Dodgeメーカー2007 Nitroの使用説明書/サービス説明書
ページ先へ移動 of 436
T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................. 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ............................. 1 1 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ..........
.
INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 ▫ Roll Over W arning ..................... 5 䡵 How T o Use This Manual .................. 6 䡵 W arnings And Cautions ................... 8 䡵 V ehicle Identification Number ..
INTRODUCTION This manual has been prepar ed with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a W arranty Information Booklet and various customer oriented documents.
Roll Over W arning Utility vehicles have a significantly higher roll over rate than other types of vehicles. This vehicle has a higher ground clearance, higher center of gravity , and narrower track than many passenger cars. It is capable of perform- ing better in a wide variety of off-r oad applications.
million annually . In a roll over crash an unbelted person is significantly more likely to die than a person wearing a seat belt. Always buckle up. HOW TO USE THIS MANUAL Consult the table of contents to determine which section contains the information you desire.
INTRODUCTION 7 1.
W ARNINGS AND CAUTIONS This manual contains W ARNINGS against operating procedur es which could result in an accident or bodily injury . It also contains CAUTIONS against procedures which could result in damage to your vehicle. If you do not read this entir e manual you may miss important information.
VEHICLE MODIFICA TIONS / AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
.
THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W ord About Y our Keys .................. 1 4 ▫ Ignition Key Removal ................... 1 4 ▫ Key-In-Ignition Reminder ................ 1 6 䡵 Steering Wheel Lock — If Equipped .....
▫ Programming Additional T ransmitters ........ 2 4 ▫ Battery Replacement .................... 2 4 ▫ General Information .................... 2 5 䡵 Remote Starting System — If Equipped ........ 2 6 䡵 Door Locks ............................
䡵 Engine Break-In Recommendations ........... 7 4 䡵 Safety T ips ............................ 7 4 ▫ Exhaust Gas .......................... 7 4 ▫ Safety Checks Y ou Should Make Inside The V e h i c l e .............................. 7 5 ▫ Safety Checks Y ou Should Make Outside The V e h i c l e .
A WORD ABOUT YOUR KEYS The keys for your new vehicle are enclosed in a plastic bag with the key code number on it. If you received your keys without the bag, ask your dealer to give you the number . The key code can also be obtained by the dealer from your vehicle invoice.
Automatic T ransmission — If Equipped Place the shift lever in P (Park). T urn the ignition switch to the ACC position, push the key and cylinder inward, rotate the key to the LOCK position, and r emove the key . W ARNING! Leaving children in a vehicle unattended is danger- ous for a number of reasons.
Key-In-Ignition Reminder Opening the driver’s door when the key is in the ignition, sounds a signal to remind you to r emove the key . STEERING WHEEL LOCK — IF EQUIPPED Y our vehicle may be equipped with a passive steering wheel lock (manual transmission only).
the vehicle. The system will shut the engine off in two (2) seconds if someone uses an invalid key to start the engine. NOTE: A key that has not been programmed is consid- ered an invalid key even if it is cut to fit the ignition lock cylinder for that vehicle.
NOTE: When having the Sentry Key System serviced, bring all vehicle keys to the dealer . Customer Key Programming Y ou can program new keys to the system if you have two valid keys by doing the following: 1. Cut the additional Sentry Key T ransponder blank(s) to match the ignition switch lock cylinder key code.
General Information The Sentry Key system complies with FCC rules part 15 and with RSS-210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference that may be received, including interfer ence that may cause undes- ired operation.
T o Disarm the System T o disarm the system, use the remote keyless entry transmitter . Also, using a valid sentry key and moving the ignition switch to the ON/ST AR T position will disarm the system. If something has triggered the system in your absence, the horn will sound three times when you unlock the doors.
The lights also will fade to off if you turn on the ignition after you close all the doors. REMOTE KEYLESS ENTR Y NOTE: For the remote starting featur e (if equipped), refer to the “Remote Starting System” section. NOTE: Y our vehicle’s keyfob may have three, or four buttons, depending on the optional features pur chased with your vehicle.
On electronic vehicle information center (EVIC) equipped vehicles refer to “Remote Unlock Driver’s Door 1st” under “Personal Settings” in the EVIC section (Sec- tion 4) of this manual. On non EVIC – equipped vehicles perform the following steps: 1.
1. Perform this operation while standing outside the vehicle. 2. Pr ess and hold the “Lock” button on a programmed (i.e. functional) key fob. 3. Continue to hold the “Lock” button, wait at least 4 seconds, but no longer than 10 seconds, then press and hold the P ANIC button.
horn. In case one should go off in the futur e, you will need to know which mode has been activated in order to deactivate it. T o activate the Panic mode while the ignition is OFF , press and r elease the P ANIC button on the transmitter once.
1. If the key fob is equipped with a scr ew , remove the screw . W ith the transmitter buttons facing down, use a flat blade to pry the two halves of the transmitter apart. Make sure not to damage the seal during r emoval. 2. Remove and r eplace the batteries.
NOTE: Changes or modifications not expressly ap- proved by the party r esponsible for compliance could void the user’s authority to operate the equipment. If your Keyless Entry T ransmitter fails to operate from a normal distance, check for these two conditions.
Once the vehicle has started, the engine will run for 15 minutes. T o cancel remote start, pr ess the “Remote Start” button once. T o enter the vehicle while the engine is running during a remote start, you must first unlock the vehicle using the “Unlock” button on the key fob.
three single chimes will occur (One chime for each complete display cycle (three cycles total). After this, the display will continue to cycle only (no chimes). If the trip/reset button is pr essed while the VF warnings are being displayed, the VF display will r evert back to only displaying the odometer/trip odometer mileage.
W ARNING! • For personal security and safety in the event of an accident, lock the vehicle doors when you drive as well as when you park and leave the vehicle. • When leaving the vehicle always remove the key from the ignition lock, and lock your vehicle.
locks will not operate. This prevents you fr om acciden- tally locking your keys in the vehicle. Removing the key or closing the door will allow the locks to operate. A chime will sound if the key is in the ignition switch and a door is open, as a reminder to r emove the key .
W ARNING! A void trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child protection locks are engaged. NOTE: For emergency exit with the system engaged, move the lock plunger up (unlocked position), roll down window and open the door with the outside door handle.
Power Off to Accessories Until Exit” in Section 4 of this manual. Opening a vehicle front door will cancel this feature. W ARNING! Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the win- dows while operating the power window switches.
Auto Up Feature with Anti-Pinch Protection (Driver’s and Front Passenger Door Only) Lift the window switch to the second detent, release, and the window will go up automatically . T o stop the window from going all the way up during the auto-up operation, push down on the switch briefly .
W indow Lockout Switch The window lockout switch on the driver’s door (below the power window switches) allows you to disable the window control on the other doors. T o disable the window controls on the other doors, pr ess the window lockout button.
Wind Buffeting W ind buffeting can be described as the perception of pressur e on the ears or a helicopter type sound in the ears. Y our vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) in certain open or partially open positions.
T o open the liftgate, pull up (squeeze) on the handle and lift. Manually unlocking the vehicle doors with the plunger or a key in the lock cylinder will not unlock the liftgate. W ARNING! Driving with the liftgate open can allow poisonous exhaust gases into your vehicle.
NOTE: The front airbags have a multi stage inflator design. This allows the airbag to have differ ent rates of inflation that are based on collision severity . Please pay close attention to the information in this section. It tells you how to use your restraint system properly to keep you and your passengers as safe as possible.
Lap/Shoulder Belts All seating positions in your vehicle have combination lap/shoulder belts. The belt webbing retractor is de- signed to lock during very sudden stops or collisions. This feature allows the shoulder part of the belt to move freely with you under normal conditions.
Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door . Sit back and adjust the seat. 2. The seat belt latch plate is above the back of your seat. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to make the belt go around your lap.
3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” W ARNING! A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries.
4. Position the lap belt acr oss your thighs, below your abdomen. T o remove slack in the lap portion, pull up a bit on the shoulder belt. T o loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision.
6. T o release the belt, push the r ed button marked PRESS on the buckle. The belt will automatically retract to its stowed position. If necessary , slide the latch plate down the webbing to allow it to retract fully . W ARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection.
As a guide, if you are shorter than average, you will prefer a lower position, and if you ar e taller than average, you’ll prefer a higher position. When you r elease the anchorage, try to move it up or down to make sure that it is locked in position.
W ARNING! • The belt and retractor assembly must be replaced if the seat belt assembly “automatic locking re- tractor” feature or any other seat belt function is not working properly when checked according to the procedures in the Service Manual.
seconds or until the driver seat belt is buckled. The Enhanced W arning System (BeltAlert) will be reactivated if the driver seat belt is unbuckled for more than 10 seconds and the vehicle speed is greater than 5 mph (8 km/h).
Pregnant women should wear the lap part of the belt across the thighs and as snug acr oss the hips as possible. Keep the belt low so that it does not come across the abdomen. That way the strong bones of the hips will take the force if ther e is a collision.
Driver And Front Passenger Supplemental Restraint Systems (SRS) This vehicle has airbags for both the driver and right front passenger as a supplement to the seat belt r estraint systems. The driver’s front airbag is mounted in the steering wheel. The passenger side airbag is mounted in the instrument panel, above the glove compartment.
This vehicle is equipped with window bags to protect the driver , front, and r ear passengers sitting next to a win- dow . They are located above the side windows. Their covers are also labeled SRS/AIRBAG. NOTE: Airbag covers may not be obvious in the interior trim; but they will open to allow airbag deployment.
The front airbags have a multi stage inflator design. This allows the airbag to have differ ent rates of inflation that are based on collision severity . Along with the seat belts, front airbags work with the instr ument panel knee bol- sters to provide impr oved protection for the driver and front passenger .
children who do not use child r estraints or belt- positioning booster seats should ride properly buckled up in the rear seat. Never allow childr en to slide the shoulder belt behind them or under their arm.
W ARNING! • Relying on the airbags alone could lead to more severe injuries in a collision. The airbags work with your seat belt to restrain you properly . In some collisions the airbags won’t deploy at all. Always wear your seat belts even though you have airbags.
• Driver and Front Passenger Seat Belt Pr etensioner • Occupant Classification System (OCS) — Front Pas- senger Seat Only − Occupant Classification Module − Passenger Airbag Disable (P AD) I.
either momentarily or continuously . A single chime will sound if the light comes on again after initial start up. W ARNING! Ignoring the “Airbag W arning Light” in your instru- ment panel could mean you won’t have the airbags to protect you in a collision.
objects are placed on the seat, the passenger airbag will not inflate even though the “P AD Indicator Light” is not illuminated. The “P AD Indicator Light” should not be illuminated when a adult passenger is properly seated in the fr ont passenger seat.
Front Passenger Seat Occupant Passenger Air- bag Disable (P AD) Indicator Light Airbag Status Adult OFF ON Grocery Bags, Heavy Briefcases and Other Rela- tively Light Ob- jects ON OFF Empty or V ery Small Objects OFF* OFF * Since the system senses weight, some small objects will turn the P AD Indicator Light on.
because this can also affect occupant classification. Also, if you fold down the rear seat check to be sur e it doesn’t touch the front passenger seat. If the front passenger seat is damaged in any way , it should only be serviced by an authorized dealer .
The driver front airbag gas is vented thr ough the vent holes in the sides of the airbag. The passenger front airbag gas is vented through the vent holes in the sides of the airbag. In this way , the airbags do not interfere with your control of the vehicle.
The front passenger seat assembly contains critical com- ponents that affect the fr ont passenger airbag deploy- ment. Correctly functioning fr ont passenger seat compo- nents are critical for the Occupant Classification System (OCS) to properly classify the fr ont passenger and calcu- late the proper airbag deployment.
W ARNING! Unapproved modifications or service procedures to the front passenger seat assembly , its related compo- nents, or seat cover may inadvertently change the airbag deployment in case of a frontal crash. This could result in death or serious injury to the front seat passenger if the vehicle is involved in an acci- dent.
