DraytekメーカーVigor2920nの使用説明書/サービス説明書
ページ先へ移動 of 370
1.
Vigor2920 Series User’s Guide ii Vigor2920 Series Dual-WAN Security Router User’s Guide Version: 2.5 Firmware Version: V3.6.0 (For future update, contact Dray Tek) Date: 24/08/2012.
Vigor2920 Series User’s Guide iii Copyright Information Copyright Declarations Copyright 2012 All rights reserved. This pub lication contains information that is protected by copyright.
Vigor2920 Series User’s Guide iv European Community Declarations Manufacturer: DrayTek Corp. Address: No. 26, Fu Shing Road, HuKou Town ship, HsinChu Industrial Park, Hsin-Chu, Taiwan 303 Product: Vigor2920 Ser ies Router DrayTek Corp.
Vigor2920 Series User’s Guide v T T a a b b l l e e o o f f C C o o n n t t e e n n t t s s Introduction ................................................................................................. 1 1.1 Web Conf iguration Bu ttons Explanation .
Vigor2920 Series User’s Guide vi 3.1 1 Request a CA Certif icate and Set as T rusted on Windows CA Server ............................... 84 3.12 Creating an Acc ount for My V igor ....................................................................
Vigor2920 Series User’s Guide vii 4.7.2 URL Content Filter Profile ............................................................................................. 19 6 4.7.3 Web Content Filter Pr ofile..................................................
Vigor2920 Series User’s Guide viii 4.15 System Ma intenance........................................................................................................ . 321 4.15.1 System Status ..........................................................
Vigor2920 Series User’s Guide 1 I I n n t t r r o o d d u u c c t t i i o o n n Vigor2920 series is a broadband router. It integrates IP layer QoS, NAT session/bandwidth management to help users control works well with large bandwidth.
Vigor2920 Series User’s Guide 2 1 1 . . 2 2 L L E E D D I I n n d d i i c c a a t t o o r r s s a a n n d d C C o o n n n n e e c c t t o o r r s s Before you use the Vigor router, please get acquainted with the LED indicators and connectors first. 1 1 .
Vigor2920 Series User’s Guide 3 Interface Description Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinkin g). Press the hole and keep for more than 5 seconds. When you see the ACT LED begins to blink rapid ly than usual, re lease the button.
Vigor2920 Series User’s Guide 4 1 1 . . 2 2 . . 2 2 F F o o r r V V i i g g o o r r 2 2 9 9 2 2 0 0 n n LED Status Explanation Blinking The router is powere d on and running norm ally. ACT (Activity) Off The router is powe red off. On USB device is connected and ready for use.
Vigor2920 Series User’s Guide 5 Interface Description Wireless LAN ON/OFF/WPS Press "Wireless LAN ON/OFF/WPS" butt on once to wait for client device making net work connecti on through WPS. Press "Wireless LAN ON/OFF/WPS" butt on twice to enable (WLAN LED on) or disable ( WLAN LED off) wireless conne ction.
Vigor2920 Series User’s Guide 6 1 1 . . 2 2 . . 3 3 F F o o r r V V i i g g o o r r 2 2 9 9 2 2 0 0 V V n n LED Status Explanation Blinking The router is powe red on and runnin g normally. ACT (Activity) Off The router is p owered off. On USB device is connected and ready for use.
Vigor2920 Series User’s Guide 7 Interface Description Wireless LAN ON/OFF/WPS Press "Wireless LAN ON/OFF/WPS" butt on once to wait for client device making net work connecti on through WPS. Press "Wireless LAN ON/OFF/WPS" butt on twice to enable (WLAN LED on) or disable ( WLAN LED off) wireless conne ction.
Vigor2920 Series User’s Guide 8 1 1 . . 3 3 H H a a r r d d w w a a r r e e I I n n s s t t a a l l l l a a t t i i o o n n Before starting to configure the router, you have to connect your devices correctly. 1. Connect the cable Modem/DSL Modem/Media Converter to any WAN port of router with Ethernet cable (RJ-45).
Vigor2920 Series User’s Guide 9 1 1 . . 4 4 P P r r i i n n t t e e r r I I n n s s t t a a l l l l a a t t i i o o n n You can install a printer onto the router for shar ing printing. All the PCs connected this router can print documents via the router.
Vigor2920 Series User’s Guide 10 4. Click Local printer attached to this computer and click Next. 5. In this dialog, choose Create a new port Type of port and use the drop down list to select Standard TCP/IP Port .
Vigor2920 Series User’s Guide 11 6. In the following dialog, type 192.168.1.1 (router’s LAN IP) in the field of Printer Name or IP Address and type IP_192.168.1.1 as the port name. Then, click Next . 7. Click Standard and choose Generic Network Card.
Vigor2920 Series User’s Guide 12 9. Now, your system will ask you to choose right na me of the printer that you installed onto the router. Such step can make correct driver loaded onto your PC.
Vigor2920 Series User’s Guide 13 The printer can be used for printing now. Most of the printers with different manufacturers are compatible with vigor router. Note 1: Some printers with the fax/scanning or other additional fun ctions are not supported.
Vigor2920 Series User’s Guide 14 This page is left blank..
Vigor2920 Series User’s Guide 15 C C o o n n f f i i g g u u r r i i n n g g B B a a s s i i c c S S e e t t t t i i n n g g s s For using the router properly, it is necessar y for you to change the password of web configuration for security and adjust primary basic settings.
Vigor2920 Series User’s Guide 16 2 2 . . 2 2 C C h h a a n n g g i i n n g g P P a a s s s s w w o o r r d d Please change the password for the or iginal security of the router. 1. Open a web browser on your PC and type http://192. 168.1.1. A pop-up window will open to ask for username and password.
Vigor2920 Series User’s Guide 17 5. Enter the login password on the field of Old Password . Type a new password in New Password and Confirm New Password fields. Then click OK to continue. 6. Now, the password has been changed. Next time, use the new password to access the Web Configurator for this router.
Vigor2920 Series User’s Guide 18 On the next page as shown below, please select the WAN interface that you use. If Ethernet interface is used, please choose WAN1/2 (based on the physical hardware connection); if 3G USB modem is used, please choose WAN3.
Vigor2920 Series User’s Guide 19 1. Choose WAN1/WAN2 as the WAN Interface and click the Next button. The following page will be open for you to specify Internet Access Type. 2. Click PPPoE as the Internet Access Type. Then click Next to open the following page.
Vigor2920 Series User’s Guide 20 Cancel Click it to give up the quick start wizard. 3. Please manually enter the Username/Password provided by your ISP. Click Next for viewing summary of such connection. 4. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear.
Vigor2920 Series User’s Guide 21 2 2 . . 3 3 . . 1 1 . . 2 2 P P P P T T P P / / L L 2 2 T T P P Click PPTP/L2TP as the protocol. Type in all the information that your ISP provides for this protocol. 1. Choose WAN1/WAN2 as the WAN Interface and click the Next button.
Vigor2920 Series User’s Guide 22 Available settings are explained as follows: Item Description User Name Assign a specific valid user name provided by the ISP. Password Assign a valid password provided by the ISP. Confirm Password Retype the password.
Vigor2920 Series User’s Guide 23 5. Now, you can enjoy surfing on the Internet. 2 2 . . 3 3 . . 1 1 . . 3 3 S S t t a a t t i i c c I I P P 1. Choose WAN1/WAN2 as the WAN Interface and click the Next button. The following page will be open for you to specify Internet Access Type.
Vigor2920 Series User’s Guide 24 Back Click it to return to previous setting page. Next Click it to get into the next setting page. Cancel Click it to give up the quick start wizard. 3. After finishing the settings in this page, click Next to see the following page.
Vigor2920 Series User’s Guide 25 2. Click DHCP as the Internet Access Type. Then click Next to continue. Available settings are explained as follows: Item Description Host Name Type the name of the host. MAC Some Cable service providers specify a specific MAC address for access authentication.
Vigor2920 Series User’s Guide 26 4. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system status of this protocol will be shown. 5. Now, you can enjoy surfing on the Internet. 2 2 . . 3 3 . . 2 2 F F o o r r W W A A N N 3 3 To use 3G USB modem for networ k connection, please choose WAN3.
Vigor2920 Series User’s Guide 27 2. Then, click Next to continue. 3. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system status of this protocol will be shown.
Vigor2920 Series User’s Guide 28 2. The screen of Service Activation Wizard will be shown as follows. Choose the one you need and click Next . In this case, we choose to activate free trial edition. Free trial edition : it offers a period of trial for you to get acquainted with WCF function.
Vigor2920 Series User’s Guide 29 4. Setting confirmation page will be displayed as follows, please click Next . 5. Wait for a moment till the following page appears. When such page appears, you can enable or disable these services for your necessity.
Vigor2920 Series User’s Guide 30 Later, if you need to extend the license valid time for the same service , you can also use the Service Activation Wizard again to reach your goal by clicking the radio button of Formal edition with license key and clicking Next.
Vigor2920 Series User’s Guide 31 2 2 . . 5 5 O O n n l l i i n n e e S S t t a a t t u u s s 2 2 . . 5 5 . . 1 1 P P h h y y s s i i c c a a l l C C o o n n n n e e c c t t i i o o n n Such page displays the physical connection status such as LAN connection status, WAN connection status, ADSL information, and so on.
Vigor2920 Series User’s Guide 32 Item Description LAN Status Primary DNS - Displays the IP address of the primary DNS. Secondary DNS - Displays the IP address of the secondary DNS. IP Address - Displays the IP address of the LAN interface. TX Packets - Displays the total transmitte d packets at the LAN interface.
Vigor2920 Series User’s Guide 33 Item Description interface. RX Bytes - Displays the total received octets at the LAN interface. WAN IPv6 Status Enable – No in red means such interface is available but not enabled. Yes in green means such interface is enabled.
Vigor2920 Series User’s Guide 34 2 2 . . 7 7 R R e e g g i i s s t t e e r r i i n n g g V V i i g g o o r r R R o o u u t t e e r r You have finished the configuration of Quick Start Wizard and you can surf the Internet at any time. Now it is the time to register your Vigor router to MyVigor website for getting more service.
Vigor2920 Series User’s Guide 35 4. The following page will be displayed after you logging in MyVigor. From this page, please click Add or Product Registration . Note: Below the field of Y our Device List, all the V igor routers that you have registered to MyV igor website will be displayed in sequence.
Vigor2920 Series User’s Guide 36 6. When the following page appears, your r outer inform ation has been added to the database. Click OK to leave this web page and return to My Information web page. 7. Take a look at the page of My Information, the new added Vigor r otuer is listed under Your Device List .
Vigor2920 Series User’s Guide 37 T T u u t t o o r r i i a a l l s s a a n n d d A A p p p p l l i i c c a a t t i i o o n n s s 3 3 . . 1 1 H H o o w w t t o o c c o o n n f f i i g g u u r r e e s.
Vigor2920 Series User’s Guide 38 Note: Only one WAN interface support IPv6 service at one time. In this example, WAN2 is chosen as the one supporting IPv6 service. 2. In the following figure, use the drop down list to choo se a proper connection type.
Vigor2920 Series User’s Guide 39 Click OK and open Online Status . If the connection is successful, you will get the IP address for IPv4 and IPv6 at the same time.
Vigor2920 Series User’s Guide 40 z TSPC – Tunnel application, both IPv6 hosts communicate through IPv4 n etwork Choose TSPC and type the information for TSPC service. Note: While using such mode, you have to ma ke sure the IPv4 network connection is normal.
Vigor2920 Series User’s Guide 41 z AICCU – Tunnel application Choose AICCU and type the information for AICCU of IPv6. Note: While using such mode, you have to ma ke sure the IPv4 network connection is normal. (In the following figure, the AICC U information is obtained from https://www.
