DXG TechnologyメーカーDXG-A85V HDの使用説明書/サービス説明書
ページ先へ移動 of 78
DXG-A85V HD User’s Manual DXG USA.
.
i About this manual ............................................................. v Copyright ........................................................................... v Precau tions ..................................................................
ii 2.6.2 Setting the language ................................ 16 2.6.3 Setting the beep ........................................ 17 2.7 Shoot/Playback video ........................................... 18 2.7.1 Shooting a video clip ..................
iii 3.2.4 Using the zoom function ......................... 30 3.2.5 Using the LED light module ................... 30 3.2.6 Using the Flash module, auto and force 31 3.2.7 Using the Stabilizer fu nction .................. 31 3.2.8 Quick access controls .
iv 4.3.4 Color effect ............................................... 47 4.3.5 Selftimer .................................................... 48 4.3.6 Aspect Ratio .............................................. 49 4.3.7 Face Detection ................
v Preface Congratulatio ns on your p urchase of t his advance d camcorder. Make sure that you read th is manual carefully and keep it in a safe place for future reference. About this manual Every effort has been made to ensure that the contents of this manual are correct and up t o date.
v i Precautions General precautions • Do not use or st o re the product in dust y, dirty, or sandy areas, as its componen ts may be da maged. • Do not stor e the product i n a hot e nvironment . High temperatures can shorten the life of electronic devices, damage batteries and warp or melt certain plastics.
vii Notes on the LCD Screen Caution must be observed when dealing with the fluid contained in the LCD. Ensure that fluid does not leak if the screen becomes cracked or damaged. If this occurs, follow these steps: • If the fluid makes contact with skin, wipe it with a clean cloth then rinse with a large amount of water.
viii • Remove the battery to avoid the fluid leakage if the camcorder is not going to be used for a long time. • If the battery is crushed or damag ed, remove it immedi ately to avoid the battery flu id leakage and abnormal expansion. Before You Start Take some test shots before perform ing a formal recording.
1 Introduction Read this se ction to lea rn about the features a nd functions of the camcorder. This chapter also cove rs syste m requirements, package contents, and descriptio n of the ha rdware compo nents.
• Support Auto Focus (AF) Lock function • Support Manual Focus (MF) function 1.3 Unpacking the camcorder The following items should be presen t in the package.
1.4 About the camcorder Refer to the following illustrations to familiarize yourself with the buttons and controls o f this camc order. 1.4.1 Front and To p view Shut ter button LED light Microphone Flash Lens Speaker Zoom / Volume b utton 1.
1.4.3 Lef t view Hand str ap 1.4.4 Back view Mode dial DC-in /AV/USB Outp u t HD Outpu t Joysti ck REC/STOP button Power/ Camera status LED LCD display Playback button Battery cover Batter y cover lat.
1.4.5 Control Panel SD card cover latch Display butto n Power butto n LED light Flash butto n Menu button 5.
1.4.6 Adjus ting the LCD display Flip and twist the LCD screen as shown while capturing a still image or recording a video clip. 6.
See the table below for a description of each button’s function. Button Name Function Power button Press to turn power on/off. Menu button Press to display main OSD menus. Mode dial Use to turn Camcorder, Camera , and SET modes. Joystick z In Camcorder and Camera mode: 1.
8 direction keys appea r on the LCD screen. You may press the joystick to move the image. (up/down ↔ left/right). 3. Move the joystick up to enter the Thumbnail mode. 4. In the Thumbnail mode, move up, down, left, right to select the thumbnail images and then press the center joystick button to view the image in full screen mode.
Shutter button z In Camera mode, press to take a photo. z In Camcorder mode, you can also press to take a photo b efore and during recording a video clip. REC/Stop button z In Camcorder mode, press to start recording a video clip . Playback button In Camcorder and Camera mode, press to enter playback mode.
Flash button z In Camera modes, press the button to switch between the flash modes. Battery cover latch z Slide the latch to open the battery card cover when you insert/remove the battery.
