTE: The spare tir e must be removed in order to access the jack.
• Remove the fastener securing the spare tir e. • Remove the spare tir e. • Remove the fastener securing the jack. Lifting The Access Cover Spare T ire Fastener 272 WHA T TO DO IN EMERGENCIES.
Jacking and Changing a Tire 1. Block the wheel diagonally opposite the flat tire. Passengers should not remain in the vehicle when the vehicle is being jacked. 2. Remove the spare tire, jack and lug wr ench. 3. Before raising the vehicle, use lug wrench to car efully pry off center cap.
4. Before raising the vehicle loosen, but do not remove, the lug nuts of the flat tire using the lug wr ench. T urn the wheel nuts counterclockwise one turn while the wheel is still on the ground. 5. T urn the jack screw clockwise to firmly engage the jack saddle with the lift area of the sill flange, use the lift ar ea closest to the flat tire.
Jack Engagement Locations WHA T TO DO IN EMERGENCIES 275 6.
7. Remove the lug nuts, wheel cover (if equipped) and tire. Remove the cover by hand, do not pry of f. 8. Mount the spare tire. For vehicles equipped with wheel covers, see the wheel cover installation instruc- tions. Do not attempt to install a wheel cover on a compact spare.
Wheel Cover Installation (If Required) 1. T ighten the two lug nuts on the mounting studs on each side of the stud which is in alignment with the valve stem. 2. Align the valve notch in the wheel cover with the valve stem on the wheel. 3. Install the cover by hand, snapping the cover over the two lug nuts.
W ARNING! • Do not attempt to push or tow your vehicle to get it started. V ehicles equipped with an automatic trans- mission cannot be started this way . Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle.
of the vehicle with the discharged battery . Make sure you have a good contact on the engine ground. Refer to the following illustration for jump starting connections. 6. Start the engine in the vehicle which has the booster battery , let the engine idle a few minutes, then start the engine in the vehicle with the discharged battery .
partial or complete loss of vehicle control and stopping ability . T o reduce this possibility , the following precau- tions should be observed: 1. Slow down during rainstorms or when roads are slushy . 2. Slow down if road has standing water or puddles.
W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure someone. Do not spin your vehicle ’ s wheels faster than 35 mph (55 km/h) when you are stuck.
CAUTION! • Do not attempt to tow this vehicle from the front with sling type towing equipment. Damage to the front fascia will result. • The only approved method of towing is with a flat bed truck. • Do not tow the vehicle from the rear . Damage to the rear sheet metal, and fascia will occur .
MAINT AINING YOUR VEHICLE CONTENTS 䡵 2.7L Engine .......................... 2 8 5 䡵 3.5L Engine .......................... 2 8 6 䡵 5.7L Engine .......................... 2 8 7 䡵 Onboard Diagnostic System — OBD II ...... 2 8 8 䡵 Emissions Inspection And Maintenance Programs .
▫ Body Lubrication ..................... 3 0 2 ▫ W indshield W iper Blades ................ 3 0 3 ▫ W indshield W ashers ................... 3 0 3 ▫ Exhaust System ...................... 3 0 4 ▫ Cooling System ....................... 3 0 5 ▫ Hoses And V acuum/V apor Harnesses .
2.7L ENGINE 2.7L Engine Compartment MAINT AINING YOUR VEHICLE 285 7.
3.5L ENGINE 3.5L Engine Compartment 286 MAINT AINING YOUR VEHICLE.
5.7L ENGINE 5.7L Engine Compartment MAINT AINING YOUR VEHICLE 287 7.
ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems.
EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requir ement to pass an inspection of your vehicle ’ s emissions control system.
If your OBD system is not ready , you should see your authorized dealer or repair facility . If your vehicle was recently serviced or had a battery failur e or replacement, you may need to do nothing more than drive your vehicle as you normally would in order for your OBD system to update.
W ARNING! Y ou can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the proper equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic.
CAUTION! Overfilling or underfilling will cause oil aeration or loss of oil pressure. This could damage your engine. Checking Oil Level — 5.7L Engines T o assure pr oper engine lubrication, the engine oil must be maintained at the correct level. Check the oil level at regular intervals, such as every fuel stop.