• As the airbags deflate you may see some smoke-like particles. The particles are a normal by-pr oduct of the process that generates the nontoxic gas used for airbag inflation. These airborne particles may irritate the skin, eyes, nose, or throat. If you have skin or eye irritation, rinse the area with cool water .
Maintaining Y our Airbag System W ARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. Y ou could be injured if the airbag system is not there to protect you.
data during and/or after air bag deployment or near- deployment. EDR data are ONL Y recor ded if an airbag deploys, or nearly deploys, and are otherwise unavail- able.
nature, such as would identify a particular driver , ve- hicle, or crash, will be treated confidentially . Confidential data will not be disclosed by DaimlerChrysler Corpora- tion to any third party except when: 1.
Child Restraint Everyone in your vehicle needs to be buckled up all the time — babies and children, too. Every state in the United States and all Canadian provinces r equire that small children ride in pr oper restraint systems. This is the law , and you can be prosecuted for ignoring it.
Infants and Child Restraints • Safety experts recommend that childr en ride rearwar d-facing in the vehicle until they are at least one year old and weigh at least 20 lbs (9 kg). T wo types of child restraints can be used r earward-facing: infant carriers and “convertible” child seats.
Here ar e some tips for getting the most out of your child restraint: • Before buying any r estraint system, make sure that it has a label certifying that it meets all applicable Safety Standards. The manufactur er also recommends that you try a child restraint in the vehicle seats wher e you will use it before you buy it.
• In the rear seat, you may have tr ouble tightening the lap/shoulder belt on the child restraint because the buckle or latch plate is too close to the belt path opening on the restraint. Disconnect the latch plate from the buckle and twist the short buckle-end belt several times to shorten it.
The belt-positioning booster seat is for children weighing more than 40 lbs (18 kg), but who ar e still too small to fit the vehicle’s seat belts properly . If the child cannot sit with knees bent over the vehicle’s seat cushion while the child’s back is against the seat back, they should use a belt-positioning booster seat.
having attachments for those anchorages will continue to also have features for installation using the vehicle’s seat belts. Child restraints having tether straps and hooks for connection to the top tether anchorages have been avail- able for some time.
install the child restraint. Y ou will easily feel them if you run your finger along the intersection of the seatback and seat cushion surfaces. In addition, there ar e tether strap anchorages behind each rear seating position located on the back of the seat.
Many , but not all restraint systems will be equipped with separate straps on each side, with each having a hook or connector for attachment to the lower anchorage and a means of adjusting the tension in the strap.
Installing Child Restraints Using the V ehicle Seat Belt The passenger seat belts are equipped with either cinch- ing latch plates or automatic locking retractors, which ar e designed to keep the lap portion tight around the child restraint so that it is not necessary to use a locking clip.
Route the tether strap over the seat back and attach the hook to the tether anchor located on the back of the seat. For the outboard seating positions, r oute the tether over the head rests, and attach the hook to the tether anchor located on the back of the seat.
ENGINE BREAK-IN RECOMMENDA TIONS A long break-in period is not r equired for the engine in your new vehicle. Drive moderately during the first 300 miles (500 km). After the initial 60 miles (100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desirable.
garage, and never sit in a parked vehicle with the engine running for a extended period. If the vehicle is stopped in an open area with engine r unning for more than a short period, adjust the ventilation system to force fr esh, outside air into the vehicle.
Defrosters Check operation by selecting the defrost mode and place the blower control on high speed. Y ou should feel the air directed against the windshield. Safety Checks Y ou Should Make Outside The V ehicle T ires Examine tires for excessive tr ead wear or uneven wear patterns.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 M i r r o r s ............................... 8 1 ▫ Inside Day/Night Mirror ................. 8 1 ▫ Automatic Dimming Mirror — If Equipped .... 8 2 ▫ Outside Mirrors ...................
▫ 6–W ay Driver’s Power Seat W ith Manual R e c l i n e r ............................ 1 1 2 ▫ Fold Flat Front Passenger Seat ............ 1 1 3 ▫ Head Restraints ...................... 1 1 3 ▫ Heated Seats — If Equipped ............. 1 1 3 ▫ 60/40 Split Folding Rear Seat W ith Fold Flat Feature .
▫ T o Set At A Desir ed Speed ............... 1 2 6 ▫ T o Deactivate ........................ 1 2 6 ▫ T o Resume Speed ..................... 1 2 6 ▫ T o V ary The Speed Setting ............... 1 2 6 ▫ Manual T ransmission .................. 1 2 7 ▫ T o Accelerate For Passing .
▫ Sunshade Operation ................... 1 4 3 ▫ W ind Buffeting ....................... 1 4 3 ▫ Sunroof Maintenance ................... 1 4 4 䡵 Electrical Power Outlet ................... 1 4 4 ▫ Electrical Outlet Use W ith Engine Off .....
MIRRORS Inside Day/Night Mirror The mirror should be adjusted to center on the view through the r ear window . A two-point pivot system allows for horizontal and vertical adjustment of the mirror . Annoying headlight glare can be r educed by moving the small control under the mirr or to the night position (toward r ear of truck).
Automatic Dimming Mirror — If Equipped This mirror will automatically adjust for annoying head- light glare fr om vehicles behind you. Y ou can turn the feature on or of f by pressing the button at the base of the mirror . A light in the button will indicate when the dimming feature is activated.
W ARNING! V ehicles and other objects seen in the right side convex mirror will look smaller and farther away than they really are. Relying too much on your right side mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in the right side mirror .
Illuminated V anity Mirrors — If Equipped An illuminated vanity mirror is on each sun visor . T o use the mirror , rotate the sun visor down and swing the mirror cover upwar d. The lights will turn on automati- cally . Closing the mirror cover will turn off the light.
NOTE: The UConnect™ system use requir es a cellular phone equipped with the Bluetooth ⬙ Hands-Free Pr ofile, ⬙ version 0.96 or higher . See www .
The rearview mirr or contains the microphone for the system and the radio has the two control buttons that will enable you to access the system. Actual button location may vary with radio. The individual buttons are de- scribed in the “Operations” section.
Operations V oice commands can be used to operate the UConnect™ system and to navigate through the UConnect™ menu structur e. V oice commands are r equired after most UConnect™ system prompts. Y ou will be prompted for a specific command and then guided through the available options.
Cancel Command At any prompt, after the beep, you can say ⬙ Cancel ⬙ and you will be returned to the main menu. However , in a few instances the system will take you back to the previous menu.
• Y ou will then be asked to give your cellular phone a priority level between 1 and 7, 1 being the highest priority . Y ou can pair up to seven cellular phones to your UConnect™ system. However , at any given time, only one cellular phone can be in use, connected to your UConnect™ System.
• System will prompt you to say the name of the person you want call. • After the ⬙ Ready ⬙ prompt and the following beep, say the name of the person you want to call. For example, you can say ⬙ John Doe, ⬙ where John Doe is a pr evi- ously stored name entry in the UConnect™ phone book.
The UConnect™ system will allow you to enter up to 32 names in the phone book with each name having up to four associated phone numbers and designations.
• After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Phonebook Delete. ⬙ • After you enter the Phonebook Delete menu, you will then be asked for the name of the entry that you wish to delete.
• The UConnect™ system will play the names of all the phone book entries. • T o call one of the names in the list, press the ⬙ V oice Recognition’ button during the playing of the desired name, and say ⬙ Call. ⬙ NOTE: The user can also exercise ⬙ Edit ⬙ or ⬙ Delete ⬙ operations at this point.
NOTE: The UConnect™ system compatible phones in market today do not support rejecting an incoming call when another call is in progr ess. Therefor e, the user can only either answer an incoming call or ignore it.
established, press and hold the ’Phone’ button until you hear a double beep indicating that the two calls have been joined into one conference call.
• An active call is automatically transferred to the mobile phone after ignition key is switched to off. UConnect™ System Features Language Selection T o change the language that the UConnect™ system is using, • Press the ’Phone’ button to begin.
NOTE: The emergency number dialed is based on the Country where the vehicle is pur chased (91 1 for USA and Canada and 060 for Mexico). The number dialed may not be applicable with the available cellular service and area.
W orking with Automated Systems This method is designed to be used in instances where one generally has to press numbers on the cellular phone keypad while navigating through an automated tele- phone system.
• After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Setup Confirmations. ⬙ The UConnect™ system will play the current confirmation pr ompt status and you will be given the choice to change it.
In order to un-mute the UConnect™ system: • Press the ’V oice Recognition’ button. • Following the beep, say ⬙ Mute-off. ⬙ Information Service When using A T&T W ireless Service, dialing to phone number ⬙ #121, ⬙ you can access voice activated automated system to receive news, weather , stocks, traffic, etc.
• The UConnect™ system will play the phone names of all paired cellular phones in or der from the highest to the lowest priority . T o “select” or “delete” a paired phone being announced, press the ⬘ V oice Recognition’ button and say “Select” or “Delete.
• Y ou can also press the ⬘ V oice Recognition’ button anytime while the list is being played and then choose the phone you wish to delete. Things Y ou Should Know About Y our UConnect™ System.
• Make sure that no one other than you is speaking during a voice recognition period. • Performance is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry weather condition.
• low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, and • dry weather condition. • operation from driver seat. • Performance, such as audio clarity , echo, and loudness to a large degr ee rely on the phone and network, and not the UConnect™ system.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 105 3.
106 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 107 3.
V oice Commands Primary Alternate(s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all call cancel confirmation prompts continue delete dial edit emergency.
mobile mute mute off new entry no pager pair a phone phone pairing pairing phonebook phone book previous recor d again redial return to main menu return or main menu select phone select send set up ph.
SEA TS Front Manual Seat Adjustment Move the seat forward or r earward using the adjustment bar . Lift up on the bar located on the front of the seat near the floor . Position the seat and be sure the latch engages fully . Using body pressur e, move forward and r earward on the seat to be sure the seat adjusters have latched.
Front Seat Adjustment — Recline T o adjust the seatback, lift the lever located on the outboard side of the seat, lean back, and r elease the lever at the desired position. T o return the seatback, lift the lever , lean forward, and r elease the lever .
6–W ay Driver’s Power Seat with Manual Recliner The seat switch is on the outboard side of the seat near the floor . Use this switch to move the seat up or down, forward or r earward, or to tilt the seat. This seat also has a manual recline lever located just to the rear of the power seat switch.
Fold Flat Front Passenger Seat The front passenger seat can be folded flat to allow for extended cargo space. Pull up on the lever to fold down the seat back. Head Restraints Head restraints can r educe the risk of whiplash injury in the event of impact from the r ear .
indicate the level of heat in use. T wo LEDs are illumi- nated for high, one for low , and none for off. Pr essing the switch once will select high-level heating. Pressing the switch a second time will select low-level heating. Pressing the switch a thir d time will shut the heating elements off.
W ARNING! Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury , medication, alcohol use, exhaus- tion or other physical condition must exercise care when using the seat heater . It may cause burns even at low temperatures, especially if used for long periods of time.
Also, be sure that the fr ont seats are fully upright and positioned forward. This will allow the r ear seat to fold down easily . W ARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed.
4. If desir ed, push down on the seatback to lock it in the folded position. T o Raise Rear Seat If locked in the folded position, pull the release strap (toward the fr ont of the vehicle).
Then push the safety latch lever to the left. It is located between the grille and hood opening right of the center . T o prevent possible damage, do not slam the hood to close it. Use a firm downward push at the center fr ont edge of the hood to ensure that both latches engage.
LIGHTS Interior Lights The overhead light comes on when a door is opened. It may also be turned on by rotating the contr ol for the dimmer switch on the multi-function control lever fully upward. The overhead light will automatically turn of f in about 20 minutes if a door is left open or the dimmer control is left in the dome light position.
Parking Lights, Instrument Panel Lights, and Headlights T urn the end of the multi-function control lever to the first detent for parking lights and instrument panel lights.
Passing Light Y ou can signal another vehicle with your headlights by lightly pulling the multi-function control lever towar d the steering wheel. This will cause the headlights to turn on at high beam and remain on until the lever is r eleased. Front Fog Lights — If Equipped The front fog light switch is in the multi-function control lever .
