Dodgeメーカー2010 Avengerの使用説明書/サービス説明書
ページ先へ移動 of 448
Avenger OWNER’ S MANUAL 2010.
T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................ 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE .............................. 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............
.
INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 䡵 How T o Use This Manual .................. 4 䡵 W arnings And Cautions ................... 6 䡵 V ehicle Identification Number .............. 6 䡵 V ehicle Modifications/Alterations .
INTRODUCTION Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it r epresents pr ecision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles.
INTRODUCTION 5.
W ARNINGS AND CAUTIONS This Owner’s Manual contains W ARNINGS against op- erating procedur es that could result in an accident or bodily injury . It also contains CAUTIONS against proce- dures that could r esult in damage to your vehicle. If you do not read this entir e manual, you may miss important information.
VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
.
THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W ord About Y our Keys ................. 1 2 ▫ Ignition Key Removal .................. 1 2 ▫ Key-In-Ignition Reminder ............... 1 4 ▫ Locking Doors W ith A Key .............. 1 4 䡵 Sentry Key 威 .
▫ Remote Open W indow Feature — If Equipped ......................... 2 4 ▫ Using The Panic Alarm ................. 2 4 ▫ Programming Additional T ransmitters ...... 2 5 ▫ T ransmitter Battery Replacement .......... 2 5 ▫ General Information .
▫ Adjustable Upper Shoulder Belt Anchorage . . . 45 ▫ Rear Seat Belts ....................... 4 6 ▫ Automatic Locking Retractors (ALR) Mode — If Equipped ................... 4 6 ▫ Seat Belt Pretensioners — If Equipped ...... 4 7 ▫ Supplemental Active Head Restraints (AHR) .
A WORD ABOUT YOUR KEYS The authorized dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys fr om your authorized dealer . Ask your authorized dealer for these numbers and keep them in a safe place.
NOTE: • If you try to remove the key befor e you place the shift lever in P ARK, the key may become trapped tempo- rarily in the ignition switch lock cylinder . If this occurs, rotate the key to the right slightly , then remove the key as described.
CAUTION! An unlocked car is an invitation to thieves. Always remove key from the ignition and lock all doors when leaving the vehicle unattended. Key-In-Ignition Reminder Opening the driver’s door when the key is in the ignition, sounds a signal to remind you to r emove the key .
NOTE: A key , which has not been programmed, is also considered an invalid key even if it is cut to fit the ignition switch lock cylinder for that vehicle. During normal operation, after turning the ignition switch, the V ehicle Security Light will turn on for three seconds for a bulb check.
At the time of purchase, the original owner is pr ovided with a four-digit Personal Identification Number (PIN). This PIN is requir ed for authorized dealer replacement of keys. Duplication of keys may be performed at an authorized dealer or by using the Customer Key Pro- gramming procedur e.
The new Sentry Key 威 is programmed. The Remote Keyless Entry (RKE) transmitter will also be pro- grammed during this procedure. Repeat this procedur e to program up to eight keys. If you do not have a programmed Sentry Key 威 , contact your authorized dealer for details.
Rearming The System If something triggers the alarm, and no action is taken to disarm it, the V ehicle Security Alarm will turn of f the horn after three minutes, turn of f all of the visual signals after 15 minutes, and then the V ehicle Security Alarm will rearm itself.
T o Disarm The System Either press the UNLOCK button on the RKE transmitter or insert a valid Sentry Key 威 into the ignition lock cylinder and turn the key to the ON/ST AR T position. NOTE: • The driver’s door key cylinder and the trunk button on the RKE transmitter cannot arm or disarm the V ehicle Security Alarm.
This feature also turns on the appr oach lighting (if equipped). Refer to “Electronic V ehicle Information Cen- ter (EVIC)/Personal Settings (Customer-Pr ogrammable Features)” in “Understanding Y our Instrument Panel” for further information.
T o Unlock the Doors Press and r elease the UNLOCK button on the RKE transmitter once to unlock the driver’s door , or twice to unlock all doors. The turn signal lights will flash to acknowledge the unlock signal. The Illuminated Entry system (if equipped) will also turn on.
2. Release both buttons at the same time. 3. T est the feature while outside of the vehicle, by pressing the LOCK/UNLOCK buttons on the RKE trans- mitter with the ignition in the LOCK position, and the key removed. 4. Repeat these steps if you want to return this feature to its previous setting.
3. T est the feature while outside of the vehicle, by pressing the LOCK/UNLOCK buttons on the RKE trans- mitter with the ignition in the LOCK position, and the key removed. 4. Repeat these steps if you want to return this feature to its previous setting.
• For vehicles not equipped with the EVIC, perform the following steps: 1. Press the LOCK button on a programmed RKE trans- mitter for at least four seconds, but not longer than 10 seconds. Then, press the P ANIC button while still holding the LOCK button.
headlights and park lights will flash, the horn will pulse on and off, and the Illuminated Entry system (if equipped) will turn on. The Panic Alarm will stay on for three minutes unless you turn it off by pr essing the P ANIC button a second time or if the vehicle speed is 5 mph (8 km/h) or greater .
2. Remove and replace the battery . A void touching the new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery , clean it with rubbing alcohol. 3. T o assemble the RKE transmitter case, snap the two halves together .
How to Use Remote Start All of the following conditions must be met before the engine will remote start: • Shift lever in P ARK • Doors closed • Hood closed • T runk closed • Hazard switch o.
NOTE: • If an engine fault is present the vehicle will start and then shut down 10 seconds later . • For security , power window operation is disabled when the vehicle is in the Remote Start mode. • The engine can be started two consecutive times (two 15 minute cycles) with the RKE transmitter .
DOOR LOCKS Manual Door Locks Use the manual door lock plunger to lock the doors from inside the vehicle. If the plunger is down when the door is closed, the door will lock.
CAUTION! An unlocked vehicle is an invitation to thieves. Always remove the key from the ignition and lock all of the doors when leaving the vehicle unattended. Power Door Locks A door lock switch is located on the driver and passenger door panel. Press this switch to lock or unlock the doors.
Auto Unlock On Exit The doors will unlock automatically on vehicles with power door locks if: 1. The Automatic Unlock Doors On Exit featur e is en- abled. 2. The transmission shift lever was in gear and the vehicle speed returned to 0 mph (0 km/h). 3.
4. Repeat these steps if you want to return this feature to its previous setting. NOTE: Use the Automatic Unlock Doors On Exit feature in accordance with local laws. Child Protection Door Lock System (Rear Doors) The Child Protection Door Locks (Rear Doors) ar e located inside the rear edge of the door .
NOTE: For emergency exit with the system engaged, move the lock plunger up (UNLOCKED position), roll down the window , and open the door with the outside door handle.
There is a single window contr ol on the passenger’s door trim panel, which operates the passenger door window . The window controls will operate when the ignition switch is turned to the ON or ACC position, and when the accessory delay feature is active.
Auto Window Up — If Equipped Lift the window switch to the second detent, release, and the window will go up automatically . T o cancel the Auto Up movement, operate the switch either in the up or down direction and r elease the switch.
Window Lockout Switch The window lockout switch on the driver’s door allows you to disable the window control on the other doors. T o disable the window controls on the other doors, pr ess the window LOCK button. T o enable the window controls, press the window contr ol button again.
buffeting occurs with the sunr oof open, then adjust the sunroof opening to minimize the buf feting. TRUNK RELEASE Use the Remote Keyless Entry (RKE) transmitter to open the trunk fr om outside the vehicle.
T runk Internal Emergency Release As a security measure, a T runk Internal Emer gency Release lever is built into the trunk latching mechanism. In the event of an individual being locked inside the trunk, the trunk can be simply opened by pulling on the glow-in-the-dark handle attached to the trunk latching mechanism.
• An energy-absorbing steering column and steering wheel • Knee bolsters/blockers for front seat occupants • Front seat belts incorporate pr etensioners to enhance occupant protection by managin.
Buckle up even though you are an excellent driver , even on short trips. Someone on the road may be a poor driver and cause a collision that includes you. This can happen far away from home or on your own str eet. Research has shown that seat belts save lives, and they can reduce the seriousness of injuries in a collision.
W ARNING! (Continued) • W earing your belt in the wrong place could make your injuries in a collision much worse. Y ou might suffer internal injuries, or you could even slide out of part of the belt. Follow these instructions to wear your seat belt safely and to keep your pas- sengers safe, too.
W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you properly .
W ARNING! • A belt that is worn under your arm is dangerous. Y our body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury . A belt worn under the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones.
W ARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as possible and keep it snug. • A twisted belt can’t do its job properly .
Lap/Shoulder Belt Untwisting Procedure Use the following procedur e to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180° to create a fold that begins immediately above the latch plate.
As a guide, if you are shorter than average, you will prefer a lower position, and if you ar e taller than average, you will prefer a higher position. When you r elease the anchorage, try to move it up or down to make sure that it is locked in position.
Seat Belt Pretensioners — If Equipped The seat belts for both front seating positions may be equipped with pretensioning devices that ar e designed to remove slack fr om the seat belt in the event of a collision. These devices improve the performance of the seat belt by assuring that the belt is tight about the occupant early in a collision.
However if during a front impact, a secondary r ear impact occurs, the AHR may deploy based on the sever- ity and type of the impact. CAUTION! All occupants, including the driver , should not oper- at.
1. Grasp the deployed AHR fr om the rear seat. 2. Position the hands on the top of the deployed AHR at a comfortable position. 3. Pull down then rearward towards the r ear of the vehicle then down to engage the locking mechanism.
4. The AHR fr ont soft foam and trim half should lock into the back decorative plastic half. NOTE: • If you have difficulties or pr oblems resetting the Active Head Restraints, see an authorized dealer . • For safety reasons, have the Active Head Restraints checked by a qualified specialist at an authorized dealer .
Enhanced Seat Belt Use Reminder System (BeltAlert 姞 ) If the driver’s seat belt has not been buckled within 60 seconds of starting the vehicle and if the vehicle speed is greater than 5 mph (8 km/h), the BeltAlert 威 will alert the driver to buckle the seat belt.
NOTE: W atch for the Seat Belt Reminder Light to turn on while unbuckling and off while r e-buckling the seat belt. It may be necessary to retract the seat belt partially each time when unbuckling. 4. T urn the ignition switch to the LOCK position. A single chime will sound to signify that you have success- fully completed the programming.
W ARNING! Using a seat belt extender when not needed can increase the risk of injury in a collision. Only use when the lap belt is not long enough when it is worn low and snug, and in the recommended seating positions. Remove and store the extender when not needed.
The Advanced Front Airbags have a multistage inflator design. This allows the airbag to have differ ent rates of inflation that are based on the severity and type of collision.
• Knee Impact Bolster • Driver Advanced Front Airbag • Passenger Advanced Front Airbag • Supplemental Seat-Mounted Side Airbags (SAB) • Supplemental Side Airbag Inflatable Curtains (SABIC) .
W ARNING! (Continued) • Do not put anything on or around the airbag covers or attempt to open them manually . Y ou may damage the airbags and you could be injured because the airbags may no longer be functional. The protective covers for the airbag cushions are designed to open only when the airbags are inflat- ing.
When the airbag deploys, it opens the seam between the front and side of the seat’s trim cover . Each airbag deploys independently , that is a left side impact deploys the left airbag only and a right-side impact deploys only the right airbag.