CAUTION! Overfilling or underfilling will cause oil aeration or loss of oil pressure. This could damage your engine. CAUTION! Operating the engine with the oil levels below the safe zone, or operating with oil levels that exceed the top of the safe zone may cause engine damage.
recommends engine oils that ar e API certified and meet the requir ements of DaimlerChrysler Material Standard MS-6395. Use Mopar 威 or an equivalent oil meeting the specification MS-6395. American Petroleum Institute (API) Engine Oil Identification Symbol This symbol means that the oil has been certified by the American Petroleum Institute (API).
engine oil viscosity chart. SAE 5W -30 Engine Oil is allowed for use in the 3.5L Engine during cold weather only to improve cold weather starting. The engine oil filler cap also shows the recommended engine oil viscosity for your engine.
environment. Contact your dealer , service station, or governmental agency for advice on how and where used oil and oil filters can be safely discarded in your ar ea. Engine Oil Filter The engine oil filter should be replaced at every engine oil change.
Engine Air Cleaner Filter Under normal driving conditions, replace the air filter at the intervals shown on Schedule “ A. ” If, however , you drive the vehicle frequently under dusty or sever e con- ditions, the filter element should be inspected periodi- cally and replaced if necessary at the intervals shown on Schedule “ B.
CAUTION! Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition. In the event of engine malfunction, particularly involv- ing engine misfire or other apparent loss of perfor- mance, have your vehicle serviced promptly .
• Do not try to start engine by pushing or towing the vehicle. • Do not idle the engine with any spark plug wires disconnected or removed, such as when diagnostic testing, or for prolonged periods during very r ough idling or malfunctioning operating conditions.
W ARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Don ’ t allow battery fluid to contact your eyes, skin or clothing. Don ’ t lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area imme- diately with large amounts of water .
W ARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs.
Refer to the “ Maintenance Schedules ” section of this manual for the recommended air conditioning filter replacement intervals. Power Steering — Fluid Check Checking the power steering fluid level at a defined service interval is not requir ed.
underhood services, the hood latch, r elease mechanism and safety catch should be cleaned and lubricated. The external lock cylinders should be lubricated twice a year , preferably in the fall and spring. Apply a small amount of a high quality lubricant such as Mopar 威 Lock Cylinder Lubricant or equivalent directly into the lock cylinder .
Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system. Whenever a change is noticed in the sound of the exhaust system, .
Cooling System W ARNING! • When working near the radiator cooling fan, dis- connect the fan motor lead or turn the ignition switch to the OFF position. The fan is temperature controlled and can start at any time the ignition switch is in the ON position.
Cooling System — Drain, Flush and Refill At the intervals shown on the Maintenance Schedules, the system should be drained, flushed and refilled. If the solution is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner .
extended maintenance period, it is important that you use the same coolant throughout the life of your vehicle. Please review these r ecommendations for using Hybrid Organic Additive T echnology (HOA T) coolant.
Disposal of Used Engine Coolant Used ethylene glycol based engine coolant is a regulated substance requiring pr oper disposal. Check with your local authorities to determine the disposal rules for your community .
• If frequent coolant additions ar e required, or if the level in the coolant recovery bottle does not dr op when the engine cools, the cooling system should be pres- sure tested for leaks.
Brakes In order to assur e brake system performance, all brake system components should be inspected periodically . Suggested service intervals can be found in the Mainte- nance Schedules section of this manual. W ARNING! Riding the brakes can lead to brake failure and possibly an accident.
W ARNING! W orn brake hoses can burst and cause brake failure. Y ou could have an accident. If you see any signs of cracking, scuffing, or worn spots, have the brake hoses replaced immediately .
CAUTION! Do not allow petroleum base fluid to contaminate the brake fluid, all brake seal components could be damaged causing partial or complete brake failure.
CAUTION! The fluid level is preset at the factory and does not require adjustment under normal operating condi- tions. If a transmission fluid leak occurs, visit your authorized dealer immediately . Severe damage to the transmission may occur . Y our authorized dealer has the proper tools to accurately adjust the fluid level.
Fluid Changes The fluid should be changed as follows: Normal Usage No Service Required Severe Usage Front Dif ferential No Service Required T ransfer Case Refer to Maintenance Schedule “ B ” Severe Usage is defined as: 1.
• Stone and gravel impact. • Insects, tree sap and tar . • Salt in the air near seacoast localities. • Atmospheric fallout/industrial pollutants. W ashing • W ash your vehicle regularly . Always wash your ve- hicle in the shade using Mopar 威 Car W ash or a mild car wash soap, and rinse the panels completely with clear water .
• All wheels and wheel trim, especially aluminum and chrome plated wheels should be cleaned r egularly with a mild soap and water to prevent corr osion. T o remove heavy soil, use Mopar 威 Wheel Cleaner or select a nonabrasive, non-acidic cleaner .