Daytime Running Lights — If Equipped The headlights come on at a low intensity level after the vehicle has been driven approximately 3 feet (1 meter).
Windshield Wiper Operation Move the lever upward to the second detent for LO speed wiper operation, or to the third detent for HI speed operation Windshield W ashers T o use the washer , pull the lever toward you and hold while spray is desired.
TIL T STEERING COLUMN T o tilt the column, push down on the lever under the multi-function control lever and move the wheel up or down, as desired. Pull the lever back upwar ds to lock the column firmly in place. W ARNING! T ilting the steering column while the vehicle is moving is dangerous.
ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, this device takes over the accelerator operation at speeds greater than 25 mph (40 km/h). The speed control lever is located on the right side of the steering wheel. T o Activate Push the ON/OFF button.
T o Set At A Desired Speed When the vehicle has reached the desir ed speed, press down on the lever and release. Release the accelerator and the vehicle will operate at the selected speed. NOTE: The vehicle should be traveling at a steady speed and on level ground befor e pressing the SET lever .
T apping the “SET DECEL” button once will result in a 1 mph (2 km/h) speed decrease. Each time the button is tapped, speed decreases. NOTE: The Speed Control system has been designed to shut down if multiple speed control switch functions ar e operated simultaneously in order to ensur e proper op- eration.
On steep hills a greater speed loss or gain may occur so it may be preferable to drive without speed contr ol. ELECTRONIC BRAKE CONTROL SYSTEM Y our vehicle is equipped with an advanced electronic bra.
TCS (T raction Control System) This system monitors the amount of wheel spin of each of the driven wheels. If wheel spin is detected, brake pressur e is applied to the slipping wheel(s) and engine power is reduced to pr ovide enhanced acceleration and stability .
W ARNING! BAS (Brake Assist System) cannot prevent the natu- ral laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. BAS cannot prevent accidents, in- cluding those resulting from excessive speed in turns, driving on very slippery surfaces, or hydro- planing.
W ARNING! Many factors, such as vehicle loading, road condi- tions and driving conditions, influence the chance that wheel lift or rollover may occur . ERM can not prevent all wheel lift or rollovers, especially those that involve leaving the roadway or striking objects or other vehicles.
ESP/TCS Indicator Light The ⬙ ESP/TCS Indicator Light ⬙ located in the instrument cluster , starts to flash as soon as the tires lose traction and the ESP system becomes active.
ESP On This is the normal operating mode for ESP in 2WD, 4WD Part T ime, 4WD Full T ime, and on 2WD vehicles. When- ever the vehicle is started, the ESP system will be in this mode. This mode should be used for most all driving situations. ESP should only be turned of f for specific reasons as noted below .
situation requiring ESP to be switched to the “Partial Off” mode is overcome, turn ESP back on by momentarily depressing the “ESP OFF” switch. This may be done while the vehicle is in motion. ESP/BAS W arning Lamp The malfunction indicator lamp for the ESP is combined with BAS.
The HomeLink 威 Universal T ransceiver replaces up to three r emote controls (hand held transmitters) that oper - ate devices such as garage door openers, motorized gates, or home lighting.
Programming The Universal T ransceiver For best results, install a new battery in the hand held transmitter before pr ogramming. If your garage door opener (located in the garage) is equipped with an antenna, make sure that the antenna is hanging straight down.
1. T urn off the engine. 2. Erase the factory test codes by pr essing the two outside buttons. Release the buttons when the light in the Universal T ransceiver begins to flash (about 20 seconds). NOTE: Do not repeat Step 2 to pr ogram additional hand held transmitters.
5. The indicator light in the Universal T ransceiver will begin to flash, first slowly and then rapidly . The rapid flashing indicates successful programming. If after 90 seconds the indicator light does not flash rapidly or goes out, return to step 1 and r epeat the procedur e.
NOTE: The assistance of a second person may make the following programming pr ocedure quicker and easier . 1. Locate the training button on the garage door motor head unit. The exact location and color of the button may vary by garage door opener manufacturer .
The Universal T ransceiver light will flash slowly and then rapidly when the programming is successful. NOTE: When programming such a garage door opener or gate, unplug the device to prevent possible damage to the garage door or gate motor .
2. This device must accept any interfer ence that may be received including interfer ence that may cause undesired operation. NOTE: Changes or modifications not expressly ap- proved by the party r esponsible for compliance could void the user’s authority to operate the equipment.
W ARNING! • Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death.
sunroof will automatically r etract. Remove the obstruc- tion if this occurs. Next, press the switch forwar d and release to Expr ess Close. Pinch Protect Override If a known obstruction (ice, debris, etc.) pr events closing, press the switch forwar d and hold.
Sunroof Maintenance Use only a non-abrasive cleaner and a soft cloth to clean the glass panel. ELECTRICAL POWER OUTLET This vehicle has two auxiliary power outlets that can provide up to 20 Amps of current for accessories de- signed for use with the standard power outlet adapters.
The rear power outlet (if equipped) is located in the left rear car go area. Electrical Outlet Use With Engine Off W ARNING! • Many accessories that can be plugged in draw power from the vehicle’s battery , even when not in use (i.e. cellular phones, etc.
POWER INVERTER There is a 1 10–volt, 150–watt inverter outlet located on the back of the center console to convert DC current to AC current. This outlet can be used to power small appliances and electronics. Press the switch located in the center stack lower switch bank to turn the power on to the outlet.
W ARNING! T o A void Serious Injury or Death: • Do not use a 3—Prong Adaptor . • Do not insert any objects into the receptacles. • Do not touch with wet hands. • Close the lid when not in use. • If this outlet is mishandled it may cause an electric shock and failure.
The rear passengers have cup holders at the r ear of the center console. STORAGE Front Storage Compartment The front storage compartment (located on the left side of the instrument panel) can hold cell phones, PDA’s, and other small items.
Console Storage Compartment T o open, press the latch and lift cover . The center console has a removable storage tray which can hold cell phones, PDA’s, and other small items.
CARGO AREA FEA TURES Cargo Light The cargo ar ea light is activated by opening the liftgate, opening any door , or by rotating the dimmer contr ol on the multi-function control lever to the extr eme top posi- tion. Cargo Tie-Down Hooks The tie-downs located on cargo ar ea floor should be used to safely secure loads when vehicle is moving.
• Do not pile luggage or cargo higher than the top of the seatback. This could impair visibility or become a dangerous pr ojectile in a sudden stop or collision. W ARNING! T o help protect against personal injury , passengers should not be seated in the rear cargo area.
2. Lift cover . 3. Flip cover over , and lock panel back into position. Utility T able — If Equipped The cargo load floor can be converted into a utility table.
1. Push side mounted r elease handles (toward center of vehicle) to release cover . 2. Lift the cover and r emove from vehicle. 3. Flip the cover over , and remove table legs from their retainers. 4. Insert the legs into their corner positions. 5. Set the table on level gr ound.
1. Open the tailgate. 2. Squeeze the right hand r elease handle. 3. Pull out the sliding panel. 4. Squeeze the right hand r elease handle to slide the panel back into the vehicle.
REAR WINDOW FEA TURES Rear Window Wiper/W asher — If Equipped A rotary ring switch on the control lever (located on the right side of the steering column), controls operation of the rear wiper/washer function. Rotating the center of the switch up to the “On” position will activate the wiper .
If the swing gate flip-up window is open or the swing gate is open, connection to the rear window wiper is interrupted pr eventing activation of the rear wiper blade. When the swing gate flip-up window or the swing gate is closed, the rear wiper switch or the ignition switch needs to be turned OFF , and then to ON to restart the r ear wiper .
CAUTION! Use care when washing the inside of the rear win- dow to prevent damage to heating elements. Use a soft cloth and a mild washing solution, wiping parallel to the heating elements. Also, keep all objects a safe distance from the window to prevent damaging the heating elements.
CAUTION! T o avoid damage to the roof rack and vehicle, do not exceed the maximum roof rack load capacity . Always distribute heavy loads as evenly as possible and secure the load appropriately . Long loads which extend over the windshield, such as wood panels or surfboards, should be secured to both the front and rear of the vehicle.
INSTRUMENT P ANEL AND CONTROLS CONTENTS 䡵 Instrument Panel And Controls ............. 1 6 2 䡵 Instrument Cluster ...................... 1 6 3 䡵 Instrument Cluster Description ............. 1 6 4 䡵 Compass And T rip Computer — If Equipped . .
▫ Electrical Disturbances .................. 1 9 1 ▫ AM Reception ....................... 1 9 1 ▫ FM Reception ........................ 1 9 1 䡵 Sales Code REQ — AM/FM Stereo Radio And 6–Disc CD/DVD Changer (MP3/WMA Aux Jack) ..............
▫ Electronic Serial Number/Sirius Identification Number (ENS/SID) .................... 2 2 1 ▫ Selecting Satellite Mode (RSC Radios) ....... 2 2 2 ▫ Satellite Antenna ...................... 2 2 2 ▫ Reception Quality ..................... 2 2 2 ▫ Operating Instructions - Satellite Mode .
INSTRUMENT P ANEL AND CONTROLS 162 INSTRUMENT P ANEL AND CONTROLS.
INSTRUMENT CLUSTER INSTRUMENT P ANEL AND CONTROLS 163 4.
INSTRUMENT CLUSTER DESCRIPTION 1. Fuel Gauge The fuel gauge shows level of fuel in tank when ignition switch is in the ON position. 2. Fuel Cap Indicator This symbol indicates the side of the vehicle where the fuel cap is located. 3. T emperature Gauge The temperature gauge indicates engine coolant temperature.
5. Seat Belt Reminder Light This light comes on for several seconds after the ignition is turned ON as a reminder to “buckle up.” This light will remain on as long as the seat belt remains unbuckled. If this light flashes, it indicates a fault in the airbag system.
W ARNING! A hot engine cooling system is dangerous. Y ou or others could be badly burned by steam or boiling coolant. Y ou may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, see Section 7 of this manual.
after several ignition cycles, and the vehicle has been driven several miles at speeds greater than 30 mph (48 km/h), see your authorized dealer as soon as possible. NOTE: The ⬙ ESP/TCS Indicator Light ⬙ and the ⬙ ESP/ BAS W arning Lamp ⬙ come on momentarily each time the ignition switch is turned ON.
bulb check. If the bulb does not come on during starting, see your authorized dealer for service. If the light stays on, it may be an indication that the parking brake has not been released, or ther e is a low brake fluid level.
16. Electr onic Stability Program (ESP) Indicator Light/T raction Control System (TCS) Indicator Light The yellow ESP indicator light in the speedom- eter area illuminates with the key in the igni- tion switch turned to the ON/RUN position. It should go out with the engine running.
approximately 3 seconds. If this light r emains on or comes on during driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that service is requir ed. See your authorized dealer immedi- ately . W ith the ABS malfunctioning, the BAS and ESP are also switched off.
24. T ransmission Range Indicator The electronic gear selector display is self-contained within the instrument cluster . It displays the position of the automatic transmission shift lever , and the relation of each position to all other positions. For a good signal the display will place a box around the selected transmission range (PRND21).
maintain correct tir e pressur e, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pr essure telltale. The “T ire Pressur e Monitoring T elltale Light” will illumi- nate in the instrument cluster , and an audible chime will be activated when one or more tir e pressur es is low .
press the Odometer/T rip Odometer Button. T o reset the T rip Odometer , press and hold the button while in trip mode, until the T rip Odometer resets. If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, GASCAP will be displayed in the instr ument cluster .
CAUTION! Prolonged driving with the MIL on could cause damage to the engine control system. It also could affect fuel economy and driveability . If the MIL is flashing, severe catalytic converter damage and power loss will soon occur . Immediate service is required.
COMP ASS AND TRIP COMPUTER — IF EQUIPPED The Compass/T rip Computer features a driver - interactive display (displays information on outside tem- perature, compass dir ection, and trip information). It is located on the lower left part of the cluster below the fuel and engine temperature gauge, and the tachometer .