Vigor2920 Series User’s Guide 42 z DHCPv6 Client Choose DHCPv6 Client. Click one of the identity associations and type the IAID number. Click OK and open Online Status .
Vigor2920 Series User’s Guide 43 z Static IPv6 Choose Static IPv6. Type IPv6 address, Prefix Length and Gateway Address. Click OK and open Online Status .
Vigor2920 Series User’s Guide 44 I I I I . . C C o o n n f f i i g g u u r r i i n n g g t t h h e e L L A A N N S S e e t t t t i i n n g g s s After finished the WAN settings for IPv6, pl ease configure the LAN settings to make the router’s client getting the IPv6 address.
Vigor2920 Series User’s Guide 45 I I I I I I . . C C o o n n f f i i r r m m i i n n g g I I P P v v 6 6 S S e e r r v v i i c c e e R R u u n n S S u u c c c c e e s s s s f f u u l l l l y y 1. Make sure you have get the correct IPv6 IP address. Get into MS-DOS interface and type the command of “ipconfig”.
Vigor2920 Series User’s Guide 46 3. Connect to the website for IPv6. Open a web browser and type an URL of IPv6, e.g., www.kame.net . If your computer accesses into th e website by using IPv6 address, you may see a turtle dancing on the screen. If not, only a steady turtle will be seen.
Vigor2920 Series User’s Guide 47 3 3 . . 2 2 H H o o w w t t o o S S e e n n d d o o u u t t S S M M S S v v i i a a V V i i g g o o r r R R o o u u t t e e r r Such vigor router supports the feature of SMS. 1. Go to Application >>Short Message Service to create a new SMS profile.
Vigor2920 Series User’s Guide 48 want to receive the SMS in the field of Destination Number ; type the total number of the messages that the router will send out in the field of Quota ; type the shortest time interval for the system to send SMS in the field of Sending Interval .
Vigor2920 Series User’s Guide 49 6. Configure the settings as the following figure. Choose one of the SMS profiles. In this example, the profile “For warning” is selected.
Vigor2920 Series User’s Guide 50 3 3 . . 3 3 H H o o w w c c a a n n I I g g e e t t t t h h e e f f i i l l e e s s f f r r o o m m U U S S B B s s t t o o r r a a g g e e d d e e v v i i c c e e c c o o n n n n e e c c t t i i n n g g t t o o V V i i g g o o r r r r o o u u t t e e r r ? ? 1.
Vigor2920 Series User’s Guide 51 3. Setup a user account for the FTP service by using USB Application >>USB User Management. Click Enable to enable FTP/Samba User account. Here we add a new account "user1" and assign authorities “Read”, “Write” and “List” to it.
Vigor2920 Series User’s Guide 52 6. When the following screen appears, it means the FTP service is running properly. 7. Return to USB Application >> USB Disk Status . The information for FTP server will be shown as below. Now, users in LAN of Vigor2920 can access into the USB storage device by typing ftp://192.
Vigor2920 Series User’s Guide 53 3 3 . . 4 4 H H o o w w t t o o c c o o n n f f i i g g u u r r e e M M u u l l t t i i - - S S u u b b n n e e t t f f o o r r V V i i g g o o r r R R o o u u t t e e r r There are two types of VLAN. One is P ort B ased VLAN; the other is Tag Based VLAN.
Vigor2920 Series User’s Guide 54 5. In the page of LAN >> General Setup , check the Status box of LAN2 and LAN3 and enable the function of DHCP. After finishing the above configuration, the equipm ent connecting to Vigor2920 LAN Port can get the corresponding IP address of the network segment.
Vigor2920 Series User’s Guide 55 6. To make any two of VLAN groups linked with each other, just check the boxes of the ones in the field of Inter-LAN Routing in the page of LAN >> General Setup . Refer to the following figure. LAN2 and LAN3 are linked.
Vigor2920 Series User’s Guide 56 I I I I . . T T a a g g B B a a s s e e d d V V L L A A N N By identifying the tagged message, Vigor2920 can divide the LAN Port into several VLAN groups. Such LAN port with tagged informati on will accept the packets only with VLAN ID number.
Vigor2920 Series User’s Guide 57 5. To activate the function of VLAN Tag for VLAN3 setting, check the box of Enable and type the value (10) for VID setting. Then check P4 and set LAN4 as the Subnet . 6. In the page of LAN >> General Setup , check the Status box of LAN2, LAN3 and LAN4 and enable the function of DHCP.
Vigor2920 Series User’s Guide 58 C C o o n n f f i i g g u u r r a a t t i i o o n n f f o o r r V V i i g g o o r r S S w w i i t t c c h h 2 2 2 2 4 4 0 0 : : 1. Open Vlan>>Tag-based Group . 2. Add four VID groups. In this case, we can e xplanation it with Port 15, 16, 17, 18 and Trunk Port 23.
Vigor2920 Series User’s Guide 59 4. After finishing the above configuration, the equipment connecting to VigorSwitch Port 15 , 16, 17 and 18 can get the corresponding IP address(es) of the network segment. The equipment connecting to VigorSwitch Port 15 can get the IP address of 192.
Vigor2920 Series User’s Guide 60 3 3 . . 5 5 H H o o w w t t o o C C u u s s t t o o m m i i z z e e Y Y o o u u r r L L o o g g i i n n P P a a g g e e Login page can be customized to fit the request of the administrator. 1. Open User Management>>General Setup .
Vigor2920 Series User’s Guide 61 4. Open System Maintenance>>Login Customization . Check the box to enable this function. Type a brief description (e.g., Just for Carrie ) in the field of Login De scription which will be shown on the heading of the login dialog.
Vigor2920 Series User’s Guide 62 3 3 . . 6 6 H H o o w w t t o o u u s s e e S S m m a a r r t t M M o o n n i i t t o o r r w w i i t t h h V V i i g g o o r r 2 2 9 9 2 2 0 0 s s e e r r i i e e s.
Vigor2920 Series User’s Guide 63 3 3 . . 7 7 C C r r e e a a t t e e a a L L A A N N - - t t o o - - L L A A N N C C o o n n n n e e c c t t i i o o n n B B e e t t w w e e e e n n R R e e m m o o t.
Vigor2920 Series User’s Guide 64 3. Go to LAN-to-LAN . Click on one index number to edit a profile. 4. Set Common Settings as shown below. You should enable both of VPN connections because any one of the parties may start the VPN connection.
Vigor2920 Series User’s Guide 65 5. Set Dial-Out Settings as shown below to dial to connect to Router B aggressively with the selected Dial-Out method. If an IPSec-based service is selected, y ou should further specify the remote peer IP Address, IKE Authentication Method and IPSec Security Method for this Dial-Out connection.
Vigor2920 Series User’s Guide 66 6. Set Dial-In settings to as shown below to allow Router B dial-in to build VPN connection. If an IPSec-based service i s selected, you may further specify the remote peer IP Address, IKE Authentication Method and I PSec Security Method for this Dial-In connection.
Vigor2920 Series User’s Guide 67 7. At last, set the remote network IP/subnet in TCP/IP Network Settings so that Router A can direct the packets destined to the remote network to Router B via the VPN connection. Settings in Router B in the remote office: 1.
Vigor2920 Series User’s Guide 68 3. Go to LAN-to-LAN . Click on one index number to edit a profile. 4. Set Common Settings as shown below. You should enable both of VPN connections because any one of the parties may start the VPN connection.
Vigor2920 Series User’s Guide 69 If a PPP-based service is selected, you should further specify the remote peer IP Address, Username, Password, PPP Authen tication and VJ Compression for this Dial-Out connection. 6. Set Dial-In settings to as shown below to allow Router A dial-in to build VPN connection.
Vigor2920 Series User’s Guide 70 If a PPP-based service is selected, y ou should further specify the remote peer IP Address, Username, Password, and VJ Compression for this Dial-In connection.
Vigor2920 Series User’s Guide 71 3 3 . . 8 8 C C r r e e a a t t e e a a R R e e m m o o t t e e D D i i a a l l - - i i n n U U s s e e r r C C o o n n n n e e c c t t i i o o n n B B e e t t w w e.
Vigor2920 Series User’s Guide 72 3. Go to Remote Dial-In User . Click on one index number to edit a profile. 4. Set Dial-In settings to as shown below to allow the remote user dial-in to build VPN connection.
Vigor2920 Series User’s Guide 73 If a PPP-based service is selected, you should further specify the remote peer IP Address, Username, Password, and VJ Com p ression for this Dial-In connection. Settings in the remote host: 1. For Win98/ME, you may use "Dial-up Networking" to create the PPTP tunnel to Vigor router.
Vigor2920 Series User’s Guide 74 You may further specify the method you use to get IP, the security method, and authentication method. If the Pre-Shared Key is selected, it should be consistent with the one set in VPN router.
Vigor2920 Series User’s Guide 75 4. Click Connect button to build connection. When the connection is successful, you will find a green light on the right down corner. 3 3 . . 9 9 Q Q o o S S S S e e t t t t i i n n g g E E x x a a m m p p l l e e Assume a teleworker someti mes works at hom e and takes care of children.
Vigor2920 Series User’s Guide 76 2. Click Setup link of W AN. Make sure the QoS Control on the left corner is checked. And select BOTH in Dir ection . 3. Set Inbound/Outbound ba ndwidth. Note: The rate of outbound/inbound m ust be smaller than the real bandwidth to ensure correct calculation of QoS.
Vigor2920 Series User’s Guide 77 5. For this index, the user will set reserved bandwidth (e.g., 25%) for E-mail using protocol POP3 and SMTP . 6. Return to previous page. Enter th e Name of Index Class 2 by clicking Edit link. In this index, the user will set reserved bandwidth for HTTPS .
Vigor2920 Series User’s Guide 78 8. Check Enable UDP Bandwidth Contr ol on the bottom to prevent enorm ous UDP traffic of influent other application. Click OK . 9. If the worker has connected to the headquart er using host to host VPN tunnel. (Please refer to Chapter 3 VPN for detail instruction), he m ay set up an index for it.
Vigor2920 Series User’s Guide 79 12. Then click Edit of Local Address to set a worker ’ s subnet address. Click Edit of Remote Address to set headquarter ’ s IP address.
Vigor2920 Series User’s Guide 80 3 3 . . 1 1 0 0 R R e e q q u u e e s s t t a a c c e e r r t t i i f f i i c c a a t t e e f f r r o o m m a a C C A A s s e e r r v v e e r r o o n n W W i i n n d d o o w w s s C C A A S S e e r r v v e e r r 1. Go to Certificate Management and choose Local Certificate .
Vigor2920 Series User’s Guide 81 2. You can click GENERATE button to start to edit a certificate request. Enter the information in the certificate request. 3. Copy and save the X509 Local Certificate Requet as a text file and save it for later use. 4.
Vigor2920 Series User’s Guide 82 Select Advanced request . Select Submit a certificate request a base64 encoded PKCS #10 file or a renewal request using a base64 encoded PKCS #7 file Import the X509 Local Certificate Requet text file. Select Router (Offline request) or IPSec (Offline request) below.
Vigor2920 Series User’s Guide 83 5. Back to Vigor router, go to Local Certificate . Click IMPORT button and browse the file to import the certificate (.cer file) into Vigor router. When finished, click refresh and you will find the below window showin g “------BEGINE CERTIFICATE------.
Vigor2920 Series User’s Guide 84 3 3 . . 1 1 1 1 R R e e q q u u e e s s t t a a C C A A C C e e r r t t i i f f i i c c a a t t e e a a n n d d S S e e t t a a s s T T r r u u s s t t e e d d o o n n W W i i n n d d o o w w s s C C A A S S e e r r v v e e r r 1.
Vigor2920 Series User’s Guide 85 2. In Choose file to download , click CA Certificate Current and Base 64 encoded, and Download CA certificate to save the .cer. file. 3. Back to Vigor router, go to Trusted CA Certificate . Click IMPORT button and browse the file to import the certificate (.
