Dodgeメーカー2007 Ram 3500の使用説明書/サービス説明書
ページ先へ移動 of 568
T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................. 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE .............................. 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ...........
.
INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 䡵 How T o Use This Manual .................. 4 䡵 W arnings And Cautions ................... 6 䡵 V an Conversions/Campers ................. 6 䡵 V ehicle Identification Number .
INTRODUCTION This manual has been prepar ed with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a W arranty Information Booklet and various customer oriented documents.
INTRODUCTION 5 1.
W ARNINGS AND CAUTIONS This manual contains W ARNINGS against operating procedur es which could result in an accident or bodily injury . It also contains CAUTIONS against procedures which could result in damage to your vehicle. If you do not read this entir e manual you may miss important information.
VEHICLE IDENTIFICA TION NUMBER The vehicle identification number (VIN) is found on the left front corner of the instr ument panel, visible through the windshield. This number also appears on the Auto- mobile Information Disclosure Label af fixed to a window on your vehicle, the vehicle registration and title.
.
THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W ord About Y our Keys .................. 1 2 ▫ Ignition Key Removal ................... 1 2 ▫ Locking Doors W ith The Key .............. 1 4 䡵 Steering Wheel Lock — If Equipped ....
䡵 Remote Keyless Entry — If Equipped ......... 2 0 ▫ T o Unlock The Doors ................... 2 0 ▫ T o Lock The Doors ..................... 2 1 ▫ Using The Panic Alarm .................. 2 2 ▫ General Information .................... 2 2 ▫ T ransmitter Battery Service .
▫ Driver And Right Front Passenger Supplemental Restraint System (SRS)—Airbags ........... 4 7 ▫ Event Data Recorder (EDR) ............... 5 8 ▫ Child Restraint ........................ 6 0 䡵 Occupant Restraints (2500/3500/Mega Cab Only) ...
A WORD ABOUT YOUR KEYS The dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys fr om your dealer . Ask your dealer for these numbers and keep them in a safe place. Ignition Key Removal Automatic T ransmission Place the shift lever in P ARK.
NOTE: If you try to remove the key befor e you place the lever in P ARK, the key may become trapped temporarily in the ignition cylinder . If this occurs, rotate the key to the right slightly , then remove the key as described.
Manual T ransmission—If Equipped When the steering wheel is in the LOCK position, the steering and ignition systems are locked to pr ovide antitheft protection for your vehicle. It may be dif ficult to turn the key from the LOCK position when starting your vehicle.
STEERING WHEEL LOCK — IF EQUIPPED Y our vehicle may be equipped with a passive steering wheel lock. This lock prevents steering the vehicle with- out the ignition key . If the steering wheel is moved no more than 1/2 turn in either dir ection and the key is not in the ignition switch, the steering wheel will lock.
the vehicle. The system will shut the engine off in two (2) seconds if someone uses an invalid key to start the engine. NOTE: A key , which has not been programmed, is also considered an invalid key even if it is cut to fit the ignition lock cylinder for that vehicle.
NOTE: When having the Sentry Key System serviced, bring all vehicle keys to the dealer . Customer Key Programming Y ou can program new keys to the system if you have two valid keys by doing the following: 1. Cut the additional Sentry Key T ransponder blank(s) to match the ignition switch lock cylinder key code.
General Information The Sentry Key system complies with FCC rules part 15 and with RSS-210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference that may be received, including interfer ence that may cause undes- ired operation.
NOTE: If the SECURITY light stays on continuously during vehicle operation, have the system checked by your dealer . T o Disarm the System: Use the Keyless Entry transmitter to unlock the door .
REMOTE KEYLESS ENTR Y — IF EQUIPPED This system allows you to lock or unlock the doors from distances up to about 23 feet (7 meters) using a hand held radio transmitter .
4. Release both buttons at the same time. 5. This will allow you to unlock all doors on the first press of the UNLOCK button. T o lock the doors: Press and r elease the LOCK button on the transmitter to lock all doors. If the ignition is OFF , when the doors are locked, the parking lights will flash on once and the horn will chirp once.
4. T o reactivate this featur e, repeat the above steps. Using the Panic Alarm T o activate the Panic mode while the ignition is OFF press and release the P ANIC button on the transmitter once. When the Panic mode is activated, the interior lights will illuminate, the headlamps and parking lights will flash, and the horn will sound.
2. Closeness to a radio transmitter such as a radio station tower , airport transmitter , and some mobile or CB radios. T ransmitter Battery Service The recommended r eplacement battery is a 3V lithium 2016 cell. This transmitter requir es two batteries.
REMOTE ST ARTING SYSTEM — (GAS ENGINE ONL Y) Y our vehicle may be equipped with a remote starting system, which will allow the vehicle to be started from distances up to approximately 300 feet away fr om the vehicle using the remote keyless entry key fob which is part of your ignition key .
T o enter the vehicle while the engine is running during a remote start, you must first unlock the vehicle using the UNLOCK button on the key fob. After the vehicle is unlocked, you have 60 seconds to.
DOOR LOCKS Manual Door Locks Front and Rear doors may be locked, by moving the lock plunger up or down. All doors may be opened with the inside door handle without lifting the lock plunger . Doors locked before closing will remain locked when closed. The ignition key will unlock all the locks on your vehicle.
Power Door Locks — If Equipped A power door lock switch is on each front door trim panel. Use this switch to lock or unlock the doors. If you press the power door lock switch while the key is in the ignition, and any front door is open, the power locks will not operate.
2. Fasten your seat belt (Fastening the seat belt will cancel any chiming that may confuse you during this programming pr ocedure). 3. Place the key into the ignition. 4. W ithin 15 seconds cycle the key from the LOCK position to the ON/RUN position a minimum of four times; ending in the LOCK position (do not start the engine) 5.
4. W ithin 15 seconds, cycle the key from the LOCK position to the ON/RUN position a minimum of four times ending in the LOCK position (do not start the engine) . 5. W ithin 30 seconds, press the driver’s door lock switch in the UNLOCK direction. 6.
T o use the system, open each rear door , insert the tip of the ignition key or alike object into the lock control lever , slide the lever UP to engage the locks and DOWN to disengage the child-protection locks.
WINDOWS Power Windows—If Equipped The control on the left fr ont door panel has up-down switches that give you fingertip control of all power windows. There is a single opening and closing switch on the front passenger door for passenger window contr ol and on the rear doors of Quad Cab and Mega Cab models.
Auto Down (Driver’s Side Only) The driver’s window switch has an Auto Down feature. Press the window switch past the detent, r elease, and the window will go down automatically . W indow Lockout Switch (4 Door Models Only) The window lockout switch on the driver’s door allows you to disable the window control on the other doors.
Wind Buffeting W ind buffeting can be described as the perception of pressur e on the ears or a helicopter type sound in the ears. Y our vehicle may exhibit wind buffeting with the windows down or partially open positions. This is a normal occurrence and can be minimized.
Buckle up even though you are an excellent driver , even on short trips. Someone on the road may be a poor driver and cause a collision that includes you. This can happen far away from home or on your own str eet. Research has shown that seat belts save lives, and that they can reduce the seriousness of injuries in a collision.
W ARNING! It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts.
Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door . Sit back and adjust the seat. 2. The seat belt latch plate is above the back of the fr ont seat, next to your arm in the rear seat. Grasp the latch plate and pull out the belt.
3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” W ARNING! • A belt buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries.
4. Position the lap belt acr oss your thighs, below your abdomen. T o remove slack in the lap belt portion, pull up on the shoulder belt. T o loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision.
5. Position the shoulder belt on your chest so that it is comfortable and not resting on your neck. The r etractor will withdraw any slack in the belt. 6. T o release the belt, push the r ed button on the buckle. The belt will automatically retract to its stowed position.
The black buckle latch plate can be removed when the key is pressed into the buckle. Allow the retractor to take up the surplus webbing, and the buckles will hang vertically from the cab back exit bezel, thus fr eeing up all the area behind the fr ont seats.
Inserting Latch Plate In Use Position THINGS TO KNOW BEFORE ST ARTING YOUR VEHICLE 41 2.
W ARNING! If the black latch and buckle are not connected when the seat belt is used by an occupant, the seat belt will not restrain you properly . Adjustable Upper Shoulder Belt Anchorage In the front r ow outboard seats, the shoulder belt can be adjusted upward or downwar d to help position the belt away from your neck.
Automatic Locking Retractors (ALR) Mode – If Equipped In this mode, the shoulder belt is automatically pre- locked. The belt will still retract to r emove any slack in the shoulder belt. The automatic locking mode is avail- able on all passenger seating positions with a combina- tion lap/shoulder belt.
W ARNING! • A lap belt worn too loose or too high is dangerous. • A belt worn too loose can allow you to slip down and under the belt in a collision. • A belt that is too loose or too high will apply crash forces to the abdomen, not to the stronger hip bones.
if the ignition is cycled, driver’s seat belt is unbuckled for more than 10 seconds and the vehicle speed is gr eater than 5 mph (8 km/h). The Enhanced W arning System (BeltAlert) can be en- abled o.
Seat Belts and Pregnant Women W e recommend that pr egnant women use seat belts throughout their pr egnancies. Keeping the mother safe is the best way to keep the baby safe. Pregnant women should wear the lap part of the belt across the thighs and as snug against the hips as possible.
Driver And Right Front Passenger Supplemental Restraint System (SRS)—Airbags This vehicle has airbags for both the driver and right front passenger as a supplement to the seat belt r estraint systems. The driver’s front airbag is mounted in the steering wheel.
W ARNING! • Do not put anything on or around the front airbag covers or attempt to manually open them. Y ou may damage the airbags and you could be injured be- cause the airbags are no longer functional. These protective covers for the airbag cushions are de- signed to open only when the airbags are inflating.
Here ar e some simple steps you can follow to minimize the risk of harm from a deploying airbag. 1. Childr en 12 years and under should always ride buckled up in a rear seat in an appr opriate child restraint. Infants in rear -facing child restraints should NEVER ride in the front seat of a vehicle with a passenger fr ont airbag.
W ARNING! • Relying on the airbags alone could lead to more severe injuries in a collision. The airbags work with your seat belt to restrain you properly . In some collisions the airbags won’t deploy at all. Always wear your seat belts even though you have airbags.
• Driver and Front Passenger Seat Belt Pr etensioners • Driver Seat T rack Position Sensor (If Equipped) • Passenger Side Frontal Airbag ON/OFF Switch (Stan- dard Cab V ehicles Only) • Passeng.
W ARNING! Ignoring the AIRBAG warning light in your instru- ment panel could mean you won’t have the airbags to protect you in a collision. If the light does not come on, stays on after you start the vehicle, or if it comes on as you drive, have the airbag system checked right away .
units. A large quantity of nontoxic gas is generated to inflate the front airbags. Dif ferent airbag inflation rates may be possible based on collision severity and occu- pant size. The steering wheel hub trim cover and the upper right side of the instrument panel separate and fold out of the way as the bags inflate to their full size.
Passenger Airbag On/Off Switch – (Standard Cab V ehicles Only) The passenger front airbag is to be turned of f only if the passenger: • is an infant (less than 1 year old) who must ride in the fro.
W ARNING! Whenever an airbag is turned off, even a lap/ shoulder belted passenger may hit their head, neck, or chest on the dashboard (instrument panel) or windshield in a crash.
If you do have a collision which deploys the airbags, any or all of the following may occur: • The nylon airbag material may sometimes cause abra- sions and/or skin reddening to the driver and fr ont passenger as the airbags deploy and unfold.
Maintaining Y our Airbag System W ARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. Y ou could be injured if the airbag system is not there to protect you.
• The light flickers or comes on and remains on while driving. NOTE: If the speedometer , tachometer or any engine related gauges ar e not working, the airbag control mod- ule may also be disabled. The airbags may not be ready to inflate for your protection.
may be released for incorporation in aggr egate crash databases, such as those maintained by the US govern- ment and various states. Data of a potentially sensitive nature, such as would identify a particular driver , ve- hicle, or crash, will be treated confidentially .
Child Restraint Everyone in your vehicle needs to be buckled up all the time — babies and children, too. Every state in the United States and all Canadian provinces r equire that small children ride in pr oper restraint systems. This is the law , and you can be prosecuted for ignoring it.
Infants and Small Children There ar e differ ent sizes and types of restraints for children fr om newborn size to the child almost large enough for an adult safety belt.
• The belt-positioning booster seat is for children weigh- ing more than 40 lbs (18 kg), but who ar e still too small to fit the vehicle’s seat belts properly . If the child cannot sit with knees bent over the vehicle’s seat cushion while the child’s back is against the seat back, they should use a belt-positioning-booster seat.
Here are some tips for getting the most out of your child restraint: • Before buying any r estraint system, make sure that it has a label certifying that it meets all applicable Safety Standards. W e also recommend that you make sure that you can install the child restraint in the vehicle where you will use it befor e you buy it.
• If the belt still can’t be tightened, or if pulling and pushing on the restraint loosens the belt, disconnect the latch plate from the buckle, turn the latch plate around, and insert the latch plate into the buckle again. If you still can’t make the child restraint secur e, try a differ ent seating position.
NOTE: For children riding in the fr ont seat of a Stan- dard Cab model r efer to the “Passenger Airbag On/Off Switch” located in this section. Standard Cab Passenger Seat Quad Cab Rear Outboard Se.
Child restraint systems having attachments designed to connect to the lower anchorages are now available. Child restraints having tether straps and hooks for connection to the seatback tether anchorage have been available for some time.
Installing the Child Restraint System W ARNING! Do not install child restraint systems equipped with LA TCH attachments in the center position of a Quad Cab model rear seat. The LA TCH anchorages in this seat are designed for the two outboard seating posi- tions only .
W ARNING! Improper installation of a child restraint to the LA TCH anchorages can lead to failure of an infant or child restraint. The child could be badly injured or killed. Follow the manufacturer’s directions exactly when installing an infant or child restraint.
2. Lift the cover (if so equipped), and attach the hook to the square opening in the sheet metal. 3. Install the child r estraint and remove the slack in the tether strap according to the manufactur er’s instructions. Multiple Child Restraint Installation Sequence - (Quad Cab Rear Seats) 1.
5. Place a child r estraint on the center rear seat and adjust the tether strap so that it will reach under the head restraint to the tether anchor dir ectly behind the seat and to the anchor directly behind the right seat.
Multiple Child Restraint Quad Cab THINGS TO KNOW BEFORE ST ARTING YOUR VEHICLE 71 2.
Children T oo Large for Booster Seats Children who ar e large enough to wear the shoulder belt comfortably , and whose legs are long enough to bend over the front of the seat when their back is against the seat back should use the lap/shoulder belt in a rear seat.
W ARNING! In a collision, you and your passengers can suffer much greater injuries if you are not properly buck- led up. Y ou can strike the interior of your vehicle or other passengers, or you can be thrown out of the vehicle. Always be sure you and others in your vehicle are buckled up properly .
W ARNING! It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts.
Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door . Sit back and adjust the seat. 2. The seat belt latch plate is above the back of the fr ont seat, next to your arm in the rear seat. Grasp the latch plate and pull out the belt.
3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” W ARNING! • A belt buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries.
4. Position the lap belt acr oss your thighs, below your abdomen. T o remove slack in the lap belt portion, pull up on the shoulder belt. T o loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision.
5. Position the shoulder belt on your chest so that it is comfortable and not resting on your neck. The r etractor will withdraw any slack in the belt. 6. T o release the belt, push the r ed button on the buckle. The belt will automatically retract to its stowed position.
Standard Cab Front Center Three Point Belt 1. The fr ont center seat belt on the Standard Cab may be disconnected to open up utilization of the storage areas behind the front seats. The black latch plate can be detached from the black keyed seat belt buckle located on the inboard side of the passenger seat.