• Loose Fuel Cap (gASCAP) These messages can be manually turned off by pr essing the right button (on the instrument cluster). Control Buttons Press and r elease the odometer/trip odometer reset but- ton (right side of the instrument cluster) to access the compass/trip computer displays.
T rip Conditions T rip Odometer (ODO) This display shows the distance traveled since the last reset. Pr ess and release the right button (on the instru- ment cluster) to switch from odometer , to trip A or trip B. Press and hold the right button while the odometer/trip odometer is displayed to reset.
NOTE: Magnetic materials should be kept away from the top of the right rear quarter window . This is where the compass sensor is located. T o Set the V ariance Start the engine, and leave the transmission in the P (Park) position.
T o Manually Calibrate the Compass Start the engine, and leave the transmission in the P (Park) position. Press and hold (appr oximately 10 sec- onds) the odometer/trip odometer reset button until the current variance zone number is displayed.
V ehicles equipped with steering wheel mounted buttons (described in this section) are also equipped with the EVIC. The EVIC consists of the following: • System Status • V ehicle information warni.
Press and r elease the COMP ASS/ TEMPERA TURE button to display one of eight compass readings and the outside temperatur e. Electronic V ehicle Information Center (EVIC) Displays When the appropriate .
• Right Front Low Pr essure (with a single chime). Refer to “T ire Pressur e Monitoring System” in Section 5 of this manual. • Right Rear Low Pressur e (with a single chime). Refer to “T ire Pressur e Monitoring System” in Section 5 of this manual.
and average fuel economy , according to the current fuel tank level. DTE cannot be reset thr ough the FUNCTION SELECT button. NOTE: Significant changes in driving style or vehicle loading will greatly af fect the actual drivable distance of the vehicle, regar dless of the DTE displayed value.
Automatic Compass Calibration This compass is self-calibrating, which eliminates the need to set the compass manually . When the vehicle is new , the compass may appear erratic and the EVIC will display “CAL” until the compass is calibrated.
NOTE: Magnetic materials should be kept away from the top of the right rear quarter window . This is where the compass sensor is located. INSTRUMENT P ANEL AND CONTROLS 185 4.
1. T urn the ignition switch ON. 2. Pr ess and hold the compass button for approximately 2 seconds. 3. Pr ess the SCROLL button until “Compass V ariance” message and the last variance zone number displays in the EVIC. 4. Pr ess and release FUNCTION SELECT button until the proper variance zone is selected accor ding to the map.
The EVIC displays this symbol to indicate an incoming call. The EVIC displays this symbol to indicate that the UConnect™ phone is currently in analog mode. The EVIC displays this symbol to indicate that the UConnect™ phone is currently r oaming. The EVIC displays this symbol to indicate that you have voice mail.
The EVIC displays this symbol to indicate that a phone connection has been made. The EVIC displays this symbol to indicate that the Connect™ phone is currently not available. Personal Settings (Customer Programmable Features) Personal Settings allows the driver to set and recall features when the transmission is in P ARK.
T o make your selection, press and r elease the FUNC- TION SELECT button until “ON” or “OFF” appears. Unlock Doors Automatically on Exit When ON is selected, all doors will unlock when the vehicle is stopped and the transmission is in the P (Park) or N (Neutral) position and the driver’s door is opened.
Delay T urning Headlights Off When this feature is selected, the driver can choose to have the headlights remain on for 0, 30, 60, or 90 seconds when exiting the vehicle. T o make your selection, press and release the FUNCTION SELECT button until “0,” “30,” “60,” or “90” appears.
RADIO GENERAL INFORMA TION Radio Broadcast Signals Y our new radio will provide excellent r eception under most operating conditions. Like any system, however , car radios have performance limitations, due to mobile op- eration and natural phenomena, which might lead you to believe your sound system is malfunctioning.
will remain active for up to 10 minutes after the ignition switch has been turned off. Opening a vehicle fr ont door will cancel this feature. SALES CODE REQ — AM/FM STEREO RADIO AND 6–DISC CD/DVD CHANGER (MP3/WMA AUX JACK) NOTE: The radio sales code is located on the lower right side of your radio faceplate.
Power Switch/V olume Control (Rotary) Press the ON/VOL contr ol to turn the radio ON. Press the ON/VOL a second time to turn OFF the radio. Electronic V olume Control The electronic volume contr ol turns continuously (360 degrees) in either dir ection without stopping.
2. Adjust the hours by turning the right side TUNE control knob. 3. After the hours ar e adjusted, press the right side TUNE control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side TUNE contr ol knob.
Press the r otary TUNE control knob a fifth time and F ADE will display . T urn the TUNE control knob to the left or right to adjust the sound level between the front and rear speakers. Press the r otary TUNE control knob again to exit setting tone, balance and fade.
Rhythm and Blues R & B Religious Music Rel Musc Religious T alk Rel T alk Rock Rock Soft Soft Soft Rock Soft Rck Soft Rhythm and Blues Soft R&B Sports Sports Ta l k Ta l k T op 40 T op 40 W ea.
• DVD Play Options - Selecting the DVD Play Options will display the following: • Subtitle – Repeatedly Pressing SELECT will switch subtitles to differ ent subtitle languages that are available on the disc (If Equipped).
Menu Language — If Equipped Selecting this item will allow the user to choose the default startup DVD menu language (effective only if language supported by disc). If customer wishes to select a language not listed, then scroll down and select ⬙ other ⬙ .
Aspect Ratio — If Equipped Selecting this item will allow the user to choose between wide screen, pan scan, and letter box. AutoPlay — If Equipped When this is set to ON and a DVD video is inserted, it will bypass the DVD menu screen and automatically play the movie.
Every time a preset button is used a corr esponding button number will be displayed. B u t t o n s1-6( Radio Mode) These buttons tune the Radio to the stations that you commit to push-button memory {12 AM, 12 FM, and 12 Satellite (if equipped) stations}.
Radio display will show ⬙ LOADING DISC ⬙ when the disc is loading and “READING DISC” when the radio is reading the disc. CAUTION! • This CD player will accept 4 3/4 inch (12 cm) discs only . The use of other sized discs may damage the CD player mechanism.
R W/FF (CD MODE) Press and hold FF (Fast Forwar d) and the CD player will begin to fast forward until FF is r eleased or R W or another CD button is pressed. The R W (Reverse) button works in a similar manner . AM or FM Button (CD MODE) Switches the Radio to the Radio mode.
• Maximum number of directory levels: 8 • Maximum number of files: 255 • Maximum number of folders: 100 • Maximum number of characters in file/folder names: • Level 1: 12 (including a separator ⬙ . ⬙ and a 3-character extension) • Level 2: 31 (including a separator ⬙ .
MPEG Specifi- cation Sampling Fre- quency (kHz) Bit rate (kbps) MPEG-1 Audio Layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 1 12, 96, 80, 64, 56, 48 MPEG-2 Audio Layer 3 24, 22.05, 16 160, 128, 144, 1 12, 96, 80, 64, 56, 48 WMA Specifica- tion Sampling Fre- quency (kHz) Bit Rate (kbps) WMA 44.
LIST Button (DISC Mode for MP3/WMA Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE control knob.
SCAN Button (Auxiliary Mode) No function. EJECT Button (Auxiliary Mode) No function. PSCAN Button (Auxiliary Mode) No function. TIME Button (Auxiliary Mode) Press this button to change the display fr om elapsed playing time to time of day . The time of day will be displayed for 5 seconds.
Macrovision This product incorporates copyright pr otection technol- ogy that is protected by U.S. patents and other intellec- tual property rights. Use of this copyright pr otection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision.
Power Switch/V olume Control (Rotary) Press the ON/VOLUME contr ol knob to turn the radio on. Press the ON/VOLUME contr ol knob a second time to turn the radio off. Electronic V olume Control The electronic volume contr ol turns continuously (360 degrees) in either dir ection without stopping.
2. Adjust the hours by turning the right side TUNE control knob. 3. After the hours ar e adjusted, press the right side TUNE control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side TUNE contr ol knob.
Press the r otary TUNE control knob a fifth time and F ADE will display . T urn the TUNE control knob to the left or right to adjust the sound level between the front and rear speakers. Press the r otary TUNE control knob again to exit setting tone, balance and fade.
Rhythm and Blues R & B Religious Music Rel Musc Religious T alk Rel T alk Rock Rock Soft Soft Soft Rock Soft Rck Soft Rhythm and Blues Soft R&B Sports Sports Ta l k Ta l k T op 40 T op 40 W ea.
Select the button (1-6) you wish to lock onto this station and press and r elease that button. If a button is not selected within 5 seconds after pressing the SET button, the station will continue to play but will not be stored into push-button memory .
Inserting Compact Disc(s) Gently insert one CD into the CD player with the CD label facing up. The CD will automatically be pulled into the CD Player and the CD icon will illuminate on the radio display . If a CD does not go into the slot more than an inch, a disc may already be loaded and must be ejected before a new disc can be loaded.
If you have ejected a disc and have not removed it within 10 seconds, it will be reloaded. If the CD is not r emoved, the radio will reinsert the CD but will not play it. A disc can be ejected with the radio and ignition OFF . NOTE: Ejecting with ignition OFF is not allowed on convertible or soft-top models (if equipped).
Press the right SEEK button to move to the next ran- domly selected track. Press the RND button a second time to stop Random Play . Notes On Playing MP3 Files The radio can play MP3 files, however , acceptable MP3 file recor ding media and formats are limited.
• Level 2: 31 (including a separator ⬙ . ⬙ and a 3-character extension) Multisession disc formats are supported by the radio. Multisession discs may contain combinations of normal CD audio tracks and computer files (including MP3 files).
Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files.
Press and hold the INFO button again for 3 seconds to return to ⬙ elapsed time ⬙ display . Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the.
SALES CODE RER — AM/FM/CD/DVD RADIO WITH NA VIGA TION SYSTEM — IF EQUIPPED NOTE: The radio sales code is located on the lower right side of your radio faceplate.
either the H button on the faceplate to change the hour or the M button on the faceplate to change the minute. 2. The time setting will incr ease each time you press the button.
SA TELLITE RADIO — IF EQUIPPED Satellite radio uses direct satellite to r eceiver broadcast- ing technology to provide clear digital sound, coast to coast.
Selecting Satellite Mode (RSC Radios) Press the SA T button until ⬙ SA T ⬙ appears in the display . A CD may remain in the radio while in the Satellite radio mode.
SCAN Button Pressing the SCAN button causes the tuner to sear ch for the next channel, pausing for 8 seconds before continuing to the next. T o stop the search, pr ess SCAN a second time. INFO Button Pressing the INFO button will cycle between Artist, Song T itle, and Composer (if available) information.
• Display Sirius ID number — Press the SELECT button to display the Sirius ID number . This number is used to activate, deactivate, or change the Sirius subscrip- tion. SET Button — T o Set the Push-Button Memory When you are r eceiving a channel that you wish to commit to push-button memory , press the SET button.
VIDEO ENTERT AINMENT SYSTEM (SALES CODE XRV) — IF EQUIPPED The optional VES™ (V ideo Entertainment System) con- sists of a DVD player and LCD (liquid crystal display) screen, a battery-power ed remote contr ol, and two head- sets. Refer to your VES™ User’s Manual for detailed operating instructions.
REMOTE SOUND SYSTEM CONTROLS — IF EQUIPPED The remote sound system contr ols are located on the r ear surface of the steering wheel. Reach behind the wheel to access the switches. The right hand control is a r ocker type switch with a push button in the center .
The left hand control is a r ocker type switch with a push button in the center . The function of the left hand control is differ ent depending on which mode you are in.
3. Do not apply paper , paper CD labels, or tape to the disc; avoid scratching the disc. 4. Do not use solvents such as benzine, thinner , cleaners, or antistatic sprays. 5. Stor e the disc in its case after playing. 6. Do not expose the disc to dir ect sunlight.