Vigor2920 Series User’s Guide 86 3 3 . . 1 1 2 2 C C r r e e a a t t i i n n g g a a n n A A c c c c o o u u n n t t f f o o r r M M y y V V i i g g o o r r The website of MyVigor (a server located on http://myvigor.
Vigor2920 Series User’s Guide 87 2. Click the Activate link. A login page for MyVigor web site will pop up autom atically. 3. Click the link of Create an account now .
Vigor2920 Series User’s Guide 88 5. Type your personal information in this page and then click Continue . 6. Choose proper selection for your computer and click Continue .
Vigor2920 Series User’s Guide 89 7. Now you have created an account successfully. Click START. 8. Check to see the confirmation email with the title of New Account Confirmation Letter from myvigor.draytek.com . 9. Click the Activate my Account link to enable the account that you created.
Vigor2920 Series User’s Guide 90 10. When you see the following page, please type in the account and password (that y ou just created) in the fields of UserName and Password . 11. Now, click Login . Your account has been activated. You can access into MyVigor server to activate the service (e.
Vigor2920 Series User’s Guide 91 2. Check to confirm that you accept the Agreement and click Accept . 3. Type your personal information in this page and then click Continue .
Vigor2920 Series User’s Guide 92 5. Now you have created an account successfully. Click START. 6. Check to see the confirmation email with the title of New Account Confirmation Letter from myvigor.draytek.com . 7. Click the Activate my Account link to enable the account that you created.
Vigor2920 Series User’s Guide 93 8. When you see the following page, please type in the account and password (that you just created) in the fields of UserName and Password . Then type the code in the box of Auth Code according to the value displayed on the right side of it.
Vigor2920 Series User’s Guide 94 This page is left blank..
Vigor2920 Series User’s Guide 95 A A d d v v a a n n c c e e d d W W e e b b C C o o n n f f i i g g u u r r a a t t i i o o n n This chapter will guide users to execute adva nced (full) configuration thr ough admin mode operation. 1. Open a web browser on your PC and type http://192.
Vigor2920 Series User’s Guide 96 From 10.0.0.0 to 10.255.255.255 From 172.16.0.0 to 172.31.255.255 From 192.168.0.0 to 192.168.255.255 W W h h a a t t a a r r e e P P u u b b l l i i c c I I P P A A.
Vigor2920 Series User’s Guide 97 Therefore, when WAN1/WAN2 is not availabl e, the router will use 3.5G for supporting automatically. The supported 3G USB Modem w ill be listed on Draytek web site. Please visit www.draytek.com for more detailed information.
Vigor2920 Series User’s Guide 98 Each item is explained as follows: Item Description Load Balance Mode This option is available for multiple-WAN for getting enough bandwidth for each WAN port. If you know the practical bandwidth for your WAN interface, please choose the setting of According to Line Speed .
Vigor2920 Series User’s Guide 99 D D e e t t a a i i l l e e d d S S e e t t t t i i n n g g s s f f o o r r W W A A N N 1 1 / / W W A A N N 2 2 I I n n t t e e r r f f a a c c e e ( ( v v i i a a E E t t h h e e r r n n e e t t ) ) Be aware that WAN2 is fixed with physical mode of Giga Ethernet.
Vigor2920 Series User’s Guide 100 sending by WAN1. Disable – Disable the function of VLAN with tag. Tag value – Type the value as the VLAN ID number. The range is form 0 to 4095. Priority – Type the packet priority number for such VLAN. The range is from 0 to 7.
Vigor2920 Series User’s Guide 101 Available settings are explained as follows: Item Description Enable Choose Yes to invoke the settings for this WAN interface. Choose No to disable the settings for this WAN interface. Display Name Type the description for such WAN interface.
Vigor2920 Series User’s Guide 102 which WAN interface will be selected to backup multiple WANs. However, ignore this se tting if you want to backup a single WAN. When any WAN disconnect – Such backup WAN will be activated when any master WAN interfa ce disconnects.
Vigor2920 Series User’s Guide 103 Each item is explained as follows: Item Description Index Display the WAN interface. Display Name It shows the name of the WAN1/WAN2/WAN3 that entered in general setup. Physical Mode It shows the physical connection for WAN1(Ethernet)/WAN2 (Ethernet) /WAN3 (3G USB Modem) according to the real network connection.
Vigor2920 Series User’s Guide 104 Item Description this function will be closed and all the settings that you adjusted in this page will be invalid. ISP Access Setup Enter your allocated username , password and authentication parameters according to the info rmation provided by your ISP.
Vigor2920 Series User’s Guide 105 Item Description WAN IP Alias. You can set up to 8 public IP addresses other than the current one you are using. Fixed IP – Click Yes to use this function and type in a fixed IP address in the box of Fixed IP Address .
Vigor2920 Series User’s Guide 106 Available settings are explained as follows: Item Description Static or Dynamic IP Click Enable for activating this function. If you click Disable , this function will be closed and all the settings that you adjusted in this page will be invalid.
Vigor2920 Series User’s Guide 107 Item Description RIP Protocol Routing Information Protoc ol is abbreviated as RIP(RFC1058) specifying how routers exchange routing tables information. Click Enable RIP for activating this function. Bridge Mode If you check this box to invoke the function, the router will work as a bridge.
Vigor2920 Series User’s Guide 108 Item Description such cases you need to click the Specify a MAC Address and enter the MAC address in the MAC Address field. DNS Server IP Address - Type in the pri mary IP address for the router if you want to use Static IP mode.
Vigor2920 Series User’s Guide 109 Item Description time schedule for your request. All the schedules can be set previously in Application – Schedule web page and you can use the number that you have set in that web page. MTU It means Max Transmit Unit for packet.
Vigor2920 Series User’s Guide 110 Item Description Fixed IP Address - Type a fixed IP address. WAN IP Network Settings Obtain an IP address automatically – Click this button to obtain the IP address automatically. Specify an IP address – Click this radio button to specify some data.
Vigor2920 Series User’s Guide 111 Item Description Modem Initial String Such value is used to initia lize USB modem. Please use the default value. If you have any question, please contact to your ISP. APN Name APN means Access Point Name which is provided and required by some ISPs.
Vigor2920 Series User’s Guide 112 D D e e t t a a i i l l s s P P a a g g e e f f o o r r D D y y n n a a m m i i c c I I P P ( ( D D H H C C P P C C l l i i e e n n t t ) ) i i n n W W A A N N 3 3 To use 4G Wimax /LTE for accessing the internet, please choose Internet Access from WAN menu.
Vigor2920 Series User’s Guide 113 D D e e t t a a i i l l s s P P a a g g e e f f o o r r I I P P v v 6 6 – – O O f f f f l l i i n n e e i i n n W W A A N N 1 1 / / W W A A N N 2 2 / / W W A A N N 3 3 When Offline is selected, the IPv6 connection will be disabled.
Vigor2920 Series User’s Guide 114 Note : At present, the IPv6 prefix can be acquired via the PPPo E mode connection which is available for the areas such as Taiwan (h inet), the Netherlands, Australia and UK.
Vigor2920 Series User’s Guide 115 Item Description Username Type the name obtained from the broker. Password Type the password assigned with the user name. Confirm Password Type the password again to make the confirmation. Tunnel Broker Type the address for the tunnel broker IP, FQDN or an optional port number.
Vigor2920 Series User’s Guide 116 D D e e t t a a i i l l s s P P a a g g e e f f o o r r I I P P v v 6 6 – – D D H H C C P P v v 6 6 C C l l i i e e n n t t i i n n W W A A N N 1 1 / / W W A A N N 2 2 DHCPv6 client mode would use DHCPv6 protocol to obtain IPv6 address from server.
Vigor2920 Series User’s Guide 117 Available settings are explained as follows: Item Description Static IPv6 Address configuration IPv6 Address – Type the IPv6 Static IP Address. Prefix Length – Type the fixed value for prefix length. Add – Click it to add a new entry.
Vigor2920 Series User’s Guide 118 Protocol Use the drop-down menu to change the protocol for t he WAN interface. WAN Use the drop-down menu to change the WAN interface. Src IP Start Displays the IP address for the start of the source IP Src IP End Displays the IP address for the end of the source IP.
Vigor2920 Series User’s Guide 119 Item Description Src IP Start Type the source IP start for the specified WAN interface. Src IP End Type the source IP end for the specified WAN interface. If this field is blank, it means that all the source IPs inside the LAN will be passed through the WAN interface.
Vigor2920 Series User’s Guide 120 Item Description down list on the web page of Internet Access . Though you can enable eight channels in this pa ge, yet only one channel can be chosen on the web page of Internet Access . Add Tag To identify the usage of VLAN, check this box to invoke this setting.
Vigor2920 Series User’s Guide 121 Item Description configured with PVC in the page of Application>>IGMP . For other settings, refer to Details Page for PPPoE in WAN1. B B r r i i d d g g e e General page lets you set the first channel. As to set the third channel, please click the Bridge tab to open Bridge configuration page.
Vigor2920 Series User’s Guide 122 4 4 . . 2 2 L L A A N N Local Area Network (LAN) is a group of subnets regulated and ruled by router . The design of network structure is related to what type of public IP addresses coming from your ISP . 4 4 . . 2 2 .
Vigor2920 Series User’s Guide 123 W W h h a a t t i i s s R R o o u u t t i i n n g g I I n n f f o o r r m m a a t t i i o o n n P P r r o o t t o o c c o o l l ( ( R R I I P P ) ) V igor router will exchange routing informati on with neighboring routers using the RIP to accomplish IP routing.
Vigor2920 Series User’s Guide 124 4 4 . . 2 2 . . 2 2 G G e e n n e e r r a a l l S S e e t t u u p p This page provides you the general settings for LAN. Click LAN to open the LAN settings page and choose General Setup . There are four subnets provided by the router wh ich allow users to divide groups into d ifferent subnets (LAN1 – LAN4).
Vigor2920 Series User’s Guide 125 Force router to use “DNS server IP address” settings as specified in … Force Vigor router to use DNS servers configured in LAN1/LAN2/LAN3/LAN4 instead of DNS servers given by the Internet Access serv er (PPPoE, PPTP, L2TP or DHCP server).
Vigor2920 Series User’s Guide 126 Item Description Enable Relay Agent – Specify which subnet that DHCP server is located the relay agent should redirect the DHCP request to. S tart IP Address - Enter a value of the IP address pool for the DHCP s erver to start with when issuing IP addresse s.
Vigor2920 Series User’s Guide 127 D D e e t t a a i i l l s s P P a a g g e e f f o o r r L L A A N N 1 1 – – I I P P v v 6 6 S S e e t t u u p p There are two configuration pages for LAN1 , Ethernet TCP/IP and DHCP Setup (based on IPv4) and IPv6 Setup.
Vigor2920 Series User’s Guide 128 list. DHCPv6 Server Configuration Enable Server –Click it to enable DHCPv6 server. DHCPv6 Server could assign IPv6 address to PC according to the Start/End IPv6 address configuration. Disable Server –Click it to disable DHCPv6 server.
Vigor2920 Series User’s Guide 129 Item Description configured as a DHCP client. It is highly recommended that you leave the router enabled as a DHCP server if y ou do not have a DHCP server for your network.
Vigor2920 Series User’s Guide 130 Available settings are explained as follows: Item Description Network Configuration Enable/Disable - Click Enable to enable such configuration; click Disable to disable such configuration. IP Address - T ype in IP address for connecting to a local private network (Default: 192.
Vigor2920 Series User’s Guide 131 Cancel – Click it to cancel the job of adding, deleting and editing. After finishing all the settings here, please click OK to save the configuration. 4 4 . . 2 2 . . 3 3 S S t t a a t t i i c c R R o o u u t t e e Go to LAN to open setting page and choose Static Route .