W ARNING! • If the black latch and black buckle are not prop- erly connected when the seat belt is used by an occupant, the seat belt will not be able to provide proper restraint and will increase the risk of injury in a collision. • When reattaching the black latch and black buckle, ensure the seat belt webbing is not twisted.
W ARNING! If the black latch and buckle are not connected when the seat belt is used by an occupant, the seat belt will not restrain you properly . Adjustable Upper Shoulder Belt Anchorage In the front r ow outboard seats, the shoulder belt can be adjusted upward or downwar d to help position the belt away from your neck.
As a guide, if you are shorter than average, you will prefer a lower position, and if you ar e taller than average, you’ll prefer a higher position. When you r elease the anchorage, try to move it up or down to make sure that it is locked in position.
Center Lap Belts The center seating position for the Quad Cab front seat has a lap belt only . T o fasten the lap belt, slide the latch plate into the buckle until you hear a ⬙ click. ⬙ T o lengthen the lap belt, tilt the latch plate and pull. T o remove slack, pull the loose end of the webbing.
Enhanced Driver Seat Belt Reminder System (BeltAlert) If the driver’s seat belt has not been buckled within 60 seconds of starting the vehicle and if the vehicle speed is greater than 5 mph (8 km/h), the Enhanced W arning System (BeltAlert) will alert the driver to buckle their seat belt.
The Enhanced W arning System (BeltAlert) can be reacti- vated by repeating this pr ocedure. NOTE: Although the Enhanced W arning System (BeltAlert) has been deactivated, the Seat Belt W arning Light will continue to illuminate while the driver’s seat belt remains unbuckled.
Driver And Right Front Passenger Supplemental Restraint System (SRS)—Airbag This vehicle has front airbags for both the driver and front passenger as a supplement to the seat belt r estraint systems. The driver’s front airbag is mounted in the center of the steering wheel.
W ARNING! • Do not put anything on or around the airbag covers or attempt to manually open them. Y ou may damage the airbags and you could be injured because the airbags are not there to protect you. These protective covers for the airbag cushions are designed to open only when the airbags are inflating.
Here ar e some simple steps you can follow to minimize the risk of harm from a deploying airbag. • Children 12 years and under should ride buckled up in a rear seat, if available.
W ARNING! • Relying on the airbags alone could lead to more severe injuries in a collision. The airbags work with your seat belt to restrain you properly . In some collisions the airbags won’t deploy at all. Always wear your seat belts even though you have airbags.
The W indow Airbag System, on vehicles equipped, consists of the following: • AIRBAG Readiness Light (shared with the fr ont airbag system) • W indow Bags Above the Side W indows.
W ARNING! Ignoring the AIR BAG light in your instrument panel could mean you won’t have the airbags to protect you in a collision. If the light does not come on, stays on after you start the vehicle, or if it comes on as you drive, have the airbag system checked right away .
Passenger Airbag On/Off Switch – (Standard Cab V ehicles Only) The passenger front airbag is to be turned of f only if the passenger: • is an infant (less than 1 year old) who must ride in the fro.
W ARNING! Whenever an airbag is turned off, even a lap/ shoulder belted passenger may hit their head, neck, or chest on the dashboard (instrument panel) or windshield in a crash.
If you do have a collision which deploys the airbags, any or all of the following may occur: • The nylon airbag material may sometimes cause abra- sions and/or skin reddening to the driver and fr ont passenger as the airbags deploy and unfold.
W indow Airbags Supplemental Restraint System (SRS)—If Equipped The window airbag control module determines if a side collision is severe enough to r equire the side airbags to inflate. The window airbag control module will not detect roll over , front or r ear collisions.
Maintaining Y our Airbag Systems W ARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. Y ou could be injured because the airbags are not there to protect you.
for blown fuses. Refer to the label located on the inside of the fuse block cover for the proper airbag fuses. See your dealer if the fuse is good. Event Data Recorder (EDR) In the event of an airbag .
nature, such as would identify a particular driver , ve- hicle, or crash, will be treated confidentially . Confidential data will not be disclosed by DaimlerChrysler Corpora- tion to any third party except when: 1.
Child Restraint Everyone in your vehicle needs to be buckled up all the time — babies and children, too. Every state in the United States and all Canadian provinces r equire that small children ride in pr oper restraint systems. This is the law , and you can be prosecuted for ignoring it.
Infants and Small Children There ar e differ ent sizes and types of restraints for children fr om newborn size to the child almost large enough for an adult safety belt.
• The belt-positioning booster seat is for children weigh- ing more than 40 lbs (18 kg), but who ar e still too small to fit the vehicle’s seat belts properly . If the child cannot sit with knees bent over the vehicle’s seat cushion while the child’s back is against the seat back, they should use a belt-positioning-booster seat.
Here are some tips for getting the most out of your child restraint: • Before buying any r estraint system, make sure that it has a label certifying that it meets all applicable Safety Standards. W e also recommend that you make sure that you can install the child restraint in the vehicle where you will use it befor e you buy it.
• If the belt still can’t be tightened, or if pulling and pushing on the restraint loosens the belt, disconnect the latch plate from the buckle, turn the latch plate around, and insert the latch plate into the buckle again. If you still can’t make the child restraint secur e, try a differ ent seating position.
Identification dots are located above the standar d cab front seat lower anchorages as a guide for locating lower anchors. NOTE: For children riding in the fr ont seat of a Stan- dard Cab model r efer to the “Passenger Airbag On/Off Switch” located in this section.
Child restraint systems having attachments designed to connect to the lower anchorages are now available. Child restraints having tether straps and hooks for connection to the seatback tether anchorage have been available for some time.
restraint installation, instead of tucking the seat belt behind the child restraint, r oute the seat belt through the child restraint belt path and then buckle it.
rearwar d-facing infant restraints will also be equipped with a tether strap, a hook and means for adjusting the tension in the strap. In general, you will first loosen the adjusters on the lower straps and tether straps so that you can more easily attach the hook or connector to the lower anchorages and tether anchorages.
W ARNING! An incorrectly anchored tether strap could lead to seat failure and injury to the child. In a collision, the seat could come loose and allow the child to crash into the inside of the vehicle or other passengers, or even be thrown from the vehicle.
Multiple Child Restraint Installation Sequence - (Quad Cab Rear Seats) 1. Obtain tether straps by raising the head r estraints and reaching between the r ear glass and rear seat. The tether strap may be retained with an elastic band. Accessibility to the tether strap is greatly impr oved by raising the seat cushion to the “up” position.
Multiple Child Restraint Quad Cab 1 10 THINGS TO KNOW BEFORE ST ARTING YOUR VEHICLE.
T ether Anchorage Points at All Three Seating Positions (Mega Cab) 1. Place the child restraint on the seat and adjust the tether strap so that it will reach over the seat back under the head restraint to the tether anchor dir ectly behind the seat. 2.
• The lap portion should be low on the hips and as snug as possible. • Check belt fit periodically . A child’s squirming or slouching can move the belt out of position. If the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle.
CAUTION! • During the first 500 miles (805 km) your new vehicle is driven, do not tow a trailer . Doing so may damage your vehicle. • Limit your speed to 50 mph (80 km/h) during the first 500 miles (805 km) of towing.
.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors .............................. 1 2 1 ▫ Inside Mirror ........................ 1 2 1 ▫ Automatic Dimming Mirror— If Equipped . . . 122 ▫ Outside Mirrors ...................... 1 2 2 ▫ Exterior Mirrors Folding Featur e .
▫ Reclining Seats (1500 Standard And Quad Cab Models) ..... 1 5 0 ▫ Reclining Seats (2500/3500/Mega Cab Models) ........... 1 5 1 ▫ Adjustable Head Restraints .............. 1 5 1 ▫ Manual Rotary Lumbar Support Adjustment — If Equipped .....
䡵 T ilt Steering Column .................... 1 7 3 䡵 Driver Adjustable Pedals — If Equipped ...... 1 7 4 ▫ Adjustment ......................... 1 7 4 䡵 Electronic Speed Contr ol — If Equipped ...... 1 7 5 ▫ T o Activate .................
▫ Recalibrating The Compass .............. 1 8 4 ▫ Outside T emperature ................... 1 8 6 䡵 Garage Door Opener — If Equipped ......... 1 8 6 ▫ Programming HomeLink ................ 1 8 8 ▫ Canadian Programming/Gate Pr ogramming . .
▫ Front Instr ument Panel Cupholders — Manual T ransmission .................. 2 0 1 ▫ Rear Cupholder — Quad Cab — If Equipped ......................... 2 0 2 ▫ Rear Cupholder — Mega Cab ............ 2 0 2 䡵 Storage ...................
▫ Exhaust Gas ......................... 2 1 8 ▫ Safety Checks Y ou Should Make Inside The V ehicle ......................... 2 1 9 ▫ Safety Checks Y ou Should Make Outside The V ehicle .
MIRRORS Inside Mirror The mirror should be adjusted to center on the view through the r ear window . Annoying headlight glare can be r educed by moving the small control under the mirr or to the night position (toward r ear of vehicle). The mirror should be adjusted while set in the day position (toward windshield).
Automatic Dimming Mirror— If Equipped This mirror automatically adjusts for annoying headlight glare fr om vehicles behind you. Y ou can turn the feature on or off by pr essing the button at the base of the mirror . A light in the button will indicate when the dimming feature is activated.
W ARNING! V ehicles and other objects seen in a right side convex mirror will look smaller and farther away than they really are. Relying too much on your right side convex mirror could cause you to collide with an- other vehicle or other object.
Set the top switch to the left or right for the left or right mirror , and set it to the center off position to pr event accidentally moving a mirror when you ar e finished adjusting the mirror . T o adjust a mirror , select left or right with the top switch, and press one of the four arr ows for the direction you want the mirr or to move.
NOTE: Fold th e7x1 0 inch trailer towing mirrors rearward prior to entering an automated car wash. Blindspot Mirror T railer T owing Position UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 125 3.
HANDS–FREE COMMUNICA TION (UConnect™) — IF EQUIPPED UConnect™ is a voice-activated, hands-free, in- vehicle communications system. UConnect™ allows you to dial a phone number with your cellular phone using simple voice commands (e.g., ⬙ Call” ѧ “Mike” ѧ ”W ork ⬙ or ⬙ Dial” ѧ “248-555-1212 ⬙ ).
The UConnect™ system can be used with any Hands- Free Pr ofile certified Bluetooth™ cellular phone. See www .chrysler .com/uconnect for supported phones. If your cellular phone supports a differ ent profile (e.g., Headset Profile), you may not be able to use any UCon- nect™ features.
• Prior to giving a voice command, one must wait for the voice on beep, which follows the ⬙ Ready ⬙ prompt or another prompt. • For certain operations, compound commands can be used. For example, instead of saying ⬙ Setup ⬙ and then ⬙ Phone Pairing, ⬙ the following compound command can be said: ⬙ Setup Phone Pairing.
Pair (Link) UConnect™ System to a Cellular Phone T o begin using your UConnect™ system, you must pair your compatible Bluetooth™ enabled cellular phone. NOTE: The UConnect™ system use requir es a cellular phone equipped with the Bluetooth ⬙ Hands-Free Pr ofile, ⬙ version 0.
• Y ou will then be asked to give your cellular phone a priority level between 1 and 7, 1 being the highest priority . Y ou can pair up to seven cellular phones to your UConnect™ system. However , at any given time, only one cellular phone can be in use, connected to your UConnect™ System.
you can say ⬙ John Doe, ⬙ where John Doe is a pr evi- ously stored name entry in the UConnect™ phone- book. Refer to ⬙ Add Names to Y our UConnect™ Phonebook, ⬙ to learn how to store a name in the phonebook.
four associated phone numbers and designations. Each language has a separate 32-name phonebook accessible only in that language. Edit Entries in the UConnect™ Phonebook NOTE: Editing phonebook entries is recommended when vehicle is not in motion. • Press the ’Phone’ button to begin.
• After you enter the Phonebook Delete menu, you will then be asked for the name of the entry that you wish to delete. Y ou can either say the name of a phonebook entry that you wish to delete or you can say ⬙ List Names ⬙ to hear a list of the entries in the phonebook from which you choose.
• T o call one of the names in the list, press the ⬙ V oice Recognition’ button during the playing of the desired name, and then say ⬙ Call. ⬙ NOTE: the user can also exercise ⬙ Edit ⬙ or ⬙ Delete ⬙ operations at this point. • The UConnect™ system will then prompt you as to number designation you wish to call.
Making a Second Call while Current Call in Progress T o make a second call while you are curr ently in a call, press the ’V oice Recognition’ button and say ⬙ Dial ⬙ or ⬙ Call ⬙ followed by the phone number or phonebook entry you wish to call.
Call T ermination T o end a call in progr ess, momentarily press the ⬘ Phone’ button. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call. Redial • Press the ’Phone’ button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Redial.
• After the ⬙ Ready ⬙ prompt and the following beep, say the name of the language you wish to switch to (English, Espanol, or Francais, if so equipped). • Continue to follow the system prompts to complete language selection. After selecting one of the languages, all prompts and voice commands will be in that language.
Y our phone must be turned on and paired to the UCon- nect™ system to allow use of this vehicle feature in emergency situations when the cell phone has network coverage and stays paired to the UConnect™ system. T owing Assistance If you need towing assistance, • Press the ’Phone’ button to begin.
When calling a number with your UConnect™ system that normally requir es you to enter in a touch-tone sequence on your cellular phone keypad, you can push the ’V oice Recognition’ button and say the sequence you wish to enter followed by the word ⬙ Send.
Dialing Using the Cellular Phone Keypad Y ou can dial a phone number with your cellular phone keypad and still use the UConnect™ system (while dialing via the cell phone keypad, the user must exercise caution and take precautionary safety measur es).
Information Service When using A T&T W ireless Service, dialing to phone number ⬙ #121, ⬙ you can access voice activated automated system to receive news, weather , stocks, traffic, etc.
Select another Cellular Phone This feature allows you to select and start using another phone with the UConnect™ system. The phone must have been previously pair ed to the UConnect™ system that you want to use it with. • Press the ’Phone’ button to begin.
• Speak normally , without pausing, just as you would speak to a person sitting approximately eight (8) feet away from you. • Make sure that no one other than you is speaking during a voice recognition period.
Far End Audio Performance • Audio quality is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, and • dry weather condition. • Operation from driver seat.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 145 3.
146 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 147 3.
North American English Primary Alternate(s) Zero Oh Add location Add new All All of them Confirmation prompts Confirmations prompts Delete a name Delete Language Select language List names List all List paired phones List phones Pager Beeper Phone pairing Pairing Phonebook Phone book Return to main menu Return.
40-20-40 Front Seat As the name implies, the seat is divided into 3 segments. The outboard seat portions ar e each 40% of the total width of the seat. The back of the center portion (20%) easily folds down to provide an armr est/center storage compartment (if equipped).
Reclining Seats (1500 Standard and Quad Cab Models) The recliner handle is on the outside of the seat cushion. Pull up on the handle, as shown, to release the seat back and adjust for comfort. W ARNING! Y ou can be seriously , even fatally , injured riding in a seat with the seatback reclined.
Reclining Seats (2500/3500/Mega Cab Models) The recliner handle is on the outside of the seat cushion. Pull up on the handle, as shown, to release the seat back and adjust for comfort. W ARNING! Y ou can be seriously , even fatally , injured riding in a seat with the seatback reclined.
T o lower the head restraint, push in the button and then push down on the head restraint. Manual Rotary Lumbar Support Adjustment — If Equipped Rotating the lumbar control knob on the left side of the driver’s seatback and on the right side of the passenger’s seatback increases or decr eases the lumbar (lower back) support.
Power Seats (1500 Standard and Quad Cab Models) — If Equipped CAUTION! Don’t put anything under a power seat. It may cause damage to the seat controls.