W ARNING! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may cause respiratory harm. Glass Surfaces All glass surfaces should be cleaned on a regular basis with Mopar 威 Glass Cleaner or any commercial household-type glass cleaner .
• Soak the rubber cup holder liner in a mixtur e of medium hot tap water and one teaspoon of mild liquid dish soap. Let soak for approximately one hour . • After one hour pull the liner from the water and dip it back into the water about six times.
CAUTION! • When installing the Power Distribution Center cover , it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the Power Distribu- tion Center , and possibly result in a electrical system failure.
Cavity Fuse Circuits 13 —— 14 25 Amp Clear Powertrain Control Module (PCM) 15 25 Amp Clear Injectors, Ignition Coils 16 —— 17 30 Amp Pink Antilock Brakes System (ABS) V alves/Powertrain Contro.
Rear Power Distribution Center There is also a power distribution center located in the rear compartment under the spar e tire access panel. This center contains fuses and relays.
CAUTION! • When installing the Power Distribution Center cover , it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the Power Distribu- tion Center , and possibly result in a electrical system failure.
Cavity Fuse Circuits 1 1 25 Amp C/BRKR Cluster - without power memory seat/Driver Seat Switch - with power memory seat/Memory Module - if equipped 12 25 Amp C/BRKR Passenger Seat Switch 13 25 Amp C/BR.
Cavity Fuse Circuits 30 10 Amp Red Door Modules/Power Mirrors - if equipped/Steering Control Module 31 —— 32 —— 33 —— 34 —— 35 5 Amp Orange Amplifier - if equipped/ Antenna/Ignition De.
VEHICLE STORAGE If you are leaving your vehicle dormant for mor e than 21 days you may want to take steps to protect your battery . Y ou may: • Disconnect the negative cable from the battery . • Anytime you store your vehicle, or keep it out of service (i.
LIGHT BULBS — Exterior Bulb Number Low Beam Headlight ..................... 9006 High Beam Headlight ..................... 9005 Front Park/T urn Light ................... 3457A Front Fog Light — If Equipped ............ 9145/H10 (Serviced at Dealer) Front Sidemarker .
• Replace the bulb and push into socket assembly . Reinstall the socket assembly , and turn clockwise. CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol.
T ail/Stop, T urn Signal Light, and Backup Light 1. Open the liftgate. 2. Remove tail light access cover . 3. Push the tail light electrical connector locking tab to the side. 4. Disconnect the electrical connector . 5. Remove 1 wingnut from the back of the tail light assembly .
7. Pull tail light assembly clear from vehicle to access bulbs. T urn bulb sockets counter-clockwise to r emove. 8. Pull the appropriate bulb to remove it fr om the socket.
9. Replace the bulb, reinstall the socket, and reattach the tail light assembly . 10. Close the liftgate. License Light 1. Remove the screws securing the light to the rear fascia. 2. Remove the bulb and socket assembly and pull the bulb from the socket.
FLUIDS AND CAP ACITIES U.S. Metric Fuel (approximate) 2.7 Liter Engines (87 Octane) 18 gallons 68 liters 3.5 Liter Engines without All Wheel Drive (87 to 89 Octane) 18 gallons 68 liters 3.5 Liter Engines with All Wheel Drive (87 to 89 Octane) 19 gallons 72 liters 5.
FLUIDS, LUBRICANTS AND GENUINE P ARTS Engine Component Fluids, Lubricants and Genuine Parts Engine Coolant Mopar 威 Antifr eeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Or- ganic Additive T echnology) or equivalent. Engine Oil (2.7 Liter) Use API Certified engine oil.
Chassis Component Fluids, Lubricants and Genuine Parts Automatic T ransmission Mopar 威 A TF+4 Automatic T ransmission Fluid or equivalent. Brake Master Cylinder Mopar 威 DOT 3, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable.
.
MAINTENANCE SCHEDULES CONTENTS 䡵 Emission Control System Maintenance ...... 3 3 6 䡵 Maintenance Schedules .................. 3 3 6 ▫ Schedule “ B ” .
EMISSION CONTROL SYSTEM MAINTENANCE The “ Scheduled ” maintenance services, listed in bold type must be done at the times or mileages specified to assure the continued pr oper functioning of the emission control system.
• Extensive engine idling. • Driving in dusty conditions. • Short trips of less than 10 miles (16.2 km). • More than 50% of your driving is at sustained high speeds during hot weather , above 90 ° F (32 ° C). • T railer towing. 〫 • T axi, police, or delivery service (commercial ser - vice).