Blower Control Use this control to r egulate the amount of air forced through the system in any mode you select. The fan speed increases as you turn the outer control ring to the right from the OFF position. T emperature Control Use this control to r egulate the temperature of the air in- side the passenger compart- ment.
Mode Control The mode control allows you to choose from several pat- terns of air distribution. Y ou can select either a primary mode, as identified by the symbols, or a blend of two of these modes. The closer the control is to a particular mode, the more air distribu- tion you receive fr om that mode.
Defrost Air is directed thr ough the windshield and side window demist outlets. Use this mode with maxi- mum fan and temperature (Hot) settings for best wind- shield and side window defrosting. NOTE: The air conditioning compressor operates in both Mix and Defrost or a blend of these modes even if the fan switch is not in the A/C position.
moisture build up inside the vehicle. For maximum defogging, select the Outside Air position. NOTE: Recirculation mode will not operate in floor , mix or defrost modes. Air Conditioning Operation Press the temperatur e control knob to activate the air condi- tioning mode.
smoke, perfumes, etc.) from sticking to the windows. Contaminates increase the rate of window fogging. Summer Operation Air conditioned vehicles must be protected with a high quality antifreeze coolant during summer to pr ovide proper corr osion protection and to raise the boiling point of the coolant for protection against over heating.
.
ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es ..................... 2 3 9 ▫ Manual T ransmission .................. 2 3 9 ▫ Automatic T ransmission ................ 2 3 9 ▫ Normal Starting ...................... 2 3 9 ▫ Extreme Cold W eather (Below –20°F Or –29°C) .
䡵 Four-Wheel Drive Operation ............... 2 5 9 ▫ Mp 143 Single-Speed Part-T ime T ransfer Case — If Equipped ............. 2 5 9 ▫ Shifting Procedur e - Electronically Shifted T ransfer Case ................... 2 6 1 ▫ Mp 140 Single-Speed Full-T ime T ransfer Case — If Equipped .
䡵 T ire Pressur e Monitoring System (TPMS) — If Equipped ........................... 2 8 7 ▫ Base System — If Equipped .............. 2 9 0 ▫ Premium System — If Equipped .......... 2 9 1 ▫ General Information ................... 2 9 5 䡵 Fuel Requirements .
▫ T o w i n g T i p s ......................... 3 1 9 䡵 Recreational T owing (Behind Motorhome, Etc.) ................. 3 2 1 ▫ T owing – 2WD Models ................. 3 2 1 ▫ T owing — 4WD Or All-Wheel Drive Models ........................
ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. CAUTION! Long periods of engine idling, especially at high engine speeds can cause excessive exhaust tempera- tures which can damage your vehicle.
T ip Start Feature — Automatic T ransmission Only Do not press the accelerator . T urn the ignition key briefly to ST AR T position, and release it. The starter motor will continue to run, but will automatically disengage itself when the engine is running.
W ARNING! Never pour fuel or other flammable liquids into the throttle body air inlet opening in an attempt to start the vehicle. This could result in a flash fire causing serious personal injury . W ARNING! Do not attempt to push or tow your vehicle to get it started.
released. If this occurs, continue cranking with the accel- erator pedal pushed all the way to the floor . Release the accelerator pedal and the key once the engine is running smoothly .
ENGINE BLOCK HEA TER — IF EQUIPPED The engine block heater warms engine coolant and permits quicker starts in cold weather . Connect the cord to a standard 1 10-1 15 volt AC electrical outlet with a grounded, thr ee wire extension cor d. W ARNING! Remember to disconnect the cord before driving.
Follow the shift pattern on the gearshift knob. NOTE: The backup lights will come on when your vehicle is in R (Reverse) gear and the ignition is in the ON position. W ARNING! When parking your vehicle, always leave a manual transmission in first gear and apply the parking brake fully to guard against vehicle movement and possible injury or damage.
• Do not operate at sustained high engine or road speeds in lower gears. Engine damage may result. • Do not downshift into a low gear while traveling at too high a speed for that gear . Engine, clutch, or transmis- sion damage may result. • Do not rest your foot on the clutch pedal.
Recommended Manual T ransmission Downshifting Speeds T o prevent clutch and transmission damage, your vehicle should be downshifted at speeds no greater than those listed in the chart below: Manual T .
AUTOMA TIC TRANSMISSION CAUTION! Damage to the transmission may occur if the follow- ing precautions are not observed: • Shift into P (Park) only after the vehicle has come to a complete stop. • Shift into or out of R (Reverse) only after the vehicle has come to a complete stop and the engine is at idle speed.
Shift Lock Manual Override — If Equipped Y our vehicle may be equipped with a shift lock manual override. The manual override may be used in the event that the shift lever should fail to move from Park with the key in the ON position and the brake pedal depressed.
Brake/T ransmission Interlock System This system prevents you fr om moving the gear shift out of P (Park) and into any gear unless the brake pedal is pressed. Always depress the brake pedal first, before moving the gear selector out of P (Park). 4–Speed Automatic T ransmission (3.
P (Park) This gear position supplements the parking brake by locking the transmission. The engine can be started in this range. Never use P (Park) while the vehicle is in motion. Apply the parking brake when leaving the vehicle in this range. Always apply parking brake first, then place the selector in P (Park) position.
R (Reverse) Use this range only after the vehicle has come to a complete stop. N (Neutral) Shift into N (Neutral) when the vehicle is standing for prolonged periods with the engine r unning. The engine may be started in this range. Set the parking brake if you must leave the vehicle.
• the transmission selector is in D (Drive); • the engine coolant has reached normal operating tem- perature; • vehicle speed is above approximately 30 mph (48 km/h); • the “TOW/HAUL” button has not been activated; • transmission has reached normal operating tempera- ture.
operating in “TOW/HAUL” mode, the transmission will shift to 3rd gear and 4th will be enabled under steady cruise conditions. The “TOW/HAUL Indicator Light” will illuminate in the instrument cluster to indicate when the switch has been activated.
T o reset the transmission, use the following pr ocedure: 1. Stop the vehicle. 2. Move the shift lever to the P (Park) position. 3. T urn off the engine, be sur e to turn the key to the LOCK position. 4. W ait approximately 10 seconds, then r estart the en- gine.
Gear Ranges NOTE: After selecting any gear range, wait a moment to allow the selected gear to engage before accelerating. This is especially important when the engine is cold. If there is a need to r estart the engine be sure to cycle the key to the LOCK position before r estarting.
W ARNING! It is dangerous to shift the selector lever out of P (Park) or N (Neutral) if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. Y ou could lose control of the vehicle and hit someone or something.
of the desired top gear . For example, if the driver shifts the transmission into 3 (third gear), the transmission will never shift above third gear , but can shift down to 2 (second) or 1 (first), when needed. W ARNING! Do not downshift for additional engine braking on a slippery surface.
risen to a suitable level. Refer also to the Note under torque converter clutch, later in this section. During cold temperature operation, you may notice delayed upshifts depending on engine and transmission temperature. This featur e improves the warm up time of the engine and transmission.
A clutch within the torque converter engages automati- cally at a calibrated speed at light throttle. It engages at higher speeds under heavier acceleration. This may re- sult in a slightly differ ent feeling or response during normal operation in high gear .
This electronically shifted transfer case pr ovides 2 mode positions: 2 (rear) wheel drive high range (2WD) and 4 wheel drive high range (4WD LOCK). The electronically shifted transfer case is designed to be driven in the 2 wheel drive position (2WD) for normal street and highway conditions (dry har d surfaced roads).
Proper operation of 4 wheel drive vehicles depends on tires of equal size, type and cir cumference on each wheel. Any differ ence in tire size can cause damage to the transfer case. Since 4 wheel drive provides impr oved traction, there is a tendency to exceed safe turning and stopping speeds.
NOTE: Delayed shifting out of 4WD LOCK may be experienced due to uneven tire wear , low tire pr essure, or excessive loading. MP 140 Single-Speed Full-T ime T ransfer Case — If Equipped Operating Information/Precautions The MP 140 is a single speed (HI range only) transfer case which provides convenient full-time all-wheel drive.
P ARKING BRAKE T o set the parking brake, pull the lever up as firmly as possible. When the parking brake is applied with the ignition ON, the “Brake W arning Light” in the instru- ment cluster will light. T o release the parking brake, pull up slightly , press the center button, then lower the lever completely .
Be sure the parking brake is firmly set when parked, and the gear shift lever is in the P (Park) position (automatic transmission) or R (Reverse) or 1st gear (manual trans- mission).
When parking on a hill, turn the front wheels towar d the curb on a downhill grade and away from the curb on an uphill grade. The parking brake should always be applied whenever the driver is not in the vehicle.
W ARNING! Pumping of the Anti-Lock Brakes will diminish their effectiveness and may lead to an accident. Pumping makes the stopping distance longer . Just press firmly on your brake pedal when you need to slow down or stop.
CAUTION! The Anti-Lock Brake System is subject to possible detrimental effects of electronic interference caused by improperly installed after-market radios or tele- phones. NOTE: During severe braking conditions, a pulsing sensation may occur and a clicking noise will be heard.
build up between the tire tr ead and the road. This hydroplaning action can cause loss of traction, braking ability , and control. • After going through deep water or a car wash, brakes may become wet, resulting in decr eased performance and unpredictable braking action.
CAUTION! Prolonged operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and it should be avoided when possible. Damage to the power steering pump may occur . TIRE SAFETY INFORMA TION Tire Markings NOTE: • P (Passenger)-Metric tir e sizing is based on U.
• European Metric tir e sizing is based on European design standards. T ires designed to this standar d have the tire size molded into the sidewall beginning with the section width. The letter ⬙ P ⬙ is absent from this tir e size designation. Example: 215/65R15 96H • L T (Light T ruck)-Metric tire sizing is based on U.
EXAMPLE: 31 = Overall Diameter in Inches (in) 215 = Section W idth in Millimeters (mm) 65 = Aspect Ratio in Percent (%) —Ratio of section height to section width of tire. 10.5 = Section W idth in Inches (in) R = Construction Code — ⬙ R ⬙ means Radial Construction.
EXAMPLE: —The maximum speed corresponding to the Speed Symbol should only be achieved un- der specified operating conditions. (i.e. tire pr essure, vehicle loading, r oad conditions, and posted speed limits).
EXAMPLE: DOT MA L9 ABCD 0301 DOT = Department of T ransportation —This symbol certifies that the tire is in compliance with the U.S. Department of T ransportation tire safety standards, and is appr oved for highway use. MA = Code repr esenting the tire manufacturing location.
Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressur e is listed on either the face of the driver’s door or the driver’s side “B” pillar .
3) the tire size designed for your vehicle 4) the cold tire inflation pr essures for the fr ont, rear and spare tir es. Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle.
passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (since 5 x 150 = 750, and 1400 – 750 = 650 lbs.) 5. Determine the combined weight of luggage and car go being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4.
ST ARTING AND OPERA TING 277 5.
W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle.
2. Economy— Improper inflation pr essures can cause uneven wear patterns to develop across the tir e tread. These abnormal wear patterns will reduce tr ead life resulting in a need for earlier tire r eplacement. Under inflation also increases tire r olling resistance and r esults in higher fuel consump- tion.
check tire pr essure. Do not make a visual judgement when determining proper inflation. Radial tir es may look properly inflated even when they ar e under inflated. CAUTION! After inspecting or adjusting the tire pressure al- ways reinstall the valve stem cap–if equipped.
Tire Pressures for High Speed Operation The manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tir e inflation pressur e is very important.
W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure someone. Do not spin your vehicle’s wheels faster than 35 mph (55 km/h) when you are stuck, and do not let anyone near a spinning wheel no matter what the speed.
Life of Tire The service life of a tire is dependent upon varying factors including but not limited to: • Driving style • T ire pressur e • Distance driven W ARNING! T ires and spare tire should be replaced after six years, regardless of the remaining tread.
W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combina- tions of unapproved tires and wheels may change suspension dimensions and performance charac- teristics, resulting in changes to steering, han- dling, and braking of your vehicle.