The power seat controls ar e on the outboard side of the front seat cushions. One switch contr ols the seat move- ment. The six-way switch can be moved forward or back- wards to get the most comfortable position. The same switch can be moved up and down to control seat height or to change the seat angle by tilting it up or down.
Power Seat Switch Up, Down, Forward, and Rearward UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 155 3.
The power seat controls ar e on the outboard side of the front seat cushions. Thr ee switches control the seat move- ment. The four-way switch in the center can be moved forward or backwar ds to get the most comfortable posi- tion. The same switch can be moved up and down to control seat height.
Folding Rear Seat (T able Mode) — Mega Cab Models Both the left and right rear seat backs can be folded down and used as a table. T o fold either rear seat back down (T able Mode), lift the handle and fold the seat back forward. Simply lift the seat back to return the seat to the upright position.
Folding Rear Seat (Kneel Mode) — Mega Cab Models Both the left and right rear seats can be folded flat (Kneel Mode) and used for carrying cargo. Each of the r ear seat backs provide 2 D-rings and each of the r ear storage bin lids provide 2 slotted cutouts.
W ARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts.
NOTE: The rear seat will dr op and move forward in Kneel Mode. T o fold either rear seat flat (Kneel Mode), lift the handle and fold the seat forward. Simply lift the seat back to return the seat to the upright position. V erify that it is locked in place.
W ARNING! Be certain that the seatback is securely locked into position. If the seatback in not securely locked into position the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury .
level, or OFF . The High heat level operates for 30 minutes (approximate), the Low heat level operates for 30 min- utes (approximate). The seat heat will also turn OFF when the ignition is turned OFF . Both of the indicators ON identifies High heat level.
TO OPEN AND CLOSE THE HOOD T o open the hood, two latches must be released. First pull the hood release lever located below the steering wheel at the base of the instrument panel. Once the hood is released you must r each into the opening beneath the center of the grille and push up the latch to release the safety catch before raising the hood.
W ARNING! If the hood is not fully latched, it could fly up when the vehicle is moving and block your forward vision. Be sure all hood latches are latched fully before driving.
Interior Lights Courtesy and dome lights are turned on when the fr ont doors are opened, when the dimmer contr ol (rotating wheel on the right side of the switch) is rotated to the upward detent position, or if equipped, when the UN- LOCK button is pressed on the key fob.
Battery Saver T o protect the life of your vehicle’s battery , Load Shed- ding is provided for both the interior and exterior lights. If the ignition is off and any door is left ajar for 10 minutes or the dimmer control is r otated upwards for 10 minutes, the interior lights will automatically turn off.
Y our vehicle is equipped with plastic headlight lenses that are lighter and less susceptible to stone br eakage than glass headlights. Plastic is not as scratch resistant as glass and ther efore differ ent lens cleaning procedur es must be followed.
Lights-on Reminder If the headlights, parking lights, or cargo lights ar e left on, after the ignition is turned off, a chime will sound when the driver’s door is opened.
Multifunction Control Lever The multifunction control lever is located on the left side of the steering column. T urn Signals Move the lever up or down to signal a right-hand or left-hand turn.
Passing Light Y ou can signal another vehicle with your headlights by partially pulling the multifunction lever toward the steer - ing wheel. This will cause the high beam headlights to turn on until the lever is released.
WINDSHIELD WIPERS AND W ASHERS Windshield Wipers The wipers and washers are operated by a switch in the multifunction control lever . T urn the end of the handle to select the desired wiper speed.
W ARNING! Sudden loss of visibility through the windshield could lead to an accident. Y ou might not see other vehicles or other obstacles. T o avoid sudden icing of the windshield during freezing weather , warm the windshield with defroster before and during wind- shield washer use.
TIL T STEERING COLUMN T o tilt the column, pull rearwar d on the lever below the turn signal control and move the wheel up or down, as desired. Push the lever forwar d to lock the column firmly in place. W ARNING! T ilting the steering column while the vehicle is moving is dangerous.
DRIVER ADJUST ABLE PEDALS — IF EQUIPPED The power adjustable accelerator and brake pedals allow the driver to establish a comfortable position relative to the steering wheel and pedals. Adjustment 1. Position the driver seat so that you are at least 10 inches (254 mm) away from the airbag located in the center of the steering wheel.
CAUTION! Do not place any article under the adjustable pedals or impede its ability to move as it may cause damage to the pedal controls. Pedal travel may become limited if movement is stopped by an obstruction in the adjustable pedal’s path.
T o Activate Push the ON/OFF button to the ON position. In the instrument cluster , the word “CRUISE” illuminates when the system is on. T o Set At A Desired Speed When the vehicle has reached the desir ed speed, press and release the SET button. Release the accelerator and the vehicle will operate at the selected speed.
T o V ary The Speed Setting When the speed control is on, speed can be incr eased by pressing and holding the ACCEL button. When the button is released, a new set speed will be established. T apping the ACCEL button once will result in a speed increase (r efer to the table below for the speed for your specific engine).
T o Accelerate For Passing Depress the accelerator as you would normally . When the pedal is released, the vehicle will r eturn to the set speed. NOTE: When driving uphill, at elevations above 2,000 feet (610 meters), or when the vehicle is heavily loaded (especially when towing) the vehicle may slow below the SET speed.
OVERHEAD CONSOLE— IF EQUIPPED The two optional overhead consoles may consist of the following features: • Courtesy/Reading Lights • Compass/T emperature Mini-T rip Computer (CMTC) — If Equipped • Universal Garage Door Opener — If Equipped Courtesy/Reading Lights In the middle of the console are two courtesy/r eading lights.
OVERHEAD CONSOLE WITH COMP ASS/TEMPERA TURE MINI-TRIP COMPUTER — IF EQUIPPED This optional overhead console consists of the following: • Courtesy Lights • Compass/T emperature Mini-T rip Computer (CMTC) This overhead console allows you to choose between a compass/temperature display and one of four trip con- ditions being monitored.
RESET Button Use this button to reset the following displays: A verage Fuel Economy (A VG ECO) T rip Odometer (ODO) Elapsed time (ET) Global Reset If the RESET button is pressed twice within 2 seconds while in any of the 3 resettable displays (A VG ECO, ODO, ET), the Global Reset will reset all 3 displays.
A verage Fuel Economy (A VG ECO) Shows the average fuel economy since the last reset. A verage fuel economy is a running average of the amount of fuel used and the distance the vehicle has traveled. When the fuel economy is reset, the display will momen- tarily blank.
Ram fuel tank volumes are as follows: • 26 gallons - 1500 short box models • 34 gallons - 1500 Quad Cab (if equipped)/2500/3500 short box models • 35 gallons - 1500/2500/3500 long box models T rip Odometer (ODO) This display shows the distance traveled since the last reset.
W ARNING! Even if the display still reads a few degrees above 32°F ( 0°C), the road surface may be icy , particularly in woods or on bridges. Drive carefully under such conditions to prevent an accident and possible per- sonal injury or property damage.
Compass V ariance is the difference between magnetic north and geographic north. In some areas of the country , the differ ence between magnetic and geographic north is great enough to cause the compass to give false r eadings. If this occurs, the compass variance must be set according to the Compass V ariance Map.
NOTE: The default for the compass variance is zone 8. T o set the variance: T urn the ignition ON and set the display to “Compass/T emperature.” Pr ess and hold the RESET button approximately five seconds. The last vari- ance zone number will be displayed.
For additional information on HomeLink 威 , call 1–800– 355–3515, or on the internet at www .homelink.com. W ARNING! A moving garage door can cause injury to people and pets in the path of the door . People or pets could be seriously or fatally injured.
W ARNING! V ehicle exhaust contains carbon monoxide, a danger- ous gas. Do not run the vehicle’s exhaust while training the transceiver . Exhaust gas can cause seri- ous injury or death. W ARNING! Y our motorized door or gate will open and close while you are training the Universal T ransceiver .
2. Position the end of your hand-held transmitter 1-3 inches (3-8 cm) away from the HomeLink buttons while keeping the indicator light in view . 3. Simultaneously press and hold both the HomeLink button that you want to train and the hand-held trans- mitter buttons.
NOTE: T o program the r emaining two HomeLink but- tons, begin with ⬙ Programming ⬙ step two. Do not repeat step one. If the indicator light blinks rapidly for two seconds and then turns to a cons.
Similar to this Canadian law , some U.S. gate operators are designed to ⬙ time-out ⬙ in the same manner . If you live in Canada or you are having dif ficulties programming a gate operator by using.
Erasing HomeLink Buttons T o erase programming fr om the three buttons (individual buttons cannot be erased but can be ⬙ repr ogrammed ⬙ - note below), follow the step noted: • Press and hold the two outer HomeLink buttons until the indicator light begins to flash-after 20 seconds.
NOTE: Changes or modifications not expressly ap- proved by the party r esponsible for compliance could void the user’s authority to operate the equipment. HomeLink 威 is a trademark owned by Johnson Controls, Inc. POWER SUNROOF — IF EQUIPPED The power sunroof switch is located between the sun visors on the overhead console.
Open Sunroof - Express Mode Momentarily pressing the switch r earward will activate the Express Open Featur e, causing the sunroof to open automatically . During the Express Open operation, any movement of the switch will stop the sunroof and it will remain in a partial open position.
Pinch Protect Override If a known obstruction (ice, debris, etc.) pr events closing, press the switch forwar d and hold for two seconds after the reversal occurs. This allows the sunr oof to move towards the closed position. NOTE: Pinch protection is disabled while the switch is pressed.
Sunroof Maintenance Use only a non-abrasive cleaner and a soft cloth to clean the glass panel. Sunroof Fully Closed Press the switch forwar d and release to ensur e that the sunroof is fully closed.
All accessories connected to this/these outlet(s) should be removed or turned OFF when the vehicle is not in use to protect the battery against dischar ge. NOTE: If desired, all of the power outlets can be converted by your authorized dealer to provide power with the ignition switch in the ON position only .
CIGAR LIGHTER AND ASH RECEIVER The removable ash r eceiver is located in the instrument panel cup holder tray . The cigar lighter is located on the instrument panel, above and to the left of the ash receiver . As a child safety precaution, the lighter only operates with the ignition switch ON.
CUPHOLDERS Front Instrument Panel Cupholders (40–20–40 Seats) — Automatic T ransmission Y our new Ram truck is equipped with two adjustable cupholders. The cupholder is opened by pulling on the cup holder door handle, on the front surface. Each opening in the cupholder is adjustable and will hold cups and mugs of various sizes.
T o secure the cup, place the cup to be held into one of the cup wells and then push the cupholder arm toward the cup until it is held stable. Cup Holder Door Handle Cup Holders Automatic T ransmissio.
Front Instrument Panel Cupholders (Bucket Seats) — Automatic T ransmission If your new Ram truck is equipped with bucket seats there ar e three cup holders located on the fr ont of the center console.
Rear Cupholder — Quad Cab — If Equipped Quad Cab vehicles may be equipped with a rear cup- holder that consists of two cupwells for rear passenger convenience. Rear Cupholder — Mega Cab Mega Cab vehicles are equipped with r ear cupholders located in the center armrest.
STORAGE Center Storage Compartment (40–20–40 Seat) — If Equipped The center portion of the seat folds down to provide an armrest with unique storage compartments under the lid.
CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery , even when not in use (i.e. cellular phones, etc.). Eventually , if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent engine starting.
storage area into separate compartments. Lift the lower handle on the front of the armr est, and raise the armrest for access to the lower storage bin. On Quad Cab and Mega Cab models the rear of the floor console of fers a power outlet, a tip out bin and a rear air duct (Mega Cab Only).
Storage and Seats (Quad Cab Models) Located in the center of the front 40/20/40 seat cushion there is a storage compartment. Standard cab models also have storage behind the seat. The Quad Cab models provide additional storage under the rear seat. Lift the seat to access the storage compart- ment.
Storage and Seats (Mega Cab Models) The Mega Cab models provide additional storage behind the rear seat. T o gain access to the Mega Cab rear storage, fold the r ear seats to the “kneel position”. (See page 158 for more information.) Push down on the front of the storage compartment handle and lift the storage compartment cover .
The rear storage compartment can be divided into thr ee separate compartments by using the divider doors inside the storage compartment. Plastic Grocery Bag Retainers (Mega Cab Models) Retainer hooks which will hold plastic grocery bag handles are built into the back panel of the cab, behind the rear seat.
REAR WINDOW FEA TURES Electric Rear Window Defroster and Heated Side view Mirrors — If Equipped The Electric Rear W indow Defroster and Heated side view mirrors ar e activated by pressing the heated grid button, located on the Climate Control panel, with the ignition On.
Sliding Rear Window—If Equipped A locking device in the center of the window helps to prevent entry fr om the rear of the vehicle. Squeeze the lock to release the window . FOLD FLA T LOAD FLOOR — IF EQUIPPED Quad Cab models with a 60/40 rear seat, may be equipped with a folding load floor .
W ARNING! Do not operate the vehicle with loose items stored on the load floor . While driving or in an accident you may experience, abrupt stopping, rapid acceleration, or sharp turns. Loose objects stored on the load floor may move around with force and strike occupants, resulting in serious or fatal injury .
2. Grasp the knob on the load floor and lift the knob until the load floor unfolds into position. 3. Reverse the pr ocedure to store the load floor . Positioning the Load Floor for Storage Access Under the Seat 1. Lift the 60/40 seat cushion(s) to the upwar d position.
4. Reverse the pr ocedure to put the load floor back in the secured down position befor e you operate the vehicle. PICKUP BOX The pickup box on your new Ram has many features designed for utility and convenience.
Y ou can carry wide building materials (sheets of ply- wood, etc.) by building a raised load floor . Place lumber across the box in the indentations pr ovided above the wheel housings and in the bulkhead dividers to form the floor .
There ar e stampings in the sheet metal on the inner side bulkheads of the box in front of and behind both wheel housings. Place wooden boards acr oss the box from side to side to create separate load compartments in the pickup box.
NOTE: Dual rear wheel pickup models r equire pr operly spaced rear clearance lights. If such a vehicle is operated without a tailgate, suitable lights must be installed.
W ARNING! T o avoid inhaling carbon monoxide, which is deadly , the exhaust system on vehicles equipped with “Cap or Slide-In Campers” should extend beyond the overhanging camper compartment and be free of leaks. SAFETY TIPS T ransporting Passengers This vehicle is designed to carry passengers in the cab only .
Exhaust Gas W ARNING! Exhaust gases contain carbon monoxide, a poten- tially toxic gas that by itself is colorless and odorless. T o avoid inhaling these gases, the following precau- tions should be observed: • Do not run the engine in a closed garage or in confined areas any longer than needed to move your vehicle in or out of the area.
Safety Checks Y ou Should Make Inside The V ehicle Heater Defroster Ducts Inspect the heater defroster ducts for pr oper operation. Check for proper air flow thr ough all defroster ducts.
Lights Check the operation of all exterior lights. Check turn signal and high beam indicator lights on the instrument panel. Door Latches Check for positive closing, latching and locking. Fluid Leaks Check area under vehicle after overnight parking for fuel, water , oil, or other fluid leaks.
UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instruments And Contr ols ................. 2 2 5 䡵 Instrument Cluster ...................... 2 2 6 䡵 Instrument Cluster Description ............. 2 2 7 䡵 Electronic Digital Clock ..............
▫ Operating Instructions - Satellite Radio — If Equipped ........................... 2 4 6 䡵 Sales Code RAQ – AM/FM/CD (6-Disc) Radio W ith Optional Satellite Radio, Hands Free Phone, And V ehicle Entertainment Systems (VES) Capabilities .....
▫ Operation Instructions - (CD Mode For CD Audio Play) ........... 2 6 6 ▫ Load/Eject Button (CD Mode For CD Audio Play) ........... 2 6 7 ▫ Notes On Playing MP3 Files ............. 2 6 9 ▫ Operation Instructions - (CD Mode For MP3 And WMA Audio Play) .