The system includes side impact sensors adjacent to both front and r ear seat occupants that are calibrated to deploy the SABIC airbags during impacts that requir e airbag occupant protection.
W ARNING! Infants in rear facing child restraints should NEVER ride in the front seat of a vehicle with a passenger Advanced Front Airbag. An airbag deployment can cause severe injury or death to infants in that posi- tion.
5. If the airbag system in this vehicle needs to be modified to accommodate a disabled person, contact the Customer Center . Phone numbers are provided under ⴖ If Y ou Need Assistance ⴖ . W ARNING! • Relying on the airbags alone could lead to more severe injuries in a collision.
The ORC determines if deployment of the front and/or side airbags in a frontal or side collision is r equired. Based on the impact sensors signals, a central electronic ORC deploys the Advanced Front .
in the ACC position, or not in the ignition, the airbag system is not on and the airbags will not inflate. The ORC contains a backup power supply system that may deploy the airbags even if the battery loses power or it becomes disconnected prior to deployment.
separate and fold out of the way as the airbags inflate to their full size. The airbags fully inflate in about 50 to 70 milliseconds. This is about half of the time it takes to blink your eyes. The airbags then quickly deflate while helping to restrain the driver and fr ont passenger .
covers the window . The airbag inflates in about 30 ms (about one-quarter of the time that it takes to blink your eyes) with enough force to injur e you if you are not belted and seated properly , or if items are positioned in the ar ea where the side curtain airbag inflates.
NOTE: Front and/or side airbags will not deploy in all collisions. This does not mean something is wrong with the airbag system. If you do have a collision, which deploys the airbags, any or all of th.
Maintaining Y our Airbag System W ARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. Y ou could be injured if the airbag system is not there to protect you.
Airbag W arning Light Y ou will want to have the airbags ready to inflate for your protection in a collision. While the airbag system is designed to be mainte- nance free, if any of the following occurs, have an authorized dealer service the system immediately .
2. Under certain circumstances, EDR data may not be recor ded (e.g., loss of battery power). In conjunction with other data gathered during a com- plete accident investigation, the electronic data may.
3. Requested by police under a legal warrant. 4. Otherwise required by law . Data parameters that are r ecorded: • Diagnostic trouble code(s) and warning light status for electronically-contr olled .
There ar e differ ent sizes and types of restraints for children fr om newborn size to the child almost large enough for an adult safety belt. Always check the child seat owner’s manual to ensure you have the corr ect seat for your child. Use the restraint that is corr ect for your child.
Older Children and Child Restraints Children who weigh mor e than 20 lbs (9 kg) and who are older than one year can ride forward-facing in the vehicle. Forward-facing child seats and convertible child seats used in the forward-facing dir ection are for childr en who weigh 20 to 40 lbs (9 to 18 kg) and who are older than one year .
bend over the front of the seat when their back is against the seatback, should use the lap/shoulder belt in a rear seat. • Before buying any r estraint system, make sure that it has a label certifying that it meets all applicable Safety Standards.
CAUTION! When your child restraint is not in use, secure it in the vehicle with the seat belt or remove it from the vehicle. Don’t leave it loose in the vehicle. In a sudden stop or collision, it could strike the occupants or seatbacks and cause serious personal injury .
restraints having tether straps and hooks for connection to the top tether anchorage, have been available for some time. In fact, many child restraint manufactur ers will provide add-on tether strap kits for some of their older products. T ether anchorage kits are also available for most older vehicles.
Remind all children in the vehicle that the seat belts ar e not toys and should not be played with, and never leave your child unattended in the vehicle. Installing the LA TCH-Compatible Child Restraint System W e urge you to car efully follow the directions of the manufacturer when installing your child r estraint.
cover directly behind the seat wher e you are placing the child restraint and attach the tether strap to the anchor - age, being careful to r oute the tether strap to provide the most direct path between the anchor and the child restraint.
Installing Child Restraint T ether Strap 1. Rotate the cover over the anchor directly behind the seat where you ar e placing the child restraint. 2. Route the tether strap to provide the most direct path for the strap between the anchor and the child seat.
Installing Child Restraints Using the V ehicle Seat Belt The passenger seat belts are equipped with Automatic Locking Retractors (ALRs), which are designed to keep the lap portion tight around the child r estraint. The seat belt must be in the Automatic Locking Mode in order to enable a child r estraint to be tightly installed.
Children T oo Large for Booster Seats Children who ar e large enough to wear the shoulder belt comfortably , and whose legs are long enough to bend over the front of the seat when their back is against the seatback, should use the lap/shoulder belt in a rear seat.
The engine oil installed in the engine at the factory is a high-quality energy conserving type lubricant. Oil changes should be consistent with anticipated climate conditions under which vehicle operations will occur . For the recommended viscosity and quality grades r efer to “Maintenance Procedur es” in “Maintaining Y our V e- hicle”.
Exhaust Gas W ARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you.
Safety Checks Y ou Should Make Inside the V ehicle Seat Belts Inspect the belt system periodically , checking for cuts, frays, and loose parts. Damaged parts must be replaced immediately . Do not disassemble or modify the system. Front seat belt assemblies must be r eplaced after a collision.
W ARNING! Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious per- sonal injury . • Always make sure that floor mats are properly attached to the floor mat fasteners.
Periodic Safety Checks Y ou Should Make Outside the V ehicle T ires Examine tires for excessive tr ead wear and uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread. Inspect the tr ead and sidewall for cuts and cracks.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors .............................. 8 9 ▫ Inside Day/Night Mirror ................ 8 9 ▫ Automatic Dimming Mirror — If Equipped . . . 90 ▫ Power Mirrors ....................... 9 0 ▫ Adjusting Side V iew Mirrors .
▫ Fold-Flat Front Passenger Seat ........... 1 0 2 ▫ Folding Rear Seat .................... 1 0 3 ▫ Folding Rear Seat Center Armrest ........ 1 0 4 䡵 T o Open And Close The Hood ............ 1 0 5 䡵 Lights ............................. 1 0 6 ▫ Multifunction Lever .
䡵 Electronic Speed Contr ol ................ 1 1 8 ▫ T o Activate ......................... 1 1 8 ▫ T o Set a Desired Speed ................ 1 1 9 ▫ T o Deactivate ....................... 1 1 9 ▫ T o Resume Speed .................... 1 1 9 ▫ T o V ary The Speed Setting .
䡵 Storage ............................. 1 3 4 ▫ Driver’s Side Sunglass Holder — If Equipped ........................ 1 3 4 ▫ C a r g o A r e a ........................ 1 3 5 䡵 Console Features ...................... 1 3 6 ▫ Dual Storage Bins .
MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the r ear window . Headlight glare can be r educed by moving the small control under the mirr or to the night position (toward the rear of the vehicle).
Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glar e from vehicles behind you. Y ou can turn the feature on or off by pr essing the button at the base of the mirror . A light next to the button will illuminate to indicate when the dimming feature is activated.
After selecting a mirror , move the knob in the same direction you want the mirr or to move. When finished, return the knob to the center O (OFF) position to guar d against accidentally moving a mirror position.
Outside Mirror — Passenger Side Adjust the convex outside mirror so you can just see the side of your vehicle in the part of the mirror closest to the vehicle. W ARNING! V ehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are.
Uconnect™ Phone — IF EQUIPPED Uconnect™ Phone is a hands-free system that allows you to use voice commands to dial a phone number stored in your cellular phone. Press the Uconnect™ Phone button on the radio or steering wheel controls (if equipped) and follow the instructions to pair the cellular phone.
Manual Front Seat Adjustments The adjusting bar is located at the front of the seats, near the floor . Pull the bar upward to move the seat to the desired position. After releasing the adjusting bar , apply forward and r earward body pr essure to be sur e the seat is latched.
Driver Seat Manual Height Adjuster — If Equipped A lever style height adjustment feature enhances comfort for petite as well as tall drivers. A lever with a ratcheting mechanism, located on the outboard side of the seat, raises and lowers it. T otal travel is 2.
W ARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked.
Adjusting Active Head Restraints Active Head Restraints can reduce the risk of injury in the event of a rear impact. The Active Head Restraint should be adjusted so the top of the head restraint is located above the top of your ear .
For comfort the Active Head Restraints can be tilted forward and backwar d. T o tilt the head restraint closer to the back of your head, pull outward on the bottom of the head restraint. Push r earward on the bottom of the head restraint to move the head r estraint away from your head.
• In the event of deployment of an Active Head Re- straint, refer to “Occupant Restraints/Resetting Active Head Restraints (AHR)” in “Things to Know Before Starting Y our V ehicle” for further information.
the seat up, down, forward, r earward, or to tilt the seat. Use the seatback control to adjust the angle of the seatback. W ARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control.
Heated Seats — If Equipped This feature heats the fr ont driver and passenger seats. The controls for the heated seats ar e located in the center console below the climate controls. After turning the ignition ON, you can choose from High, Low , or Off heat settings.
W ARNING! (Continued) • Do not place anything on the seat that insulates against heat, such as a blanket or cushion. This may cause the seat heater to overheat. Sitting in a seat that has been overheated could cause serious burns due to the increased surface temperature of the seat.
The hard seatback featur es a work surface and a molded rim for retaining items stor ed on the seatback panel. Folding Rear Seat T o provide additional storage ar ea, the rear seatback can be folded forward. Pull on the loops shown in the pictur e to fold down either or both seatbacks.
W ARNING! The rear cargo area of the vehicle (with the rear seatbacks in the locked-up or folded down position) should not be used as a play area by children. They could be seriously injured in an accident. Children should be seated and using the proper restraint system.
TO OPEN AND CLOSE THE HOOD T o open the hood, two latches must be released. 1. Pull the hood release lever located under the left side of the instrument panel. 2. Lift the secondary latch located under the front edge of the hood, near the center and raise the hood.
Use the hood prop r od to secure the hood in the open position. Place the upper end of the prop r od in the hole on the left underside of the hood. Before closing the hood, make sur e to stow the prop r od in its proper location. CAUTION! T o prevent possible damage, do not slam the hood to close it.
passing light, fog lights, instrument panel light dimming and turn signals. The multifunction lever is located on the left side of the steering column. Headlights and Parking Lights T urn the end of the multifunction lever to the first detent for parking light operation.
Automatic Headlights — If Equipped T urning the end of the multifunction lever to the third detent (AUTO), will activate the automatic headlight system. W ith the engine running and the multifunction lever in the AUTO position, the headlights will turn on and turn off based on the surr ounding light levels.
NOTE: If either light remains on and does not flash, or there is a very fast flash rate, check for a defective outside light bulb. If an indicator fails to light when the lever is moved, it would suggest that the indicator bulb is defective.
Fog Lights — If Equipped The front fog light switch is on the multifunction lever . T o activate the front fog lights, turn on the parking lights or the low beam headlights and pull out the end of the multifunction lever . NOTE: The front fog lights will only operate with the headlights on low beam.
Instrument Panel Dimmer Rotate the center portion of the lever to the extreme bottom position to fully dim the instrument panel lights and prevent the interior lights fr om illuminating when a door is opened.
will remain on until the switch is pr essed a second time, so be sure they have been turned of f before leaving the vehicle. They will not turn off automatically . Interior lighting also comes on when a door is opened or the dimmer control is turned fully upwar d, past the second detent.
Rotate the end of the lever to the LO position for low-speed wiper operation, or to the HI position for high-speed wiper operation. NOTE: The wipers will automatically return to the park position if you turn the ignition switch OFF while they are operating.