Vigor2920 Series User’s Guide 132 1. Go to LAN page and click General Setup , select 1st Subnet as the RIP Protocol Control. Then click the OK button.
Vigor2920 Series User’s Guide 133 4. Go to Diagnostics and choose Routing T able to verify current routing table. S S t t a a t t i i c c R R o o u u t t e e f f o o r r I I P P v v 6 6 You can set up to 40 profiles for IPv6 static route.
Vigor2920 Series User’s Guide 134 Destination Address Displays the destination address of the static route. Status Displays the status of the static route. Set to Factory Default Clear all of the settings and return to factory default settings. Viewing IPv6 Routing Table Displays the routing table for your reference.
Vigor2920 Series User’s Guide 135 4 4 . . 2 2 . . 4 4 V V L L A A N N Virtual LAN function provides you a very convenient way to manage hosts by g rouping them based on the physical port. You can also mana ge the in/out rate of each port. Go to LAN page and select VLAN .
Vigor2920 Series User’s Guide 136 After finishing all the settings here, please click OK to save the configuration. Note: Settings in this page only applied to LAN port but not W AN port.
Vigor2920 Series User’s Guide 137 ARP Table This table is the LAN ARP table of this router. The information for IP and MAC will be displayed in this field. Each pair of IP and MAC address listed in ARP table can be selected and added to IP Bind List by clicking Add below .
Vigor2920 Series User’s Guide 138 Available settings are explained as follows: Item Description Port Mirror Check Enable to activate this function. Or, check Disable to close this function. Mirror Port Select a port to view traffic sent from mirrored ports.
Vigor2920 Series User’s Guide 139 802.1x ports After enabling the function, simply specify the LAN port(s) to apply such function. After finishing all the settings here, please click OK to save the configuration. 4 4 . . 3 3 N N A A T T Usually, the router serves as an NAT (Network Address Translation) router.
Vigor2920 Series User’s Guide 140 The port redirection can only apply to incoming traffic. To use this function, please go to NAT page and choose Port Redirection web page. The Port Redirection Table provides 20 port-m apping entries for the internal hosts.
Vigor2920 Series User’s Guide 141 service. Status Display if the profile is enabled (v) or not (x). Press any number under Index to access into next page for configuring port redirection. Available settings are explained as follows: Item Description Enable Check this box to enable such port redirection setting.
Vigor2920 Series User’s Guide 142 Private Port Specify the private port number of the service offered by the internal host. After finishing all the settings here, please click OK to save the configuration. Note that the router has its own built-in servi ces (servers) such as T elnet, HTTP and FTP etc.
Vigor2920 Series User’s Guide 143 The security properties of NA T are somewhat bypassed if you set up DMZ host. W e suggest you to add additional filter rules or a secondary firewall. Click DMZ Host to open the following page: Available settings are explained as follows: Item Description Choose Private IP or Active True IP first.
Vigor2920 Series User’s Guide 144 When you have selected one private IP from the above dialog, the IP address will be shown on the screen. Click OK to save the setting. DMZ Host for WAN2 and WAN3 is slightly different with WAN1. See the following figure.
Vigor2920 Series User’s Guide 145 Choose PC Click this button and then a wi ndow will autom atically pop up, as depicted below. The window consists of a list of private IP addresses of all hosts in your LAN network. Select one private IP address in the list to be the DMZ host.
Vigor2920 Series User’s Guide 146 4 4 . . 3 3 . . 3 3 O O p p e e n n P P o o r r t t s s Open Ports allows you to open a range of ports for the traffic of special applications. Common application of Open Ports includes P2 P application (e.g., BT, KaZaA, Gnutella, WinMX, eMule and others), Internet Camera etc.
Vigor2920 Series User’s Guide 147 Available settings are explained as follows: Item Description Enable Open Ports Check to enable this entry. Comment Make a name for the defined network application/service. WAN Interface Specify the WAN interface that w ill be used for this entry.
Vigor2920 Series User’s Guide 148 Internet. You can use address mapping functi on to achieve this demand. Sim ply type 192.168.1.10 as the Private IP; and t ype 86.
Vigor2920 Series User’s Guide 149 Item Description Enable Check to enable this entry. Protocol Specify the transport layer protocol. It could be TCP , UDP , or ALL for selection. WAN Interface Choose the WAN interface for such address mapping profile.
Vigor2920 Series User’s Guide 150 Available settings are explained as follows: Item Description Comment Display the text which memorizes the application of this rule. Triggering Protocol Display the protocol of the triggering packets. Triggering Port Display the port of the triggering packets.
Vigor2920 Series User’s Guide 151 Service Choose the predefined service to apply for such trigger profile. Comment Type the text to memorize the application of this rule. Triggering Protocol Select the protocol (TCP, UDP or TCP/UDP) for such triggering profile.
Vigor2920 Series User’s Guide 152 4 4 . . 4 4 F F i i r r e e w w a a l l l l 4 4 . . 4 4 . . 1 1 B B a a s s i i c c s s f f o o r r F F i i r r e e w w a a l l l l While the broadband users demand more bandwidth f or multimedia, interactive applications, or distance learning, security has been always the most concerned.
Vigor2920 Series User’s Guide 153 S S t t a a t t e e f f u u l l P P a a c c k k e e t t I I n n s s p p e e c c t t i i o o n n ( ( S S P P I I ) ) Stateful inspection is a firewall architecture that works at the network layer.
Vigor2920 Series User’s Guide 154 4 4 . . 4 4 . . 2 2 G G e e n n e e r r a a l l S S e e t t u u p p General Setup allows you to adjust setti ngs of IP Filter and common options. Here you can enable or disable the Call Filter or Data Filter . Under some circumstance, your filter set can be linked to work in a serial manner.
Vigor2920 Series User’s Guide 155 After finishing all the settings here, please click OK to save the configuration. D D e e f f a a u u l l t t R R u u l l e e P P a a g g e e Such page allows you to choose filtering prof iles including QoS, Load-Balance policy, WCF, APP Enforcement, URL Content Filter for data transmission via Vigor router.
Vigor2920 Series User’s Guide 156 Item Description Load-Balance Policy Choose the W AN interface for applying Load-Balance Policy . User Management Such item is available only when Rule-Based is selected in User Management>>General Setup . The general firewall rule will be applied to the user/user group/all users specified here.
Vigor2920 Series User’s Guide 157 Item Description the drop down list in this page to create a new profile. For troubleshooting needs, you can specify to record inform ation for W eb Content Filter by checking the Log box. It will be sent to Syslog server .
Vigor2920 Series User’s Guide 158 4 4 . . 4 4 . . 3 3 F F i i l l t t e e r r S S e e t t u u p p Click Firewall and click Filter Setup to open the setup page. To edit or add a filter, click on the set numbe r to edit the individual set. The following page will be shown.
Vigor2920 Series User’s Guide 159 Available settings are explained as follows: Item Description Check to enable the Filter Rule Check this box to enable the filter rule. Comments Enter filter set comments/description. Maximum length is 14- character long.
Vigor2920 Series User’s Guide 160 Item Description Note: RT means routing domain for 2nd subnet. Source/Destination IP Click Edit to access into the follo wing dialog to choose the source/destination IP or IP ranges.
Vigor2920 Series User’s Guide 161 Item Description To set the service type manually, please choose User defined as the Service Type and type them in this dialog. In addition, if you want to use the service type from defined groups or objects, please choose Group and Objects as the Service Type.
Vigor2920 Series User’s Guide 162 Item Description Pass Immediately - Packets matching the rule will be passed immediately. Block If No Further Match - A packet matching the rule, and that does not match further rules, will be dropped.
Vigor2920 Series User’s Guide 163 Item Description APP Enforcement profile setup. For troubleshooti ng needs, you can specify to record information for IM/P2P by checking the Log box. It will be sent to Syslog server . Please refer to section Syslog/Mail Alert for more detailed information.
Vigor2920 Series User’s Guide 164 Item Description Window size – It determines the size of TCP protocol (0~65535). T he more the value is, the better the performance will be. However , if the network is not stable, small value will be proper . Session timeout –Setting timeout for sessions can make the best utilization of network resources.
Vigor2920 Series User’s Guide 165 E E x x a a m m p p l l e e As stated before, all the traffic will be separate d and arbitrated using on of two IP filters: call filter or data filter. You may preset 12 call filters and data filters in Filter Setup and even link them in a serial manner.
Vigor2920 Series User’s Guide 166 4 4 . . 4 4 . . 4 4 D D o o S S D D e e f f e e n n s s e e As a sub-functionality of IP Filter/Firewall, th ere are 15 types of detect/ defense function in the DoS Defense setup. The DoS Defense functionality is disabled for default.
Vigor2920 Series User’s Guide 167 Item Description defense Similar to the UDP flood defense function, once if the Threshold of ICMP packets fro m Internet has exceeded the defined value, the router will discard the ICMP echo requests coming from the Internet.
Vigor2920 Series User’s Guide 168 Item Description fragmented ICMP packets with a length greater than 1024 octets. Block Ping of Death Check the box to activate the Block Ping of Death function.
Vigor2920 Series User’s Guide 169 4 4 . . 5 5 U U s s e e r r M M a a n n a a g g e e m m e e n n t t User Management is a security feature which disallows any IP traffic (except DHCP-related packets) from a particular host until that host has correctly supplied a valid username and password.
Vigor2920 Series User’s Guide 170 4 4 . . 5 5 . . 1 1 G G e e n n e e r r a a l l S S e e t t u u p p General Setup can determine the standard (rule -based or user-based) for the users controlled by User Management. The mode (standard) select ed here will influence the contents of the filter rule(s) applied to every user.
Vigor2920 Series User’s Guide 171 4 4 . . 5 5 . . 2 2 U U s s e e r r P P r r o o f f i i l l e e This page allows you to set customized profiles (up to 200) which will be applied for users controlled under User Management . Simply open User Management>>User Profile .
Vigor2920 Series User’s Guide 172 Available settings are explained as follows: Item Description Enable this account Check this box to enable such user profile. User Name Type a name for such user profile (e.g., LAN_User_Group_1, WLAN_User_Group_A, WLAN_User_Group_B, etc).
Vigor2920 Series User’s Guide 173 Item Description For the detailed configuration, simply refer to Firewall>>Filter Rule . The firewall filter rules that are not selected in Firewall>>General>>Defa ult rule can be available for use in User Management>>User Profile .
Vigor2920 Series User’s Guide 174 Item Description type the user name and password for authentication. A window with remaining time of connection for such user will be displayed. Next, the user can access Internet through any browser on Windows. Note that Alert Tool can be downloaded from DrayTek web site.
Vigor2920 Series User’s Guide 175 Available settings are explained as follows: Item Description Name Type a name for this user group. Available User Objects You can gather user profiles (objects) from User Profile page within one user group. All the available user objects that you have created will be shown in th is box.
Vigor2920 Series User’s Guide 176 Item Description Refresh Seconds Use the drop down list to choose the time interval of refreshing data flow that will be done by the system automatically. Refresh Click this link to refr esh this page manually. Index Display the number of the data flow.
Vigor2920 Series User’s Guide 177 4 4 . . 6 6 O O b b j j e e c c t t s s S S e e t t t t i i n n g g s s For IPs in a range and service ports in a limited range usually will be applied in configuri ng router’s settings, therefore we can define them with objects and bind them with groups for using conveniently.
Vigor2920 Series User’s Guide 178 Available settings are explained as follows: Item Description Name Type a name for this profile. Maximum 15 characters are allowed. Interface Choose a proper interface. For example, the Direction setting in Edit Filter Rule will ask you specify IP or IP range for WAN or LAN or any IP address.