▫ Satellite Antenna ...................... 2 7 9 ▫ Reception Quality ..................... 2 7 9 䡵 Remote Sound System Controls — If Equipped . . 280 ▫ Radio Operation ...................... 2 8 0 ▫ T ape Player ......................... 2 8 1 ▫ CD Player .
INSTRUMENTS AND CONTROLS UNDERST ANDING YOUR INSTRUMENT P ANEL 225 4.
INSTRUMENT CLUSTER 226 UNDERST ANDING YOUR INSTRUMENT P ANEL.
INSTRUMENT CLUSTER DESCRIPTION 1. Check Gages This light illuminates when the V oltmeter , Engine Oil Pressur e or Engine Coolant T emperature gages indicate a reading either too high or too low . Examine the gages carefully , and follow the instructions above for each indicated problem.
CAUTION! Do not operate the engine with the tachometer pointer at high rpm for extended periods. Engine damage may occur . 5. Airbag Indicator Light The indicator lights and remains lit for 6 to 8 seconds when the ignition is first turned on.
NOTE: If the gauge pointer moves to either extreme of the gauge, the “Check Gages” indicator will illuminate and a single chime will sound. 10. T ransfer Case Position (See page 316 for more information.) 11 . TOW HAUL The TOW HAUL button is located at the end of the gear shift lever .
CAUTION! Do not leave your vehicle unattended with the engine running as you would not be able to react to the temperature indicator if the engine overheats. NOTE: Engine idle speed will automatically increase to 1000 rpm at elevated coolant temperatures to impr ove engine cooling.
NOTE: The odometer/trip odometer V acuum Fluores- cent Display may also display GASCAP , which indicates that your gas cap is possibly loose or damaged. The V acuum Fluorescent Display will also display NO- FUSE, which indicates that the IOD fuse is removed fr om the Integrated Power Module.
CAUTION! Prolonged driving with the MIL on could cause damage to the engine control system. It also could affect fuel economy and driveability . If the MIL is flashing, severe catalytic converter damage and power loss will soon occur . Immediate service is required.
that the anti-lock portion of the brake system is not functioning and that service is requir ed. See your autho- rized dealer immediately . The ABS light could also illuminate during loss of traction and remain illuminated until the brake pedal is pressed.
24. ESP/BAS W arning Lamp – If Equipped The lamp indicates a problem with one or mor e of the functions of ESP . The yellow “ESP/BAS W arning Lamp” in the instrument cluster comes on when the ignition switch is turned to the “ON” position as a bulb check.
TCS Indicator Light” becomes illuminated when the ESP-Off button has been pr essed or ESP is only partially available. 27. T ransmission Oil T emperature W arning Light (Automatic T ransmissions Only) This light indicates that there is excessive trans- mission fluid temperature that might occur with severe usage such as trailer towing.
31. Door Ajar The door ajar light will illuminate when any door is opened. When the ignition is ON the door ajar light will stay illuminated until the open door is closed. When the ignition is OFF the door ajar light will stay illuminated until the open door is closed or the battery saver feature automatically turns the light off.
RADIO GENERAL INFORMA TION Radio Broadcast Signals Y our new radio will provide excellent r eception under most operating conditions. Like any system, however , car radios have performance limitations, due to mobile op- eration and natural phenomena, which might lead you to believe your sound system is malfunctioning.
NOTE: The radio, steering wheel radio controls (if equipped), and 6 disc CD/DVD changer (if equipped) will remain active for up to 10 minutes after the ignition switch has been turned off.
Power Switch/V olume Control (Rotary) Press the ON/VOL contr ol to turn the radio ON. Press the ON/VOL a second time to turn OFF the radio. Electronic V olume Control The electronic volume contr ol turns continuously (360 degrees) in either dir ection without stopping.
SCAN Button (Radio Mode) Pressing the SCAN button causes the tuner to sear ch for the next listenable station in either , AM, FM, or Satellite (if equipped) frequencies, pausing for 5 seconds at each listenable station before continuing to the next. T o stop the search, pr ess SCAN a second time.
AM/FM Button (Radio Mode) Press the button to select AM or FM Modes. Setting the T one, Balance, and Fade Press the r otary TUNE control and BASS will display . T urn the TUNE control to the right or left to incr ease or decrease the Bass tones. Press the r otary TUNE control a second time and MID will display .
Y ou may add a second station to each push-button by repeating the above pr ocedure with this exception: Pr ess the SET button twice and SET 2 will show in the display window .
• If you insert a disc with the ignition ON and the radio OFF , the CD will automatically be pulled into the CD Player . • This radio does not play discs with MP3 tracks. SEEK Button (CD Mode) Press the right side of the SEEK button for the next track on the CD.
RND/SET Button (Random Play Button) (CD Mode) Press this button while the CD is playing to activate Random Play . This feature plays the selections on the compact disc in random order to pr ovide an interesting change of pace. Press the SEEK button to move to the next randomly selected track.
MUTE Button (Auxiliary Mode) Press the MUTE button to cancel the sound fr om the speakers. ⬙ MUTE ⬙ will display . Press the MUTE button a second time and the sound from the speakers will r eturn. Rotating the volume control or turning OFF the ignition will also return the sound fr om the speakers.
Operating Instructions - Satellite Radio — If Equipped Refer to the “Satellite Radio” section of the Owner’s Manual. SALES CODE RAQ – AM/FM/CD (6-DISC) RADIO WITH OPTIONAL SA TELLITE RADIO, .
Power Switch/V olume Control (Rotary) Press the ON/VOL contr ol to turn the radio ON. Press the ON/VOL a second time to turn OFF the radio. Electronic V olume Control The electronic volume contr ol turns continuously (360 degrees) in either dir ection without stopping.
SCAN Button (Radio Mode) Pressing the SCAN button causes the tuner to sear ch for the next listenable station, in either AM, FM or Satellite (if equipped) frequencies, pausing for 5 seconds at each listenable station before continuing to the next. T o stop the search, pr ess SCAN a second time.
AM/FM Button (Radio Mode) Press the button to select AM or FM Modes. Setting the T one, Balance, and Fade Press the r otary TUNE control and BASS will display . T urn the TUNE control to the right or left to incr ease or decrease the Bass tones. Press the r otary TUNE control a second time and MID will display .
T oggle the PTY button to select the following format types: Program T ype 16 Digit-Character Dis- play No program type or un- defined None Adult Hits Adult_Hits Alert Alert Alert Alert Classical Clas.
By pressing the SEEK button when the PTY icon is displayed, the radio will be tuned to the next frequency station with the same selected PTY name. The PTY function only operates when in the FM mode. If a preset button is activated while in the PTY (Program T ype) mode, the PTY mode will be exited and the radio will tune to the preset station.
Operation Instructions - (CD MODE for CD Audio Play) NOTE: The ignition switch must be in the ON or ACC position to operate the radio. NOTE: Note: This Radio is capable of playing compact discs (CD), .
SEEK Button (CD MODE for CD Audio Play) Press the right side of the SEEK button for the next selection on the CD. Press the left side of the button to return to the beginning of the curr ent selection, or return to the beginning of the previous selection if the CD is within the first 10 seconds of the current selection.
Radio display will show ⬙ EJECTING DISC ⬙ when the disc is being ejected and prompt the user to r emove the disc. Press and hold the LOAD/ EJT button for 5 seconds and all CDs will be ejected from the radio. If you have ejected a disc and have not removed it within 15 seconds, it will be reloaded.
RND/PTY Button (Random Play Button) (CD MODE for CD Audio Play) Press this button while the CD is playing to activate Random Play . This feature plays the selections on the compact disc in random order to pr ovide an interesting change of pace. Press the SEEK button to move to the next randomly selected track.
The radio uses the following limits for file systems: • Maximum number of directory levels: 15 • Maximum number of files: 255 • Maximum number of folders: 100 • Maximum number of characters in file/folder names: • Level 1: 12 (including a separator ⬙ .
MPEG Specifi- cation Sampling Fre- quency (kHz) Bit rate (kbps) MPEG-1 Audio Layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 1 12, 96, 80, 64, 56, 48, 40, 32 MPEG-2 Audio Layer 3 24, 22.
Operation Instructions - (CD Mode for MP3 Audio Play) SEEK Button (CD Mode for MP3 Play) Pressing the right side of the SEEK button plays the next MP3 File. Pressing the left side of the SEEK button plays the beginning of the MP3 file. Pressing the button within the first ten seconds plays the previous file.
MSG or INFO Button (CD Mode for MP3 Play) Press and MSG or INFO button while playing MP3 disc. The radio scrolls thr ough the following T AG information: Song T itle, Artist, File Name, and Folder Name (if avail- able). Press the MSG or INFO button once mor e to return to ⬙ elapsed time ⬙ priority mode.
Operating Instructions - Satellite Radio Mode (If Equipped) Refer to the Satellite Radio section of the Owner’s Manual. Operating Instructions - V ideo Entertainment System (VES 威 ) (If Equipped) Refer to separate V ideo Entertainment System (VES 威 ) Guide.
Power Switch/V olume Control (Rotary) Press the ON/VOL contr ol to turn the radio ON. Press the ON/VOL a second time to turn OFF the radio. Electronic V olume Control The electronic volume contr ol turns continuously (360 degrees) in either dir ection without stopping.
Clock Setting Procedure 1. Pr ess and hold the time button until the hours blink. 2. Adjust the hours by turning the right side T une/ Audio control. 3. After the hours ar e adjusted, press the right side T une/Audio control to set the minutes. The minutes will begin to blink.
Press the r otary TUNE control a thir d time and TREBLE will display . T urn the TUNE control to the right or left to increase or decr ease the T reble tones. Press the r otary TUNE control a fourth time and BAL will display . T urn the TUNE control to the right or left to adjust the sound level from the right or left side speakers.
Country Country Oldies Oldies Soft Soft Nostalgia Nostalgia Jazz Jazz Classical Classical Rhythm and Blues Rhythm_and_Blues Soft Rhythm and Blues Soft_R_&_B Foreign Language Foreign_Language Relig.
Operating Instructions — T ape Player Insert the cassette with the exposed tape side toward the left and the mechanical action of the player will gently pull the cassette into the play position. NOTE: When subjected to extremely cold temperatur es, the tape mechanism may requir e a few minutes to warm up for proper operation.
Scan Button Press this button to play 10 seconds of each selection. Press the scan button a second time to cancel the featur e. Changing T ape Direction If you wish to change the direction of tape travel (side being played), press Pr eset 6. The lighted arrow in the display window will show the new direction.
compact discs (CD-R W) compact discs with MP3 tracks and multisession compact discs with CD and MP3 tracks and WMA. Inserting Compact Disc(s) CAUTION! This CD player will accept 4 3/4 inch (12 cm) discs only . The use of other sized discs may damage the CD player mechanism.
Radio display will show ⬙ LOADING DISC ⬙ when the disc is loading and “READING DISC” when the radio is reading the disc. LOAD/EJT - Eject Press the LOAD/EJT button and the push- button with the corresponding number wher e the CD was loaded and the disc will unload and move to the entrance for easy removal.
RND/PTY Button (Random Play Button) (CD MODE for CD Audio Play) Press this button while the CD is playing to activate Random Play . This feature plays the selections on the compact disc in random order to pr ovide an interesting change of pace. NOTE: MP3 and WMA Random Play are for file folders only .
The radio uses the following limits for file systems: • Maximum number of directory levels: 15 • Maximum number of files: 255 • Maximum number of folders: 100 • Maximum number of characters in file/folder names: • Level 1: 12 (including a separator ⬙ .
MPEG Specifi- cation Sampling Fre- quency (kHz) Bit rate (kbps) MPEG-1 Audio Layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 1 12, 96, 80, 64, 56, 48, 40, 32 MPEG-2 Audio Layer 3 24, 22.
Operation Instructions - (CD Mode for MP3 and WMA Audio Play) SEEK Button (CD Mode for MP3 and WMA Play) Pressing the right side of the SEEK button plays the next file. Pressing the left side of the SEEK button plays the beginning of the file. Pressing the button within the first ten seconds plays the previous file.
INFO Button (CD Mode for MP3 Play) Press and INFO button while playing MP3 or WMA disc. The radio scrolls thr ough the following T AG information: Song T itle, Artist, File Name, and Folder Name (if avail- able). Press the INFO button once mor e to return to ⬙ elapsed time ⬙ priority mode.
Operating Instructions - Satellite Radio Mode (If Equipped) Refer to the “Satellite Radio” section of the Owner’s Manual. Operating Instructions - V ideo Entertainment System (VES) (If Equipped) Refer to separate “V ideo Entertainment System (VES) Guide.
menus and instructions for selecting a variety of destina- tions and routes, AM/FM stereo radio and six-disc CD changer with MP3 capability . Mapping information for navigation is supplied on a DVD that is loaded into the unit. One map DVD covers all of North America.
System Activation NOTE: Y our vehicle’s radio must be on and in satellite mode when the activation process takes place. T o activate your Sirius Satellite Radio service, call the toll-free number 888-539-7474, or visit the Sirius web site at www .sirius.
ESN/SID Access W ith RAQ and RAK Radios W ith the ignition switch in the ACCESSOR Y position and the radio OFF , press the CD Eject and TIME buttons simultaneously for 3 seconds.
Selecting a Channel Press and r elease the SEEK or TUNE knob to search for the next channel. Press the top of the button to sear ch up and the bottom of the button to search down. Holding the TUNE button causes the radio to bypass channels until the button is released.
one and stop the search. Pr essing a pre-set memory button during a music type scan, will call up the memory channel and stop the search. PTY Button ⴖ SEEK ⴖ When the desired pr ogram is obtained, press the ⬙ SEEK ⬙ button within five seconds.
REMOTE SOUND SYSTEM CONTROLS — IF EQUIPPED The remote sound system contr ols are located on the r ear surface of the steering wheel. Reach behind the wheel to access the switches. The right hand control is a r ocker type switch with a button in the center .
T ape Player Pressing the top of the switch once will go to the next selection on the cassette. Pressing the bottom of the switch once will go to the beginning of the current selection or to the beginning of the previous selection if it is within the first 5 seconds of the current selection.
5. A loose tape should be corrected befor e use. T o rewind a loose tape, insert the eraser end of a pencil into the tape drive gear and twist the pencil in the requir ed directions. Maintain your cassette tape player . The head and capstan shaft in the cassette player can pick up dirt or tape deposits each time a cassette is played.
NOTE: If you experience difficulty in playing a particu- lar disc, it may be damaged, oversized, or have theft protection encoding. T ry a known good disc befor e considering disc player service.
Heater Only — If Equipped The mode control (at the right of the control panel) can be set in any of the following positions: NOTE: T o improve your selection choices, the system allows you to operate at intermediate positions between the major modes.
Bi-Level Outside air flows through the outlets located in the instrument panel and at the floor . Mix Outside air flows in equal proportions thr ough the floor and defroster outlets.
Air Conditioning and Heating — If Equipped Air Conditioning Operation T o turn on the Air Conditioning, set the fan control at any speed and pr ess the snowflake button located at the right of the control panel. Conditioned air will be directed thr ough the outlets selected by the mode control.
Recirculation Modes (Panel or Bi-Level) Select the recir culation modes when the outside air contains smoke, odors, high humidity , or if rapid cooling is desired.
Blower Control The rotary knob on the left of the control panel is the blower contr ol. T urn the knob clockwise to one of the four positions to obtain the blower speed you desire.
Air Conditioning with Dual Zone T emperature Control — If Equipped W ith the Dual Zone T emperature Contr ol System, each front seat occupant can independently contr ol the tem- perature of air coming fr om the outlets on their side of the vehicle.