CAUTION! • T urn the windshield wipers off when driving through an automatic car wash. Damage to the windshield wipers may result if the wiper control is left in any position other than off. • Always remove any buildup of snow that prevents the windshield wiper blades from returning to the off position.
Windshield W ashers T o use the washer , pull the windshield wiper/washer control lever towar d you and hold it for as long as washer spray is desired.
Mist Feature Push down on the wiper control lever to activate a single wipe to clear the windshield of road mist or spray fr om a passing vehicle. As long as the lever is held down, the wipers will continue to operate.
TIL T/TELESCOPING STEERING COLUMN This feature allows you to tilt the steering column upward or downwar d. It also allows you to lengthen or shorten the steering column. The tilt/telescoping control handle is located below the steering wheel at the end of the steering column.
ELECTRONIC SPEED CONTROL When engaged, the Electronic Speed Contr ol takes over the accelerator operation at speeds greater than 25 mph (40 km/h). The Electronic Speed Contr ol lever is located on the right side of the steering wheel.
W ARNING! Leaving the Electronic Speed Control on when not in use is dangerous. Y ou could accidentally set the system or cause it to go faster than you want. Y ou could lose control and have an accident. Always leave the system off when you are not using it.
ACCEL lever . If the lever is continually held in the RESUME ACCEL position, the set speed will continue to increase until the lever is r eleased, then the new set speed will be established. T apping RESUME ACCEL once will result i na1m p h (2 km/h) speed increase.
On steep hills, a greater speed loss or gain may occur so it may be preferable to drive without Electr onic Speed Control. W ARNING! Electronic Speed Control can be dangerous where the system cannot maintain a constant speed. Y our ve- hicle could go too fast for the conditions, and you could lose control.
W ARNING! • Y our motorized door or gate will open and close while you are training the universal transceiver . Do not train the transceiver if people, pets or other objects are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by Federal safety standards.
Place the handheld transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink 威 button you wish to pr ogram while keeping the indicator light in view .
This can usually be found where the hanging antenna wire is attached to the garage door opener motor . It is NOT the button normally used to open and close the door . 6. Firmly press and release the LEARN or TRAINING button. The name and color of the button may vary by manufacturer .
Using HomeLink 威 T o operate, press and r elease the programmed HomeLink 威 button. Activation will now occur for the trained device (i.e., garage door opener , gate operator , security system, entry door lock, home/office lighting, etc.,). The handheld transmitter of the device may also be used at any time.
successfully accepted the frequency signal. The indica- tor light will flash slowly and then rapidly when fully trained. If you unplugged the device for training, plug it back in at this time. Then proceed with Step 4 under “Pr ogramming HomeLink 威 ,” earlier in this section.
2. This device must accept any interference that may be received including interfer ence that may cause undesired operation. NOTE: • The transmitter has been tested and it complies with FCC and IC rules.
W ARNING! • Never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death.
V enting Sunroof — Express Press and r elease the “V ent” button, the sunroof will open to the vent position. This is called “Express V ent”. Closing Sunroof — Express Press the switch forwar d and release, the sunr oof will close automatically from any position.
Ignition Off Operation For vehicles not equipped with the Electronic V ehicle Information Center (EVIC), the power sunroof switch will remain active for 45 seconds after the ignition switch is turned OFF . Opening either front door will cancel this feature.
The center console power outlet is powered dir ectly from the battery (power available at all times). Items plugged into this power outlet may discharge the battery and/or prevent the engine fr om starting. NOTE: • T o ensure pr oper operation a MOP AR 威 knob and element must be used.
CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery , even when not in use (i.e., cellular phones, etc.). Eventually , if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting.
CAUTION! For vehicles equipped with the heated and cooled cupholder , locate the cup holder ash receiver in the forward cupholder . The optional ash receiver also comes with a cigar lighter .
Rear Seat Bottle Holder There ar e built-in bottle holders located in both rear door trim panels. W ARNING! If containers of hot liquid are placed in the bottle holder , they can spill when the door is closed, burn- ing the occupants. Be careful when closing the doors to avoid injury .
Cargo Area The 60/40 split-folding rear seat pr ovides cargo-carrying versatility . The seatbacks fold down easily by pulling nylon tabs between the seatbacks and the bolsters. When the seats are folded down, they pr ovide a continuous, nearly flat extension of the load floor .
W ARNING! (Continued) • T o help protect against personal injury , passengers should not be seated in the rear cargo area. The rear cargo space is intended for load carrying purposes only , not for passengers, who should sit in seats and use seat belts.
Dual Storage Bins Lifting a latch at the front of the hinged armr est provides access to these storage areas. The left latch opens to the top storage area.
The lower bin can be accessed directly , without first exposing the upper bin, by operating the right latch with the armrest down. The first storage bin can be used to hold smaller items. The lower storage bin includes a molded-in coin holder , room for CD’s, DVD’s, and a power outlet that allows a cellular phone to rechar ge while concealed.
Refer to “V ideo Entertainment System — If Equipped,” in “Understanding Y our Instrument Panel” for further information. REAR WINDOW FEA TURES Rear Window Defroster The rear window defr oster button is located on the climate control (Mode) knob.
CAUTION! (Continued) • Use care when washing the inside of the rear window . Do not use abrasive window cleaners on the interior surface of the window . Use a soft cloth and a mild washing solution, wiping parallel to the heating elements. Labels can be peeled off after soaking with warm water .
Inside the Chill Zone 威 is a vent which, when opened, allows either air conditioned or fresh air to flow into the Chill Zone 威 compartment. Depending on ambient tem- perature and A/C setting, the compartment can keep beverages cool. For Chill Zone 威 to operate properly , door must remain closed while vehicle is in operation.
.
UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instrument Panel Featur es ............... 1 4 7 䡵 Instrument Cluster — Base ............... 1 4 8 䡵 Instrument Cluster — Pr emium ........... 1 4 9 䡵 Instrument Cluster Descriptions .......
▫ List Button (Disc Mode For MP3/WMA Play) ......... 1 8 7 ▫ Info Button (Disc Mode For MP3/WMA Play) ......... 1 8 7 䡵 Media Center 730N/430 (RER/REN/RBZ) — AM/FM Stereo Radio And CD/DVD/HDD/ NA V — If Equipped .................... 1 9 0 ▫ Operating Instructions — V oice Command System — If Equipped .
▫ Info Button (CD Mode For MP3 Play) ...... 2 1 4 ▫ Operating Instructions - Uconnect™ Phone (If Equipped) ....................... 2 1 5 䡵 Uconnect™ Multimedia (Satellite Radio) — If Equipped (REN/REQ/RER/RBZ/RES Radios Only) .............
䡵 CD/DVD Disc Maintenance .............. 2 2 4 䡵 Radio Operation And Cellular Phones ....... 2 2 4 䡵 Climate Controls ...................... 2 2 4 ▫ Manual Heating And Air Conditioning ..... 2 2 5 ▫ Automatic T emperature Contr ol (A TC) — If Equipped .
INSTRUMENT P ANEL FEA TURES 1 — Air Outlet 5 — Beverage Can Cooler Bin 9 — Power Outlet 2 — Side W indow Demister Outlet 6 — Glove Compartment 10 — Climate Controls 3 — Instrument Cluste.
INSTRUMENT CLUSTER — BASE 148 UNDERST ANDING YOUR INSTRUMENT P ANEL.
INSTRUMENT CLUSTER — PREMIUM 4 UNDERST ANDING YOUR INSTRUMENT P ANEL 149.
INSTRUMENT CLUSTER DESCRIPTIONS 1. T emperature Gauge The temperature gauge shows engine coolant tempera- ture. Any reading below the r ed ar ea of the gauge shows that the engine cooling system is operating properly .
5. Low Fuel Light When the fuel level drops to appr oximately 2.0 gal- lons (7.6 Liters), the fuel symbol will light and a single chime will sound. NOTE: This light will remain on until a minimum of approximately 3.0 gallons of fuel is added. 6. Charging System Light This light shows the status of the electrical charg- ing system.
you do not buckle up, the light will remain on. Refer to “Occupant Restraints” in “Things T o Know Before Start- ing Y our V ehicle” for further information.
The light will remain on until the cause is corr ected. NOTE: The light may flash momentarily during sharp cornering maneuvers which change fluid level condi- tions. The vehicle should have service performed, and the brake fluid level checked. If brake failure is indicated, immediate r epair is neces- sary .
12. T achometer The silver area of the scale shows the permissible engine revolutions-per -minute (RPM x 1000) for each gear range. Before r eaching the red ar ea, ease up on the accelerator to prevent engine damage. 13. Shift Lever Indicator The Shift Lever Indicator is self-contained within the instrument cluster .
V ehicle Odometer Messages When the appropriate conditions exist, the odometer will display the following messages: door ............................. Door Ajar deck ............................. T runk Ajar LoW T irE .................... L o w T i r e P r essure CHAngE OIL .
tighten the fuel filler cap properly and pr ess the odom- eter reset button to turn of f the “gASCAP” message. (Refer to “Onboard Diagnostic System — OBDII” in “Maintaining Y our V ehicle” for further information). If the problem continues, the message will appear the next time the vehicle is started.
15. Cruise Indicator — If Equipped This indicator shows that the Electronic Speed Control System is ON. 16. Odometer/T rip Odometer Reset Button Single T rip Odometer Press and r elease this button to change the display from odometer to trip odometer .
If the light is flashing when the engine is running you may experience power loss, an elevated/rough idle, and increased brake pedal ef fort, and your vehicle may requir e towing. Immediate service is requir ed. The light will come on when the ignition switch is first turned on and remain on appr oximately 15 seconds as a bulb check.
22. Electronic Stability Control (ESC) Activation/ Malfunction Indicator Light — If Equipped The “ESC Activation/Malfunction Indicator Light” in the instrument cluster will come on when the ignition switch is turned to the ON position. It should go out with the engine running.
vehicle placard or tir e inflation pressur e label, you should determine the proper tir e inflation pressur e for those tires.) As an added safety feature, your vehicle has been equipped with a T ire Pressur e Monitoring System (TPMS) that illuminates a low tire pr essure telltale when one or more of your tir es is significantly under-inflated.
tires or wheels on your vehicle, to ensur e that the replacement or alternate tir es and wheels allow the TPMS to continue to function properly . CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle.
CAUTION! Prolonged driving with the MIL on could cause damage to the engine control system. It also could affect fuel economy and drivability . If the MIL is flashing, severe catalytic converter damage and power loss will soon occur . Immediate service is required.
should come on. If the light does not come on, have the system inspected by an authorized dealer . 27. T ransmission T emperature W arning Light — If Equipped This light indicates that the transmission fluid temperature is r unning hot. This may occur with severe usage, such as trailer towing.
ELECTRONIC VEHICLE INFORMA TION CENTER (EVIC) – IF EQUIPPED The Electronic V ehicle Information Center (EVIC) fea- tures a driver -interactive display that is located in the instrument cluster .
The system allows the driver to select information by pressing the following buttons on the instr ument panel switch bank located below the climate controls: Press and r elease the MENU button to advance the display to T rip Functions or Personal set- tings or to return to the default System status display .
• Left Rear T urn Signal Light Out (with a single chime) • Right Front T urn Signal Light Out (with a single chime) • Right Rear T urn Signal Light Out (with a single chime) • RKE (Remote Keyl.
