Dolby LaboratoriesメーカーPlaza HD-T2の使用説明書/サービス説明書
ページ先へ移動 of 42
Us er Guide Freeview HD Receiver with Apps Plaza HD T2.
2 WEL COME Thanks for buying this Manhattan Plaza HD•T2 Freeview receiver, designed to provide you with the best in digital TV, radio and apps. Connect to a suitable HD-ready television using HDMI for breathtaking high definition digital pictures and digital sound.
3 CONTENT S In T he Box 5 Your receiver 6 Remote control 8 Pr epar a tion 10 The aerial 10 Connecting your receiver 10 Switching on 11 Tuning in 12 Ev eryday U se 14 Turning on the receiver 14 Changin.
4 1 CONTENT S Adv anced Use (con tinued) Time menu section 28 - Auto standby 28 - Sleep timer 28 - Auto turn on 28 - Auto turn off 28 System menu section 29 - Retune 29 - Manual scan 29 - Network con.
5 In T he Box In your Plaza HD•T2 Freeview receiver pack you should fi nd the following items: 1 def ghi jkl mno tuv pqrs wxyz abc def ghi jkl mno tuv pqrs wxyz abc def ghi jkl mno tuv pqrs wxyz ab.
6 YOUR RECEIVER Manhattan Plaza HD•T2 Front CHANNEL CHANGE UP/DOWN Change channels up and down STANDBY Switch the receiver on and off POWER INDICATOR LIGHT (red for standby, blue for on).
7 Manhattan Plaza HD•T2 Rear ANTENNA IN Input for connection to your aerial ETHERNET Network socket for connection to your router & the internet SCART Output for connection to a non-HD televisio.
8 REMOTE CONTROL Plaza HD•T2 def ghi jkl mno tuv pqrs wxyz abc def ghi jkl mno tuv pqrs wxyz abc def ghi jkl mno tuv pqrs wxyz abc def ghi jkl mno tuv pqrs wxyz abc 2nd Generation Remote Con trol Ma.
9 OK Selects the option in a menu. LIST Displays the channel list. GUIDE Displays the programme guide. BACK Exits a menu and returns to the main menu. EXIT Exits a menu and returns to normal TV viewing. Opens YouTube APPS Open Apps menu. V Turns the volume up.
10 Pr epar a tion This section explains how to set up your Plaza HD•T2 to receive Freeview channels. To receive Freeview, you must connect your Plaza HD•T2 receiver to an appropriate TV aerial that has been correctly installed. If your aerial is unable to provide adequate signal, it may need to be realigned.
11 Ensure your television is turned off and connect the HDMI cable supplied between the HDMI socket at the back of your Plaza HD•T2 receiver and an HDMI socket on your television. There may be more than one HDMI socket on your television. If you are not sure which to use, check the television’s manual.
12 Switch on the mains socket the Plaza HD•T2 is connected to. After a few seconds, the receiver’s first Freeview installation screen shown below will appear on the television screen: TUNING IN W.
13 Your Plaza HD•T2 receiver will scan for channels, displaying the total number of TV, radio and data channels found. When the scan is complete, press OK to proceed to the next step. To use the receiver’s parental guidance function, locked channels or restore to factory default, you need to create a PIN.
14 Ev eryday U se This section describes the day-to-day use of your Plaza HD•T2 receiver – how to select the channels that you want to watch, view the programme schedules, and control the basic features.
15 There are other ways to change channel: • Use the browsing bar at the bottom of the screen (see below) • Use the on-screen channel list (see page 17) • Use the programme guide (see page 18) CHANGING THE VOLUME You can increase or decrease the volume by using the V and V buttons on the remote control.
16 While the bar is displayed, press the button to see details of the next programme, and the button to go back again. To see what is on another channel, press the or buttons. To change to this channel, press OK while the bar is still displayed. To remove the bar from the screen at anytime, press EXIT .
17 USING THE CHANNEL LIST Display the on-screen channel list by pressing the LIST button on the remote control. This lists the channels on the left-hand side of the screen, in number order, and displays a preview window of the currently selected channel on the right-hand side of the screen.
18 USING THE PROGRAMME GUIDE The Plaza HD•T2 guide is used to display details of all programmes on in the week ahead and to open Apps such as BBC iPlayer or YouTube. Open the guide selection screen by pressing the GUIDE button on the remote control.
19 You look through the scheduled programmes using the and buttons to move through the channels and the and buttons to highlight programmes showing at different times. As you move the highlight bar through the schedule, the programme summary shown above the list changes to refl ect the programme highlighted.
20 INTERACTIVE TV SERVICES Several Freeview channels broadcast a range of digital text and interactive services, such as news, weather, games, sports information and video, alongside normal TV. If interactive services are available, they will be indicated by an on-screen prompt – usually a red button in the top right-hand corner of the screen.
21 USING THE FAVOURITES LISTS The favourites lists make it easier for you to choose the channel that you want to watch, by limiting the on-screen list to just a few channels, such as those of a particular type, or that one member of the family watches the most.
22 In the channel list, favourites lists can be selected in the same way as the Freeview TV, radio and data channel lists, by pressing the or buttons. Press OK to view a selected channel, to change the favourites lists it is assigned to, or PIN lock it by pressing the yellow button.