Recirculation Pushbutton Pushing the Recirculation button al- lows interior air to recir culate continu- ously in any position except defrost and defrost/floor mode for rapid cool down of the interior . See “Fast Cooldown” later in this section. Mode Control The mode control allows you to choose from several patterns of air distribution.
Mix Outside air flows in equal proportions thr ough the floor and defroster outlets. Defrost Outside air is primarily directed to the windshield through the defr oster outlets located at the base of the windshield and side window demist outlets.
Dual Zone T emperature Control Use this control to r egulate the temperature of the air inside the passenger compartment. This is accomplished by having separate temperature contr ol slides for both the driver and front passenger . The blue area of the scale indicates cooler temperatures while the r ed area indicates warmer temperatures.
conditioning system has been on. It is not an indication of a problem with the air conditioning system. Rear Air Duct—Mega Cab Only The rear seat will r eceive air flow in all modes except for Defrost. The rear air duct is designed to be pointed up when in A/C mode, and pointed down in Heat mode.
W indow Fogging W indows will fog on the inside when the humidity inside the vehicle is high. This often occurs in mild or cool temperatures when it’s rainy or humid. In most cases turning on the Air-conditioning (pr essing the snowflake button) will clear the fog.
NOTE: On models equipped with Diesel engines, the idle speed will automatically increase to 1000 rpm at elevated coolant temperatures to impr ove engine cooling.
Operating Tips Chart 296 UNDERST ANDING YOUR INSTRUMENT P ANEL.
ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es – Gas Engines ........... 3 0 2 ▫ Manual T ransmission .................. 3 0 2 ▫ Automatic T ransmission ................ 3 0 2 ▫ Normal Starting ...................... 3 0 3 ▫ If Engine Fails T o Start .
▫ Shifting Procedur e - Manually Shifted T ransfer Case .............................. 3 1 9 ▫ T ransfer Case Reminder Light ............ 3 2 0 ▫ Electronically Shifted T ransfer Case Operating Information/Precautions (5 Position Switch)— If Equipped .
▫ TCS (T raction Control System) – If Equipped W ith ESP .................. 3 4 5 ▫ BAS (Brake Assist System) ............... 3 4 6 ▫ Hsa (Hill Start Assist) .................. 3 4 7 ▫ ERM (Electronic Roll Mitigation) .......... 3 5 1 ▫ ESP (Electr onic Stability Program) .
䡵 T ire Rotation Recommendations ............ 3 7 7 ▫ Dual Rear Wheels ..................... 3 7 9 䡵 Fuel Requirements ...................... 3 8 0 ▫ Reformulated Gasoline ................. 3 8 1 ▫ Gasoline/Oxygenate Blends .............. 3 8 1 ▫ MMT In Gasoline .
▫ T railer T owing W eights (Maximum T railer W eight Ratings) ......... 3 9 7 ▫ T railer And T ongue W eight .............. 3 9 7 ▫ T owing Requirements .................. 3 9 8 ▫ T owing T ips ......................... 4 0 2 ▫ T railer T owing Mirrors — If Equipped .
ST ARTING PROCEDURES – GAS ENGINES The starter should not be operated for more than 15- second intervals. W aiting a few seconds between such intervals will protect the starter fr om overheating. W ARNING! Be sure to turn off the engine if you want to rest or sleep in your car .
Normal Starting Normal starting of either a warm or cold engine is obtained without pumping or depressing the accelerator pedal. T urn the key to the ST AR T position and release when the engine starts. If the engine fails to start within 10 seconds, turn the key to the OFF position, wait 5 seconds, then repeat the starting pr ocedure.
CAUTION! T o prevent damage to the starter , do not crank the engine for more than 15 seconds at a time. W ait 10 to 15 seconds before trying again. W ARNING! Never pour fuel or other flammable liquids into the throttle body air inlet opening in an attempt to start the vehicle.
If the engine has been flooded, it may start to run, but not have enough power to continue running when the key is released. If this occurs, continue cranking with the accel- erator pedal pushed all the way to the floor . Release the accelerator pedal and the key once the engine is running smoothly .
ENGINE BLOCK HEA TER — IF EQUIPPED The engine block heater warms engine coolant and permits quicker starts in cold weather . Connect the cord to a standard 1 10-1 15 volt AC electrical outlet with a grounded, thr ee-wire extension cor d. The engine block heater cord is r outed under the hood on the driver side of the vehicle.
W ARNING! It is dangerous to shift the selector lever out of “P” or “N” if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in re- verse. Y ou could lose control of the vehicle and hit someone or something.
W ARNING! Never use Park position on an automatic transmis- sion as a substitute for the parking brake. Always apply parking brake fully when parked to guard against vehicle movement and possible injury or damage. W ARNING! Y our vehicle could move and injure you and others if it is not completely in P (Park).
“N” Neutral Shift to Neutral when the vehicle is standing for pro- longed periods with the engine running. The engine may be started in this range. Set the parking brake if you must leave the vehicle. NOTE: T owing the vehicle, coasting, or driving, with the transmission in neutral (N) position, can cause severe damage to the transmission.
• vehicle speed is above approximately 30 mph (48 km/h); • the “TOW HAUL O/D OFF” switch has not been activated; • transmission has reached normal operating tempera- ture.
When T o Use “TOW HAUL” and “O/D OFF” Modes When driving in hilly areas, towing a trailer , carrying a heavy load, etc., and frequent transmission shifting oc- curs, press the “T OW HAUL O/D OFF” button once to select TOW HAUL.
T orque Converter Clutch A featur e, designed to improve fuel economy , has been included in the automatic transmission on your vehicle. A clutch within the torque converter engages automati- cally at calibrated speeds. This may result in a slightly differ ent feeling or response during normal operation in the upper gears.
T ruck models with manual transmission are equipped with a clutch interlocking ignition system. The clutch pedal must be fully depressed to start the vehicle. Fully depress the clutch pedal befor e shifting gears. As you release the clutch pedal, lightly depr ess the accelera- tor pedal.
T o shift into Reverse, come to a complete stop. Depress the clutch and pause briefly to allow the gear train to stop. Reverse has a “crash-through” lockout featur e. Move the shift lever from the Neutral position straight across, in one swift motion, and down into Reverse.
Y ou should use first gear when starting from a standing position. Damage to the clutch can result fr om starting in 2nd or 3rd gear . Use each gear in numerical order – do not skip a gear . T o shift into Reverse, come to a complete stop. Depress the clutch and pause briefly to allow the gear train to stop.
CAUTION! When descending a hill, be very careful to downshift one gear at a time to prevent overspeeding the engine which can cause valve damage. T o prevent clutch and transmission damage, your vehicle should be downshifted at speeds no greater than those listed in the Maximum Recommended Downshifting Speed chart.
Manually Shifted T ransfer Case Operating Information/Precautions The transfer case provides 4 mode position s-2( r ear)- wheel-drive high range, 4-wheel-drive high range, neu- tral, and 4-wheel-drive low range.
NOTE: Do not attempt to make a shift while only the front or r ear wheels are spinning. The transfer case is not equipped with a synchronizer and ther efore the fr ont and rear driveshaft speeds must be equal for the shift to take place. Shifting while only the front or r ear wheels are spinning can cause damage to the transfer case.
4H 4-Wheel-Drive High Range - Locks the front and r ear driveshafts together . Forces the fr ont and rear wheels to rotate at the same speed. Additional traction for loose, slippery road surfaces only . N Neutral - Disengages both the front and r ear driveshafts from the powertrain.
vehicle in motion, the transfer case will engage / disen- gage faster if you momentarily release the accelerator pedal after completing the shift. Apply a constant for ce when shifting the transfer case lever .
Electronically Shifted T ransfer Case Operating Information/Precautions (5 Position Switch)—If Equipped This is an electric shift transfer case and is operated by the 4WD Control Switch (T ransfer Case Switch), which is located on the instrument panel.
When additional traction is requir ed, the transfer case 4WD HI and 4WD LO positions can be used to lock the front and r ear driveshafts together and force the fr ont and rear wheels to r otate at the same speed.
NOTE: The transfer case Neutral (N) position is selected by depressing the r ecessed button located on the lower left hand corner of the 4WD Control Switch. The transfer case Neutral (N) position is to be used for recr eational towing only . See the Recreational T owing section for specific procedur es on shifting into and out of Neutral (N).
The “SER VICE 4WD” warning light monitors the electric shift 4WD system. If this light remains on after engine start up or illuminates during driving, it means that the 4WD system is not functioning properly and that service is requir ed.
W ARNING! Y ou or others could be injured if you leave the vehicle unattended with the transfer case in the Neutral (N) position without first fully engaging the parking brake.
4WD LO 4 Wheel Drive Low Range - Low speed 4 wheel drive. Locks the front and r ear driveshafts together . Forces the front and r ear wheels to rotate at the same speed. Additional traction and maximum pulling power for loose, slippery road surfaces only .
light will continue to flash until all the requir ements for the selected position have been met. T o retry a shift: return the contr ol knob back to the original position, make certain all shift requir ements have been met, wait five (5) seconds and try the shift again.
3. While still r olling, rotate the transfer case control switch to the desired position. 4. After the desir ed position indicator light is ON (not flashing), shift transmission back into gear (release clutch on manual transmissions). Alternate Procedure 1.
Electronically Shifted T ransfer Case Operating Information/Precautions (4 Position Switch)—If Equipped This is an electric shift transfer case and is operated by the 4WD Control Switch (T ransfer Case Switch), which is located on the instrument panel.
in the 4HI and 4LO positions on dry hard surfaced r oads may cause increased tir e wear and damage to the drive- line components. NOTE: The transfer case Neutral (N) position is selected by depressing the r ecessed button located on the lower left hand corner of the 4WD Control Switch.
If One or More Shift Conditions are not Met 1. The indicator light for the curr ent position will remain ON. 2. The newly selected position indicator light will con- tinue to flash.
When operating your vehicle in 4LO, the engine speed is approximately thr ee times that of the 2WD or 4HI positions at a given road speed. T ake care not to over- speed the engine and do not exceed 25 mph (40 km/h). Proper operation of 4 wheel drive vehicles depends on tires of equal size, type and cir cumference on each wheel.
4HI 4 Wheel Drive High Range - Locks the front and r ear driveshafts together . Forces the fr ont and rear wheels to rotate at the same speed. Additional traction for loose, slippery road surfaces only . 4LO 4 Wheel Drive Low Range - Low speed 4 wheel drive.
light will continue to flash until all the requir ements for the selected position have been met. T o retry a shift: return the contr ol knob back to the original position, make certain all shift requir ements have been met, wait five (5) seconds and try the shift again.
Shifting can be performed with the vehicle rolling 2 to 3 mph (3 to 5 km/h) or completely stopped. USE EITHER OF THE FOLLOWING PROCEDURES: Preferred Procedure 1. W ith engine RUNNING, slow vehicle to 2 to 3 mph (3 to 5 km/h). 2. Shift the transmission into NEUTRAL (depress clutch on manual transmissions).
NOTE: If your are leaving your vehicle stor ed for longer than 21 days, refer to the section on “V ehicle Storage.” LIMITED-SLIP DIFFERENTIAL — IF EQUIPPED The limited-slip differ ential provide.
DRIVING ON SLIPPER Y SURF ACES When driving on wet or slushy roads, it is possible for a wedge of water to build up between the tire and r oad surface. This is known as hydroplaning and may cause partial or complete loss of vehicle control and stopping ability .
NOTE: After off-r oad usage, particularly in sand or mud, inspect the underside of the vehicle for accumu- lated dirt at the propeller shaft, axles, U-joints, brake rotors and calipers. Use a hose to clean off any accumulation of dirt or mud. Check the exhaust system and all exposed components for any sign of damage.
Be sure the parking brake is firmly set when parked and the gear shift lever is in the P ARK position. When parking on a hill you should apply the parking brake before placing the gear shift lever in P ARK, otherwise the load on the transmission locking mechanism may make it difficult to move the selector out of P ARK.
When parking on a hill, turn the front wheels towar d the curb on a downhill grade and away from the curb on an uphill grade. The parking brake should always be applied whenever the driver is not in the vehicle.
also contribute to the noise condition. Repeated or con- tinuous noises during braking may be an indication that the brake linings are worn and in need of r eplacement. Rear Wheel Anti-Lock Brake System — RW AL The Anti-lock Brake System provides increased vehicle stability and brake performance under most braking conditions.
The system’s pump motor runs during an ABS stop to provide r egulated hydraulic pressur e. The pump motor makes a low humming noise during operation. This is normal. When you are in a sever e braking condition involving use of the Anti-lock Brake System, you will experience some pedal drop as the vehicle comes to a complete stop.
W ARNING! • Anti-lock system (ABS) cannot prevent the natu- ral laws of physics from acting on the vehicle, nor can it increase braking or steering efficiency be- yond that afforded by the condition of the vehicle brakes and tires or the traction afforded.
W ARNING! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. CAUTION! Prolong operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and should be avoided when possible.
W ARNING! • Anti-lock system (ABS) cannot prevent the natu- ral laws of physics from acting on the vehicle, nor can it increase braking or steering efficiency be- yond that afforded by the condition of the vehicle brakes and tires or the traction afforded.
BAS (Brake Assist System) The BAS is designed to optimize the vehicle’s braking capability during emergency braking maneuvers. The system detects an emergency braking situation by sens- ing the rate and amount of brake application and then applies optimum pressur e to the brakes.
W ARNING! • BAS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking efficiency beyond that af forded by the condition of the vehicle brakes and tires or the traction afforded.
W ARNING! If the clutch pedal (manual vehicles only) remains depressed during the application of the throttle, the HSA will disengage allowing the vehicle will roll down the incline.
HSA on Automatic V ehicles The system will work in reverse and all forwar d gears on vehicles equipped with an automatic transmission. The system will not activate if the vehicle is placed in neutral. HSA on Manual V ehicles The system will work in reverse, forwar d gears, and neutral on manual transmission equipped vehicles.
W ARNING! If you use a trailer brake controller with your trailer , your trailer brakes may be activated and deactivated with the brake switch. If so, when the brake pedal is released there may not be enough brake pressure to hold the vehicle and trailer on a hill and this could cause a collision with another vehicle or object behind you.
3. W ith the engine running, the brake applied, and the clutch out, rotate the steering wheel 180° counter - clockwise from center . 4. Pr ess ESP button four times within twenty seconds. The “ESP/TCS Indicator Light” should appear and dis- appear four times.
W ARNING! Many factors, such as vehicle loading, road condi- tions and driving conditions, influence the chance that wheel lift or rollover may occur . ERM can not prevent all wheel lift or rollovers, especially those that involve leaving the roadway or striking objects or other vehicles.
ESP/TCS Indicator Light The “ESP/TCS Indicator Light” located in the instrument cluster , starts to flash as soon as the tires lose traction and the ESP system becomes active.
The ESP system has multiple operating modes depend- ing on vehicle type – T wo Wheel Drive (2WD) or Four Wheel Drive (4WD). 4WD vehicles may be equipped with either a four mode position (2WD/Neutral/4HI/ 4LO) transfer case or a five mode position (2WD/Auto/ Neutral/4H/4LO) transfer case.
NOTE: T o improve the vehicle’s traction when driving with snow chains, or starting off in deep snow , sand or gravel, it may be desirable to switch to the “Partial Off” mode by pressing the ESP switch.
mph (56 km/h) the ESP system shuts of f. ESP is of f at low vehicle speeds sao that it will not interfere with of f-road driving but ESP function r eturns to provide the stability feature at speeds above 40 mph (64 km/h). The “ESP/ TCS Indicator Light” will always be illuminated when ESP is of f.
ESP or BAS system, or both. If this light r emains on after several ignition cycles, and the vehicle has been driven several miles at speeds greater than 30 mph (48 km/h), see your authorized dealer as soon as possible to have the problem diagnosed and corr ected.