2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. T urn the ignition switch to the LOCK position. NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary r epeat this procedur e.
• Distance T o Empty (DTE) Shows the estimated distance that can be traveled with the fuel remaining in the tank. This estimated distance is determined by a weighted average of the instantaneous and average fuel economy , according to the current fuel tank level.
Compass Display The compass heading indicates the direction the vehicle is facing. Press and r elease the compass button to display one of eight compass heading and the outside tempera- ture.
3. Press and release the STEP button until “Calibrate Compass Y es” displays in the EVIC. 4. Press and release the RESET button and the “CAL” indicator will quit flashing.
1. T urn the ignition switch to the ON position. Leave the shift lever in P ARK. 2. Press and release the MENU button until “Personal Settings” displays in the EVIC. 3. Pr ess and release the STEP button until “Compass V ariance” and the current V ariance V alue displays in the EVIC.
Auto Unlock on Exit When ON is selected and the transaxle is in the P ARK or NEUTRAL position, all doors will unlock when the driver’s door is opened.
Headlights W ith W ipers (A vailable with Auto Headlights Only) When ON is selected, and the headlight switch is in the AUTO position, the headlights will turn on appr oxi- mately 10 seconds after the wipers are turned on. The headlights will also turn off when the wipers ar e turned off if they wer e turned on by this feature.
Display ECO — If Equipped The “ECO” message is located in the EVIC, this message can be turned on or off. T o make your selection, press and release the FUNCTION SELECT button until “ON” or “OFF” appears. Display Units In The EVIC and odometer can be changed between English and Metric units of measure.
Power Switch/V olume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Press the ON/VOLUME contr ol knob a second time to turn off the radio. Electronic V olume Control The electronic volume contr ol turns continuously (360 degrees) in either dir ection without stopping.
Phone Button Uconnect™ Phone — If Equipped Press this button to operate the Uconnect™ Phone featur e (if equipped). Refer to “Uconnect™ Phone” in the Uconnect™ User Manual located on the DVD for further details.
R W/FF Pressing the R W (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next fr equency in the direction of the arr ows. This feature operates in AM, FM or Satellite (if equipped) frequencies. TUNE Control T urn the rotary TUNE/SCROLL control knob clockwise to increase or counter clockwise to decrease the fr equency .
or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be se- lected. Many radio stations do not currently br oadcast Music T ype information.
By pressing the SEEK button when the Music T ype icon is displayed, the radio will be tuned to the next frequency station with the same selected Music T ype name.
• Angle – Repeatedly pressing SELECT will change the viewing angle if supported by the DVD disc (if equipped). NOTE: • The available selections for each of the above entries varies depending upon the disc. • These selections can only be made while playing a DVD.
Audio Language — If Equipped Selecting this item allows you to choose a default audio language (effective only if the language is supported by the disc).
a disc is loaded, changes will not be effective. Also, the defaults are ef fective only if the disc supports the customer-pr eferred settings. AM and FM Buttons Press the buttons to select AM or FM mode.
Operation Instructions - (DISC MODE for CD and MP3/WMA Audio Play , DVD-VIDEO) The radio DVD player and many DVD discs are coded by geographic region. These r egion codes must match in order for the disc to play . If the region code for the DVD disc does not match the region code for the radio DVD player , it will not play the disc.
Eject Button — Ejecting Compact Disc(s) Press the EJECT button and the pushbutton with the corresponding number (1-6) wher e the CD was loaded and the disc will unload and move to the entrance for easy removal. Radio display will show ⬙ EJECTING DISC ⬙ when the disc is being ejected and prompt the user to r emove the disc.
Notes On Playing MP3/WMA Files The radio can play MP3/WMA files; however , acceptable MP3/WMA file r ecording media and formats ar e limited. When writing MP3/WMA files, pay attention to the following restrictions.
If a disc contains multi-formats, such as CD audio and MP3/WMA tracks, the radio will only play the MP3/ WMA tracks on that disc. Supported MP3/WMA File Formats The radio will recognize only files with the *.MP3/WMA extension as MP3/WMA files. Non-MP3/WMA files named with the *.
Playback of MP3/WMA Files When a medium containing MP3/WMA data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3/WMA files.
Press and hold the INFO button again for thr ee seconds to return to ⬙ elapsed time ⬙ display . Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack which allows.
Operating Instructions — V oice Command System (If Equipped) For the radio, Refer to “V oice Command” in the Uconnect™ User Manual located on the DVD for further details. Refer to the Uconnect™ User Manual located on the DVD for further details.
DTS™ ⬙ DTS™ ⬙ and ⬙ DTS™ 2.0 ⬙ are trademarks of Digital The- ater Systems, Inc. MEDIA CENTER 730N/430 (RER/REN/RBZ) — AM/FM STEREO RADIO AND CD/DVD/HDD/NA V — IF EQUIPPED NOTE: The sales code is located on the lower right side of the unit’s faceplate.
3. T o move the hour forward, touch the scr een where the word “Hour” with the arr ow pointing upward is dis- played. T o move the hour backward, touch the scr een where the wor d “Hour” with the arrow pointing down- ward is displayed.
Changing the T ime Zone 1. T urn on the radio. 2. T ouch the screen wher e the time is displayed. The clock setting menu will appear on the screen. 3. T ouch the screen wher e the words “Set T ime Zone” are displayed. The time zone selection menu will appear on the screen.
displayed. T o move the minute backward, touch the screen wher e the word “Min” with the arr ow pointing downward is displayed. 6. T o save the new time setting, touch the screen wher e the word “Save” is displayed. Changing Daylight Savings T ime When selected, this feature will display the time of day in daylight savings time.
3. T ouch the screen wher e “User Clock” is displayed, the clock setting menu will appear on the screen. 4. T ouch the screen wher e the words “Set T ime Zone” are displayed. The time zone selection menu will appear on the screen. 5. Select a time zone by touching the screen where your selection appears.
Power Switch/V olume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio. Electronic V olume Control The electronic volume contr ol turns continuously (360 degrees) in either dir ection, without stopping.
R W/FF Pressing the R W (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next fr equency in the direction of the arr ows. This feature operates in either AM or FM frequencies. TUNE Control T urn the rotary TUNE/SCROLL control knob clockwise to increase or counter clockwise to decrease the fr equency .
SET/RND Button — T o Set the Pushbutton Memory When you are r eceiving a station that you wish to commit to pushbutton memory , press the SET/RND button. The symbol SET 1 will now show in the display window . Select the button (1 to 6) you wish to lock onto this station and press and r elease that button.
discs (CD-R W), compact discs with MP3 tracks and multisession compact discs with CD and MP3 tracks. Inserting Compact Disc(s) Gently insert one CD into the CD player with the CD label facing up. The CD will automatically be pulled into the CD player and the CD icon will illuminate on the radio display .
If you have ejected a disc and have not removed it within 10 seconds, it will be reloaded. If the CD is not r emoved, the radio will reinsert the CD but will not play it. A disc can be ejected with the radio and ignition OFF . NOTE: Ejecting with the ignition OFF is not allowed on convertible or soft-top models (if equipped).
Notes on Playing MP3 Files The radio can play MP3 files; however , acceptable MP3 file recor ding media and formats are limited. When writing MP3 files, pay attention to the following restric- tions. Supported Media (Disc T ypes) The MP3 file recor ding media supported by the radio are CDDA, CD-R, CD-R W , MP3, and CDDA+MP3.
Discs created with an option such as ⬙ keep disc open after writing ⬙ are most likely multisession discs. The use of multisession for CD audio or MP3 playback may result in longer disc loading times. Supported MP3 File Formats The radio will recognize only files with the *.
Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files.
MEDIA CENTER 130 (RES/RSC) — AM/FM STEREO RADIO WITH CD PLA YER (MP3 AUX JACK) AND SIRIUS RADIO NOTE: The radio sales code is located on the lower right side of the radio faceplate. Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON/RUN or ACC position to operate the radio.
SEEK Buttons Press and r elease the SEEK buttons to search for the next listenable station in AM/FM mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection.
2. Adjust the hours by turning the right side TUNE/ SCROLL control knob. 3. After adjusting the hours, press the right side TUNE/ SCROLL control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side TUNE/ SCROLL control knob.
Push the rotary TUNE/SCROLL control knob a second time and MID will display . T urn the TUNE/SCROLL control knob to the right or left to incr ease or decrease the mid-range tones. Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display .
Program T ype 16-Digit Character Display College College Country Country Foreign Language Language Information Inform Jazz Jazz News News Nostalgia Nostalga Oldies Oldies Personality Persnlty Public P.
SETUP Button Pressing the SETUP button allows you to select between the following items: • Set Clock — Pressing the SELECT button will allow you to set the clock. Adjust the hours by turning the TUNE/SCROLL control knob. After adjusting the hours, press the TUNE/SCROLL control knob to set the minutes.
Button s1-6 These buttons tune the radio to the stations that you commit to pushbutton memory (12 AM and 12 FM stations). DISC/AUX Button Pressing the DISC/AUX button will allow you to switch from AM/FM modes to DISC/AUX mode.
CAUTION! (Continued) • Do not use adhesive labels. These labels can peel away and jam the player mechanism. • RES is a single CD player . Do not attempt to insert a second CD if one is already loaded. • Dual-media disc types (one side is a DVD, the other side is a CD) should not be used, and they can cause damage to the player .
AM/FM Button Press the button to select either AM or FM mode. SET/RND Button (Random Play Button) Press this button while the CD is playing to activate Random Play . This feature plays the selections on the compact disc in random order to pr ovide an interesting change of pace.
a number instead. W ith a maximum number of files, exceeding 20 folders will result in this display . W ith 200 files, exceeding 50 folders will result in this display .) • Maximum number of characters in file/folder names: • Level 1: 12 (including a separator ⬙ .
MPEG Specification Sampling Fre- quency (kHz) Bit Rate (kbps) MPEG-1 Au- dio Layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 1 12, 96, 80, 64, 56, 48, 40, 32 MPEG-2 Au- dio Layer 3 24, 22.
begin playing the files contained in that folder (or the next folder in sequence if the selection does not contain playable files). The folder list will time out after five seconds.
Operating Instructions - Uconnect™ Phone (If Equipped) Refer to “Uconnect™ Phone” in the Uconnect™ User Manual located on the DVD for further details.
Electronic Serial Number/Sirius Identification Number (ESN/SID) Please have the following information available when calling: 1. The Electronic Serial Number/Sirius Identification Number (ESN/SID).
Reception Quality Satellite reception may be interr upted due to one of the following reasons: • The vehicle is parked in an undergr ound parking structur e or under a physical obstacle. • Dense tree coverage may interr upt reception in the form of short audio mutes.
additional three seconds will make the radio display the Song T itle all of the time (press and hold again to return to normal display). R W/FF Pressing the R W (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next channel in the direction of the arr ows.
SET Button – T o Set the Pushbutton Memory When you are r eceiving a channel that you wish to commit to pushbutton memory , press the SET button. The symbol SET 1 will now show in the display window . Select the button (1-6) you wish to lock onto this channel and press and r elease that button.
VIDEO ENTERT AINMENT SYSTEM (VES)™ — IF EQUIPPED The optional V ideo Entertainment System (VES)™ in- cludes the following components for rear seat entertain- ment: • A diagonal 7 in (17.8 cm) Liquid Crystal Display (LCD) screen integrated into the center console armr est.