Improper alignment will not cause vehicle vibration. V ibration may be a result of tire and wheel out-of- balance. Proper balancing will r educe vibration and avoid tire cupping and spotty wear . TIRE CHAINS Use “Class S” chains or other traction aids that meet SAE T ype “S” specifications.
These cautions apply to all chain traction devices, includ- ing link and cable (radial) chains. T ire chain use is permitted only on the rear tir es. NOTE: The use of class “S” chains is permitted with P235/65R17 tires. CAUTION! Do not use tire chains on vehicles equipped with tires other than P235/65R17 tires.
NOTE: The Premium T ire Pr essure Monitor System will automatically locate the pressur e values displayed in the correct vehicle position following a tir e rotation. The suggested rotation method is the “forwar d-cross” shown in the following diagram.
The TPM System will warn the driver of a low tire pressur e if the tire pr essure falls below the low pressur e warning threshold for any r eason, including low tem- perature ef fects.
CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equip- ment that is not of the same size, type, and/or style.
Under-inflation also r educes fuel efficiency and tir e tread life, and may af fect the vehicle’s handling and stopping ability . • The TPMS is not a substitute for proper tir e mainte- nance, and.
system will automatically update and the “T ire Pressur e Monitoring T elltale Light” will extinguish once the up- dated tire pr essures have been r eceived. The vehicle may need to be driven for up to 10 minutes above 15 mph (24 km/h) to receive this information.
NOTE: It is particularly important, for you to check the tire pr essure in all of your tir es regularly and to maintain the proper pr essure. The TPMS consists of the following components: • Receive.
NOTE: Y our system can be set to display pressur e units in PSI, kP A or BAR. NOTE: A low spar e tire will not cause the “T ire Pressur e Monitoring T elltale Light” to illuminate or the chime to sound.
by a graphic display , with “- -“ in place of the pressure value(s) indicating which T ire Pressur e Monitoring Sen- sor(s) is not being received. NOTE: Y our system can be set to display pressur e units in PSI, kP A or BAR. If the ignition key is cycled, this sequence will repeat, providing the system fault still exists.
However , driving the vehicle for up to 10 minutes above 15 mph (24 km/h) will display a “CHECK TPM SYS- TEM” text message on the EVIC. This text message will then be followed by a graphic display , with “- -“ in place of the flashing low pressur e value.
FUEL REQUIREMENTS 3.7L Engine (If Equipped) The 3.7L engine is designed to meet all emissions regulations and pr ovide excel- lent fuel economy and performance when using high quality unleaded “regular” gasoline having an octane rating of 87. The use of premium gasoline is not r ecom- mended.
Over 40 auto manufacturer’s world wide have issued and endorsed consistent gasoline specifications (the W orld- wide Fuel Charter , WWFC) to define fuel properties necessary to deliver enhanced emissions, performance, and durability for your vehicle.
manufacturer . While MTBE is an oxygenate made from Methanol, it does not have the negative effects of Metha- nol. MMT In Gasoline MMT is a manganese containing metallic additive that is blended into some gasoline to increase octane. Gasoline blended with MMT provides no performance advantage beyond gasoline of the same octane number without MMT .
• An out-of-tune engine, or certain fuel or ignition malfunctions, can cause the catalytic converter to overheat. If you notice a pungent burning odor or some light smoke, your engine may be out of tune or malfunctioning and may requir e immediate service.
the vehicle is raised. Have any abnormal conditions repair ed promptly . Until repaired, drive with all side windows fully open. • Keep the liftgate closed when driving your vehicle to prevent carbon monoxide and other poisonous ex- haust gases from entering the vehicle.
CAUTION! Damage to the fuel system or emission control system could result from using an improper fuel cap (gas cap). A poorly fitting cap could let impurities into the fuel system. Also, a poorly fitting after- market cap can cause the MIL (Malfunction Indica- tor Light) to illuminate, due to fuel vapors escaping from the system.
NOTE: T ighten the gas cap about 1/4 turn until you hear one click. This is an indication that cap is properly tightened. If the gas cap is not tighten properly , the Malfunction Indicator Light will come on. Be sure the gas cap is tightened every time the vehicle is refueled.
W ARNING! • Never add fuel when the engine is running. • Never have any smoking materials lit in or near the vehicle when the fuel cap is removed or the tank filled.
Each axle GA WR is determined by the components in the system with the lowest load carrying capacity (axle, springs, tires or wheels). Heavier axles or suspension components sometimes specified by purchasers for in- creased durability does not necessarily incr ease the vehi- cle’s GVWR.
or rear axles has been exceeded but the total load is within the specified GVWR. If so, weight must be shifted from fr ont to rear or r ear to front as appropriate until the specified weight limitations are met. Stor e the heavier items down low and be sure that the weight is distributed equally .
Common T owing Definitions The following trailer towing related definitions will assist you in understanding the following information: Gross V ehicle W eight Rating (GVWR) The GVWR is the total allowable weight of your vehicle. This includes driver , passengers, cargo and tongue weight.
Gross Axle W eight Rating (GA WR) The GA WR is the maximum capacity of the front and r ear axles. Distribute the load over the front and r ear axles evenly . Make sure that you do not exceed either front or rear GA WR. W ARNING! It is important that you do not exceed the maximum front or rear GA WR.
W eight-Distributing Hitch A weight-distributing system works by applying lever- age through spring (load) bars. They ar e typically used for heavier loads, to distribute trailer tongue weight to the tow vehicle’s front axle and the trailer axle(s).
W eight Distributing Hitch System Improper Adjustment of W eight Distributing System ST ARTING AND OPERA TING 309 5.
T railer Hitch Classification Y our vehicle is capable of towing trailers up to 2,000 lbs (907 kg) without added equipment or alterations to the standard equipment. Y our vehicle may be factory equipped for safe towing of trailers weighing over 2,000 lbs (907 kg) with the optional T railer T ow Prep Package.
Engine/ T ransmission Model GCWR (Gross Com- bined Wt. Rating) Frontal Area Max. GTW (Gross T railer Wt.) T ongue Wt. (See Note) 3.7L/6-Speed Manual 4x2 8,500 lbs (3 855 kg) 40 Sq. Ft. (3.72 square meters) 3,500 lbs (1 587 kg) 350 lbs (159 kg) 3.7L/6-Speed Manual 4x4 8,750 lbs (3 969 kg) 40 Sq.
4.0L/ Automatic 4x4 7,400 lbs ( 3 356 kg) 32 Sq. Ft. (2.97 square meters) 2,000 lbs (907 kg) 200 lbs (91 kg) 4.0L/ Automatic w/ Cooler 4x2 9,850 lbs (4 468 kg) 64 Sq. Ft. (5.94 square meters) 3,500 lbs (1 588 kg) 350 lbs (159 kg) 4.0L/ Automatic w/ Cooler 4x4 10,100 lbs (4 581 kg) 64 Sq.
Engine/ T ransmission Model GCWR (Gross Com- bined Wt. Rating) Frontal Area Max. GTW (Gross T railer Wt.) T ongue Wt. (See Note) 3.7L/ Automatic w/ Cooler 4x2 9,850 lbs (4 468 kg) 64 Sq. Ft. (5.94 square meters) 5,000 lbs (2 268 kg) 500 lbs (227 kg) 3.
T railer and T ongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer . This places 10% to 15% of the Gross T railer W eight (GTW) on the tow hitch of your vehicle.
NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or dealer-installed options, must be considered as part of the total load on your vehicle.
W ARNING! Improper towing can lead to an injury accident. Follow these guidelines to make your trailer towing as safe as possible: Make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control.
3. GA WR 4. T ongue weight rating for the trailer hitch utilized (This requir ement may limit the ability to always achieve the 10% to 15% range of tongue weight as a percentage of total trailer weight). T owing Requirements — T ires − Do not attempt to tow a trailer while using a compact spare tir e.
− T railer brakes are r ecommended for trailers over 1,000 lbs (454 kg) and requir ed for trailers in excess of 2,000 lbs (907 kg). CAUTION! If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes and they should be of adequate capacity .
NOTE: Do not cut or splice wiring into the vehicles wiring harness. The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector . Refer to the following illustrations. T owing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away fr om heavy traffic.
If using a manual transmission vehicle for trailer towing, all starts must be in FIRST gear to avoid excessive clutch slippage. T owing T ips — Automatic T ransmission The “D” range can be selected when towing. However , if frequent shifting occurs while in this range, the “3” range should be selected.
T owing T ips — Cooling System T o reduce potential for engine and transmission over - heating, take the following actions: − City Driving When stopped for short periods of time, put transmission in neutral and increase engine idle speed. − Highway Driving Reduce speed.
.
WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flashers ................. 3 2 4 䡵 If Y our Engine Overheats ................. 3 2 5 䡵 Jacking And T ire Changing ................ 3 2 6 ▫ Jack Location ........................ 3 2 6 ▫ Spare T ire Stowage .
HAZARD W ARNING FLASHERS Y our vehicle’s hazard warning flasher is an emer gency warning system. When you activate it, all front and r ear directional signals will flash intermittently . Use it when your vehicle is disabled on or near the road. It warns other drivers to steer clear of you and your vehicle.
IF YOUR ENGINE OVERHEA TS In any of the following situations, you can reduce the potential for overheating by taking the appr opriate ac- tion. • On the highways — Slow down. • In city traffic — While stopped, put transmission in N (Neutral), but do not increase engine idle speed.
JACKING AND TIRE CHANGING W ARNING! • Getting under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. Y ou could be crushed. Never get any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift.
Spare Tire Stowage The spare tir e is stowed under the rear of the vehicle by means of a cable winch mechanism. T o remove or stow the spare, use the jack handle to r otate the “spare tir e drive” nut. The nut is located under a plastic cover at the center-r ear of the cargo floor ar ea, just inside the liftgate opening.
Spare Tire Removal Fit the jack handle extension over the drive nut. Use the Lug W rench to r otate the nut counter clockwise until the spare is on the gr ound with enough slack in the cable to allow to pull the tire out fr om under the vehicle. CAUTION! The winch mechanism is designed for use with the jack extension tube only .
• T urn on the Hazard W arning Flasher . • Block both the front and r ear of the wheel diagonally oppo- site of the jacking position. For example, if changing the right front tir e, block the left rear wheel. • Passengers should not remain in the vehicle when the vehicle is being jacked.
4. Locate the jack as shown. For the fr ont tires, place it in the notch on the body weld seam behind wheel to be changed. For the rear tir es, place it under the axle by the wheel to be changed. Position the jack handle on the jack. Do not raise the vehicle until you are sure the jack is fully engaged.
W ARNING! Raising the vehicle higher than necessary can make the vehicle less stable and cause an accident. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 6. Remove the lug nuts and wheel. 7. Position the spar e wheel/tire on the vehicle and install lug nuts with cone-shaped end toward wheel.
JUMP ST ARTING W ARNING! • Battery fluid is a corrosive acid solution; do not allow battery fluid to contact eyes, skin or cloth- ing. Don’t lean over battery when attaching clamps or allow the clamps to touch each other . If acid splashes in eyes or on skin, flush the con- taminated area immediately with large quantities of water .
4. Connect one end of a jumper cable to the positive terminal of the booster battery . Connect the other end of the same cable to the positive terminal of the discharged battery . W ARNING! Do not permit vehicles to touch each other as this could establish a ground connection and personal injury could result.
W ARNING! Any procedure other than above could result in: 1. Personal injury caused by electrolyte squirting out the battery vent; 2. Personal injury or property damage due to battery explosion; 3. Damage to charging system of booster vehicle or of immobilized vehicle.
MAINT AINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment – 3.7L ............... 3 3 8 䡵 Engine Compartment – 4.0L ............... 3 3 9 䡵 Onboard Diagnostic System — OBD II ........ 3 4 0 ▫ Loose Fuel Filler Cap Message ............ 3 4 0 䡵 Emissions Inspection And Maintenance Programs .
▫ Air Conditioner Maintenance ............. 3 5 1 ▫ Power Steering Fluid Check .............. 3 5 2 ▫ Driveline And Steering Component Lubrication .......................... 3 5 3 ▫ Body Lubrication ..................... 3 5 3 ▫ W indshield W iper Blades .