Vigor2920 Series User’s Guide 179 Item Description Start IP Address Type the start IP address for Single Address type. End IP Address Type the end IP address if the Range Address type is selected. Subnet Mask Type the subnet mask if the Subnet Address type is selected.
Vigor2920 Series User’s Guide 180 Click the number under Index colu mn for settings in detail. Available settings are explained as follows: Item Description Name Type a name for this profile. Maximum 15 characters are allowed. Interface Choose WAN, LAN or Any to display all the available IP objects with the specified interface.
Vigor2920 Series User’s Guide 181 4 4 . . 6 6 . . 3 3 I I P P v v 6 6 O O b b j j e e c c t t You can set up to 64 sets of IPv6 Objects with different conditions. Available settings are explained as follows: Item Description Set to Factory Default Clear all profiles.
Vigor2920 Series User’s Guide 182 Address Type Determine the address type for the IPv6 address. Select Single Address if this object contains one IPv6 address only. Select Range Address if this object contains several IPv6s within a range. Select Subnet Address if this object contains one subnet for IPv6 address.
Vigor2920 Series User’s Guide 183 4 4 . . 6 6 . . 4 4 I I P P v v 6 6 G G r r o o u u p p This page allows you to bind several IPv6 objects into one IPv6 group. Available settings are explained as follows: Item Description Set to Factory Default Clear all profiles.
Vigor2920 Series User’s Guide 184 Name Type a name for this profile. Maximum 15 characters are allowed. Available IPv6 Objects All the available IPv6 objects with the specified interface chosen above will be shown in this box. Selected IPv6 Objects Click >> button to add the selected IPv6 objects in this box.
Vigor2920 Series User’s Guide 185 Available settings are explained as follows: Item Description Name Type a name for this profile. Protocol Specify the protocol(s) which this profile will apply to. Source/Destination Port Source Port and the Destination Port column are available for TCP/UDP protocol.
Vigor2920 Series User’s Guide 186 4 4 . . 6 6 . . 6 6 S S e e r r v v i i c c e e T T y y p p e e G G r r o o u u p p This page allows you to bind several service types into one group. Available settings are explained as follows: Item Description Name Display a name for this profile.
Vigor2920 Series User’s Guide 187 Click the number under Index co lumn for settings in detail. Available settings are explained as follows: Item Description Name Type a name for this profile.
Vigor2920 Series User’s Guide 188 4 4 . . 6 6 . . 7 7 K K e e y y w w o o r r d d O O b b j j e e c c t t You can set 200 keyword object profiles for choosing as black /white list in CSM >>URL Web Content Filter Profile. Available settings are explained as follows: Item Description Name Display a name for this profile.
Vigor2920 Series User’s Guide 189 Item Description Name Type a name for this profile, e.g., game. Contents Type the content for such profile. For example, type gambling as Contents. When you browse th e webp age, the page with gambling information will be watched out and be passed/blocked based on the conf iguration on Firewall settings.
Vigor2920 Series User’s Guide 190 Available settings are explained as follows: Item Description Name Type a name for this group. Available Keyword Objects You can gather keyword objects from Keyword Object page within one keyword group. All the available Keyword objects that you have created will be shown in this box.
Vigor2920 Series User’s Guide 191 Set to Factory Default Clear all profiles. Click the number under Profile column for configuration in details. Available settings are explained as follows: Item Description Profile Name Type a name for this profile.
Vigor2920 Series User’s Guide 192 4 4 . . 7 7 C C S S M M P P r r o o f f i i l l e e C C o o n n t t e e n n t t S S e e c c u u r r i i t t y y M M a a n n a a g g e e m m e e n n t t ( ( C C S S .
Vigor2920 Series User’s Guide 193 Note: The priority of URL Content Filter is higher than Web Conte nt Filter. 4 4 . . 7 7 . . 1 1 A A P P P P E E n n f f o o r r c c e e m m e e n n t t P P r r o o f f i i l l e e You can define policy profiles for IM (Instan t Messenger)/P2P (Peer to Peer)/Protocol/Misc application.
Vigor2920 Series User’s Guide 194 Available settings are explained as follows: Item Description Profile Name Type a name for the CSM profile. Select All Click it to choose all of the items in this page. Clear All Uncheck all the selected boxes. After finishing all the settings here, please click OK to save the configuration.
Vigor2920 Series User’s Guide 195 The items categorized under P2P ----- The items categorized under Protocol ..
Vigor2920 Series User’s Guide 196 The items categorized under Misc ----- 4 4 . . 7 7 . . 2 2 U U R R L L C C o o n n t t e e n n t t F F i i l l t t e e r r P P r r o o f f i i l l e e To provide an.
Vigor2920 Series User’s Guide 197 For example, if you add key words such as “s ex”, Vigor router will limit web access to web sites or web pages such as “www.sex.com”, ”www.backdoor.net/images/sex/p_386.html”. Or you may simply specify the full or partial URL such as “www.
Vigor2920 Series User’s Guide 198 You can set eight profiles as URL content filter. Simply click the index num ber under Profile to open the following web page. Available settings are explained as follows: Item Description Profile Name Type a name for the CSM profile.
Vigor2920 Series User’s Guide 199 Item Description Log None – There is no log file will be recorded for this profile. Pass – Only the log about Pass w ill be recorded in Syslog. Block – Only the log about Block will be recorded in Syslog. All – All the actions (Pass and Block) will be recorded in Syslog.
Vigor2920 Series User’s Guide 200 Item Description noticed that the more simplified the blocking ke yword list is, the more efficiently the Vigor router performs. Web Feature Enable Restrict Web Feature - Check this box to make the keyword being blocked or passed.
Vigor2920 Series User’s Guide 201 4 4 . . 7 7 . . 3 3 W W e e b b C C o o n n t t e e n n t t F F i i l l t t e e r r P P r r o o f f i i l l e e Note: Web Content Filter (WCF) service is powered by Commtouch , the partner of DrayTek. The product name is GlobalView WCF.
Vigor2920 Series User’s Guide 202 Item Description searching when you type URL in browser based on the web content filter profile. Such server is powered by Commtouch. Setup Test Server It is recommended for you to use the default setting, auto-selected.
Vigor2920 Series User’s Guide 203 Note: If the Web Content Filter (WCF) powered by Commtouch is not activated, the above settings will not be valid. Available settings are explained as follows: Item Description Black/White List Enable – Activate white/black list function for such profile.
Vigor2920 Series User’s Guide 204 Item Description Action Pass - allow accessing into the co rresponding webpage with the categories listed on the box below. Block - restrict accessing into the corresponding webpage with the categories listed on the box below.
Vigor2920 Series User’s Guide 205 To activate the function of limit session, simply click Enable and set the default session limit. Available settings are explained as follows: Item Description Enable Click this button to activate the function of limit session.
Vigor2920 Series User’s Guide 206 Item Description Delete Remove the selected settings existing on the limitation list. Administration Message Type the words which will be displayed when reaches the maximum number of Internet sessions permitted. Default Message Click this button to apply the default message offered by the router.
Vigor2920 Series User’s Guide 207 To activate the function of limit bandwidth, simply click Enable and set the default upstream and downstream limit. Available settings are explained as follows: Item Description Bandwidth Limit Enable - Click this button to activate the function of limit bandwidth.
Vigor2920 Series User’s Guide 208 you set for each index. Time Schedu le Index (1-15) in Schedule Setup - You can type in four sets of time schedule for your request. All the schedules can be set previously in Application >> Schedule web page and you can use the number that you have set in that web page.
Vigor2920 Series User’s Guide 209 4 4 . . 8 8 . . 3 3 Q Q u u a a l l i i t t y y o o f f S S e e r r v v i i c c e e Deploying QoS (Quality of Service) management to guarantee that all applications.
Vigor2920 Series User’s Guide 210 However, each node may take different attitude toward packets with high priority marking since it may bind with the business deal of SLA among different DS domain owners.
Vigor2920 Series User’s Guide 211 Item Description service type. Enable the First Priority for VoIP SIP/RTP When this feature is enabled, the VoIP SIP/UDP packets will be sent with highest priority. SIP UDP Port – Set a port number used for SIP. This page displays the QoS settings result of the WAN interface.
Vigor2920 Series User’s Guide 212 Available settings are explained as follows: Item Description Enable the QoS Control The factory default for this setting is checked. Please also define which traffic the QoS Control settings will apply to. IN- apply to incoming traffic only.
Vigor2920 Series User’s Guide 213 Item Description bandwidth. Outbound TCP ACK Prioritize The difference in bandwidth between download and upload are great in ADSL2+ environment. For the download speed might be impacted by the uploading TCP ACK, you can check this box to push ACK of upload faster to speed the network traffic.
Vigor2920 Series User’s Guide 214 3. For adding a new rule, click Add to open the following page. Available settings are explained as follows: Item Description ACT Check this box to invoke these settings. Ethernet Type Please specify which protocol (IPv4 or IPv6) will be used for this rule.
Vigor2920 Series User’s Guide 215 Item Description that you want for using by current QoS. 4. After finishing all the settings here, please click OK to save the configuration.
Vigor2920 Series User’s Guide 216 3. For adding a new service type, click Add to open the following pag e. Available settings are explained as follows: Item Description Service Name Type in a new service for your request. Service Type Choose the type (TCP, UDP or TCP/UDP) for the new service.
Vigor2920 Series User’s Guide 217 4 4 . . 9 9 A A p p p p l l i i c c a a t t i i o o n n s s Below shows the menu items for Applications. 4 4 . . 9 9 . . 1 1 D D y y n n a a m m i i c c D D N N S S The ISP often provides you with a dynamic IP address when you c onnect to the Internet via your ISP.
Vigor2920 Series User’s Guide 218 Item Description Setup Auto-Update interval Set the time for the router to perform auto update for DDNS service. View Log Display DDNS log status. Force Update Force the router updates its information to DDNS server.
Vigor2920 Series User’s Guide 219 Item Description for such account. Service Provider Select the service provider for the DDNS account. Service Type Select a service type (Dynamic, Custom or Static). If you choose Custom, you can modify the domain that is chosen in the Domain Name field.
Vigor2920 Series User’s Guide 220 time. You can inquiry an NTP server (a time serv er) on the Internet to synchronize the router’s clock. This method can only be applied when the WAN connection has been built up. Each item is explained as follows: Item Description Set to Factory Default Clear all profiles and recover to factory settings.
Vigor2920 Series User’s Guide 221 2. The detailed settings of the call sche dule with index 1 are shown below . Available settings are explained as follows: Item Description Enable Schedule Setup Check to enable the schedule. Start Date (yyyy-mm-dd) Specify the starting date of the schedule.
Vigor2920 Series User’s Guide 222 Example Suppose you want to control the PPPoE Internet acce ss connection to be always on (Force On) from 9:00 to 18:00 for whole week. Other time the Internet access connection should be disconnected (Force Down). Office Hour: (Force On) Mon - Sun 9:00 am to 6:00 pm 1.
Vigor2920 Series User’s Guide 223 Item Description authenticate the messages sent be tween them. Both sides must be configured to use the same shared secret. Confirm Shared Secret Re-type the Shared Secret for confirmation. After finished the above settings, click OK button to save the settings.
Vigor2920 Series User’s Guide 224 The UPnP facility on the router enables UPnP awar e applications such as MSN Messenger to discover what are behind a NA T router . The application will also l earn the external IP address and configure port mappings on the rout er .
Vigor2920 Series User’s Guide 225 The UPnP function dynamically adds port ma ppings on behalf of some UPnP-aware applications. When the applications terminate abnormally, these mappings may not be removed. 4 4 . . 9 9 . . 5 5 I I G G M M P P IGMP is the abbreviation of Internet Group Management Protocol .
Vigor2920 Series User’s Guide 226 4 4 . . 9 9 . . 6 6 W W a a k k e e o o n n L L A A N N A PC client on LAN can be woken up by the router it connects. When a user wants to wake up a specified PC through the router, he/she must type correct MAC address of the specified PC on this web page of Wake on LAN of this router.