NOTE: Close the armrest after the LCD scr een has been raised to its viewing position. • The radio and DVD player controls allow fr ont seat operation for easy setup in the case of younger rear seat passengers. • A battery-powered infrar ed remote contr ol snaps into a molded compartment in the center console armrest upper storage bin.
Audio/V ideo RCA Jacks (AUX Jacks) on the rear of the center console enable the monitor to display video directly from a video camera, connect video games for display on the screen, or play music directly fr om an MP3 player . 1. V ideo in (yellow) 2.
Right-Hand Switch Functions • Press the top of the switch to incr ease the volume. • Press the bottom of the switch to decr ease the volume. • Press the button in the center of the switch to change modes (i.
CD/DVD DISC MAINTENANCE T o keep a CD/DVD in good condition, take the following precautions: 1. Handle the disc by its edge; avoid touching the surface. 2. If the disc is stained, clean the surface with a soft cloth, wiping from center to edge. 3. Do not apply paper or tape to the disc; avoid scratch- ing the disc.
Manual Heating and Air Conditioning The Manual T emperature Contr ols consist of a series of outer rotary dials and inner push knobs. Blower Control Rotate this control to r egulate the amount of air forced thr ough the ven- tilation system in any mode.
T emperature Control Rotate this control to r egulate the tem- perature of the air inside the passenger compartment. Rotating the dial left into the blue area of the scale indicates cooler temperatures while r otating right into the red ar ea indicates warmer temperatures.
NOTE: For all settings except full cold or full hot, there is a differ ence in temperature between the upper and lower outlets. The warmer air flows to the floor outlets.
NOTE: • Continuous use of the recir culation mode may make the inside air stuffy and window fogging may occur . Extended use of this mode is not recommended. • The use of the recir culation mode in cold or damp weather will cause windows to fog on the inside, because of moisture buildup inside the vehicle.
• ECONOMY MODE If economy mode is desired, pr ess the A/C button to turn OFF the indicator light and the A/C compressor . Then, move the temperature contr ol to the desired temperatur e.
the desired comfort level r equire air conditioning, the system will automatically make the adjustment. Y ou will experience the greatest ef ficiency by simply allowing the system to function automatically . Selecting the “O” (OFF) position on the blower control stops the system completely and closes the outside air intake.
Blower Control For full automatic operation or for automatic blower operation turn the knob to AUTO position. In manual mode there ar e seven blower speeds that can be individual selected.
232 UNDERST ANDING YOUR INSTRUMENT P ANEL.
The operator can override the AUTO mode setting to change airflow distribution by rotating the Mode Contr ol knob (on the right) to one of the following positions. • Panel Air is directed thr ough the outlets in the instrument panel. These outlets can be adjusted to direct airflow .
• Air Conditioner Control Press this button to turn on the air conditioning during manual operation only . When the air conditioning is turned on, cool dehumidified air will flow through the outlets selected with the Mode control dial. Pr ess this but- ton a second time to turn OFF the air conditioning.
• Most of the time, when in Automatic Operation, you can temporarily put the system into Recirculation Mode by pressing the Recir culation button. However , under certain conditions, while in Automatic Mode, the system is blowing air out the defrost vents.
W indow Fogging Interior fogging on the windshield can be quickly re- moved by turning the mode selector to Defrost. The Mix mode can be used to maintain a clear windshield and provide suf ficient heating. If side window fogging be- comes a problem, incr ease blower speed.
Control Setting Suggestions for V arious W eather Conditions 4 UNDERST ANDING YOUR INSTRUMENT P ANEL 237.
.
ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es .................... 2 4 3 ▫ Automatic T ransmission ............... 2 4 3 ▫ Normal Starting ..................... 2 4 3 ▫ Extreme Cold W eather (Below ⫺ 20°F Or ⫺ 29°C) ..........
▫ General Information .................. 2 5 4 䡵 Driving On Slippery Surfaces ............. 2 5 5 ▫ Acceleration ........................ 2 5 5 ▫ T raction ........................... 2 5 5 䡵 Driving Through W ater ................. 2 5 6 ▫ Flowing/Rising W ater .
▫ Compact Spare T ire ................... 2 8 5 ▫ T ire Spinning ....................... 2 8 6 ▫ T read W ear Indicators ................. 2 8 7 ▫ Life Of T ire ........................ 2 8 8 ▫ Replacement T ires .................... 2 8 8 䡵 T ire Chains .
▫ Fuel Requirements ................... 3 0 7 ▫ Selection Of Engine Oil For Flexible Fuel V ehicles (E85) And Gasoline V ehicles ...... 3 0 8 ▫ Starting ........................... 3 0 8 ▫ Cruising Range ...................... 3 0 8 ▫ Replacement Parts .
ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instr uct all other occupants to buckle their seat belts. W ARNING! Never leave children alone in a vehicle.
motor will continue to run, and it will disengage auto- matically when the engine is running. If the engine fails to start, the starter will disengage automatically in 10 sec- onds. If this occurs, turn the ignition switch to the LOCK position, wait 10 to 15 seconds, then repeat the “Normal Starting” procedur e.
the way to the floor and hold it there while cranking the engine. This should clear any excess fuel in case the engine is flooded. CAUTION! T o prevent damage to the starter , do not crank the engine for more than 15 seconds at a time. W ait 10 to 15 seconds before trying again.
ENGINE BLOCK HEA TER — IF EQUIPPED The engine block heater warms the engine, and permits quicker starts in cold weather . Connect the cord to a standard 1 10-1 15 V olt AC electrical outlet with a grounded, thr ee-wire extension cor d.
NOTE: Y ou MUST press and hold the brake pedal down while shifting out of P ARK. W ARNING! • It is dangerous to move the shift lever out of P ARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse.
W ARNING! (Continued) • Unintended movement of a vehicle could injure those in and near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, you should always shift the vehicle into P ARK, remove the key from the ignition, and apply the parking brake.
• Insert the ignition key and rotate it to the ON position • Remove the cup holder liner • Insert a key , screwdriver , or finger into the front hole then push and hold the manual override release lever forward. • While holding the release lever forwar d, move the shift lever from P ARK to NEUTRAL.
Never attempt to use P ARK while vehicle is in motion. Apply parking brake when leaving vehicle in this range. When parking on a flat surface, place the shift lever in the P ARK position first, and then apply the parking brake.
NEUTRAL This range is used when vehicle is standing for pro- longed periods with engine running. Engine may be started in this range. Set the parking brake if you must leave the vehicle. W ARNING! Do not coast in NEUTRAL and never turn of f the ignition to coast down a hill.
DRIVE 3— Four-Speed T ransmission This range eliminates shifts into fourth gear . The trans- mission will operate normally in first and second gear . Shifts into third may be delayed to pr ovide second gear operation at higher speeds. The ⬙ 3 ⬙ range should also be used when descending steep grades to prevent brake system distress.
In the event that the problem has been momentary , the transmission can be reset to r egain all forward gears. 1. Stop the vehicle. 2. Shift into P ARK. 3. T urn the ignition OFF , and restart the engine. 4. Shift into the desired gear range and resume driving.
AutoStick 威 is deactivated when the shift lever is shifted from the AutoStick (+/-) position into the DRIVE position. General Information • Y ou can start out, from a stop, in any gear except sixth. The system will ignore attempts to upshift at too low of a vehicle speed.
DRIVING ON SLIPPER Y SURF ACES Acceleration Rapid acceleration on snow covered, wet, or other slip- pery surfaces may cause the front wheels to pull errati- cally to the right or left. This phenomenon occurs when there is a dif ference in the surface traction under the fr ont (driving) wheels.
DRIVING THROUGH W A TER Driving through water mor e than a few inches/ centimeters deep will requir e extra caution to ensure safety and prevent damage to your vehicle. Flowing/Rising W ater W ARNING! Do not drive on or across a road or path where water is flowing and/or rising (as in storm run-off).
CAUTION! (Continued) • Driving through standing water may cause dam- age to your vehicle’ s drivetrain components. Al- ways inspect your vehicle’ s fluids (i.e., engine oil, transmission, axle, etc.) for signs of contamination (i.e., fluid that is milky or foamy in appearance) after driving through standing water .
POWER STEERING The standard power steering system will give you good vehicle response and incr eased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason the power assist is interr upted, it will still be possible to steer your vehicle.
Power Steering Fluid Check Checking the power steering fluid level at a defined service interval is not requir ed. The fluid should only be checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as antici- pated.
The parking brake lever is located in the center console. T o apply the parking brake, pull the lever up as firmly as possible. T o release the parking brake, pull the lever up slightly , press the center button, then lower the lever completely .
make it difficult to move the shift lever out of P ARK. The parking brake should always be applied whenever the driver is not in the vehicle. W ARNING! • Never use the P ARK position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage.
ANTI-LOCK BRAKE SYSTEM (ABS) The Anti-Lock Brake System (ABS) provides incr eased vehicle stability and brake performance under most braking conditions. The system operates with a separate computer to modulate the hydraulic pressur e to prevent wheel lock-up and avoid skidding on slippery surfaces.
The “Anti-Lock Brake W arning Light” moni- tors the Anti-Lock Brake System. The light will come on when the ignition switch is turned to the ON position and may stay on for as long as four seconds.
• the clicking sound of solenoid valves, • brake pedal pulsations, • and a slight drop or fall away of the brake pedal at the end of the stop. These are all normal characteristics of ABS.
help avoid skidding on slippery surfaces during braking. Refer to “Anti-Lock Brake System” in “Starting and Operating” for further information. T raction Control System (TCS) This system monitors the amount of wheel spin of each of the driven wheels.
W ARNING! • The BAS cannot prevent the natural laws of phys- ics from acting on the vehicle, nor can it increase braking efficiency beyond that af forded by the condition of the vehicle brakes and tires or the traction afforded.
HSA Activation Criteria The following criteria must be met in order for HSA to activate: • V ehicle must be stopped • V ehicle must be on a 7% or greater incline • Gear selection matches vehicle uphill direction (i.e., vehicle facing uphill is in forward gear; vehicle back- ing uphill is in REVERSE gear).
1. Center the steering wheel (front wheels pointing straight forward). 2. Shift the transmission into NEUTRAL. 3. Apply the parking brake. 4. Start the engine. 5. Release the clutch pedal. 6. Rotate the steering wheel one-half turn to the left. 7. Press the “ESC Off” switch four times within 20 sec- onds.
Electronic Stability Control (ESC) This system enhances directional contr ol and stability of the vehicle under various driving conditions. ESC cor- rects for over/under steering of the vehicle by applying the brake of the appropriate wheel to assist in counter - acting the over/under steer condition.
W ARNING! (Continued) • ESC cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning.
ESC Operating Modes All ESC equipped vehicles can choose the following ESC operating modes: ESC On This is the normal operating mode for ESC. Whenever the vehicle is started the ESC system will be in this mode. This mode should be used for almost all driving situa- tions.
W ARNING! In the Partial ESC mode, the engine torque reduction and stability features are desensitized. Therefore, the enhanced vehicle stability offered by ESC is unavail- able.
NOTE: • P (Passenger) - Metric tir e sizing is based on U.S. design standards. P-Metric tir es have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. • European-Metric tir e sizing is based on European design standards.
T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standar ds ⴖ ....blank.... ⴖ = Passenger car tire based on Eur opean design standards LT = Light truck tir e based on U.
EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can ca.
Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however , the date code may only be on one side. T ires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire.