▫ Rear T ail, Stop, T urn Signal, And Back-Up Lights ....................... 3 8 1 ▫ Center High Mounted Stop Light (CHMSL) . . . 381 䡵 Fluid Capacities ........................ 3 8 2 䡵 Fluids, Lubricants And Genuine Parts ........ 3 8 3 ▫ Engine .
ENGINE COMP ARTMENT – 3.7L 338 MAINT AINING YOUR VEHICLE.
ENGINE COMP ARTMENT – 4.0L MAINT AINING YOUR VEHICLE 339 7.
ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems.
cap until a ⬙ clicking ⬙ sound is heard. This is an indication that the gas cap is properly tightened. Pr ess the odometer reset button to turn the message of f. If the problem persists, the message will appear the next time the vehicle is started.
4. As soon as you turn your key to the ON position, you will see your MIL symbol come on as part of a normal bulb check. 5. Appr oximately 15 seconds later , one of two things will happen: a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn of f the ignition key or start the engine.
DEALER SERVICE Y our dealer has the qualified service personnel, special tools, and equipment to perform all service operations in an expert manner . Service Manuals are available which include detailed service information for your vehicle. Refer to these manuals before attempting any pr ocedure yourself.
Checking the oil while the vehicle is on level ground will improve the accuracy of the oil level r eadings. Always maintain the oil level within the SAFE zone on the dipstick. Adding one quart of oil when the reading is at the bottom of the SAFE zone will result in a r eading at the top of the safe zone on these engines.
• More than 50% of your driving is at sustained high speeds during hot weather , above 90°F (32°C) • T axi, Police, or delivery service (commercial service) • T railer towing • If equipped f.
Engine Oil V iscosity (3.7L Engine) SAE 5W -20 engine oil is recommended for all operating temperatures. This engine oil improves low tempera- ture starting and vehicle fuel economy . Y our engine oil filler cap shows the recommended engine oil viscosity for your vehicle.
Engine Oil Filter Selection All of the manufacturer’s engines have a full-flow type disposable oil filter . Use a filter of this type for replace- ment. The quality of replacement filters varies consider - ably . Only high quality filters should be used to assure most efficient service.
Catalytic Converter The catalytic converter requir es the use of unleaded fuel only . Leaded gasoline will destroy the effectiveness of the converter as an emission control device. Under normal operating conditions, the catalytic con- verter will not requir e maintenance.
W ARNING! A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your ex- haust system. Do not park or operate your vehicle in areas where your exhaust system can contact any- thing that can burn.
Crankcase Emission Control System Proper operation of this system depends on fr eedom from sticking or plugging due to deposits. As vehicle mileage builds up, the PCV valve and passages may accumulate deposits. If a valve is not working properly , replace it with a new valve.
Maintenance-Free Battery Y our vehicle is equipped with a maintenance-free battery . Y ou will never have to add water , nor is periodic main- tenance requir ed. W ARNING! Battery posts, terminals, and related accessories con- tain lead and lead compounds.
W ARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs.
W ARNING! Fluid level should be checked on a level surface with the engine off to prevent injury from moving parts, and to insure accurate fluid level reading. Do not overfill. Use only the manufacturer’s recommended fluid. If necessary , add fluid to restore to the pr oper indicated level.
amount of a high quality lubricant such as Mopar 威 Lock Cylinder Lubricant directly into the lock cylinder . Windshield Wiper Blades Clean the rubber edges of the wiper blades and the windshield periodically with a sponge or soft cloth and a mild non-abrasive cleaner .
Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system. If you notice a change in the sound of the exhaust system; or if .
garden hose vertically down the face of the A/C con- denser (if equipped) or the back of the radiator core. Check the engine cooling system hoses for brittle rubber , cracking, tears, cuts, and tightness of the connection at the coolant recovery bottle and radiator .
CAUTION! • Mixing of antifreeze/coolant other than the speci- fied HOA T antifreeze/coolant may result in de- creased corrosion protection and engine damage. If a non-HOA T antifreeze/coolant is introduced into the cooling system in an emergency , it should be replaced with the specified antifreeze/coolant as soon as possible.
Use only high purity water such as distilled or deionized water when mixing the water/antifreeze (coolant) solu- tion. The use of lower quality water will reduce the amount of corrosion pr otection in the engine cooling system.
children, do not stor e ethylene glycol based antifreeze/ coolant in open containers or allow it to remain in puddles on the ground. If ingested by a child, contact a physician immediately .
coolant needs to be added, contents of coolant recov- ery bottle must also be protected against fr eezing. • If frequent antifr eeze/coolant additions are r equired, or if the level in the recovery bottle does not dr op when the engine cools, the cooling system should be pressur e tested for leaks.
are pr esent. Components should be replaced immedi- ately if there is any evidence of degradation that could cause failure. Brake System In order to assur e brake system performance, all brake system components should be inspected periodically . Refer to the appropriate “Maintenance Schedule” in Section 8 for suggested service intervals.
W ARNING! W orn brake hoses can burst and cause brake failure. Y ou could have an accident. If you see any signs of cracking, scuffing, or worn spots, have the brake hoses replaced immediately .
Use only brake fluid that has been in a tightly closed container to avoid contamination from for eign matter . Do not allow petroleum base fluid to contaminate the brake fluid as seal damage will result.
Fluid Level Check — W5A580 (4.0L Engine) Y our vehicle is equipped with a capped dipstick tube, it is sealed and should not be tampered with. Y our autho- rized dealer has the proper tools to ensur e that the fluid level is set properly .
Frequency of Fluid Change Under normal operating conditions, the fluid installed at the factory will give satisfactory lubrication for the life of the vehicle. Fluid changes are not necessary unless the lubricant has become contaminated with water . If con- taminated with water , the fluid should be changed im- mediately .
CAUTION! When replacing plugs, do not overtighten. Y ou could damage them and cause them to leak. Selection of Lubricant Use only manufacturer’s r ecommended fluid, refer to Fluids, Lubricants, and Genuine Parts for correct fluid type. Front/Rear Axle Fluid Fluid Level Check Lubricant should be at bottom edge of the oil fill hole.
The following maintenance recommendations will enable you to obtain maximum benefit from the corr osion resistance built into your vehicle. What Causes Corrosion? Corrosion is the r esult of deterioration or removal of paint and protective coatings fr om your vehicle.
CAUTION! Do not use abrasive or strong cleaning materials such as steel wool or scouring powder , which will scratch metal and painted surfaces. Special Care • If you drive on salted or dusty roads or if you drive near the ocean, hose off the under carriage at least once a month.
heavy soil, use Mopar 威 Wheel Cleaner or select a non- abrasive, non-acidic cleaner . Do not use scouring pads, steel wool, a bristle brush or metal polishes.
W ARNING! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may cause respiratory harm. Glass Surfaces All glass surfaces should be cleaned on a regular basis with Mopar 威 Glass Cleaner or any commercial household-type glass cleaner .
Replace the belts if they appear frayed or worn or if the buckles do not work properly . FUSES (INTEGRA TED POWER MODULE) The T otally Integrated Power Module (TIPM) is located in the engine compartment near the battery . This center contains cartridge fuses, mini fuses and relays.
Cavity Cartridge Fuse Mini Fuse Description J1 40 Amp Green Power Folding Seat J2 30 Amp Pink T ransfer Case/Pwr Liftgate Module J3 40 Amp Green Rear Door Module (RR DOOR NODE) J4 25 Amp Natural Drive.
Cavity Cartridge Fuse Mini Fuse Description J19 60 Amp Y ellow Radiator Fan J20 30 Amp Pink Front W iper LO/HI J21 20 Amp Y ellow Front/Rear W asher J22 25 Amp Natural Sunroof Module M1 20 Amp Y ellow.
Cavity Cartridge Fuse Mini Fuse Description M10 20 Amp Y ellow Ignition Off Draw — V ehicle Entertainment System (IOD-VES), Satellite Digital Audio Receiver (SDARS), DVD, Hands Free Module (HFM), RA.
Cavity Cartridge Fuse Mini Fuse Description M15 20 Amp Y ellow COL MOD, IR SNS, Heater V entilation, Air Conditioning/ Automatic T empera- ture Contr ol (HV AC/ A TC), Rear V iew Mirror (RR VW MIR), C.
Cavity Cartridge Fuse Mini Fuse Description M21 20 Amp Y ellow Auto Shut Down (ASD #3) M22 10 Amp Red Right Horn (R T HORN (HI/LOW) M23 10 Amp Red Left Horn (L T HORN (HI/LOW) M24 25 Amp Natural Rear .
Cavity Cartridge Fuse Mini Fuse Description M33 10 Amp Red Next Generation Con- troller (NGC), Global Powertrain Engine Controller (GPEC) M34 10 Amp Red Park Assist (PRK ASST), Heater V enti- lation, .
CAUTION! • When installing the Integrated Power Module cover , it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the Integrated Power Module, and possibly result in a electrical system failure.
BULB REPLACEMENT Head Light 1. Open the hood. 2. Reach behind the headlamp unit in the engine com- partment to access the headlamp bulb lock ring. 3. Firmly grasp the lock ring on the back of the headlamp unit housing. 4. Rotate the lock ring on the back of the headlamp housing counter-clockwise to unlock it.
4. Disconnect the electrical connector and r eplace the bulb. Front Side Marker 1. Open the hood. 2. Remove the grille assembly , as follows: a. Remove eight fasteners. b. Remove two scr ews from each headlamp. c. Remove two scrivets fr om the center of the grille.
Rear T ail, Stop, T urn Signal, and Back-Up Lights 1. Open the lift gate. 2. Remove the two push pins. 3. Pull lamp straight back and disconnect electrical con- nection. 4. Remove the two scr ews attaching the backplate to the lamp assembly . 5. Pull the backplate straight back fr om the lamp hous- ing.
FLUID CAP ACITIES U.S. Metric Fuel (Approximate) 19.5 Gallons 73.8 Liters Engine Oil with Filter 3.7 Liter Engine (SAE 5W -20, API Certified Engine Oil) 5 Qts 4.7 Liters 4.0 Liter Engine (SAE 10W -30, API Certified Engine Oil) 6 Qts 5.7 Liters Cooling System * 3.
FLUIDS, LUBRICANTS AND GENUINE P ARTS Engine Component Fluids, Lubricants and Genuine Parts Engine Coolant Mopar 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Or- ganic Additive T echnology) or equivalent. Engine Oil (3.7L Engine) Use SAE 5W -20, API Certified, meeting material standar d MS-6395 or equiva- lent.
Chassis Component Fluids, Lubricants and Genuine Parts. Automatic T ransmission Mopar 威 A TF+4, Automatic T ransmission Fluid. Manual T ransmission Mopar 威 Manual T ransmission Lubricant or equivalent (meeting the re- quirements of DaimlerChrysler Material Standar d MS-9224) T ransfer Case Mopar 威 A TF+4, Automatic T ransmission Fluid.
MAINTENANCE SCHEDULES CONTENTS 䡵 Emission Control System Maintenance ........ 3 8 6 䡵 Maintenance Schedules ................... 3 8 6 ▫ Schedule “B” .
EMISSION CONTROL SYSTEM MAINTENANCE The “Scheduled” maintenance services, listed in bold type must be done at the times or mileages specified to assure the continued pr oper functioning of the emission control system.
• Off-r oad or desert driving NOTE: If ANY of these apply to you then change your engine oil every 3,000 miles (5 000 km) or 3 months, whichever comes first and follow “Schedule B” of the “Maintenance Schedules” section of this manual.
Once a Month • Check the tire pr essure and look for unusual wear or damage. • Inspect the battery and clean and tighten the terminals as requir ed. • Check the fluid levels of the coolant reservoir , brake master cylinder , and transmission, and add as needed.
Schedule “B” Follow this schedule if you usually operate your vehicle under one or more of the following conditions. • Day or night temperatures ar e below 32°F (0°C) • Stop and go driving • Excessive engine idling • Driving in dusty conditions • Short trips of less than 10 miles (16.