11 1.4.7 Abou t the LEDs The following table describes the camcorder LEDs: LED Color Definition Power / Rec./ Camcorder Status Green Power-on Green/ Red Blinking Recording Red Camcorder busy Self-timer Red Blinking Self-timer is activated. Red Blinking Rapidly 2 seconds self-timer remaining.
2 Getting started Read this section to learn how to start using the camcorder. This section covers basic f unctions suc h as switching on, i nserting the battery and memory cards, and configuring preliminary settings. See later chapters for advanced functions.
2.2 Inserting the battery This camcorder is designed to use a rechargeable Li-ion battery. Only use the batteries supplied or similar batteries recom mended by the manufac turer or your dealer . z Note : Install the battery exactly as described here. Installing the battery incorrectly could cause damage to the camcorder a nd possibly start a fire.
2.3 Charging the battery You can charge the battery with the charging unit provided. Follow the steps below to charge your battery. 1. Insert the Li-io n batter y into the c harging bay. Connect one end of the power cord to the charging unit and then plug the other end to the wall outlet as shown.
2.6 Before you start Before you star t using the ca mcorder, some ba sic settings such as date and time, languages and beep function need to be configured. 2.6.1 Setting the date an d time 1. Turn on the camcorder, and mov e the mode dial t o SET . Move the joystic k left and right or tap the screen to highlight Date / Time .
2.6.2 Setting the language 1. Turn on the camcorder, and mov e the mode dial t o SET . Move the joystic k left and right or tap the screen to highlight Language .
2.6.3 Setting the beep 1. Turn on the camcorder, and mov e the mode dial t o SET . Move the joysti ck left a nd right or ta p the screen t o highlight Beep . Press the center joystick button to enter the Beep menu. 2. Move the joystick left and right to select Beep Off or Beep On options.
2.7 Shoot/Playback video 2.7.1 Shoo ting a video clip 1. Turn on the camcorder and move the mo de dial to Camcorder mode. Camc o r d er mod e 2. Use the LCD screen to frame the video. 3. Press the REC/STOP button to start r ecording. 4. Press the REC/STOP button again to stop recording.
WVGA WQVGA 16:9 ratio 4:3 ratio 72 0 P 1080P 4. Before shooting a video clip, you can still take a photo in Camcorder mode. 3. The LCD preview and the ratio of a still-image capture can vary depending on the different video resolution settings.
2.7.2 Pla ying the vide o clip 1. In Camcorder mode, press the Playback bu tton. Th e most recent file displays on the LCD screen. Camcorder playback mode indicat or 2. Move the joystic k right and l eft to or tap / select a desired video clip and press the center joystick button or .
8. During playback, press the zoom button left or right to adjust volume. 2.8 Taking/viewing pictures 2.8.1 Takin g a still picture 1. Turn on the camcorder and move the Mode Dial to Camera mode. Camera mode 2. Use the LCD screen to frame the picture.
2.8.2 Vi ewing images 1. In Camera mode, press the Pl ayback button . The most recent image displays on the LCD screen. Camera Playback mode 2. Press the joysti ck right a nd left or tap / to scroll through the images. 3. Move the Zoom butto n right to z oom in the picture.
2.9 Connecting to a computer Read this section to learn how to transfer files to a PC, show the video clips or photos on a TV. Connect the camcorder to a computer with the USB cable provided. 2.10 Connecting to a standard TV Connect the camcorder to a stand ard TV as sho wn with t he AV cable provided.
2.11 Connecting to a HDTV Read this section to learn how to show the video clips or photos on a HDTV. Connecting to a HDTV offers the high resolutio n for displaying the video clips or photos. Connect the camcorder to a HD T V as shown wi th the HD MI cable provided.
3 Using the camcorder Read this section to learn how to use the camcorder. 3.1 Camcorder mode Use this mode to capture video clips or record voice and store them on an SD card. 3.1.1 Camco rder mode Use the following picture to familiarize yourself with the Camcorder mode icons a nd symb ols.