Tire T erminology and Definitions T erm Definition B-Pillar The vehicle B-Pillar is a structural member of the body located between the front and r ear door (of a four-door vehicle) r unning from the sill to the r oof.
Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressur e is listed on the driver’s side B-Pillar . T ire and Loading Information Placard T ire Placard L.
This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) tire size designed for your vehicle 4) cold tire inflation pr essures for the fr ont, rear , and spare tir es.
3. Subtract the combined weight of the driver and pas- sengers from XXX lbs or XXX kg. 4. The resulting figure equals the available amount of cargo and luggage load capacity .
5 ST ARTING AND OPERA TING 281.
W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle.
W ARNING! (Continued) • Unequal tire pressures from one side of the ve- hicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy Improper inflation pr essures can cause uneven wear patterns to develop across the tir e tread.
CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressur es specified on the placard ar e always “cold tire inflation pr essure.
loading may be requir ed for high-speed vehicle opera- tion. Refer to original equipment or an authorized tire dealer for recommended safe operating speeds, loading and cold tire inflation pr essures. W ARNING! High speed driving with your vehicle under maxi- mum load is dangerous.
W ARNING! T emporary use spare tires are for emergency use only . W ith these tires, do not drive more than 50 mph (80 km/h). T emporary-use spare tires have limited tread life. When the tread is worn to the tread wear indicators, the temporary use spare tire needs to be replaced.
Refer to “Freeing A Stuck V ehicle” in “What T o Do In Emergencies” for further information. W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure some- one.
Life of Tire The service life of a tire is dependent upon varying factors including but not limited to: • Driving style • T ire pressur e • Distance driven W ARNING! T ires and spare tire should be replaced after six years, regardless of the remaining tread.
W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle.
CAUTION! Damage to the vehicle may result if tire chains are used. SNOW TIRES Some areas of the country r equire the use of snow tir es during W inter . Standard tires ar e of the all-season type and satisfy this requir ement as indicated by the M+S designation on the tire sidewall.
TIRE PRESSURE MONITOR SYSTEM (TPMS) The T ire Pressur e Monitor System (TPMS) will warn the driver of a low tire pr essure based on the vehicle r ecom- mended cold placard pr essure. The tire pr essure will vary with temperatur e by about 1 psi (7 kPa) for every 12 F (7 C).
The TPM System will continue to warn the driver of low tire pr essure as long as the condition exists, and will not turn off until the tir e pressur e is at or above the recom- mended cold placard pr essure.
CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when us- ing replacement equipment that is not of the same size, type, and/or style.
• Seasonal temperature changes will af fect tire pr essure, and the TPMS will monitor the actual tire pr essure in the tire. Base System The T ire Pressur e Monitor System (TPMS) uses wireless technology with wheel rim mounted electronic sensors to monitor tire pr essure levels.
will repeat, pr oviding the system fault still exists. The “T ire Pressur e Monitoring T elltale Light” will turn off when the fault condition no longer exists. A system fault can occur due to any of the following: 1. Jamming due to electronic devices or driving next to facilities emitting the same Radio Frequencies as the TPM sensors.
5. Once you repair or replace the original r oad tire, and reinstall it on the vehicle in place of the compact spar e, the TPMS will update automatically and the “TPM T elltale Light” will turn OFF , as long no tire pressur e is below the low-pressur e warning limit in any of the four active road tir es.
more of the four active r oad tires. In addition, the Electronic V ehicle Information Center (EVIC) will display a graphic showing the pressur e values of each tire with the low tire pr essure values flashing.
(- -) in place of the pressur e value to indicate which sensor is not being received. If the ignition key is cycled, this sequence will repeat, providing the system fault still exists.
2. If you install the compact spare tire in place of a r oad tire that has a pr essure below the low-pr essure warning limit, upon the next ignition key cycle, the “TPM T elltale Light” will remain ON, a chime will sound, and the EVIC will still display a flashing pressur e value in the graphic display .
The tire pr essure sensors ar e covered under one of the following licenses: United States ..................... KR5S120123 Canada ....................
symptoms, try another brand of gasoline (with the ap- propriate octane rating for your engine) befor e consider- ing service for the vehicle. Over 40 automobile manufacturers ar ound the world have is.
NOTE: The 2.7L engine is now rated for E85 Ethanol use (EXCEPT CALIFORNIA EMISSION ST A TES). Only vehicles with the E-85 fuel filler door label can operate on E-85. Refer to “Flexible Fuel” in “Starting and Operating” for further information.
blended with MMT provides no performance advantage beyond gasoline of the same octane number without MMT . Gasoline blended with MMT reduces spark plug life and reduces emission system performance in some vehicles. The manufacturer r ecommends that gasoline without MMT be used in your vehicle.
CAUTION! (Continued) • An out-of-tune engine, or certain fuel or ignition malfunctions, can cause the catalytic converter to overheat. If you notice a pungent burning odor or some light smoke, your engine may be out of tune or malfunctioning and may require immediate service.
W ARNING! (Continued) • Guard against carbon monoxide with proper maintenance. Have the exhaust system inspected every time the vehicle is raised. Have any abnor- mal conditions repaired promptly . Until repaired, drive with all side windows fully open.
NOTE: The 2.7L engine is now rated for E85 Ethanol use (EXCEPT CALIFORNIA EMISSION ST A TES). Only vehicles with the E85 fuel filler door label can operate on E85.
Ethanol Fuel (E85) E85 is a mixture of appr oximately 85% fuel ethanol and 15% unleaded gasoline. W ARNING! Ethanol vapors are extremely flammable and could cause serious personal injury . Never have any smok- ing materials lit in or near the vehicle when remov- ing the fuel filler tube cap (gas cap) or filling the tank.
• Some additives used in regular gasoline ar e not fully compatible with E85 and may form deposits in your engine. T o eliminate driveability issues that may be caused by these deposits, a supplemental gasoline additive, such as MOP AR 威 Injector Cleanup or T echron may be used.
Replacement Parts Many components in your Flexible Fuel V ehicle (FFV) are designed to be compatible with ethanol. Always be sure that your vehicle is serviced with correct ethanol com- patible parts. CAUTION! Replacing fuel system components with non-ethanol compatible components can damage your vehicle.
After removing the gas cap, place the gas cap tether cable over a hook on the inside of the fuel door . This keeps the gas cap suspended away from and pr otects the vehicle’s surface. NOTE: If the gas cap is lost or damaged, be sure the replacement cap is for use with this vehicle.
W ARNING! (Continued) • Never add fuel when the engine is running. This is in violation of most state and federal fire regula- tions and doing so will cause the MIL to turn on. • A fire may result if gasoline is pumped into a portable container that is inside of a vehicle.
The label contains the following information: • Name of manufacturer • Month and year of manufacture • Gross V ehicle W eight Rating (GVWR) • Gross Axle W eight Rating (GA WR) front • Gross .
Overloading The load carrying components (axle, springs, tires, wheels, etc.) of your vehicle will provide satisfactory service as long as you do not exceed the GVWR and front and rear GA WR. The best way to figure out the total weight of your vehicle is to weigh it when it is fully loaded and ready for operation.
T o maintain warranty coverage, follow the requir ements and recommendations in this manual concerning ve- hicles used for trailer towing. If you have any questions or concerns after reviewing this section, please consult your dealer to for full details on the towing capabilities of the vehicle.
Gross Axle W eight Rating (GA WR) The GA WR is the maximum capacity of the front and r ear axles. Distribute the load over the front and r ear axles evenly . Make sure that you do not exceed either front or rear GA WR. Refer to “V ehicle Loading/V ehicle Certifica- tion Label” in “Starting and Operating” for further information.
T railer Hitch Classification The following chart provides the industry standar d for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition.
T railer T owing Weights (Maximum T railer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Maximum T railer W eight Ratings Engine/T ransmission Max. Frontal Area Max. GTW (Gross T railer Wt.
CAUTION! T owing a trailer with a larger than recommended frontal area could cause the engine to overheat or cause severe engine damage under extreme condi- tions. T railer and T ongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer .
NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or authorized dealer-installed options, must be considered as part of the total load on your vehicle.
W ARNING! Improper towing can lead to an injury accident. Follow these guidelines to make your trailer towing as safe as possible: • Make certain that the load is secured in the trailer and that it will not shift during travel.
W ARNING! (Continued) 3. GA WR 4. T railer tongue weight rating for the trailer hitch utilized (This requirement may limit the ability to always achieve 10% of trailer tongue weight as a percentage of total trailer weight). T owing Requirements – T ires • Do not attempt to tow a trailer while using a compact spare tir e.
• An electronically actuated trailer brake contr oller is requir ed when towing a trailer with electronically actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electr onic brake controller is not r equired.
T owing Tips Before setting out on a trip, practice turning, stopping, and backing the trailer in an area located away fr om heavy traffic. Make sure all trailer and vehicle lights ar e working properly — including hazar d flashers. Automatic T ransmission The DRIVE range can be selected when towing.
• Use speed control in flat terrain and with light loads to maximize fuel efficiency . Cooling System T o reduce potential for engine and transmission over - heating, take the following actions: • City Driving When stopped for short periods of time, shift the trans- mission into NEUTRAL and increase engine idle speed.
WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flasher ................ 3 2 7 䡵 If Y our Engine Overheats ................ 3 2 7 ▫ Engine Oil Overheating (2.4L Engine Only) — If Equipped ........ 3 2 8 䡵 Jacking And T ire Changing ..
䡵 T owing A Disabled V ehicle ............... 3 4 1 ▫ T owing W ith The Ignition Key ........... 3 4 1 ▫ T owing W ithout The Ignition Key ........ 3 4 2 ▫ T owing This V ehicle Behind Another V ehicle ..................... 3 4 2 ▫ T owing This V ehicle Behind Another V ehicle W ith A T ow Dolly .
HAZARD W ARNING FLASHER The Hazard W arning flasher switch is located on the instrument panel, below the radio. Press the switch to turn on the Hazar d W arning flasher . When the switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emer gency .
NOTE: There ar e steps that you can take to slow down an impending overheat condition: • If your air conditioner (A/C) is on, turn it off. The A/C system adds heat to the engine cooling system and turning the A/C off can help r emove this heat.
JACKING AND TIRE CHANGING W ARNING! • Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. Y ou could be crushed. Never put any part of your body under a vehicle that is on a jack. Never start or run the engine while the vehicle is on a jack.
Preparations For Jacking 1. Park the vehicle on a firm, level surface. A void ice or slippery areas. W ARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough of f the road to avoid the danger of being hit when operating the jack or changing the wheel.
W ARNING! (Continued) • Always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle. • Block the wheel diagonally opposite the wheel to be raised. • Set the parking brake firmly and set an automatic transmission in P ARK; a manual transmission in REVERSE.
NOTE: The jack handle attaches to the side of the jack with two attachment points. When the jack is partially expanded, the tension between the two attachment points holds the jack handle in place. 2. Loosen, but do not remove, the wheel nuts by turning them to the left one turn while the wheel is still on the ground.
4. T urn the jack screw to the left until the jack can be placed under the jacking location. Once the jack is positioned, turn the jack screw to the right until the jack head is properly engaged with the lift ar ea closest to the wheel to be changed. Do not raise the vehicle until you are sur e the jack is securely engaged.
W ARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 5. Raise the vehicle by turning the jack screw to the right, using the swivel wrench.