Miles 3,000 6,000 9,000 12,000 15,000 (Kilometers) (5 000) (10 000) (15 000) (20 000) (25 000) Change the engine oil and engine oil filter , if not replaced at 3 months. X X XXX Rotate the tires. X X Inspect the engine air filter element, replace if necessary .
Miles 18,000 21,000 24,000 27,000 30,000 (Kilometers) (30 000) (35 000) (40 000) (45 000) (50 000) Change the engine oil and engine oil filter , if not replaced at 3 months. X X XXX Rotate the tires. X X X Inspect the engine air filter element, replace if necessary .
Miles 33,000 36,000 39,000 42,000 45,000 (Kilometers) (55 000) (60 000) (65 000) (70 000) (75 000) Change the engine oil and engine oil filter , if not replaced at 3 months. X X XXX Rotate the tires. X X Inspect the engine air filter element, replace if necessary .
Miles 48,000 51,000 54,000 57,000 60,000 (Kilometers) (80 000) (85 000) (90 000) (95 000) (100 000) Change the engine oil and engine oil filter , if not replaced at 3 months. X X XXX Rotate the tires. X X X Inspect the engine air filter element, replace if necessary .
Miles 48,000 51,000 54,000 57,000 60,000 (Kilometers) (80 000) (85 000) (90 000) (95 000) (100 000) Drain and refill the transfer case fluid. X Flush and replace the engine coolant/anti-fr eeze.
Miles 63,000 66,000 69,000 72,000 75,000 (Kilometers) (105 000) (1 10 000) (1 15 000) (120 000) (125 000) Change the engine oil and engine oil filter , if not replaced at 3 months. X X XXX Rotate the tires. X X Inspect the engine air filter element, replace if necessary .
Miles 78,000 81,000 84,000 87,000 90,000 (Kilometers) (130 000) (135 000) (140 000) (145 000) (150 000) Change the engine oil and engine oil filter , if not replaced at 3 months. X X XXX Rotate the tires. X X X Inspect the engine air filter element, replace if necessary .
Miles 93,000 96,000 99,000 102,000 105,000 (Kilometers) (155 000) (160 000) (165 000) (170 000) (175 000) Change the engine oil and engine oil filter , if not replaced at 3 months. X X XXX Rotate the tires. X X Inspect the engine air filter element, replace if necessary .
Miles 108,000 1 1 1,000 1 14,000 1 17,000 120,000 (Kilometers) (180 000) (185 000) (190 000) (195 000) (200 000) Change the engine oil and engine oil filter , if not replaced at 3 months. X X XXX Rotate the tires. X X X Inspect the engine air filter element, replace if necessary .
Miles 108,000 1 1 1,000 1 14,000 1 17,000 120,000 (Kilometers) (180 000) (185 000) (190 000) (195 000) (200 000) Drain and refill the transfer case fluid. X Flush and replace the engine coolant/anti-fr eeze, if not replaced at 102,000 miles (170 000 km).
Miles 123,000 126,000 129,000 132,000 135,000 (Kilometers) (205 000) (210 000) (215 000) (220 000) (225 000) Change the engine oil and engine oil filter , if not replaced at 3 months. X X XXX Rotate the tires. X X Inspect the engine air filter element, replace if necessary .
Miles 138,000 141,000 144,000 147,000 150,000 (Kilometers) (230 000) (235 000) (240 000) (245 000) (250 000) Change the engine oil and engine oil filter , if not replaced at 3 months. X X XXX Rotate the tires. X X Inspect the engine air filter element, replace if necessary .
Inspection and service should also be performed anytime a malfunction is observed or suspected. Retain all re- ceipts. † Applies only if vehicle is used for frequent trailer towing or fleet/commercial service. 〫 This maintenance is recommended by the manufac- turer to the owner , but is not requir ed to maintain emissions warranty .
Schedule “A” Miles 6,000 12,000 18,000 24,000 30,000 (Kilometers) (10 000) (20 000) (30 000) (40 000) (50 000) [Months] [6] [12] [18] [24] [30] Change the engine oil and engine oil filter . X X X X X Rotate the tires. X X X X X Inspect the engine air filter element, and replace if necessary .
Miles 36,000 42,000 48,000 54, 000 (Kilometers) (60 000) (70 000) (80 000) (90 000) [Months] [36] [42] [48] [54] Change the engine oil and engine oil filter .
Miles 60,000 66,000 72,000 78,000 (Kilometers) (100 000) (110 000) (120 000) (130 000) [Months] [60] [66] [72] [78] Change the engine oil and engine oil filter . X X X X Rotate the tires. X X X X Inspect the engine air filter element, and replace if necessary .
Miles 84,000 90,000 96,000 102, 000 (Kilometers) (140 000) (150 000) (160 000) (170 000) [Months] [84] [90] [96] [102] Change the engine oil and engine oil filter . X X X X Rotate the tires. X X X X Inspect the engine air filter element, and replace if nec- essary .
Miles 84,000 90,000 96,000 102, 000 (Kilometers) (140 000) (150 000) (160 000) (170 000) [Months] [84] [90] [96] [102] Inspect the manual transmission fluid, add as necessary (3.
Miles 108,000 1 14,000 120,000 126,000 (Kilometers) (180 000) (190 000) (200 000) (210 000) [Months] [108] [1 14] [120] [126] Change the engine oil and engine oil filter . X X X X Rotate the tires. X X X X Inspect the engine air filter element, and replace if necessary .
Miles 132,000 138,000 144,000 150,000 (Kilometers) (220 000) (230 000) (240 000) (250 000) [Months] [132] [138] [144] [150] Change the engine oil and engine oil filter . X X X X Rotate the tires. X X X X Inspect the engine air filter element, and replace if nec- essary .
Miles 132,000 138,000 144,000 150,000 (Kilometers) (220 000) (230 000) (240 000) (250 000) [Months] [132] [138] [144] [150] Flush and replace the engine coolant/anti-fr eeze, if not done at 120,000 miles (200 000 km). X Inspection and service should also be performed anytime a malfunction is observed or suspected.
IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V e h i c l e .............................. 4 1 2 ▫ Prepar e For The Appointment ............ 4 1 2 ▫ Prepar e A List ........................ 4 1 2 ▫ Be Reasonable W ith Requests .
SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty , discuss additional charges with the service manager .
technicians, special tools, and the latest information to assure your vehicle is fixed corr ectly and in a timely manner . This is why you should always talk to your dealer’s service manager first.
Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its Customer Center .
W ARRANTY INFORMA TION (U.S. V ehicles Only) See the W arranty Information Booklet for the terms and provisions of DaimlerChrysler’s warranties applicable to this vehicle. MOP AR 姞 P ARTS Mopar 威 fluids, lubricants, parts, and accessories are available from your dealer .
PUBLICA TION ORDER FORMS T o order the following manuals, you may use either the website or the phone numbers listed below . V isa, Mas- tercar d, American Express, and Discover or ders are ac- cepted. If you prefer mailing your payment, please call for an order form.
Call T oll Free at: • 1–800–890–4038 (U.S.) • 1–800–387–1 143 (Canada) Or V isit us on the W orld Wide W eb at: • www .techauthority .
on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction perfor - mance. W ARNING! The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics.
INDEX 10.
ABS (Anti-Lock Brake System) ............ 169,265 Adding Fuel ........................... 3 0 0 Adding W asher Fluid ..................... 1 5 6 Air Cleaner , Engine (Engine Air Cleaner Filter) . . . 350 Air Conditioner Maintenance ............... 3 5 1 Air Conditioning .
Autostick ............................. 2 5 6 Auxiliary Electrical Outlet (Power Outlet) ...... 1 4 4 Auxiliary Power Outlet ................... 1 4 4 A x l e F l u i d ............................. 3 8 4 Battery ............................... 3 5 1 Charging .
C a r g o L i g h t ............................ 1 5 0 Cargo Load Floor ........................ 1 5 1 Cargo Slide Out System L o a d N G o ........................... 1 5 3 Cargo T ie-Downs ........................ 1 5 0 Catalytic Converter .........
Selection of Coolant (Antifreeze) ...... 356,382,383 T emperature Gauge ..................... 1 6 4 Corrosion Pr otection ..................... 3 6 6 Crankcase Emission Control System .......... 3 5 0 C u p H o l d e r ............................ 1 4 7 Customer Assistance .
Emission Control System Maintenance ...... 341,386 Engine Air Cleaner .......................... 3 5 0 Block Heater ......................... 2 4 3 Break-In Recommendations ................ 7 4 Compartment ...................... 338,339 Compartment Identification .
Flooded Engine Starting ................... 2 4 0 Fluid, Brake ........................... 3 8 4 Fluid Capacities ......................... 3 8 2 Fluid Leaks ............................. 7 6 Fluid Level Checks ...................... 3 6 6 Automatic T ransmission .
Gauges Coolant T emperature .................... 1 6 4 Fuel ................................ 1 6 4 Odometer ........................... 1 7 2 Speedometer ......................... 1 6 6 T achometer .......................... 1 7 0 Gear Ranges ........
Inflation Pressur e T ires .................... 2 7 9 Information Center , V ehicle ................. 1 7 9 Inside Rearview Mirror .................... 8 1 Instrument Cluster .................... 163,164 Instrument Panel and Contr ols .............. 1 6 2 Instrument Panel Lens Cleaning .
Bulb Replacement ................... 378,379 C a r g o .............................. 1 5 0 Center Mounted Stop ................... 3 8 1 C r u i s e .............................. 1 7 4 Daytime Running ...................... 1 2 2 Dimmer Switch, Headlight .
Lower Anchors and T ether for CHildren (LA TCH) ................... 6 8 , 6 9 Lubrication, Body ....................... 3 5 3 Luggage Carrier ......................... 1 5 7 Maintenance Free Battery .................. 3 5 1 Maintenance Procedur es ...
Odometer T r i p ................................ 1 7 4 Oil, Engine ......................... 343,383 Capacity ............................ 3 8 2 Dipstick ............................. 3 4 3 F i l t e r ............................ 346,383 Identification Logo .
Sunroof ............................. 1 4 1 W indows ............................. 3 1 Power Steering Fluid ..................... 3 8 4 Pregnant W omen and Seat Belts .............. 4 5 Preparation for Jacking .................... 3 2 8 Pretensioners Seat Belts .
Rotation, T ires .......................... 2 8 6 Safety Checks Inside V ehicle ................. 7 5 Safety Checks Outside V ehicle ............... 7 6 Safety Defects, Reporting .................. 4 1 5 Safety Information, T ire ................... 2 6 9 Safety T ips .
Settings, Personal ........................ 1 8 8 Shift Lock Manual Override ................ 2 4 8 Shift Speeds, Manual T ransmission ........... 2 4 5 Shifting Automatic T ransmission ............... 249,254 Manual T ransmission ................... 2 4 3 Shoulder Belts .
System, Navigation ...................... 2 1 9 System, Remote Starting .................... 2 6 T able, Utility ........................... 1 5 2 T achometer ............................ 1 7 0 T emperature Gauge, Engine Coolant .......... 1 6 4 T ether Anchor , Child Restraint .
Disabled V ehicle ....................... 3 3 4 G u i d e .............................. 3 1 0 Recreational .......................... 3 2 1 W e i g h t .............................. 3 1 0 T raction Control ...................... 129,169 T r a i l e r T o w i n g .
Universal T ransmitter ..................... 1 3 4 Upholstery Care ........................ 3 6 9 Utility T able ........................... 1 5 2 V acuum/V apor Harnesses ................. 3 6 0 V a n i t y M i r r o r s ........................... 8 4 V ariance, Compass .
デバイスDodge 2007 Nitroの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Dodge 2007 Nitroをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはDodge 2007 Nitroの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Dodge 2007 Nitroの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Dodge 2007 Nitroで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Dodge 2007 Nitroを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はDodge 2007 Nitroの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Dodge 2007 Nitroに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちDodge 2007 Nitroデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