Vigor2920 Series User’s Guide 227 4 4 . . 9 9 . . 7 7 S S h h o o r r t t M M e e s s s s a a g g e e S S e e r r v v i i c c e e The function of Short Message Service is that Vi gor router sends a message to user’s mobile through specified service provider to assist the u ser knowing the real-time abnormal situations.
Vigor2920 Series User’s Guide 228 Password Type a password that the sender can use to register to selected SMS provider. Destination Number Type the telephone number that you want it to receive the SMS. Quota Type the total number of the messages that the router will send out.
Vigor2920 Series User’s Guide 229 Available settings are explained as follows: Item Description LAN-to-LAN Client Mode Selection Choose the client mode. Route Mode/NAT Mode – If the remote network only allows you to dial in with single IP, please choose this mode, otherwise please choose Route Mode.
Vigor2920 Series User’s Guide 230 Item Description When you finish the mode and profile selection, please click Next to open the following page. In this page, you have to select suitable VPN type for the VPN client profile. There are six types provided here.
Vigor2920 Series User’s Guide 231 z When you choose PPTP (None Encryption) or PPTP (Encryption) , you will see the following graphic: z When you choose IPSec , you will see the following graphic:.
Vigor2920 Series User’s Guide 232 z When you choose L2TP , you will see the following graphic: z When you choose L2TP over IPSec (N ice to Have) or L2TP over IPSec (Must), you will see the following graphic: Available settings are explained as follows: Item Description Profile Name Type a name for such profile.
Vigor2920 Series User’s Guide 233 Item Description VPN Dial-Out Through Use the drop down menu to choose a proper WAN interface for this profile. This setting is useful for dial-out only. WAN1 First - While connecting, the router will use WAN1 as the first channel for VPN connection.
Vigor2920 Series User’s Guide 234 Item Description select PPTP or L2TP with or without IPSec policy above. Password This field is used to authenticate for connection when you select PPTP or L2TP with or without IPSec policy above.
Vigor2920 Series User’s Guide 235 4 4 . . 1 1 0 0 . . 2 2 V V P P N N S S e e r r v v e e r r W W i i z z a a r r d d Such wizard is used to configure VPN settings for VPN server. Such wizard will guide to set the LAN-to-LAN profile for VPN dial in connec tion (from client to server) step by step.
Vigor2920 Series User’s Guide 236 Please choose a Dial-in User Accounts This item is available when you choose Remote Dial-in User (Teleworker) as VPN server mode. There are 32 VPN tunnels for users to set. Allowed Dial-in Type This item is available after you choose any one of dial-in user account profiles.
Vigor2920 Series User’s Guide 237 z When you check PPTP , you will see the following graphic: z When you check PPTP/IPSec/L2TP (three ty pes) or PPTP/IPSec (two types) or L2TP with Policy (Nice to H.
Vigor2920 Series User’s Guide 238 z When you check IPSec , you will see the following graphic: Available settings are explained as follows: Item Description Profile Name Type a name for such profile. The length of the file is limited to 10 characters.
Vigor2920 Series User’s Guide 239 4. After finishing the configuration, please click Next. The confirmation page will be shown as follows. Available settings are explained as follows: Item Descripti.
Vigor2920 Series User’s Guide 240 4 4 . . 1 1 0 0 . . 3 3 R R e e m m o o t t e e A A c c c c e e s s s s C C o o n n t t r r o o l l Enable the necessary VPN service as you need.
Vigor2920 Series User’s Guide 241 Item Description Dial-In PPP Encryption (MPPE Optional MPPE Optional MPPE - This option represents that the MPPE encryption method will be optionally employed in the router for the remote dial-in user.
Vigor2920 Series User’s Guide 242 ¾ Phase 2: negotiation IPSec security methods including Authentication Header (AH) or Encapsulating Security Payload (ESP) for the following IKE exchange and mutual examination of the secure tunnel establishment. There are two encapsulation methods used in IPSec, Transport and Tunnel .
Vigor2920 Series User’s Guide 243 4 4 . . 1 1 0 0 . . 6 6 I I P P S S e e c c P P e e e e r r I I d d e e n n t t i i t t y y To use digital certificate for p eer authentication in either LAN-to-LAN connection or Remote User Dial-In connection, here you may edit a table of peer certificate for selectio n.
Vigor2920 Series User’s Guide 244 Available settings are explained as follows: Item Description Profile Name Type the name of the profile. Accept Any Peer ID Click to accept any peer regardless of its identity. Accept Subject Alternative Name Click to check one specific field of digital signature to accept the peer with matching value.
Vigor2920 Series User’s Guide 245 4 4 . . 1 1 0 0 . . 7 7 R R e e m m o o t t e e D D i i a a l l - - i i n n U U s s e e r r You can manage remote access by maintaining a table of remote user profile, so that users can be authenticated to dial-in via VPN connecti on.
Vigor2920 Series User’s Guide 246 Available settings are explained as follows: Item Description User account and Authentication Enable this account - Check the box to enable this function. Idle Timeout- If the dial-in user is idle over the limitation of the timer, the router will drop this connection.
Vigor2920 Series User’s Guide 247 Item Description Specify Remote Node - Check the checkbox to specify the IP address of the remote dial-in user, ISDN number or peer ID (used in IKE aggressive mode).
Vigor2920 Series User’s Guide 248 Item Description Pre-Shared Key - Check the box of Pre-Shared Key to invoke this function and type in the required characters (1-63) as the pre-shared key.
Vigor2920 Series User’s Guide 249 4 4 . . 1 1 0 0 . . 8 8 L L A A N N t t o o L L A A N N Here you can manage LAN-to-LAN connections by maintaining a table of connection profiles.
Vigor2920 Series User’s Guide 250 To edit each profile: 1. Click each index to edit each profile and you will get the following page. Each LAN-to-LAN profile includes 4 subgroups. If the fields gray out, it means you may leave it untouched. The following explanations will guide you to fill all t he necessary fields.
Vigor2920 Series User’s Guide 251 Item Description WAN1 /WAN2 /WAN3 First - While connecting, the router will use WAN1 /WAN2 /WAN3 as the first channel for VPN connection.
Vigor2920 Series User’s Guide 252 Item Description PING packets to a specified IP address. Enable PING to keep alive is used to handle abnormal IPSec VPN connection disruption. It will help to provide the state of a VPN connection for router’s judgment of redial.
Vigor2920 Series User’s Guide 253 Item Description Method with IPSec Policy. Medium AH (Authentication Header) means data will be authenticated, but not be encrypte d. By default, this option is active. High (ESP-Encapsulating Security Payload)- means payload (data) will be encrypted and authenticated.
Vigor2920 Series User’s Guide 254 Item Description You may specify a value in between 900 and 86400 seconds. IKE phase 2 key lifetime- For security reason, the lifetime of key should be defined. The default value is 3600 seconds. You may specify a value in between 600 and 86400 seconds.
Vigor2920 Series User’s Guide 255 Item Description IPSec Tunnel- Allow the remote dial-in user to trigger an IPSec VPN connection through Internet. L2TP with IPSec Policy - Allow the remote dial-in user to make a L2TP VPN connection through the Internet.
Vigor2920 Series User’s Guide 256 Item Description IPSec Security Method This group of fields is a must for IPSec Tunnels and L2TP with IPSec Policy when you specify the remote node. Medium- Authentication Header (AH) means data will be authenticated, but not be encrypte d.
Vigor2920 Series User’s Guide 257 Item Description Network Mask through the VPN connection. More - Add a static route to direct all traffic destined to more Remote Network IP Addresses/ Remote Network Mask through the VPN connection. This is usually used when you find there are several subnets behind the remote VPN router.
Vigor2920 Series User’s Guide 258 4 4 . . 1 1 0 0 . . 9 9 V V P P N N T T R R U U N N K K M M a a n n a a g g e e m m e e n n t t VPN Backup Management is a backup mechanis m to set multiple VPN tunnels for using as backup tunnel. It can assure the network connection would not be cut off due to network environment blocked by any reason.
Vigor2920 Series User’s Guide 259 Item Description Backup Profile List Set to Factory Default - Click to clear all VPN TRUNK-VPN Backup mechanism profile. No – The order of VPN TRUNK-VPN Backup mechanism profile. Status - “v” means such profile is enabled; “x” means such profile is disabled.
Vigor2920 Series User’s Guide 260 Item Description z VPN ServerIP (Private Ne twork) - VPN Server IP of LAN-to-LAN dial-out profiles. Active Mode - Display available mode for you to choose. Choose Backup for your router. Add Add and save new profile to the backup profile list.
Vigor2920 Series User’s Guide 261 4. Take a look for LAN-to-LAN profiles. Index 1 is chosen as Member1; index 2 is chosen as Member2. For such reason, LAN-to-LAN profiles of 1 and 2 will be expressed in red to indicate that they are fixed.
Vigor2920 Series User’s Guide 262 A A d d v v a a n n c c e e d d B B a a c c k k u u p p After setting profiles for load balance, you can choose any one of them and click Advanced for more detailed configuration. The window s for adv anced load balance and backup are different.
Vigor2920 Series User’s Guide 263 4 4 . . 1 1 0 0 . . 1 1 0 0 C C o o n n n n e e c c t t i i o o n n M M a a n n a a g g e e m m e e n n t t You can find the summary table of all VPN connections. You may disconnect any VPN connection by clicking Drop button.
Vigor2920 Series User’s Guide 264 Item Description Dial - Click this button to execute dial out function. Refresh Seconds Choose the time for refresh the dial inform ation among 5, 10, and 30. Refresh Click this button to refresh the whole connection status.
Vigor2920 Series User’s Guide 265 4 4 . . 1 1 1 1 C C e e r r t t i i f f i i c c a a t t e e M M a a n n a a g g e e m m e e n n t t A digital certificate works as an electronic ID, which is issued by a certification authority (CA). It contains information such as your name , a serial number, expiration dates etc.
Vigor2920 Series User’s Guide 266 Item Description Type in all the information that the window requests. Then click Generate again. Import Click this button to import a saved file as the certification information. Refresh Click this button to refresh the information listed below.
Vigor2920 Series User’s Guide 267 4 4 . . 1 1 1 1 . . 2 2 T T r r u u s s t t e e d d C C A A C C e e r r t t i i f f i i c c a a t t e e Trusted CA certificate lists three sets of trusted CA certificate. To import a pre-saved trusted CA certificate, please click IMPORT to open the following window.
Vigor2920 Series User’s Guide 268 4 4 . . 1 1 1 1 . . 3 3 C C e e r r t t i i f f i i c c a a t t e e B B a a c c k k u u p p Local certificate and Trusted CA certificate for this router can be saved within one file. Please click Backup on the following screen to save them.
Vigor2920 Series User’s Guide 269 z Calling via SIP Servers First, the Vigor V models of yours will have to register to a SIP Registrar by sending registration messages to validate. Then, bo th parties’ SIP proxies will forward the sequence of messages to caller to establish the session .
Vigor2920 Series User’s Guide 270 4 4 . . 1 1 2 2 . . 1 1 D D i i a a l l P P l l a a n n This page allows you to set phone book and digit map for the VoIP function. Click the Phone Book and Digit Map links on the page to access into next pages for dialplan settings.
Vigor2920 Series User’s Guide 271 P P h h o o n n e e B B o o o o k k In this section, you can set your VoIP contacts in the “phonebook”. It can help you to make calls quickly and easily by using “speed-dial” Phone Number .
Vigor2920 Series User’s Guide 272 Dial Out Account Choose one of the SIP accounts for this profile to dial out. It is useful for both sides (caller and callee) that registered to different SIP Registrar servers. If caller and callee do not use the same SIP server, sometimes, the VoIP phone call connection may not succeed.