W ARNING! A loose tire or jack thrown forward in a collision or hard stop could endanger the occupants of the ve- hicle. Always stow the jack parts and the spare tire in the places provided. 10. Place the deflated (flat) tire in the cargo ar ea and have the tire repaired or replaced as soon as possible.
W ARNING! Do not attempt jump-starting if the battery is frozen. It could rupture or explode and cause personal injury . Preparations for Jump-Start The battery in your vehicle is located between the left front headlight assembly and the left fr ont wheel splash shield.
W ARNING! • T ake care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is on. Y ou can be injured by moving fan blades. • Remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact.
W ARNING! Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result. Jump-Starting Procedure W ARNING! Failure to follow this procedure could result in per- sonal injury or property damage due to battery ex- plosion.
5. Start the engine in the vehicle that has the booster battery , let the engine idle a few minutes, and then start the engine in the vehicle with the discharged battery . Once the engine is started, remove the jumper cables in the reverse sequence: 6.
front wheels. Then shift back and forth between RE- VERSE and FIRST gear . Using minimal accelerator pedal pressur e to maintain the rocking motion, without spin- ning the wheels, is most effective. NOTE: If your vehicle is equipped with Electronic Stability Control (ESC), turn the system to Partial OFF before attempting to “r ock” the vehicle.
TOWING A DISABLED VEHICLE T owing With The Ignition Key Front Wheel Drive Y our vehicle may be towed (with all four wheels flat on the ground), under the following conditions: • The shift lever must be in NEUTRAL. • The distance to be traveled must not exceed 15 miles (25 km).
If you must use the accessories (wipers, defrosters, etc.) while being towed, the key must be in the ON position, not the ACC position. Make certain the transaxle remains in NEUTRAL. T owing Without The Ignition Key Special care must be taken when the vehicle is towed with the ignition in the LOCK position.
T owing Without Power — Override T ransaxle Interlock System Special care must be taken when the vehicle is towed with the ignition in the LOCK position. A dolly should be used under the front wheels if the r ear wheels are raised. Proper towing equipment is necessary to pr event dam- age to the vehicle.
.
MAINT AINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 2.4L ............. 3 4 7 䡵 Engine Compartment — 2.7L ............. 3 4 8 䡵 Engine Compartment — 3.5L ............. 3 4 9 䡵 Onboard Diagnostic System — OBD II ...... 3 5 0 ▫ Loose Fuel Filler Cap Message .
▫ Adding W asher Fluid ................. 3 6 4 ▫ Exhaust System ..................... 3 6 4 ▫ Cooling System ..................... 3 6 7 ▫ Brake System ....................... 3 7 2 ▫ Automatic T ransmission ............... 3 7 4 ▫ Appearance Care And Protection From Corrosion .
ENGINE COMP ARTMENT — 2.4L 1 — Engine Coolant Reservoir 7 — Air Cleaner Filter 2 — Power Steering Fluid Reservoir 8 — Engine Oil Fill 3 — Automatic T ransmission Dipstick 9 — Coolant Pre.
ENGINE COMP ARTMENT — 2.7L 1 — Engine Coolant Reservoir 7 — Power Distribution Center 2 — Coolant Pressur e Cap 8 — Air Cleaner Filter 3 — Power Steering Fluid Reservoir 9 — Engine Oil D.
ENGINE COMP ARTMENT — 3.5L 1 — Engine Coolant Reservoir 6 — Air Cleaner Filter 2 — Coolant Pressur e Cap 7 — Engine Oil Dipstick 3 — Power Steering Fluid Reservoir 8 — Engine Oil Fill 4 .
ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated Onboard Diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems.
the gas cap is properly tightened. Pr ess the trip odometer “Reset” button to turn off the message. If the pr oblem persists, the message will appear the next time the vehicle is started. This might indicate a damaged cap. If the problem is detected twice in a r ow , the system will turn on the “Malfunction Indicator Light (MIL).
4. Approximately 15 seconds later , one of two things will happen: a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition or start the engine. This means that your vehicle’s OBD II system is not ready and you should not proceed to the I/M station.
DEALER SERVICE Y our authorized dealer has the qualified service person- nel, special tools, and equipment to perform all service operations in an expert manner . Service Manuals are available which include detailed service information for your vehicle.
CAUTION! (Continued) • Y our vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or air condi- tioning.
CAUTION! Do not overfill the engine. Overfilling the engine will cause oil aeration, which can lead to loss of oil pressure and an increase in oil temperature. This could damage your engine. Change Engine Oil The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance.
CAUTION! Do not use chemical flushes in your engine oil as the chemicals can damage your engine. Such damage is not covered by the New V ehicle Limited W arranty . Engine Oil V iscosity (SAE Grade) – 2.4L and 2.7L Engines SAE 5W -20 engine oil is recommended for all operating temperatures.
Lubricants which do not have both, the engine oil certi- fication mark and the correct SAE viscosity grade num- ber should not be used. Synthetic Engine Oils Y ou may use synthetic engine oils provided the r ecom- mended oil quality requir ements are met, and the r ecom- mended maintenance intervals for oil and filter changes are followed.
Engine Air Cleaner Filter W ARNING! The air induction system (air cleaner , hoses, etc.) can provide a measure of protection in the case of engine backfire. Do not remove the air induction system (air cleaner , hoses, etc.) unless such removal is necessary for repair or maintenance.
W ARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area imme- diately with large amounts of water .
Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test.
Refrigerant Recovery and Recycling R-134a air conditioning refrigerant is a hydr ofluoro- carbon (HFC) that is endorsed by the Environmental Protection Agency and is an ozone-saving product.
5. Disengage the two retaining tabs that secure the filter cover to the HV AC housing and remove the cover . 6. Remove the A/C Air Filter by pulling it straight out of the housing. 7. Install the A/C Air Filter with the arrow on the filter pointing toward the floor .
quiet, easy operation and to protect against r ust and wear . Prior to the application of any lubricant, the parts concerned should be wiped clean to remove dust and grit; after lubricating excess oil and grease should be removed. Particular attention should also be given to hood latching components to ensure pr oper function.
present please pr oceed to clean wiper blades with humid cloth removing any debris that may be af fecting its function. Adding W asher Fluid The fluid reservoir for the windshield washers is located in the engine compartment. Be sure to check the fluid level in the reservoir at r egular intervals.
W ARNING! • Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. T o avoid breathing CO, refer to “Safety T ips/Exhaust Gas” in “Things T o Know Before Starting Y our V ehicle” for further information.
Under normal operating conditions, the catalytic con- verter will not requir e maintenance. However , it is im- portant to keep the engine properly tuned to assur e proper catalyst operation and pr event possible catalyst damage. NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you.
Cooling System W ARNING! • When working near the radiator cooling fan, dis- connect the fan motor lead or turn the ignition switch to the LOCK position. The fan is tempera- ture controlled and can start at anytime the igni- tion switch is in the ON position.
Selection Of Coolant Use only the manufacturer’s r ecommended coolant. Re- fer to “Fluids, Lubricants, and Genuine Parts” in “Main- taining Y our V ehicle” for further information.
replacement. T o prevent reducing this extended mainte- nance period, it is important that you use the same engine coolant (antifreeze) thr oughout the life of your vehicle. Please review these r ecommendations for using Hybrid Organic Additive T echnology (HOA T) engine coolant (antifreeze).
W ARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety pre- caution. Never add engine coolant (antifreeze) when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system.
The radiator normally remains completely full, so ther e is no need to remove the radiator cap unless checking for engine coolant (antifreeze) fr eeze point or replacing cool- ant. Advise your service attendant of this. As long as the engine operating temperature is satisfactory , the coolant bottle need only be checked once a month.
• Make sure that the radiator and coolant r ecovery bottle overflow hoses are not kinked or obstr ucted. • Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, keep the front of the condenser clean. • Do not change the thermostat for Summer or W inter operation.
Clean the top of the master cylinder area befor e removing the cap. If necessary , add fluid to bring the fluid level up to the requir ements described on the brake fluid reser - voir . Overfilling of fluid is not recommended because it may cause leaking in the system.
W ARNING! (Continued) • T o avoid contamination from foreign matter or moisture, use only new brake fluid or fluid that has been in a tightly closed container . Keep the master cylinder reservoir cap secured at all times. Brake fluid in a open container absorbs moisture from the air resulting in a lower boiling point.
Fluid Level Check – 2.4L and 2.7L Engines Use the following procedur e to check the automatic transmission fluid level properly: 1. Park the vehicle on level ground. 2. Run the engine at curb idle speed for a minimum of 60 seconds. 3. Apply the parking brake fully .
CAUTION! • Using a transmission fluid other than the manu- facturer’s recommended fluid may cause deterio- ration in transmission shift quality and/or torque converter shudder . Using a transmission fluid other than that recommended by the manufacturer will result in more frequent fluid and filter changes.
CAUTION! Do not use chemical flushes in your transmission as the chemicals can damage your transmission compo- nents. Such damage is not covered by the New V ehicle Limited W arranty .
W ashing • W ash your vehicle regularly . Always wash your ve- hicle in the shade using MOP AR 威 Car W ash or equiva- lent, or a mild car wash soap, and rinse the panels completely with clear water .
• If you detect any stone chips or scratches in the paint, touch them up immediately . The cost of such repairs is considered the r esponsibility of the owner . • If your vehicle is damaged due to an accident or similar cause which destroys the paint and pr otective coating, have your vehicle repair ed as soon as pos- sible.
T o minimize the possibility of scratching the lenses and reducing light output, avoid wiping with a dry cloth. T o remove r oad dirt, wash with a mild soap solution fol- lowed by rinsing. Do not use abrasive cleaning components, solvents, steel wool or other aggressive material to clean the lenses.
if absolutely necessary . Do not use harsh cleaners or Armor All 威 . Use MOP AR 威 T otal Clean or equivalent to clean vinyl upholstery . Cleaning Leather Upholstery MOP AR 威 T otal Clean or equivalent is specifically recom- mended for leather upholstery .
Cleaning Plastic Instrument Cluster Lenses The lenses in front of the instr uments in this vehicle are molded in clear plastic. When cleaning the lenses, care must be taken to avoid scratching the plastic. 1. Clean with a wet, soft rag. A mild soap solution may be used, but do not use high alcohol content or abrasive cleaners.
FUSES T otally Integrated Power Module (TIPM) The TIPM is located in the engine compartment near the air cleaner assembly . This center contains cartridge fuses and mini fuses. A label that identifies each component may be printed on the inside of the cover .
Cavity Cartridge Fuse Mini Fuse Description 6 — 10 Amp Red Ignition Off Draw (IOD) – Power Mirror Switch/Climate Controls 7— 30 Amp Green Ignition Off Draw (IOD) Sense 1 8— 30 Amp Green Igniti.
Cavity Cartridge Fuse Mini Fuse Description 15 40 Amp Green — Battery Feed – Radiator Fan Relay 16 — 15 Amp Lt. Blue IGN Run/ACC – Cigar Lighter/ PWR Sunroof Mod 17 — 10 Amp Red Ignition Off.
Cavity Cartridge Fuse Mini Fuse Description 24 — 25 Amp Natural Battery Feed — PWR Sunroof Feed 25 — 10 Amp Red Ignition Run — Heated Mirrors - If Equipped 26 — 15 Amp Lt.
Cavity Cartridge Fuse Mini Fuse Description 33 — 10 Amp Red Battery Feed – Switch Bank/ Diagnostic Link Connector/ Powertrain Control Module (PCM) 34 30 Amp Pink — Battery Feed – Anti-Lock Bra.