TIRE SAFETY INFORMA TION Tire Markings NOTE: • P (Passenger)-Metric tir e sizing is based on U.S. design standards. P-Metric tir es have the letter “P” molded into the sidewall preceding the size designation. Ex- ample: P215/65R15 95H. • European Metric tir e sizing is based on European design standards.
T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standar ds ⴖ ....blank.... ⴖ = Passenger car tire based on Eur opean design standards LT = Light T ruck tire based on U.
EXAMPLE: Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry . H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions.
Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire; however , the date code may only be on one side. T ires with white sidewalls will have the full TIN including date code located on the white sidewall side of the tire.
Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressur e is listed on either the face of the driver’s door or the driver’s side “B” pillar .
3) the tire size designed for your vehicle 4) the cold tire inflation pr essures for the fr ont, rear and spare tir es. Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle.
passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (since 5 x 150 = 750, and 1400 – 750 = 650 lbs.) 5. Determine the combined weight of luggage and car go being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4.
ST ARTING AND OPERA TING 365 5.
W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle.
2. Economy— Improper inflation pr essures can cause uneven wear pat- terns to develop across the tir e tread. These abnormal wear patterns will reduce tr ead life resulting in a need for earlier tire r eplacement. Under inflation, also increases tir e rolling resistance and r esults in higher fuel consumption.
CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap (if equipped). This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressur es specified on the placard ar e always “cold tire inflation pr essure.
loading may be requir ed for high-speed vehicle opera- tion. Refer to original equipment or an authorized tire dealer for recommended safe operating speeds, loading and cold tire inflation pr essures. W ARNING! High speed driving with your vehicle under maxi- mum load is dangerous.
Compact Spare Tire — If Equipped The compact spare is for temporary emer gency use with radial tires. It is engineer ed to be used on your style vehicle only . Since this tire has limited tread life, the original tire should be r epaired (or r eplaced) and rein- stalled at the first opportunity .
Limited Use Spare — If Equipped The limited use spare tir e is for temporary emergency use on your vehicle. This tire is identified by a limited use spare tir e warning label located on the limited use spare tire and wheel assembly . This tire may look like the original equipped tire on the fr ont or rear axle of your vehicle, but it is not.
W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure someone.
Life of Tire The service life of a tire is dependent upon varying factors including but not limited to: • Driving style • T ire pressur e • Distance driven W ARNING! T ires and spare tire should be replaced after six years, regardless of the remaining tread.
W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of un- approved tires and wheels may change suspension dimensions and performance characteristics, resulting in changes to steering, handling, and braking of your vehicle.
Improper alignment will not cause vehicle vibration. V ibration may be a result of tire and wheel out-of- balance. Proper balancing will r educe vibration and avoid tire cupping and spotty wear .
These cautions apply to all chain traction devices, includ- ing link and cable (radial) chains. T ire chain use is permitted only on the rear tir es of Ram 4X2 trucks. NOTE: The use of class “S” chains is permitted on 1500 Ram T rucks with P245/70R17 tires only .
SNOW TIRES Snow tires should be of the same size and type constr uc- tion as the front tir es. Consult the manufacturer of the snow tire to determine any maximum vehicle speed requir ement associated with the tire. These tir es should always be operated at the vehicle maximum capacity inflation pressur es under any load condition.
Follow the recommended tir e rotation fr equency for your type of driving found in the “Maintenance Schedules” Section of this manual. More fr equent rotation is permis- sible if desired. The r easons for any rapid or unusual wear should be corrected prior to r otation being per- formed.
Dual Rear Wheels The tires used on dual wheel assemblies should be matched for wear to prevent overloading one tir e in a set. T o check if tires ar e even, lay a straight edge across all four tires. The straight edge should touch all the tir es. CAUTION! 3500 Dual Rear T ires have only one approved direc- tion of rotation.
FUEL REQUIREMENTS All engines (except 5.7L engines) are de- signed to meet all emissions regulations and provide excellent fuel economy and perfor - mance when using high quality unleaded “regular” gasoline having an octane rating of 87. The routine use of pr emium gasoline is not recommended.
Reformulated Gasoline Many areas of the country r equire the use of cleaner burning gasoline referr ed to as “Reformulated Gasoline.” Reformulated gasolines contain oxygenates, and are spe- cifically blended to reduce vehicle emissions and im- prove air quality .
life and reduce emission system performance. W e recom- mend that gasolines free of MMT be used in your vehicle. The MMT content of gasoline may not be indicated on the gasoline pump; therefor e, you should ask your gaso- line retailer whether or not his/her gasoline contains MMT .
• When pulling a heavy load or driving a fully loaded vehicle when the humidity is low and the temperature is high, use a premium unleaded fuel to help pr event spark knock. If spark knock persists, lighten the load, or engine piston damage may result.
• Guard against carbon monoxide with pr oper mainte- nance. Have the exhaust system inspected every time the vehicle is raised. Have any abnormal conditions repair ed promptly .
CAUTION! T o avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. NOTE: When the fuel nozzle “clicks” or shuts off, the fuel tank is full. W ARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank filled.
cluster . T ighten the gas cap until a “clicking” sound is heard. This is an indication that the gas cap is pr operly tightened. Press the odometer r eset button to turn the message off. If the pr oblem persists, the message will appear the next time the vehicle is started.
W ARNING! Ethanol vapors are extremely flammable and could cause serious personal injury . Never have any smok- ing materials lit in or near the vehicle when remov- ing the fuel filler tube cap (gas cap) or filling the tank. Do not use E-85 as a cleaning agent and never use it near an open flame.
Starting The characteristics of E-85 fuel make it unsuitable for use when ambient temperatures fall below 0°F . In the range of 0°F to 32°F , you may experience an increase in the time it takes for your engine to start, and a deterioration in drivability (sags and/or hesitations) until the engine is fully warmed up.
VEHICLE LOADING Certification Label As requir ed by National Highway T raffic Safety Admin- istration Regulations, your vehicle has a certification label affixed to the driver’s side door or pillar .
T ire Size The tire size on the Label r epresents the actual tir e size on your vehicle. Replacement tires must be equal to the load capacity of this tire size.
Improper weight distributions can have an adverse ef fect on the way your vehicle steers and handles and the way the brakes operate. CAUTION! Do not load your vehicle any heavier than the GVWR or the maximum front and rear GA WR. If you do, parts on your vehicle can break, or it can change the way your vehicle handles.
Gross V ehicle W eight Rating (GVWR) 6500 LBS. TRAILER TOWING In this section you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer car efully re- view this information to tow your load as efficiently and safely as possible.
Gross T railer W eight (GTW) The gross trailer weight (GTW) is the weight of the trailer plus the weight of all cargo, consumables and equipment (permanent or temporary) loaded in or on the trailer in its ⬙ loaded and ready for operation ⬙ condition.
that typically provides adjustable friction associated with the telescoping motion to dampen any unwanted trailer swaying motions while traveling. W eight-Carrying Hitch A weight-carrying hitch supports the trailer tongue weight, just as if it were luggage located at a hitch ball or some other connecting point of the truck.
Fifth-Wheel Hitch A special high platform with a coupling that mounts over the rear axle of the tow vehicle in the tr uck bed. Connects a vehicle and fifth-wheel trailer with a coupling king pin.
Gooseneck Hitch The gooseneck hitch employs a pivoted coupling arm which attaches to a ball mounted in the bed of a pickup truck. The coupling arm connects to the hitch mounted over the rear axle in the tr uck bed.
T railer T owing Weights (Maximum T railer Weight Ratings) NOTE: For additional trailer towing information (maxi- mum trailer weight ratings) refer to the following website addresses: • http:// www .dodge.com/towing . • http:// www .dodge.ca (Canada).
• The weight of any other type of cargo or equipment put in or on your vehicle. • The weight of the driver and all passengers. NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle.
W ARNING! Improper towing can lead to an injury accident. Follow these guidelines to make your trailer towing as safe as possible: Make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control.
2. GTW 3. GA WR 4. T ongue weight rating for the trailer hitch utilized (This requir ement may limit the ability to always achieve the 10% to 15% range of tongue weight as a percentage of total trailer weight). T owing Requirements — T ires − Do not attempt to tow a trailer while using a compact spare tir e.
− An electronically actuated trailer brake contr oller is requir ed when towing a trailer with electronically actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electr onic brake controller is not r equired.
NOTE: Do not cut or splice wiring into the vehicles wiring harness. The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector . Refer to the following illustrations. T owing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away fr om heavy traffic.
If using a manual transmission vehicle for trailer towing, all starts must be in FIRST gear to avoid excessive clutch slippage. T owing T ips — Automatic T ransmission The “D” range can be selected when towing. However , if frequent shifting occurs while in this range, the “T OW HAUL” or “OD/OFF” range should be selected.
T owing T ips — Cooling System T o reduce potential for engine and transmission over - heating, take the following actions: − City Driving When stopped for short periods of time, put transmission in neutral and increase engine idle speed. − Highway Driving Reduce speed.
Blindspot Mirror T railer T owing Position ST ARTING AND OPERA TING 405 5.
SNOWPLOW Snowplow Prep Packages ar e available as a factory installed option. These packages include components necessary to equip your vehicle with a snowplow . Dodge Ram 1500 Models NOTE: Do not use Dodge Ram 1500 Models for snow- plow applications.
W ARNING! Attaching a snowplow to this vehicle could ad- versely affect performance of the airbag system in an accident. Do not expect that the airbag will perform as described earlier in this manual CAUTION! The “Lamp Out” indicator could illuminate if exte- rior lamps are not properly installed.
5. Car go capacity will be reduced by the addition of options or passengers, etc. The loaded vehicle weight, including the snowplow system, all aftermarket accessories, driver , passengers, options, and cargo, must not exceed either the Gr oss V ehicle W eight (GVWR) or Gross Axle W eight (GA WR) ratings.
Methods For Removing Snow Operating Tips Under ideal snow plowing conditions, 20 mph (32 km/h) should be maximum operating speed. The operator should be familiar with the area and surface to be cleaned. Reduce speed and use extreme caution when plowing unfamiliar areas or under poor visibility .
Keep all snowplow electrical connections and battery terminals clean and free of corr osion. When plowing snow , to avoid transmission and driv- etrain damage, the following precautions should be ob- served. • Operate with transfer case in 4L when plowing small or congested areas wher e speeds are not likely to exceed 15 mph (24 km/h).
CAUTION! Internal damage to the transfer case will occur if a front or rear wheel lift is used when recreational towing. NOTE: Both the Manual Shift and Electronic Shift transfer cases must be shifted into Neutral (N) for recr eational towing. Automatic transmissions must be placed in P (Park) position for r ecreational towing.
8. Release brake pedal for five seconds and ensur e that there is no vehicle movement. 9. Repeat steps 7 and 8 with the transmission in Drive (D). 10. Shut OFF the engine and place the ignition key to the unlocked OFF position. 1 1. Shift automatic transmission into P (P ARK).
5. Shift automatic transmission to N (NEUTRAL), or depress the clutch on manual transmissions. 6. Shift transfer case lever to desir ed position. 7. Shift automatic transmission into P (Park).
CAUTION! It is necessary to follow these steps to be certain that the transfer case is fully in Neutral (N) before recreational towing to prevent damage to internal parts. 1. Bring vehicle to a complete stop. 2. Shut OFF the engine. 3. T urn the ignition key to the ON position, but do not start the engine.
15. Attach vehicle to tow vehicle with tow bar . 16. Release parking brake. NOTE: Items 1 through 5 ar e requir ements that must be met prior to depressing the Neutral (N) selection button, and must continue to be met until the 4 seconds elapses and the shift has been completed.
3. T urn the ignition key to the ON position, but do not start the engine. 4. Depr ess the brake pedal. 5. Shift automatic transmission to Neutral (N) or depr ess clutch on manual transmission. 6. Using the point of a ballpoint pen or similar object, depress the r ecessed transfer case Neutral (N) button for 1 second.
W ARNING! Y ou or others could be injured if you leave the vehicle unattended with the transfer case in the Neutral (N) position without first fully engaging the parking brake.
EQUIPMENT IDENTIFICA TION PLA TE The equipment Identification Plate is located on the hood inner surface. The following information about your vehicle is dis- played on this plate: Model, Wheelbase, V.
WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flasher .................. 4 2 0 䡵 Jacking And T ire Changing ................ 4 2 1 ▫ Jack Location ........................ 4 2 1 ▫ Reinstalling The Scissors-T ype Jack And T ools (1500 Models) .
HAZARD W ARNING FLASHER The Hazard W arning switch is mounted on the top of the steering column as shown in the illustration. T o engage the Hazard W arning lights, depress the button on the top of the steering column.
JACKING AND TIRE CHANGING W ARNING! • Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. Y ou could be crushed. Never put any part of your body under a vehicle that is on a jack. Never start or run the engine while the vehicle is on a jack.
Removal (1500 Standard Cab/Quad Cab V ehicles) The jack and jack tools are stor ed under the front passenger seat. Lift the tab and slide the plactic cover forward for access. Remove the jack and tools by removing the wing bolt and sliding the assembly from under the seat.
W ARNING! After using the jack and tools, always reinstall them in the original carrier and location. While driving you may experience, abrupt stopping, rapid accelera- tion, or sharp turns. A loose jack, tools, bracket or other objects in the vehicle may move around with force, resulting in serious injury .
3. Fold the flap and r oll the jack tool kit into a cylindrical package (in direction of arr ows), and tie to the jack using the tie straps. Folding Flap and Rolling Bag T ying Bag to Jack with Straps.
4. Place the jack and tools in the storage position holding the jack by the jack turn-screw , slip the jack and tools under seat so that the bottom slot engages into the fastener on the floor and then secure to the floor pan using the wing bolt. Reinstall the plastic cover .
JACKING INSTRUCTIONS Removing The Spare Tire Remove the spare tir e before attempting to jack the truck. Attach the wheel wrench to the jack extension tube. Insert the tube through the access hole between the lower tailgate and the top of the bumper and into the winch mechanism tube.
It is recommended that you stow the flat or spar e to avoid tangling the loose cable. NOTE: The winch mechanism is designed for use with the jack extension tube only . Use of an air wrench or other power tools is not recommended and can damage the winch.
• T urn on the Hazard W arning Flasher . • Block both the front and r ear of the wheel diagonally oppo- site the jacking position. For example, if the right front wheel is being changed, block the left rear wheel. • Passengers should not remain in the vehicle when the vehicle is being jacked.
1. Remove the spar e wheel, jack, and tools from storage. 2. Using the wheel wr ench, loosen, but do not remove, the wheel nuts by turning them counterclockwise one turn while the wheel is still on the ground.
• For 2500/3500 4x2 series trucks, when changing a front wheel, place the bottle jack under the frame rail behind the wheel. Locate the jack as far forward as possible on the straight part of the frame. • Operate the jack using the jack drive tube and the wheel wrench.
• For 2500/3500 4x4 series trucks, when changing the front wheel, assemble the jack drive tube to the jack and connect the drive tube to the extension tube. Place the jack under the axle as close to the tire as possible with the drive tubes extending to the front.
• Connect the jack tube extension and wheel wrench. Before raising the wheel off the ground, make sure that the jack will not damage surrounding truck parts and adjust the jack position as required.
W ARNING! A loose tire or jack thrown forward in a collision or hard stop could injure someone in the vehicle. Always stow the jack parts and the extra tire and wheel in the places provided. 7. Install wheel center cap and r emove wheel blocks. Do not install chrome or aluminum wheel center caps on the spare wheel.
CAUTION! Use a back and forth motion to remove the hub cap. Do not use a twisting motion when removing the hub cap, damage to the hub cap finish may occur . CAUTION! The rear hub caps on the dual rear wheel has two pry off notches. Make sure that the hook of the jack handle driver is located squarely in the cap notch before attempting to pull off.