At Each Stop for Fuel • Check the engine oil level about 5 minutes after a fully warmed engine is shut off. Checking the oil level while the vehicle is on level ground will impr ove the accu- racy of the oil level reading. Add oil only when the level is at or below the ADD or MIN mark.
SCHEDULE “ B ” Follow Schedule “ B ” if you usually operate your vehicle under one or more of the following conditions. Change the automatic transmission fluid and filter every 60,000 miles (100 000 km) if the vehicle is usually operated under one or more of the conditions marked with an 〫 .
Miles 3,000 6,000 9,000 12,000 15,000 18,000 (Kilometers) (5 000) (10 000) (15 000) (20 000) (25 000) (30 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Inspect the air cleaner filter and replace if r e- quired.* XXXX X Replace the air cleaner filter .
Miles 21,000 24,000 27,000 30,000 33,000 36,000 (Kilometers) (35 000) (40 000) (45 000) (50 000) (55 000) (60 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Inspect the air cleaner filter and replace if r e- quired.
Miles 39,000 42,000 45,000 48,000 51,000 54,000 (Kilometers) (65 000) (70 000) (75 000) (80 000) (85 000) (90 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Inspect the air cleaner filter and replace if r e- quired.
Miles 57,000 60,000 63,000 66,000 69,000 72,000 (Kilometers) (95 000) (100 000) (105 000) (1 10 000) (1 15 000) (120 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Inspect the air cleaner filter and replace if r e- quired.
Miles 75,000 78,000 81,000 84,000 87,000 90,000 (Kilometers) (125 000) (130 000) (135 000) (140 000) (145 000) (150 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Inspect the air cleaner filter and replace if r e- quired.
Miles 93,000 96,000 99,000 102,000 105,000 (Kilometers) (155 000) (160 000) (165 000) (170 000) (175 000) Change engine oil and engine oil filter , if not re- placed at 3 months. XXXXX Inspect the air cleaner filter and replace if r e- quired.* XXXX Replace the air cleaner filter .
Miles 108,000 11 1,000 1 14,000 1 17,000 120,000 (Kilometers) (180 000) (185 000) (190 000) (195 000) (200 000) Change engine oil and engine oil filter , if not re- placed at 3 months. XXXXX Inspect the air cleaner filter and replace if r e- quired.* XXXX Replace the air cleaner filter .
SCHEDULE “ A ” Miles 6,000 12,000 18,000 24,000 30,000 36,000 (Kilometers) (10 000) (20 000) (30 000) (40 000) (50 000) (60 000) [Months] [6] [12] [18] [24] [30] [36] Change engine oil and engine oil filter . X XXXXX Inspect the air cleaner filter and replace if r e- quired.
Miles 42,000 48,000 54,000 60,000 66,000 72,000 (Kilometers) (70 000) (80 000) (90 000) (100 000) (1 10 000) (120 000) [Months] [42] [48] [54] [60] [66] [72] Change engine oil and engine oil filter . X X X X X X Inspect the air cleaner filter and replace if requir ed.
Miles 78,000 84,000 90,000 96,000 102,000 (Kilometers) (130 000) (140 000) (150 000) (160 000) (170 000) [Months] [78] [84] [90] [96] [102] Change engine oil and engine oil filter . X X X X X Inspect the air cleaner filter and replace if r e- quired.* XX X X Replace the air cleaner filter .
Miles 108,000 1 14,000 120,000 (Kilometers) (180 000) (190 000) (200 000) [Months] [108] [1 14] [120] Change engine oil and engine oil filter . X X X Inspect the air cleaner filter and replace if r equired.* X X Replace the air cleaner filter . X Inspect the front and r ear brake linings and rotors.
IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V ehicle .............................. 3 5 2 ▫ Prepar e For The Appointment ............ 3 5 2 ▫ Prepar e A List ........................ 3 5 2 ▫ Be Reasonable W ith Requests .
SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you ’ re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty , discuss additional charges with the service manager .
• If for some reason you ar e still not satisfied, talk to the general manager or owner of the dealership. They want to know if you need assistance. • If your dealership is unable to resolve the concern, you may contact the Manufacturer ’ s Customer Center .
Service Contract Y ou may have purchased a service contract for your vehicle to help protect you fr om the high cost of unex- pected repairs after your manufactur er ’ s new vehicle limited warranty expires. The manufactur er stands be- hind only the manufacturer ’ s Service Contracts.
REPORTING SAFETY DEFECTS In the 50 United States and W ashington D.C.: If you believe that your vehicle has a defect which could cause a crash or cause injury or death, you should immediately inform the National Highway T raffic Safety Administra- tion (NHTSA) in addition to notifying the manufacturer .