Vigor2920 Series User’s Guide 273 D D i i g g i i t t M M a a p p For the convenience of user, this page allows users to edit prefix number for the SIP account with adding number, stripping number or replacing number. It is used to help user having a quick and easy way to dial out through VoIP interface.
Vigor2920 Series User’s Guide 274 Item Description OP Number The front number you type here is the first part of the account number that you want to execute special function (according to the chosen mode) by using the prefix number. Min Len Set the minimal length of the dial number for appl ying the prefix number settings.
Vigor2920 Series User’s Guide 275 Item Description Index Display the number link that you can click for configuration. Call Direction Display the direction (IN, OUT, or IN & OUT) for the phone call Barring Type Display the type of the VoIP phone call.
Vigor2920 Series User’s Guide 276 Item Description Specific URI/URL or Specific Number This field will be changed based on the type you selected for barring Type.
Vigor2920 Series User’s Guide 277 R R e e g g i i o o n n a a l l This page allows you to process incoming or out going phone calls by regional. Default values (common used in most areas) will be shown on this web page. You can change the number based on the region that the router is placed.
Vigor2920 Series User’s Guide 278 Item Description Call Forward [All][Act] Dial the number typed in this field to forward all the incoming calls to the specified place. Call Forward [Deact] Dial the number typed in this field to release the call forward function.
Vigor2920 Series User’s Guide 279 P P S S T T N N S S e e t t u u p p Some emergency phone (e.g., 911) or special phone cannot be dialed out b y using VoIP and can be called out through PSTN line only. To solv e this problem, this page allows you to set five sets of PSTN number for dialing without passing through Inter net.
Vigor2920 Series User’s Guide 280 Available settings are explained as follows: Item Description Index Click this link to access into next page for setting SIP account. Profile Display the profile name of the account. Domain/Realm Display the domain name or IP address of the SIP registrar server.
Vigor2920 Series User’s Guide 281 Item Description STUN Server Type in the IP address or domain of the STUN server. External IP Type in the gateway IP address. SIP PING interval The default value is 150 (sec). It is useful for a Nortel server NAT Traversal Support.
Vigor2920 Series User’s Guide 282 SIP Port Set the port number for sending/receiving SIP message for building a session. The default value is 5060. Your peer must set the same value in his/her Registrar. Domain/Realm Set the domain name or IP address of the SIP Registrar server.
Vigor2920 Series User’s Guide 283 Call Forwarding There are four options for you to choose. Disable is to close call forwarding function. Always means all the incoming calls will be forwarded into SIP URL without any reason. Busy means the incoming calls will be forwarded into SIP URL only when the local system is busy.
Vigor2920 Series User’s Guide 284 Voice Active Detector This function can detect if the voice on both sides is active or not. If not, the router will do something to save the bandwidth for other using. Click On to inv oke this function; clic k off to close the function.
Vigor2920 Series User’s Guide 285 Item Description DTMF Relay – Display DTMF mode that configured in the advanced settings page of Phone Index. RTP Symmetric RTP – Check this box to invoke the function.
Vigor2920 Series User’s Guide 286 D D e e t t a a i i l l e e d d S S e e t t t t i i n n g g s s f f o o r r P P h h o o n n e e P P o o r r t t Click the number link for Phone port, you can access into t he following page for configuring Phone settings.
Vigor2920 Series User’s Guide 287 Call Transfer Check this box to invoke this function. C lick hook flash to initiate another phone call. Wh en the phone call connection succeeds, hang up the phone. The other two sides can communicate, then. Default SIP Account You can set SIP accounts (up to six groups) on SIP Account page.
Vigor2920 Series User’s Guide 288 Item Description Also, you can specify each field for your necessity. It is recommended for you to use the default settings for VoIP communication. Volume Gain Mic Gain (1-10)/Speaker Gain (1-10) - Adjust the volume of microphone and speaker by entering number from 1- 10.
Vigor2920 Series User’s Guide 289 Item Description This function is very useful when the network traffic congestion occurs and it still can remain the accuracy of DTMF tone. z SIP INFO - Choose this one then the Vigor will capture the DTMF tone and transfer it into SIP form.
Vigor2920 Series User’s Guide 290 4 4 . . 1 1 2 2 . . 4 4 S S t t a a t t u u s s From this page, you can find codec, connection and ot her important call status for each port. Each item is explained as follows: Item Description Refresh Seconds Specify the interval of refresh time to obtain the latest VoIP calling information.
Vigor2920 Series User’s Guide 291 PeerID The present in-call or out-call peer ID (the format may be IP or Domain). Elapse The format is represented as hours:minutes:seconds. Tx Pkts Total number of transmitted voice packets during t his connection session.
Vigor2920 Series User’s Guide 292 M M u u l l t t i i p p l l e e S S S S I I D D s s Vigor router supports four SSID settings for wireless connections. Each SSID can be defined with different name and download/upload rate for selecting by stations connected to the route r wirelessly.
Vigor2920 Series User’s Guide 293 the confidential information leakage. For a more flexible deployment, you may add filters of MAC addresses to isolate users’ access from wired LAN. Manage Wireless Stations - Station List will display all the station in your wireless network and the status of their connection.
Vigor2920 Series User’s Guide 294 Available settings are explained as follows: Item Description Enable Wireless LAN Check the box to enable wireless function. Mode At present, the router can connect to 11n Only, 11g Only, Mixed (11b+11g), Mixed (11a+ 11n), Mixed (11g+11n), and Mixed (11b+11g+11n) stations simultaneously.
Vigor2920 Series User’s Guide 295 Item Description Long Preamble This option is to define the length of the sync field in an 802.11 packet. Most modern wireless network uses short preamble with 56 bit sync field instead of long pream ble with 128 bit sync field.
Vigor2920 Series User’s Guide 296 Item Description environment of the network. Rate Control It controls the data transmission rate through wireless connection. Upload – Check Enable and type the transmitting rate for data upload. Default value is 30,000 kbps.
Vigor2920 Series User’s Guide 297 4 4 . . 1 1 3 3 . . 3 3 S S e e c c u u r r i i t t y y This page allows you to set security with diffe rent modes for SSID 1, 2, 3 and 4 respectively. After configuring the correct settings, please click OK to save and invoke it.
Vigor2920 Series User’s Guide 298 Available settings are explained as follows: Item Description Mode There are several modes provided for you to choose. Note: You should also set RADIUS Server simultaneously if 802.1x mode is selected. Disable - Turn off the encryption mechanism.
Vigor2920 Series User’s Guide 299 Item Description as "0x321253abcde..."). WEP 64-Bit - For 64 bits WEP key, either 5 ASCII characters, such as 12345 (or 10 hexadecimal digitals leading by 0x, such as 0x4142434445.
Vigor2920 Series User’s Guide 300 Item Description (expressed by MAC addresses) listed in the box can be grouped under different wireless LAN. For example, they can be grouped under SSID 1 and SSID 2 at the same time if you check SSID 1 and SSID 2. MAC Address Filter Display all MAC addresses that are edited before.
Vigor2920 Series User’s Guide 301 4 4 . . 1 1 3 3 . . 5 5 W W P P S S WPS (Wi-Fi Protected Setup) provides easy procedure to m ake network connection between wireless station and wireless access point (vigor router) with the encryption of WPA and WPA2.
Vigor2920 Series User’s Guide 302 z If you want to use PIN code, you have to know the PIN code specified in wireless client. Then provide the PIN code of the wireless clie nt you wish to connect to the vigor router.
Vigor2920 Series User’s Guide 303 Item Description WPS Status Display related system information for WPS. If the wireless security (encryption) function of the router is properly configured, you can see ‘Configured’ message here. SSID Display the SSID1 of the router.
Vigor2920 Series User’s Guide 304 4 4 . . 1 1 3 3 . . 6 6 W W D D S S WDS means Wireless Distribution System. It is a protocol for connecting two access points (AP) wirelessly. Usually, it can be used for the following application: y Provide bridge traffic between two LANs through the air.
Vigor2920 Series User’s Guide 305 The major difference between these two modes is that: while in Repeater mode, the packets received from one peer AP can be repeated to another peer AP through WDS links. Yet in Bridge mode, packets received from a WDS link will only be for warded to local wired or wireless hosts.
Vigor2920 Series User’s Guide 306 Available settings are explained as follows: Item Description Mode Choose the mode for WDS setting. Disable mode will not invoke any WDS setting. Bridge mode is designed to fulfill the first type of application. Repea ter mode is for the second one.
Vigor2920 Series User’s Guide 307 Item Description Key - Type 8 ~ 63 ASCII characters or 64 hexadecimal digits leading by “0x”. Bridge If you choose Bridge as the connecting mode, please type in the peer MAC address in these fields. Four peer MAC addresses are allowed to be entered in this page at one time.
Vigor2920 Series User’s Guide 308 4 4 . . 1 1 3 3 . . 7 7 A A d d v v a a n n c c e e d d S S e e t t t t i i n n g g This page allows users to set advanced se ttings such as operation mode, channel bandwidth, guard interval, and aggregation MSDU for wireless data transmission.
Vigor2920 Series User’s Guide 309 4 4 . . 1 1 3 3 . . 8 8 W W M M M M C C o o n n f f i i g g u u r r a a t t i i o o n n WMM is an abbreviation of Wi-Fi Multimedia. It defines the priority levels for four access categories derived from 802.1d (prioritization tabs).
Vigor2920 Series User’s Guide 310 Item Description smaller; however, the difference between AC_BE and AC_BK categories must be greater. Txop It means transmission opportunity. For WMM categories of AC_VI and AC_VO that need higher priorities in data transmission, please set greater value for them to get highest transmission opportunity.
Vigor2920 Series User’s Guide 311 Available settings are explained as follows: Item Description Scan It is used to discover all the connected AP. The results will be shown on the box above this button. Statistics It displays the statistics for the channels used by APs.
Vigor2920 Series User’s Guide 312 4 4 . . 1 1 3 3 . . 1 1 0 0 S S t t a a t t i i o o n n L L i i s s t t Station List provides the knowledge of connecting wire less clients now along with its status code. There is a code summary belo w for explanation.
Vigor2920 Series User’s Guide 313 4 4 . . 1 1 3 3 . . 1 1 1 1 W W e e b b P P o o r r t t a a l l This page allows you to specify an URL fo r accessing into or display a message when a wireless user connects to Internet through this router.
Vigor2920 Series User’s Guide 314 4 4 . . 1 1 4 4 U U S S B B A A p p p p l l i i c c a a t t i i o o n n USB storage disk connected on Vigor router can be regarded as a server. By way of Vigor router, clients on LAN can access, write and read data stored in USB storage disk with different applications.
Vigor2920 Series User’s Guide 315 Item Description Default Charset is for English based file name. For Simplified Chinese file/directory names, please choose GB2312; for Traditional Chinese file/directory names, choose BIG5. Samba Service Settings Click Enable to invoke samba service via the router.
Vigor2920 Series User’s Guide 316 Set to Factory Default Click it to clear all profiles settings. Click any index number to access into the configuration page. Available settings are explained as follows: Item Description FTP/Samba User Enable – Click this button to activate this profile (account) for FTP service or Samba User service.
Vigor2920 Series User’s Guide 317 Item Description ON , you cannot type any new folder name in this field. Only “/” can be used in such case. You can click to open the following dialog to add any new folder which can be specified as the Home Folder.
Vigor2920 Series User’s Guide 318 Available settings are explained as follows: Item Description Refresh Click this icon to refresh files list. Back Click this icon to return to the upper directory. Create Click this icon to add a new folder. Current Path Display current folder.
Vigor2920 Series User’s Guide 319 4 4 . . 1 1 4 4 . . 5 5 S S y y s s l l o o g g E E x x p p l l o o r r e e r r Such page provides real-time syslog and displays the information on the screen.