Slots in the wheels will assist in properly orienting the inner and outer wheels. Align these slots when assem- bling the wheels for best access to the tire valve on the inner wheel. The tires of both dual wheels must be completely off the gr ound when tightening to insure wheel centering and maximum wheel clamping.
These dual rear wheels should be tightened as follows: 1. T ighten the wheel nuts in the numbered sequence to a snug fit. 2. Retighten the wheel nuts in the same sequence to the torques listed in the table. Go thr ough the sequence a second time to verify that specific torque has been achieved.
wheel. The nuts should then be tightened to recom- mended torque. T ighten the nuts to final torque in increments. Pr ogress ar ound the bolt circle, tightening the nut opposite to the nut just previously tightened until final torque is achieved. Recommended tor ques are shown in the following chart.
HOISTING A conventional floor jack may be used at the jacking locations, refer to the graphics that show jacking loca- tions. However , a floor jack or frame hoist must never be used on any other parts or the underbody . CAUTION! Never use a floor jack directly under the differential housing of a loaded truck or damage to your vehicle may result.
W ARNING! Battery fluid is a corrosive acid solution; do not allow battery fluid to contact eyes, skin or clothing. Don’t lean over battery when attaching clamps or allow the clamps to touch each other . If acid splashes in eyes or on skin, flush contaminated area immedi- ately with large quantities of water .
W ARNING! Do not permit vehicles to touch each other as this could establish a ground connection and personal injury could result. 440 WHA T TO DO IN EMERGENCIES.
5. Connect the other cable, first to the negative terminal of the booster battery and then to the engine of the vehicle with the discharged battery . Make sure you have a good contact on the engine. W ARNING! • Y ou should not try to start your vehicle by push- ing or towing.
FREEING A STUCK VEHICLE If vehicle becomes stuck in snow , sand, or mud, it can often be moved by a rocking motion. Move the gear selector rhythmically between DRIVE and REVERSE (automatic transmissions) and between 1st and RE- VERSE (manual transmissions), while applying slight pressur e to the accelerator .
W ARNING! Stand clear of vehicles when pulling with tow hooks. T ow straps and chains may break, causing serious injury . CAUTION! T ow hooks are for emergency use only , to rescue a vehicle stranded off road. Do not use tow hooks for tow truck hookup or highway towing.
NOTE: The T ransfer Case must be in the neutral posi- tion, and the transmission must be in Park (Automatic T ransmission), or in gear (Manual T ransmission) to tow a 4WD vehicle with one end of the vehicle raised. The manufacturer r ecommends towing with all wheels OFF the ground.
MAINT AINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment— 3.7L/4.7L ........... 4 4 8 䡵 Engine Compartment— 5.7L ............... 4 4 9 䡵 Onboard Diagnostic System (OBD II) ......... 4 5 0 ▫ Loose Fuel Filler Cap Message ............ 4 5 0 䡵 Emissions Inspection And Maintenance Programs .
▫ Maintenance Free Battery ................ 4 6 1 ▫ Air Conditioner Maintenance ............. 4 6 3 ▫ Power Steering — Fluid Check ............ 4 6 4 ▫ Front Suspension Ball Joints .............. 4 6 4 ▫ Steering Linkage — Inspection ...
▫ Noise Control System Requir ed Maintenance & W arranty For 3500 2-Wheel Drive And 4-Wheel Drive Models Over 10,000 Lbs. (4 535 Kg) Gross V ehicle W eight Rating. ............. 4 8 3 ▫ Appearance Care And Protection From Corrosion ...........
ENGINE COMP ARTMENT— 3.7L/4.7L 448 MAINT AINING YOUR VEHICLE.
ENGINE COMP ARTMENT— 5.7L MAINT AINING YOUR VEHICLE 449 7.
ONBOARD DIAGNOSTIC SYSTEM (OBD II) V ehicles equipped with California emissions controls have a sophisticated onboard diagnostic system called OBDII. This system monitors the performance of the emissions, engine, and automatic transmission control systems.
message off. If the pr oblem persists, the message will appear the next time the vehicle is started. This might indicate a damaged cap. If the problem is detected twice in a row , the system will turn on the Malfunction Indicator Light (MIL). Resolving the problem will turn the MIL light off.
5. Appr oximately 15 seconds later , one of two things will happen: a. The MIL light will blink for approximately 5 sec- onds and then remain on until the first engine crank or the key is turned off. This means that your vehicle’s OBD system is not ready and you should not proceed to the I/M station.
DEALER SERVICE Y our dealer has the qualified service personnel, special tools and equipment to perform all service operations in an expert manner . Service manuals are available which include detailed service information for your vehicle. Refer to these manuals before attempting any pr ocedure yourself.
could adversely affect the engine or vehicle performance. These items should be inspected if a malfunction is observed or suspected. Engine Oil Checking Oil Level T o assure pr oper lubrication of your vehicle’s engine, the engine oil must be maintained at the correct level.
Change Engine Oil Road conditions as well as your kind of driving affect the interval at which your oil should be changed. Check the following to determine if any apply to you: • Day or night temperatures ar e below 32°F (0°C). • Stop and go driving.
Dusty Conditions Driving through dust-laden air incr eases the problems of keeping abrasive materials out of the engine. Under these conditions, special attention should be given to the engine air cleaner , the crankcase inlet air cleaner and the crankcase ventilation system.
operating temperatures. These engine oils improve low temperature starting and vehicle fuel economy . Y our engine oil filler cap also shows the recommended engine oil viscosity for your vehicle. For information on engine oil filler cap location, see the Engine Compartment illustration in this section.
quality filters should be used to assure most ef ficient service. Mopar Engine Oil Filters are a high quality oil filter and are r ecommended. Drive Belts — Check Condition and T ension Belt tension is controlled by means of an automatic tensioner .
Engine Air Cleaner Filter Under normal driving conditions, replace the air filter at the intervals shown on Schedule “A”. If, however , you drive the vehicle frequently under dusty or sever e conditions, the filter element should be inspected periodically and replaced if necessary at the intervals shown on Schedule “B”.
CAUTION! Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition. In the event of engine malfunction, particularly involv- ing engine misfire or other apparent loss of perfor- mance, have your vehicle serviced promptly .
T o minimize the possibility of catalyst damage: • Do not shut off the engine or interr upt the ignition when the transmission is in gear and the vehicle is in motion.
W ARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Don’t allow battery fluid to contact your eyes, skin or clothing. Don’t lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area imme- diately with large amounts of water .
Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an Authorized Dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test.
Refrigerant Recovery and Recycling R-134a Air Conditioning Refrigerant is a hydrofluorocar - bon (HFC) that is endorsed by the Environmental Pr o- tection Agency and is an ozone-saving product.
The ball joints originally supplied with the vehicle are permanently lubricated at the factory and do not requir e service. However , if the seals on the ball joints are damaged, the joints should be replaced. Serviceable replacement ball joints ar e available.
Front Prop Shaft Lubrication — 2500/3500 (4X4) Models Lubricate the front driveshaft gr ease fitting at each oil change listed in the appropriate Maintenance Schedule for your vehicle (Schedule “A” and “B”). Use Mopar 威 type MS-6560 (lithium based grease), or equivalent.
Windshield Wiper Blades The rubber edges of the wiper blades and the windshield should be cleaned periodically with a sponge or soft cloth and a mild nonabrasive cleaner . This will remove accu- mulations of salt or road film. Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades.
After the engine has warmed, operate the defroster for a few minutes to reduce the possibility of smearing or freezing the fluid on the cold windshield.
CRACKING DUE TO WEA THERING DOES NOT AD- VERSEL Y AFFECT PERFORMANCE. If, however , exces- sively deep localized cracks are pr esent, or any part of the exhaust system abnormally contacts the underbody hard- ware, the isolator and/or hanger should be r eplaced.
drain from the coolant r ecovery bottle. DO NOT RE- MOVE THE COOLANT PRESSURE CAP WHEN THE COOLING SYSTEM IS HOT . Cooling System — Drain, Flush and Refill At the intervals shown on the Maintenance Schedules, the system should be drained, flushed and refilled.
Adding Coolant Y our vehicle has been built with an improved engine coolant that allows extended maintenance intervals. This coolant can be used up to 5 Y ears or 100,000 miles before replacement. T o prevent reducing this extended mainte- nance period, it is important that you use the same coolant throughout the life of your vehicle.
W ARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety pre- caution. Never add coolant when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system.
When additional coolant is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill. Points T o Remember NOTE: When the vehicle is stopped after a few miles (a few kilometers) of operation, you may observe vapor coming from the fr ont of the engine compartment.
• Do not change the thermostat for summer or winter operation. If replacement is ever necessary , install ONL Y the corr ect type thermostat. Other designs may result in unsatisfactory coolant performance, poor gas mileage, and increased emissions.
Brake System Power Disc Brakes (front and rear) Disc brakes do not requir e adjustment; however , several hard stops during the br eak-in period are r ecommended to seat the linings and wear off any for eign material.
W ARNING! W orn brake hoses can burst and cause brake failure. Y ou could have an accident. If you see any signs of cracking, scuffing, or worn spots, have the brake hoses replaced immediately .
W ARNING! Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire. Use only brake fluid that has been in a tightly closed container to avoid contamination from for eign matter or moisture.
This inspection should be made with the vehicle in a level position. The fluid level should be even with the bottom of the fill hole for the Manufacturer’s C205F HD Fr ont Axles. The fluid level should be 5/8” (16 mm) below on 9 1/4” Manufacturer’s Rear Axles.
T ransfer Case Fluid Level Check This fluid level can be checked by removing the filler plug. The fluid level should be to the bottom edge of the filler plug hole with the vehicle in a level position. Lubricant Selection Refer to Fluids, Lubricants and Genuine Parts for correct fluid type.
Automatic T ransmission Selection Of Lubricant Refer to Fluids, Lubricants and Genuine Parts for correct fluid type. It is important that the transmission fluid be maintained at the prescribed level using the r ecom- mended fluid.
T o check the automatic transmission fluid level properly , the following procedur e must be used: 1. Operate the engine at idle speed and normal operating temperature. 2. The vehicle must be on level gr ound. 3. Fully apply the parking brake and press the brake pedal.
CAUTION! Be aware that if the fluid temperature is below 50°F (10°C) it may not register on the dipstick. Do not add fluid until the temperature is elevated enough to produce an accurate reading.
“purge” excess gr ease and the bearing will look slightly wet. This is normal. Periodic inspection for excess play is recommended. Rear Wheel Bearings — Manufacturer’s Axles These bearings are normally consider ed permanently lubricated.
should be performed anytime a malfunction is observed or suspected. Proper maintenance of the entir e vehicle will help the effectiveness of the noise contr ol systems. Air Cleaner Assembly Inspect air cleaner housing for proper assembly and fit. Make certain that the air cleaner is properly positioned and the cover is tight.
ENGINE COOLING SYSTEM • Removal or rendering inoperative the fan clutch. • Removal of the fan shroud. Noise Emission W arranty The manufacturer warrants that this vehicle as manufac- tured by the manufactur er , was designed, built and equipped to conform at the time it left the manufacturers control with all applicable U.
Noise Systems Maintenance Chart and Service Log Insert Month, Day , Y ear under column mileage closest to the mileage at which service was performed. MILES 6,000 12,000 18,000 24,000 30,000 36,000 42,.
Appearance Care and Protection from Corrosion Protection of Body and Paint from Corrosion V ehicle body care requir ements vary according to geo- graphic locations and usage.
W ashing • W ash your vehicle regularly . Always wash your ve- hicle in the shade using Mopar Car W ash or a mild car wash soap, and rinse the panels completely with clear water . • If insects, tar or other similar deposits have accumu- lated on your vehicle, use Mopar Super Kleen Bug and T ar Remover to remove.
• If your vehicle is damaged due to an accident or similar cause which destroys the paint and pr otective coating, have your vehicle repair ed as soon as pos- sible. The cost of such repairs is consider ed the respon- sibility of the owner . • If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc.
Interior Care Use Mopar T otal Clean to clean fabric upholstery and carpeting. Use Mopar T otal Clean to clean vinyl upholstery . Mopar T otal Clean is specifically recommended for leather upholstery . Y our leather upholstery can be best preserved by r egular cleaning with a damp soft cloth.
Glass Surfaces All glass surfaces should be cleaned on a regular basis with Mopar Glass Cleaner or any commercial household- type glass cleaner . Never use an abrasive type cleaner . Use caution when cleaning the inside rear window equipped with electric defrosters or the right r ear quarter window equipped with the radio antenna.
FUSES (INTEGRA TED POWER MODULE) An integrated Power Module is located in the engine compartment near the battery . This center contains car- tridge fuses and mini fuses.
Cavity Cartridge Fuse Mini Fuse Description 1 20 Amp Y ellow Power Outlet Console 2 20 Amp Y ellow Cabin Compartment Node (CCN) Door Locks/Brake T rans- mission Shift Inter- lock (BTSI) 3 20 Amp Y ell.
Cavity Cartridge Fuse Mini Fuse Description 1 1 20 Amp Y ellow Ignition Off Draw (IOD)-Cabin Com- partment Node (CCN)/Radio/Under Hood Lamp/W ireless Control Module (WCM)/Satellite Digi- tal Audio Rec.
Cavity Cartridge Fuse Mini Fuse Description 23 10 Amp Red Engine Control Mod- ule (ECM)/W ireless Control Module (WCM)/HVC 24 20 Amp Blue Subwoofer Amplifier (SR T -10 Only) 25 10 Amp Red Power Mirror.
Cavity Cartridge Fuse Mini Fuse Description 36 25 Amp Natural Audio_Amplifier 37 15 Amp Blue Spare 38 20 Amp Y ellow Power Outlet IP 39 10 Amp Red Sunroof/Seatbelt T en- sioner 40 20 Amp Y ellow Cigar.
VEHICLE STORAGE If you are storing your vehicle for mor e than 21 days, we recommend that you take the following steps to mini- mize the drain on your vehicle’s battery: • Disconnect the Ignition-Off Draw fuse (I.O.D.) fuse located in the Integrated Power Module, located in the engine compartment.
REPLACEMENT LIGHT BULBS LIGHT BULBS — Interior Bulb No. Overhead Console Lights ............... T S 212-2 Dome Light ............................ 7679 NOTE: For lighted switches, see your dealer for replace- ment instructions. All of the inside bulbs are brass or glass wedge base.
BULB REPLACEMENT Headlight (Halogen)/Front Park and T urn Lights CAUTION! This is a halogen bulb. A void touching the glass with your fingers. Reduced bulb life will result. 1. Open the hood 2. Remove the two (2) bolts fr om the front of the head- light housing.
3. Remove the plug fr om the inner fender well and remove the nut thr ough the access hole. 4. Pull the housing out fr om the fender to allow room to disconnect the electrical connectors.
NOTE: For easier removal, pull the headlight assembly straight forward, applying the gr eatest amount of force to the outer edge of the headlight assembly .
7. Remove housing fr om vehicle with headlight halogen bulb in housing. 8. T wist the headlight halogen bulb 1 ⁄ 4 turn and remove headlight bulb from the housing. 9. Replace headlight or side marker/turn signal/park light bulb. Do not touch the headlight halogen bulb.
2. Pull bulb straight fr om the connector . 3. Reverse pr ocedure for installation of bulbs and hous- ing. T ail, Stop, T urn and Backup Lights 1. Remove the two (2) scr ews that pass through the bed sheetmetal.
2. Pull the housing straight out fr om the body , with a quick motion, to separate the housing from the body . If not pulled straight, locators may be damaged.
4. Pull bulb straight out of socket. 5. Reverse Pr ocedure to install bulb and housing. Place the two raised blocks passed the body . Pulling Bulb From Socket Sliding Raised Blocks Past Body MAINT AIN.
