DukaneメーカーDVP303Aの使用説明書/サービス説明書
ページ先へ移動 of 22
Model D VP303A Model D VP303A User's Manual Digital Visual Presenter.
.
Table of Contents 1__INTRODUCTION ............................................................... 2 1-1 I NTRODUCTION ........................................................................................ 2 1-2 C ERTIFICATION .......................
1__Introduction 1-1 Introduction This equipment generates and uses radio-frequency energy and, if not installed and used in accordance with the instruction manual, may c ause interference to radio and television reception.
7. Do not overload wall outlets. Do not us e extended extension leads or multi-way plug boards. Fire or electric shock may be possible. 8. Do not block any cabinet opening with any kind of objects. 9. Never allow liquid of any kind to spill into the Digital Presenter.
1-5 Specification Image____________________ ____________________ _________________________ Pick-up Device 1/3” progress scan CCD Effective Pixels 1077 ( H ) x 788 ( V ) Frame Rate 15 Frames/sec White Balance Auto/Manual Exposure Auto/Manual Image Mode Photo/Text//Gary/Film/Slide Freeze Yes Analog RGB Output XGA 75Hz SVGA 75Hz H.
2__Package Content Make sure that the package con tains the following items Digital Presenter ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ User’s manual CD Remote controller Power cable VGA cable USB cable R.
3__Product Overview 3-1 Front/Top View 1. Camera head 2. Attach Lens 3. Camera arm 4. Lamps 5. Base light in platform 6. Handle 7. Control panel 8. Lamp Lock 9. Remote controller slot Fi g ure: 3 - 2 Fi g ure: 3 - 1 3-2 Control panel 1 (Power button): Turn on/ off the Digital Presenter.
3-3 Rear View Fi g ure: 3 - 3 1 VGA INPUT Connect the connector to the VGA output connector of another VGA output device. When an input device is selected, the image is shown through the VGA IN connector. 2 VGA OUTPUT Connect The connector to the input connector of a display device.
3-4 Infrared Remote Control Fi g ure: 3 – 4 Button Description Button Description Button Description 1. Power Turn on a nd off t he Digital Presenter. 8. Zoom Out Make the image smaller. 15. Play Replay the s tored image. 2. AF Auto Focu s 9. Focus + Move the focus to a nearer area .
4__Installation 4-1 Setting Up the Digital Presenter 1. Pull up the arm. Adjust the position and height (the height should be 48.5 cm for operation) of the arm by moving the 3-section joint. 2. Turning the camera he ad toward the platform. Fi g ure: 4 – 1 Note: The angle of th e camera head is limit ed.
5__Using the Digital Presenter This chapter shows you the basic and advanced f unctions of the Digital Presenter as and how to use the menu, the mouse, and the Presenter USB/RS232 interface. 5-1 Getting Started For Presenting Printed Materials: 1. Power on the Digital Presenter.
OSD Menu Layer 1 Layer 2 Layer 3 Gamma Photo / Text Normal Gary Film Display Image Slide Layer 1 Layer 2 Source Presenter / VGA In Layer 1 Layer 2 Layer 3 Capture Processing Playback Delete Storage De.
Option 1:Press the keypad “AF” fo r executing the AF function. Option 2:Using the remote controller “AF” button for auto focus function. Besides, the digital presenter will execute Auto Focus when user adjusting the zoom in/out. Focus In some cases, you may have to adjust the focus manually.
To capture an image: Option 1:If you are using the mouse, click the "Storage". Click "Capture" to capture the current image display. W hen the "image capturing" function is in progress, "Processing" will be shown just at t he place of "Capture" location.
Flip: Press ”Flip” on the Remote Controller Se lect to rotate the image by 180º. Lamp: Press ”Lamp” on the Remote Controller to turn on and off the lamps and the backlight. Source: Option 1:Use Source on the remote cont rol to switch the image input device (Presenter/VGA In).
Language: Use this function to select an OSD language from several options . There are 8 kinds of languages English, Deutsch, Francais, Italiano, Eapanol, Русский , , . Output Format: Use Output Format to choose the output mode: XGA (1024 x 768), or SVGA (800 x 600).
2.2 Select the Lamp status, as shown in the following figure: Up p e r B ackl i gh t Lam p off Lam p 2.3 If you select Upper (Upper Lamp), press on your remote control until is highlighted. Press Enter to show Gamma options. Select one, as shown in the following figure.
Upper Lamp 2.7 Proceed with your se tting or stop doing so: 2.7.1 If you have selected Save in St ep 2.6, a "Save complete" messages appears for three seconds. Then the screen to the one as shown in 2.2. You may select or press Menu on the remote control to return to Layer 1; or, se lect to configure another lamp.
6__Q & A 1 Q: The ( ) system indicator does not come on. A: No power is coming on. Check that the power cord is connected secu rely both at the power outlet and the PS. 2 Q: No image appears on the screen. A: I. Make sure the power is inst alled correctly and securely.
.
Dukane Corporation Audio Visual Products Division 2900 Dukane Drive St. Charles, IL 60174-3395 E-mail: avsales@dukcorp.com Phone: (630) 762-4040 Orders: (800) 676-2485 Fax: (630) 584-5156 Parts & .
デバイスDukane DVP303Aの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Dukane DVP303Aをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはDukane DVP303Aの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Dukane DVP303Aの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Dukane DVP303Aで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Dukane DVP303Aを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はDukane DVP303Aの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Dukane DVP303Aに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちDukane DVP303Aデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。