23 If you have set up your receiver for a 16:9 Widescreen TV, the options are: • Auto - the broadcaster chooses the best display format. • Widescreen - a 4:3 broadcast is stretched to fill the 16:9 screen. • Pillarbox – a 4:3 broadcast is shown unaltered with black bars on each side.
24 If you want to alter the channel list, first press the LIST button to display the channel list screen. To remove a channel, highlight it and press the red button to delete the channel. You need to confirm your choice to ensure you don’t delete a channel accidentally.
25 INFORMATION Press OK to show technical information about your receiver, including the Helpline phone number, signal strength and quality readings. PICTURE MENU SECTION Highlight the option you want to alter using the and buttons. When you have finished making the changes you want, leave the menu system by pressing BACK or EXIT .
26 SCREEN TYPE Press OK to show the screen type menu and use the and buttons to choose between 16:9 Widescreen and 4:3 Traditional. Press OK to confirm your choice.
27 SOUND MENU SECTION Highlight the option you want to alter using the and buttons. When you have fi nished making the changes you want, leave the menu system by pressing BACK or EXIT . AUDIO LANGUAGE The Freeview channels can broadcast in a number of languages.
28 SOUND MENU SECTION (continued) LIP-SYNC DELAY If you are using the S/PDIF output with a sound system and find the sound and picture falling out of sync, you can delay the sound output by a small amount to compensate.
29 AUTO TURN ON You can set the Plaza HD•T2 to switch on automatically at a particular time. Press OK to show the auto turn on menu and use the or buttons to set the timer to turn the receiver on once, every day, each week, on weekdays, weekends, or particular days of the week.
30 SYSTEM MENU SECTION (continued) Press OK to display the Manual Scan menu. Enter the UHF channel (21 - 68), frequency (474Mhz - 850Mhz) and bandwidth (7MHz or 8MHz) to be scanned. You can use the number buttons (0-9) to enter the channel and frequency, or use and to enter the channel, frequency and bandwidth.
31 SOFTWARE UPDATE VIA OAD Press OK to turn on or off the automatic software update. OAD SOFTWARE MANUAL SCAN Press OK to immediately search for new software to download. SOFTWARE UPDATE VIA USB Press OK to load new software for the receiver from a storage device connected to the USB socket on the back of the receiver.
32 AUTOMATIC (DHCP) Ensure the ETHERNET socket at the back of the Plaza HD•T2 is connected to your router or hub. See the Connecting your receiver section (page 10) for more information. You can check that the receiver has successfully connected to the Internet from the information menu.
33 MANUAL (STATIC) If your broadband modem/router is not compatible with DHCP (Dynamic Host Confi guration Protocol), or you wish to manually confi gure the Network Confi guration and IP address, press OK to select the Network Confi guration option.
34 A ppendix A – Saf et y POWER Your receiver requires a 100V to 240V AC ~ 50Hz mains supply and is fitted with a moulded plug. The mains plug is used as the disconnect device and shall remain readily operable. The USB port maximum load is 500mA under normal operation.
35 ELECTRICAL SAFETY Your receiver requires a 100V to 240V AC ~ 50/60Hz mains supply and is fitted with a moulded plug. If the plug breaks or becomes damaged do not use it. If you change the fuse in the plug ensure you refit the fuse cover. If the plug requires replacement please follow these instructions.
36 PROBLEM POSSIBLE CAUSE WHAT TO DO Power light off Power supply cable disconnected. Check the power supply cable. No set up screen Receiver not switched on. Check the mains power cable is plugged in and mains socket is turned on. Turn on receiver. HDMI/SCART cable disconnected.
37 PROBLEM POSSIBLE CAUSE WHAT TO DO No picture or sound HDMI/SCART cable disconnected. Check HDMI/SCART cable connections at receiver and television. Television not switched to HDMI/SCART input.
38 PROBLEM POSSIBLE CAUSE WHAT TO DO TV picture not HD Tuned to an SD channel. Tune to an HD channel. TV not capable of HD. Connect the receiver to an HD-Ready TV. TV connected by SCART. Connect the TV with the HDMI lead. No response with remote control Receiver in standby.
39 PROBLEM POSSIBLE CAUSE WHAT TO DO TV picture not HD Tuned to an SD channel. Tune to an HD channel. TV not capable of HD. Connect the receiver to an HD-Ready TV. TV connected by SCART. Connect the TV with the HDMI lead. No response with remote control Receiver in standby.
40 GUARANTEE The product is guaranteed for 12 months from the date of original purchase. If there’s any defect due to faulty materials or workmanship, please contact us and have your receipt of purchase available for reference.
41 What we do exclude: Except as set out in the preceding paragraph, we exclude all liability for any losses, whether in contract or tort, for any direct, indirect, incidental, special or consequentia.
v2 For assistance, please call the Manhattan helpline on 020 8450 0005 or visit our website at www.manhattan-tv.com v3.
デバイスDolby Laboratories Plaza HD-T2の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Dolby Laboratories Plaza HD-T2をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはDolby Laboratories Plaza HD-T2の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Dolby Laboratories Plaza HD-T2の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Dolby Laboratories Plaza HD-T2で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Dolby Laboratories Plaza HD-T2を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はDolby Laboratories Plaza HD-T2の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Dolby Laboratories Plaza HD-T2に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちDolby Laboratories Plaza HD-T2デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