Center High-Mounted Stoplight (CHMSL) With Cargo Light 1. Remove the two (2) scr ews holding the housing/lens to the body as shown. 2. Separate the connector holding the housing and wir - ing harness to the body . 3. T urn desired bulb socket 1 ⁄ 4 turn and remove socket and bulb from housing.
4. Pull desir ed bulb straight from the socket. • Outside Bulbs: Cargo Lamps • Inside Bulb: Center High Mount Stop Lamp 5. Reverse pr ocedure for installation of bulbs and hous- ing. Cab T op Clearance Lights — If Equipped 1. Remove the two scr ews from the top of the light.
2. Rotate the socket 1 ⁄ 4 turn and pull it from the light assembly . 3. Pull the bulb straight fr om it’s socket and replace. 508 MAINT AINING YOUR VEHICLE.
T ailgate ID Lights (Dual Rear Wheels) — If Equipped 1. Remove the two scr ews and housing and access the bulb sockets from the r ear . MAINT AINING YOUR VEHICLE 509 7.
2. T urn socket 1 ⁄ 4 turn counterclockwise to access the bulb. 3. Pull bulb straight out fr om socket. 4. Reverse pr ocedure for installation of bulbs and hous- ing. Rear Light Bar ID Marker (Dual Rear Wheel) – If Equipped 1. Loosen the two scr ews and the housing to gain access to the bulb sockets.
3. Pull the bulb straight out fr om the socket. 4. Reverse pr ocedure for installation of bulbs and hous- ing. Side Marker Lights (Dual Rear Wheels) 1. Push r earward on the side marker light assembly . 2. Pull the entir e assembly from the fender . 3.
FLUIDS AND CAP ACITIES U.S. Metric Fuel (Approximate) 3.7L/4.7L 5.7L 1500 Shortbed Models 26 gal. 98L 1500 Longbed Models 35 gal. 132L 1500 Shortbed Models 34 gal. 128L 2500 Shortbed Models 34 gal. 128L 2500 Longbed Models 35 gal. 132L 3500 Shortbed Models 34 gal.
U.S. Metric 5.7L Engine V -8 (SAE 5W -20, API Certified). For tr ucks operating under a gross combined weight rating less than 14,000 lbs. 7.0 qts. 6.6L 5.7L Engine V -8 (SAE 5W -30, API Certified). For 2500/ 3500 trucks operating under a gr oss combined weight rating greater than 14,000 lbs.
FLUIDS, LUBRICANTS AND GENUINE P ARTS Engine Component Fluids, Lubricants and Genuine Parts Engine Coolant Mopar 威 Antifr eeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Or- ganic Additive T echnology) or equivalent. 3.7/4.7L Engine Oil Use SAE 5W -30, API Certified, meeting material standar d MS-6395.
Chassis Component Fluids, Lubricants and Genuine Parts. Automatic T ransmission Mopar 威 A TF+4, Automatic T ransmission Fluid. T ransfer Case Mopar 威 A TF+4, Automatic T ransmission Fluid. NVG 246 Automatic T ransfer Case Only Mopar 威 PN 05179014AA, NVG 246 Automatic T ransmission Fluid or equivalent.
.
MAINTENANCE SCHEDULES CONTENTS 䡵 Emission Control System Maintenance ........ 5 1 8 䡵 Maintenance Schedules – Gas Engines ........ 5 1 8 ▫ Schedule “B” .
EMISSION CONTROL SYSTEM MAINTENANCE The “Scheduled” maintenance services, listed in bold type in this section (Section 8) must be done at the times or mileages specified to assure the continued pr oper functioning of the emission control system.
• Heavy Loading. • T axi, police, or delivery service (commercial service). • Off-r oad or desert operation. • If equipped for and operating with E-85 (ethanol) fuel.
At Each Stop for Fuel • Check the engine oil level about 5 minutes after a fully warmed engine is shut off. Checking the oil level while the vehicle is on level ground will impr ove the accu- racy of the oil level reading. Add oil only when the level is at or below the ADD or MIN mark.
Schedule “B” Follow schedule “B” if you usually operate your vehicle under one or more of the following conditions. • Day or night temperatures ar e below 32° F (0° C). • Stop and go driving. • Extensive engine idling. • Driving in dusty conditions.
Miles 3,000 6,000 9,000 12,000 15,000 (Kilometers) (5 000) (10 000) (14 000) (19 000) (24 000) Change engine oil and engine oil filter at interval shown or 3 months, whichever comes first. X X XXX Lubricate Front Drive Shaft Fitting (2500/3500, 4X4). X X X X X Rotate tires.
Miles 18,000 21,000 24,000 27,000 30,000 (Kilometers) (29 000) (34 000) (39 000) (43 000) (48 000) Change engine oil and engine oil filter at interval shown or 3 months, whichever comes first. X X XXX Lubricate Front Drive Shaft Fitting (2500/3500, 4X4).
Miles 33,000 36,000 39,000 42,000 45,000 (Kilometers) (53 000) (58 000) (63 000) (68 000) (72 000) Change engine oil and engine oil filter at interval shown or 3 months, whichever comes first. X X XXX Lubricate Front Drive Shaft Fitting (2500/3500, 4X4).
Miles 48,000 51,000 54,000 57,000 60,000 (Kilometers) (77 000) (82 000) (87 000) (92 000) (97 000) Change engine oil and engine oil filter at interval shown or 3 months, whichever comes first. X X XXX Lubricate Front Drive Shaft Fitting (2500/3500, 4X4).
Miles 63,000 66,000 69,000 72,000 75,000 (Kilometers) (101 000) (106 000) (1 11 000) (1 16 000) (121 000) Change engine oil and engine oil filter at interval shown or 3 months, whichever comes first. X X XXX Lubricate Front Drive Shaft Fitting (2500/3500, 4X4).
Miles 78,000 81,000 84,000 87,000 90,000 (Kilometers) (126 000) (130 000) (135 000) (140 000) (145 000) Change engine oil and engine oil filter at interval shown or 3 months, whichever comes first. X X XXX Lubricate Front Drive Shaft Fitting (2500/3500, 4X4).
Miles 93,000 96,000 99,000 102,000 (Kilometers) (150 000) (154 000) (159 000) (164 000) Change engine oil and engine oil filter at interval shown or 3 months, whichever comes first. XXX X Lubricate Front Drive Shaft Fitting (2500/3500, 4X4). X X X X Rotate tires.
Miles 105,000 108,000 11 1,000 114,000 1 17,000 120,000 (Kilometers) (169 000) (174 000) (179 000) (183 000) (188 000) (193 000) Change engine oil and engine oil filter at interval shown or 3 months, whichever comes first. X X XXXX Lubricate Front Drive Shaft Fitting (2500/3500, 4X4).
Miles 105,000 108,000 11 1,000 114,000 1 17,000 120,000 (Kilometers) (169 000) (174 000) (179 000) (183 000) (188 000) (193 000) Inspect PCV valve, replace as necessary . ** X Inspect auto tension drive belt and replace if r e- quired (3.7L/4.7L/5.7L).
Miles 123,000 126,000 129,000 132,000 135,000 138,000 (Kilometers) (198 000) (203 000) (208 000) (212 000) (217 000) (222 000) Change engine oil and engine oil filter at inter- val shown or 3 months, whichever comes first. X X XXXX Lubricate Front Drive Shaft Fitting (2500/3500, 4X4).
Miles 141,000 144,000 147,000 150,000 (Kilometers) (227 000) (232 000) (237 000) (241 000) Change engine oil and engine oil filter at interval shown or 3 months, whichever comes first. XX X X Lubricate Front Drive Shaft Fitting (2500/3500, 4X4). X X X X Rotate tires.
Miles 141,000 144,000 147,000 150,000 (Kilometers) (227 000) (232 000) (237 000) (241 000) Drain and refill automatic transmission fluid and change main sump and spin-on cooler return filter (if equipped)*. X Flush and replace engine coolant if not r eplaced at 120,000 miles (193 000 km).
Schedule “A” Miles 6,000 12,000 18,000 24,000 30,000 (Kilometers) (10 000) (19 000) (29 000) (39 000) (48 000) [Months] [6] [12] [18] [24] [30] Change engine oil and engine oil filter . X X X X X Rotate tir es. X X X X X Check spare tir e for proper pr essure and correct stowage.
Miles 36,000 42,000 48,000 54,000 60,000 66,000 (Kilometers) (58 000) (68 000) (77 000) (87 000) (97 00) (106 000) [Months] [36] [42] [48] [54] [60] [66] Change engine oil and engine oil filter . X X X X X X Rotate tires. X X X X X X Check spare tir e for proper pr essure and correct stowage.
Miles 72,000 78,000 84,000 90,000 96,000 (Kilometers) (1 16 000) (126 000) (135 000) (145 000) (154 000) [Months] [72] [78] [84] [90] [96] Change engine oil and engine oil filter . X X X X X Rotate tir es. X X X X X Check spare tir e for proper pr essure and correct stow- age.
Miles 102,000 108,000 114,000 120,000 (Kilometers) (164 000) (174 000) (183 000) (193 000) [Months] [102] [108] [1 14] [120] Change engine oil and engine oil filter . X X X X Rotate tir es. X X X X Check spare tir e for proper pr essure and correct stowage.
Miles 126,000 132,000 138,000 144,000 150,000 (Kilometers) (203 000) (212 000) (222 000) (232 000) (241 000) [Months] [126] [132] [138] [144] [150] Change engine oil and engine oil filter . X X X X X Rotate tir es. X X X X X Check spare tir e for proper pr essure and correct stowage.
Miles 126,000 132,000 138,000 144,000 150,000 (Kilometers) (203 000) (212 000) (222 000) (232 000) (241 000) [Months] [126] [132] [138] [144] [150] Inspect engine air cleaner filter , replace if neces- sary . X Replace spark plugs. X Inspect PCV V alve, replace as necessary .
.
IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V ehicle .............................. 5 4 2 ▫ Prepar e For The Appointment ............ 5 4 2 ▫ Prepar e A List ........................ 5 4 2 ▫ Be Reasonable W ith Requests .
SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty , discuss additional charges with the service manager .
technicians, special tools, and the latest information to assure your vehicle is fixed corr ectly and in a timely manner . This is why you should always talk to your dealer’s service manager first.
Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its Customer Center .
W ARRANTY INFORMA TION (U.S. V ehicles Only) See the W arranty Information Booklet for the terms and provisions of DaimlerChrysler’s warranties applicable to this vehicle. MOP AR 姞 P ARTS Mopar 威 fluids, lubricants, parts, and accessories are available from your dealer .
PUBLICA TION ORDER FORMS T o order the following manuals, you may use either the website or the phone numbers listed below . V isa, Mas- tercar d, American Express, and Discover or ders are ac- cepted. If you prefer mailing your payment, please call for an order form.
Call T oll Free at: • 1–800–890–4038 (U.S.) • 1–800–387–1 143 (Canada) Or V isit us on the W orld Wide W eb at: • www .techauthority .
on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction perfor- mance. W ARNING! The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics.
INDEX 10.
Adding Fuel ........................... 3 8 4 Adjustable Pedals ....................... 1 7 4 Air Cleaner , Engine (Engine Air Cleaner Filter) . 459,484 Air Conditioner Maintenance ............... 4 6 3 Air Conditioning Refrigerant ............. 463,464 Air Conditioning System .
Ball Joints ............................. 4 6 4 Battery ............................... 4 6 1 Emergency Starting ..................... 4 3 8 Saving Feature (Pr otection) ............... 1 6 6 Bearings .............................. 4 8 2 Belts, Drive .
Cellular Phone .......................... 1 2 6 Center High Mounted Stop Light ............ 5 0 6 Center Lap Belts ....................... 43,83 Center Seat Storage Compartment ......... 203,204 Certification Label ....................... 3 8 9 Chart, T ire Sizing .
Cruise Contr ol (Speed Control) .............. 1 7 5 Cup Holder ............................ 1 9 9 Customer Assistance ..................... 5 4 2 Data Recorder , Event .................... 58,97 Daytime Running Lights ................... 1 6 7 Dealer Service .
T ow Hooks .......................... 4 4 2 T owing ............................. 4 4 3 Emission Control System Maintenance ......... 5 1 8 Emission Related Components .............. 4 6 1 Engine ............................ 448,449 Air Cleaner ......
Starting ............................. 3 8 8 Flooded Engine Starting ................... 3 0 3 Fluid, Brake ........................... 5 1 5 Fluid Capacities ......................... 5 1 2 Fluid Level Checks Automatic T ransmission .................
V oltmeter ............................ 2 2 7 Gear Ranges ........................ 307,314 General Information ...................... 1 8 Glass Cleaning .......................... 4 9 1 Grocery Bag Retainer ..................... 2 0 8 Gross Axle W eight Rating .
Infant Restraint ................... 60,61,99,100 Inflation Pressur e T ires .................... 3 7 5 Inside Rearview Mirror ................... 1 2 1 Instrument Cluster .................... 226,227 Instrument Panel and Contr ols .............. 2 2 5 Instrument Panel Lens Cleaning .
Courtesy/Reading ..................... 1 7 9 Cruise .............................. 2 3 6 Daytime Running ...................... 1 6 7 Dual Wheel Assembly Rear ............... 5 0 9 Electronic Stability Pr ogram (ESP) Indicator . 234,353 F o g ........
Lug Nuts ............................. 4 3 2 Lumbar Support ........................ 1 5 2 Maintenance ........................... 4 5 3 Maintenance Free Battery .................. 4 6 1 Maintenance Procedur es ................... 4 5 3 Maintenance Schedule .
Odometer .......................... 230,235 T r i p ............................. 230,235 Off-Pavement Driving (Of f-Road) ............ 3 3 7 Off-Road Driving (Of f-Pavement) ............ 3 3 7 Oil, Engine ......................... 454,514 Capacity ..
Door Locks ........................... 2 7 Mirrors ............................. 1 2 3 Outlet (Auxiliary Electrical Outlet) .......... 1 9 6 Seats ............................ 153,154 Sliding Rear W indow ................... 2 0 9 Steering ...........
Remote Keyless Entry (RKE) ................. 2 0 Remote Sound System (Radio) Controls ........ 2 8 0 Remote Starting System .................... 2 4 Replacement T ires ....................... 3 7 3 Reporting Safety Defects ................... 5 4 5 Restraint, Head .
Selection of Coolant (Antifreeze) .......... 470,514 Sentry Key (Immobilizer) ................... 1 5 Service Assistance ....................... 5 4 2 Service Contract ......................... 5 4 4 Service Manuals ........................ 5 4 6 Setting the Clock .
Power ........................... 343,464 Wheel Lock ........................... 1 5 Wheel, T ilt ........................... 1 7 3 Steering Wheel Mounted Sound System Controls ............................. 2 8 0 Storage, Behind the Seat .............
Radial .............................. 3 6 9 Replacement ......................... 3 7 3 Rotation ............................. 3 7 7 Safety ........................... 358,366 Sizes ............................... 3 5 9 Snow T ires ...................
Fluid ............................... 5 1 5 Maintenance ....................... 479,480 Manual ..................... 302,312,314,479 Shifting .......................... 306,315 T ransmitter , Garage Door Opener (HomeLink 威 ) . . 186 T read W ear Indicators .
W indows .............................. 3 1 Power ............................... 3 1 Rear Sliding .......................... 2 1 0 W indshield Defroster .................. 285,287 W indshield W ashers ................ 171,172,467 Fluid ..............
NOTES.
デバイスDodge 2007 Ram 3500の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Dodge 2007 Ram 3500をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはDodge 2007 Ram 3500の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Dodge 2007 Ram 3500の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Dodge 2007 Ram 3500で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Dodge 2007 Ram 3500を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はDodge 2007 Ram 3500の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Dodge 2007 Ram 3500に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちDodge 2007 Ram 3500デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