Vigor2920 Series User’s Guide 320 F F o o r r U U S S B B S S y y s s l l o o g g This page displays the syslog recorded on the USB storage disk. Each item is explained as follows: Item Description Time Display the time of the event occurred. Log Type Display the type of the record.
Vigor2920 Series User’s Guide 321 4 4 . . 1 1 5 5 S S y y s s t t e e m m M M a a i i n n t t e e n n a a n n c c e e For the system setup, there are several items that you have to know the way of configuration: Status, Administrator Password, Configuration Backup, Syslog, Time setup, Reboot System, Firmware Upgrade.
Vigor2920 Series User’s Guide 322 Item Description LAN MAC Address - Display the MAC address of the LAN Interface. IP Address - Display the IP address of the LAN interface.
Vigor2920 Series User’s Guide 323 4 4 . . 1 1 5 5 . . 2 2 H H T T T T P P S S E E n n c c r r y y p p t t i i o o n n S S e e t t u u p p The encryption methods configured in this pa ge would influence the access of HTTP web site and the encryption algorithm used by SS L Tunnel.
Vigor2920 Series User’s Guide 324 4 4 . . 1 1 5 5 . . 3 3 T T R R - - 0 0 6 6 9 9 This device supports TR-069 standard. It is very convenient for an administrator to m anage a TR-069 device through an Auto Configuration Server, e.
Vigor2920 Series User’s Guide 325 Item Description Server Port – Type the port number of the STUN server. Minimum Keep Alive Period – If STUN is enabled, the CPE must send binding request to the server for the purpose of maintaining the binding in the Gateway.
Vigor2920 Series User’s Guide 326 4 4 . . 1 1 5 5 . . 5 5 U U s s e e r r P P a a s s s s w w o o r r d d Sometimes, you may want to access into User Mode to configure the web settings for some reason. Vigor router allows you to set new user password to login into the WUI t o fit your request.
Vigor2920 Series User’s Guide 327 3. The following screen will appear. Simply click OK . 4. Log out Vigor router Web Configurator. 5. The following window will be open to ask for username and password. Type the new user password in the filed of Password and click Login .
Vigor2920 Series User’s Guide 328 Settings to be configured in User Mode will be less than settings in Admin Mode. Only basic configuration settings will be available in User Mode. Setting in User Mode can be configured as same as in Admin Mode. 4 4 .
Vigor2920 Series User’s Guide 329 Available settings are explained as follows: Item Description Enable Check this box to enable the login customization function. Login Description Type a brief description (e.g., Welcome to DrayTek) which will be shown on the heading of the login dialog.
Vigor2920 Series User’s Guide 330 2. Click Backup button to get into the following dialog. Click Save button to open another dialog for saving configuration as a file. 3. In Save As dialog, the default filename is config.cfg . You could gi ve it another name by yourself.
Vigor2920 Series User’s Guide 331 R R e e s s t t o o r r e e C C o o n n f f i i g g u u r r a a t t i i o o n n 1. Go to System Maintenance >> Configuration Backup . The following windows will be popped-up, as shown below. 2. Click Browse button to choose the correct configura tion file for uploading to the r outer.
Vigor2920 Series User’s Guide 332 Item Description Syslog server. Check USB Disk to save the log to the attached USB storage disk. Router Name Display the name for such router configured in System Maintenance>>Management.
Vigor2920 Series User’s Guide 333 3. From the Syslog screen, select the router you want to monitor. Be reminded that in Network Information , select the network adapter used to connect to the router. Otherwise, you won’t succeed in retrieving information from the router.
Vigor2920 Series User’s Guide 334 Item Description Server IP Address Type the IP address of the time server. Time Zone Select the time zone where the router is located. Enable Daylight Saving Check the box to enable the dayl ight saving. Such feature is available for certain area.
Vigor2920 Series User’s Guide 335 Item Description specify. Disable PING from the Internet - Check the checkbox to reject all PING packets from the Internet. For security issue, this function is enabled by default. Access List You could specify that the system administrator can only login from a specific host or network defined in the list.
Vigor2920 Series User’s Guide 336 4 4 . . 1 1 5 5 . . 1 1 1 1 R R e e b b o o o o t t S S y y s s t t e e m m The Web Configurator may be used to restart your router. Click Reboot System from System Maintenance to open the following page. Index (1-15) in Schedule Setup - You can type in four sets of time schedule for performing system reboot.
Vigor2920 Series User’s Guide 337 4 4 . . 1 1 5 5 . . 1 1 2 2 F F i i r r m m w w a a r r e e U U p p g g r r a a d d e e You have to visit DrayTek website periodically to check if there is any new released firmware offered for your Vigor router to have newest features.
Vigor2920 Series User’s Guide 338 4 4 . . 1 1 5 5 . . 1 1 3 3 A A c c t t i i v v a a t t i i o o n n There are three ways to activate WCF on vigor router, using Service Activation Wizard , by means of CSM>>Web Content Filter Profile or via System Maintenance>>Activation .
Vigor2920 Series User’s Guide 339 Below shows the successful activation of Web Content Filter: 4 4 . . 1 1 6 6 D D i i a a g g n n o o s s t t i i c c s s Diagnostic Tools provide a useful way to view or diagnose the status of your Vigor router. Below shows the menu items for Diagnostics.
Vigor2920 Series User’s Guide 340 4 4 . . 1 1 6 6 . . 1 1 D D i i a a l l - - o o u u t t T T r r i i g g g g e e r r i i n n g g Click Diagnostics and click Dial-out Triggering to open the web page. The internet connection (e.g., PPPoE) is triggered by a package sending from the source IP address.
Vigor2920 Series User’s Guide 341 4 4 . . 1 1 6 6 . . 2 2 R R o o u u t t i i n n g g T T a a b b l l e e Click Diagnostics and click Routing Table to open t he web page. Each item is explained as follows: Item Description Refresh Click it to reload the page.
Vigor2920 Series User’s Guide 342 4 4 . . 1 1 6 6 . . 3 3 A A R R P P C C a a c c h h e e T T a a b b l l e e Click Diagnostics and click ARP Cache Table to view the content of the ARP (Address Resolution Protocol) cache held in the router. Th e table shows a mapping between an Ethernet hardware address (MAC Address) and an IP address.
Vigor2920 Series User’s Guide 343 Item Description Refresh Click it to reload the page. 4 4 . . 1 1 6 6 . . 5 5 D D H H C C P P T T a a b b l l e e The facility provides information on IP address as signments. This information is helpful in diagnosing network problems, such as IP address conflicts, etc.
Vigor2920 Series User’s Guide 344 Refresh Click it to reload the page. 4 4 . . 1 1 6 6 . . 6 6 N N A A T T S S e e s s s s i i o o n n s s T T a a b b l l e e Click Diagnostics and click NAT Sessions Table to open the list page.
Vigor2920 Series User’s Guide 345 4 4 . . 1 1 6 6 . . 7 7 D D a a t t a a F F l l o o w w M M o o n n i i t t o o r r This page displays the running procedure for the IP address monitored and refreshes the data in an interval of several seconds. The IP address listed here is configured in Bandwidth Management.
Vigor2920 Series User’s Guide 346 Item Description Refresh Click this link to refr esh this page manually. Index Display the number of the data flow. IP Address Display the IP address of the monitored device. TX rate (kbps) Display the transmission speed of the monitored device.
Vigor2920 Series User’s Guide 347 4 4 . . 1 1 6 6 . . 8 8 T T r r a a f f f f i i c c G G r r a a p p h h Click Diagnostics and click Traffic Graph to pen the web page. Choose WAN1/WAN2/WAN3 Bandwidth, Sessions, daily or weekly for viewing different traffic graph.
Vigor2920 Series User’s Guide 348 4 4 . . 1 1 6 6 . . 9 9 P P i i n n g g D D i i a a g g n n o o s s i i s s Click Diagnostics and click Ping Diagnosis to pen the web page. Each item is explained as follows: Item Description IPV4 /IPV6 Choose the protocol for such function.
Vigor2920 Series User’s Guide 349 want to ping. IP Address Type in the IP address of the Host/IP that you want to ping. Ping IPv6 Address Type the IPv6 address that you want to ping. Run Click this button to start the ping work. The result will be displayed on the screen.
Vigor2920 Series User’s Guide 350 Each item is explained as follows: Item Description IPv4 / IPv6 Choose the protocol for such function. Trace through Use the drop down list to choose the interface that you want to ping through. Protocol Use the drop down list to choose the protocol that you want to ping through.
Vigor2920 Series User’s Guide 351 4 4 . . 1 1 6 6 . . 1 1 1 1 S S y y s s l l o o g g E E x x p p l l o o r r e e r r Such page provides real-time syslog and displays the information on the screen. F F o o r r W W e e b b S S y y s s l l o o g g This page displays the time and message fo r User/Firewall/call/WAN/VPN settings.
Vigor2920 Series User’s Guide 352 F F o o r r U U S S B B S S y y s s l l o o g g This page displays the syslog recorded on the USB storage disk. Available parameters are explained as follows: Item Description Time Display the time of the event occurred.
Vigor2920 Series User’s Guide 353 4 4 . . 1 1 7 7 E E x x t t e e r r n n a a l l D D e e v v i i c c e e s s Vigor router can be used to connect with many ty pes of external devices. In order to control or manage the external devices conveniently, open External Devices to make detailed configuration.
Vigor2920 Series User’s Guide 354 This page is left blank..
Vigor2920 Series User’s Guide 355 T T r r o o u u b b l l e e S S h h o o o o t t i i n n g g situations if you cannot access into the Internet af ter installing the router and finishing the web configuration. Please follow sections below to ch eck your basic installation status stage by stage.
Vigor2920 Series User’s Guide 356 5 5 . . 2 2 C C h h e e c c k k i i n n g g I I f f t t h h e e N N e e t t w w o o r r k k C C o o n n n n e e c c t t i i o o n n S S e e t t t t i i n n g g s s .
Vigor2920 Series User’s Guide 357 4. Select Obtain an IP address automatically and Obtain DNS server address automatically . F F o o r r M M a a c c O O S S 1. Double click on the current used Mac OS on the desktop. 2. Open the Application folder and get into Network .
Vigor2920 Series User’s Guide 358 5 5 . . 3 3 P P i i n n g g i i n n g g t t h h e e R R o o u u t t e e r r f f r r o o m m Y Y o o u u r r C C o o m m p p u u t t e e r r The default gateway IP address of the router is 192.168.1.1. For some reason, you might need to use “ping” command to check the link status of the router.
Vigor2920 Series User’s Guide 359 5 5 . . 4 4 C C h h e e c c k k i i n n g g I I f f t t h h e e I I S S P P S S e e t t t t i i n n g g s s a a r r e e O O K K o o r r N N o o t t Open WAN >> Internet Access page and then check whether the ISP settings are set correctly.
Vigor2920 Series User’s Guide 360 T T r r a a n n s s m m i i s s s s i i o o n n R R a a t t e e i i s s n n o o t t f f a a s s t t e e n n o o u u g g h h Please connect your Notebook with 3G USB Modem to test the connection speed to verify if the problem is caused by Vigor2920.
Vigor2920 Series User’s Guide 361 H H a a r r d d w w a a r r e e R R e e s s e e t t While the router is running (ACT LED blinking), press the Factory Reset button and hold for more than 5 seconds. When you see the ACT LED blinks rapidly, please release the button.
Vigor2920 Series User’s Guide 362.
デバイスDraytek Vigor2920nの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Draytek Vigor2920nをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはDraytek Vigor2920nの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Draytek Vigor2920nの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Draytek Vigor2920nで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Draytek Vigor2920nを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はDraytek Vigor2920nの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Draytek Vigor2920nに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちDraytek Vigor2920nデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。