CAUTION! • When installing the T otally Integrated Power Module cover , it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the T otally Integrated Power Module, and possibly result in an electrical system failure.
LIGHT BULBS – Exterior Bulb No. Low Beam Headlamp ..................... H 1 1 High Beam Headlamp .................... 9005 Front Park/T urn Signal/Side Marker Lamp .... 3757A Front Fog Lamp ...................... PSX24W Center High Mounted Stop (CHMSL) Lamp .
3. Rotate bulb and connector 1 ⁄ 4 turn and pull outward from assembly . CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. 4. Pull the bulb out of the socket and replace the bulb. 5. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol.
Fog Lamps 1. Access to the lamps through the lower fascia cutout is limited. 2. T urn the steering wheel to allow access and remove the inner fender shield. 3. Rotate the bulb and connector 1 ⁄ 4 turn counterclock- wise. 4. Pull the bulb off of connector and replace with a new one.
T aillamps, Rear T urn Signals and Backup Lamps The turn signal, brake, taillamps and backup lamps are located in the rear corner body panel housing. 1. Open the trunk and gently pull back the trunk liner behind the taillamp. 2. Remove the two plastic wing nuts from the taillamp housing.
3. Grasp the taillamp and pull firmly outward pushing gently on the studs from inside to disengage the lamp housing. 4. T wist and remove socket fr om lamp.
License Plate Lamp 1. Remove two retaining screws holding the light lens in place. 2. Gently pry the lamp assembly loose. 3. Pull bulb from socket, replace and r eattach the lamp assembly with the two retaining scr ews. Center High-Mounted Stop Lamp 1.
3. Replace the bulb and reinstall the socket into the housing by locking it in place with a twist. 7 MAINT AINING YOUR VEHICLE 395.
FLUID CAP ACITIES U.S. Metric Fuel (Approximate) All Engines — (Except 2.4L PZEV) 16.9 Gallons 64 Liters 2.4L PZEV (Partial Zero Emissions V ehicle) 18.5 Gallons 70 Liters Engine Oil with Filter 2.4L Engine (SAE 5W -20, API Certified) 4.5 Quarts 4.4 Liters 2.
FLUIDS, LUBRICANTS, AND GENUINE P ARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hy- brid Organic Additive T echnology) or equivalent. Engine Oil – 2.4L and 2.
Component Fluid, Lubricant, or Genuine Part Fuel Selection – 2.4L and 2.7L En- gines 87 Octane Fuel Selection – 3.5L Engine 87 Octane Acceptable – 89 Octane Recommended * PZEV = Partial Zero Emi.
MAINTENANCE SCHEDULES CONTENTS 䡵 Emissions Control System Maintenance ...... 4 0 0 䡵 Maintenance Schedule .................. 4 0 0 ▫ Required Maintenance Intervals .
EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type must be done at the times or mileages specified to ensure the continued proper functioning of the emissions contr ol system.
NOTE: • The oil change indicator message will not monitor the time since the last oil change. Change your vehicles oil if it has been six months since your last oil change even if the oil change indicator message is NOT illumi- nated. • Change your engine oil more often if you drive your vehicle off-r oad for an extended period of time.
Once a Month • Check tire pr essure and look for unusual wear or damage. • Inspect the battery and clean and tighten the terminals as requir ed. • Check the fluid levels of coolant reservoir , brake master cylinder , and transmission and add as needed.
6,000 Miles (10,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 12,000 Miles (20,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
18,000 Miles (30,000 km) or 18 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 24,000 Miles (40,000 km) or 24 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
30,000 Miles (50,000 km) or 30 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the spark plugs (2.4L Engine except PZEV*). ❏ Adjust parking brake on vehicles equipped with four wheel disc brakes.
42,000 Miles (70,000 km) or 42 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 48,000 Miles (80,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
54,000 Miles (90,000 km) or 54 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 60,000 Miles (100,000 km) or 60 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
66,000 Miles (1 10,000 km) or 66 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 72,000 Miles (120,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
78,000 Miles (130,000 km) or 78 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 84,000 Miles (140,000 km) or 84 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
90,000 Miles (150,000 km) or 90 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the spark plugs (2.4L Engine except PZEV*). ❏ Inspect and replace the PCV valve, if necessary†.
102,000 Miles (170,000 km) or 102 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the spark plugs (2.4L PZEV*, 2.7L and 3.5L Engines). ❏ Replace the timing belt (3.5L Engine). ❏ Flush and replace the engine coolant.
1 14,000 Miles (190,000 km) or 1 14 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 120,000 Miles (200,000 km) or 120 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
126,000 Miles (210,000 km) or 126 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 132,000 Miles (220,000 km) or 132 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
138,000 Miles (230,000 km) or 138 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 144,000 Miles (240,000 km) or 144 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
150,000 Miles (250,000 km) or 150 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the spark plugs (2.4L Engine except PZEV*). ❏ Adjust parking brake on vehicles equipped with four wheel disc brakes.
* PZEV = Partial Zero Emission V ehicle † This maintenance is recommended by the manufactur er to the owner , but is not requir ed to maintain emissions warranty . W ARNING! • Y ou can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment.
IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V ehicle .............................. 4 1 9 ▫ Prepar e For The Appointment ........... 4 1 9 ▫ Prepar e A List ...................... 4 1 9 ▫ Be Reasonable W ith Requests .
䡵 Department Of T ransportation Uniform T ir e Quality Grades ........................ 4 2 5 ▫ T readwear ......................... 4 2 5 ▫ T raction Grades .
SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty .
This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this process. • If for some reason you ar e still not satisfied, talk to the general manager or owner of the authorized dealer- ship.
Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its customer center .
W e appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you ar e absolutely delighted with the ownership experience.
If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may or der a recall and r emedy campaign. However , NHTSA cannot become involved in individual problems between you, your authorized dealer , and the manufacturer .
vehicle, system, and/or components is written in straightforward language with illustrations, diagrams, and charts. • Diagnostic Procedure Manuals Diagnostic Procedur e Manuals are filled with dia- grams, charts and detailed illustrations.
DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following tire grading categories wer e established by the National Highway T raffic Safety Administration. The specific grade rating assigned by the tire’s manufactur er in each category is shown on the sidewall of the tires on your vehicle.
T emperature Grades The temperature grades ar e A (the highest), B, and C, repr esenting the tire’s r esistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel.
INDEX 10.
About Y our Brakes ....................... 2 5 9 ABS (Anti-Lock Brake System) .............. 2 6 2 Adding Engine Coolant (Antifreeze) .......... 3 6 8 Adding Fuel ........................... 3 0 9 Adding W asher Fluid ..................... 3 6 4 Additives, Fuel .
Automatic T ransaxle .............. 12,243,246,374 Adding Fluid ................... 375,376,398 Filter ............................... 3 7 6 Fluid and Filter Changes ................. 3 7 6 Fluid Level Check ................... 375,376 Interlock System .
Caps, Filler Fuel ............................... 3 0 9 Oil (Engine) .................. 347,348,349,356 Power Steering ........................ 2 5 9 Radiator (Coolant Pressur e) ............... 3 6 9 Car W ashes ............................ 3 7 8 Carbon Monoxide W arning .
Contract, Service ........................ 4 2 1 Coolant Pressur e Cap (Radiator Cap) .......... 3 6 9 Cooler , Beverage ........................ 1 4 0 Cooling System ......................... 3 6 7 Adding Coolant (Antifreeze) .............. 3 6 8 Coolant Capacity .
Door Locks, Automatic .................... 3 0 Door Opener , Garage ..................... 1 2 1 Driving On Slippery Surfaces ................... 2 5 5 Through Flowing, Rising, or Shallow Standing W ater ............... 2 5 6 DVD Player (V ideo Entertainment System™) .
Oil Selection ....................... 355,396 Oil Synthetic ......................... 3 5 7 Overheating .......................... 3 2 7 Starting ............................. 2 4 3 T emperature Gauge .................... 1 5 0 Engine Oil V iscosity .
Fluid Level Checks Automatic T ransaxle ................. 375,376 Brake ............................ 372,398 Cooling System ....................... 3 6 7 Engine Oil ........................... 3 5 4 Power Steering ..................... 259,398 Fluids .
Gauges Coolant T emperature ................... 1 5 0 Fuel ............................... 1 5 0 Odometer ........................... 1 5 4 T achometer .......................... 1 5 4 Gearshift .............................. 2 4 9 General Information .
Ignition Key Removal ..................... 1 2 Illuminated Entry ........................ 1 9 Immobilizer (Sentry Key) ................... 1 4 Infant Restraint ...................... 69,70,71 Information Center , V ehicle ................. 1 6 4 Inside Rearview Mirror .
Leaks, Fluid ............................ 8 4 Life of T ires ............................ 2 8 8 Light Bulbs .......................... 84,388 Lights .............................. 84,106 Airbag ........................ 62,67,82,151 Back-Up ...........
T i r e s ............................... 2 7 8 Locks Auto Unlock .......................... 3 1 Child Protection ........................ 3 2 Door ................................ 2 9 Power Door ........................... 3 0 Low T ire Pressur e System .
Odometer ............................. 1 5 4 T r i p ............................. 154,157 Oil Change Indicator ................ 156,166,400 Oil Change Indicator , Reset .............. 156,166 Oil, Engine ......................... 354,397 Capacity ...
Power Door Locks ........................... 3 0 Mirrors .............................. 9 0 Outlet (Auxiliary Electrical Outlet) .......... 1 3 0 Seats ................................ 9 9 Steering .......................... 258,259 Sunroof ..........
Replacement Bulbs ....................... 3 8 8 Replacement Keys ........................ 1 5 Replacement Parts ....................... 3 5 2 Replacement T ires ....................... 2 8 8 Reporting Safety Defects ................... 4 2 2 Resetting Oil Change Indicator .
Cleaning ............................ 1 0 4 Heated ............................. 1 0 1 Lumbar Support ....................... 9 6 Power ............................... 9 9 Rear Folding ....................... 103,104 Rear Folding (Sedan) .............
Steering Wheel Mounted Sound System Controls .............................. 2 2 2 Storage ............................ 134,388 Storage, V ehicle ......................... 2 3 5 Stuck, Freeing .......................... 3 3 9 Sun Roof .................
Radial .............................. 2 8 5 Replacement ......................... 2 8 8 Rotation ............................ 2 9 0 Safety ........................... 272,282 Sizes ............................... 2 7 4 Snow T ires ....................
T ransporting Pets ........................ 7 9 T read W ear Indicators .................... 2 8 7 T rip Odometer .......................... 1 5 4 T rip Odometer Reset Button ................ 1 5 7 T runk Release, Emergency ................ 37,38 T runk Release Remote Control .
Wheel and Wheel T rim .................... 3 7 9 Wheel and Wheel T rim Care ................ 3 7 9 W ind Buffeting ....................... 36,129 W indow Fogging ........................ 2 3 6 W indows .............................. 3 3 Power ........
Chrysler Group LL C 10D41-126-AC 3rd Edition Printed in U.S.A..
デバイスDodge 2010 Avengerの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Dodge 2010 Avengerをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはDodge 2010 Avengerの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Dodge 2010 Avengerの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Dodge 2010 Avengerで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Dodge 2010 Avengerを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はDodge 2010 Avengerの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Dodge 2010 Avengerに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちDodge 2010 Avengerデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