Corporation vehicles. A complete working knowledge of the vehicle, system and/or components is written in straightforward language with illustrations, diagrams and charts.
T readwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under contr olled con- ditions on a specified government test course. For ex- ample, a tire graded 150 would wear one and a half (1 1/2) times as well on the government course as a tire graded 100.
W ARNING! The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive load- ing, either separately or in combination, can cause heat buildup and possible tire failure.
INDEX 10.
ABS (Anti-Lock Brake System) ............. 2 1 9 Adding Engine Coolant (Antifreeze) ......... 3 0 6 Adding Fuel .......................... 2 5 0 Adding W asher Fluid ................. 103,303 Additives, Fuel ........................ 2 4 8 Adjustable Pedals .
Ball Joints ............................ 3 0 2 Battery ............................... 2 9 9 Jump Starting ........................ 2 7 7 Keyless T ransmitter Replacement (RKE) ..... 2 4 Location ......................... 278,299 Bearings ............
Clean Air Gasoline ...................... 2 4 7 Climate Control ........................ 1 8 7 Clock .......................... 161,167,183 Compact Disc (CD) Maintenance ........... 1 8 6 Compact Spare T ire ..................... 2 3 4 Compass .......
Electric Remote Mirrors ................... 6 7 Electrical Power Outlets .................. 1 2 1 Electronic Speed Contr ol (Cruise Control) ..... 1 0 9 Electronic Stability Pr ogram (ESP) .......... 1 0 7 Electronic V ehicle Information Center (EVIC) .
Flash-T o-Pass .......................... 1 0 0 Flat T ire Changing ...................... 2 6 9 Floor Console .......................... 1 2 5 Fluid Capacities ........................ 3 3 1 Fluid Leaks ............................ 6 0 Fluid Level Checks Brake .
Hands-Free Phone (UConnect ™ ) ............ 6 8 Hazard W arning Flasher .................. 2 6 8 Head Restraints ......................... 9 2 Headlights High Beam .......................... 1 0 0 High Beam/Low Beam Select Switch ...... 1 0 0 On W ith W ipers .
Key-In Reminder ........................ 1 2 Keyless Entry System ..................... 2 0 Keys ................................. 1 1 Knee Bolster ........................... 3 8 Lap/Shoulder Belts ...................... 3 1 LA TCH (Lower Anchors and T ether for CHildren) .
Capacities ........................... 2 5 3 T i r e s ............................... 2 2 7 Locks Door ............................... 1 5 Lower Anchors and T ether for CHildren (LA TCH) .............................. 5 5 Lubrication, Body ..........
Identification Logo .................... 2 9 4 Materials Added to .................... 2 9 5 Recommendation .................. 293,331 Synthetic ........................... 2 9 5 V iscosity ......................... 294,331 Onboard Diagnostic System .
Radio (Sound Systems) ................ 160,166 Rear Liftgate ........................... 2 6 Rear Seat, Folding ....................... 9 2 Rear W indow Defroster .................. 1 8 8 Rearview Mirrors ........................ 6 5 Reclining Front Seats .
Selection of Coolant (Antifreeze) ......... 306,332 Self-Sealing T ires ....................... 2 3 9 Sentry Key (Immobilizer) .................. 1 2 Service Assistance ...................... 3 5 2 Service Contract ........................ 3 5 4 Service Engine Soon Light (Malfunction Indicator) .
T ilt Steering Column .................... 1 0 4 T ire and Loading Information Placard ....... 2 2 7 T ire Identification Number (TIN) ........... 2 2 6 T ire Markings ......................... 2 2 3 T ire Safety Information ................... 2 2 3 T i r e s .
T railer and T ongue W eight .............. 2 5 9 W iring ............................. 2 6 2 T railer T owing Guide .................... 2 5 7 T railer W eight ......................... 2 5 7 T ransmission .......................... 3 1 2 Automatic .
Power .............................. 2 7 W indshield Defroster ................. 189,194 W indshield W ashers ............... 101,102,303 W indshield W iper Blades ................. 3 0 3 W indshield W ipers ...................... 1 0 1 W iper Blade Replacement .
374 INDEX.
NOTES.
NOTES.
デバイスDodge 2006 LX Magnumの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Dodge 2006 LX Magnumをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはDodge 2006 LX Magnumの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Dodge 2006 LX Magnumの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Dodge 2006 LX Magnumで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Dodge 2006 LX Magnumを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はDodge 2006 LX Magnumの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Dodge 2006 LX Magnumに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちDodge 2006 LX Magnumデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