3 Stabilizer indicator 4 Dual video indicator 5 Color effect indica tor 6 Quality indicator 7 / Auto Focus (AF) lock or Manual Focus (MF) indicator 8 LED light indicator 9 Menu indicator .
2. Aim the camera on your desired subject. 3. Press the REC b utton to re cord video or the shut ter button to ca pture image . 3.1.3 Using Manual Focus The Manual Focus (MF) function is used to manually set the focus. 1. Press right repeatedly until MF is displayed on screen.
3.1.4 Using the zoom function The camcorder is equipped with 5x optical zoom and 10X digital zoom. Move the Zoom butto n right to g et closer to a subje ct. Move the Zoom butto n left to move away from a subject. 3.1.5 Using the LED light Use the LED light to illuminate subjects in dark environments.
3.2 Camera mode Use Camera mode to capture still pictures and store them in the on an SD card. 3.2.1 Cam era mode icons Use the following picture to familiarize yourself with the Camera mode icons and symbols. 18 Came ra mode 1 11 9 8 7 10 2 4 3 5 15 14 13 12 16 17 6 See the table below for a description of each icon and symbol.
6 Face tracking indicator 7 Color effect indica tor 8 Quality indicator 9 / Auto Focus (AF) lock or Manual Focus (MF) indicator 10 LED light indicator 11 Flash indicator 12 Menu indicator .
See section 3.1.5 “ Usin g the LED light ”. 3.2.6 Using the Flash module, a uto and force See section 3.1.6 “Using the Flash module, auto and force”. 3.2.7 Using the Stabilizer func tion See section 3.1.7 “Using the Stabilizer function”. 3.
Camcorder mode: See the table below for a description of each icon and symbol. 1 Displays the elapsed time wh ile playing the video cli p 2 Fast forwar d icon. Tap to fa st forwar d the video clip 3 Slow motion icon. Tap to play the video in slow motion 4 Stop icon.
Camera Playbac k mode Use Camera Playba ck mode to review all the image files stored in the camcorder . 3.3.2 Camera Pl ayba ck mod e ico ns Refer to the following picture to familiarize yourself with the Camera Playback mo de icons and sy mbols. 5 2 4 1 3 6 7 See the table below for a description of each icon and symbol.
3.4 Thumbnail mode When in Camera Playback or Ca mcorder Playback mo des, mo ve the joystick up or tap to show images as thumbnails. 1. Turn on the camcorder and make sure it is in Camera Playback or Camcorder Pla yback mode. 2. The most recent image /video clip displays on the screen.
4 Using the menus Read this section to learn how to configure the camcorder settings and use the advanced features. 4.1 Camcorder menu When in Camcorder mode, press the Menu button or tap to show the camcorder options menu. 4.1.1. Video resolution Use the re solutio n option to deter mine the r esolutio n of the captured video.
5. Press the Enter button to exit th e menu. 3 6 z Note : In 1080P mode, you can capture a photo when the video is recording. The still image resolution is 2560*1440. 4.1.2. Video quality There are two different levels of video quality setting. Higher quality video needs mor e memory storage spa ce.
4.1.3. White balance Use this option to correct color difference for different lighting conditions. When white balance is set to Auto , the camcorder automatically compensates for different lighting conditions. 1. Turn the camcorder on and ensure it is in Camcorder mode.
4.1.4. Color effect The camcorder can capture standard color images, black and white images, or sepia tone to give an old-fashioned look. 1. Turn the camcorder on and ensure it is in Camcorder mode. 2. Press the Menu button or tap to enter the Camcorder menu 3.
4.1.5. Stabiliz er Use this function to reduce vibration caused by camcorder shakes during a video shoot. 1. Turn the camcorder on and ensure it is in Camcorder mode. 2. Press the Menu button or tap to enter the Camcorder menu 3. Move the joystic k left and ri ght or tap t he screen to highlight the Stabilizer menu.
4.1.6. Dual Video mode Use this function to record two deferent resolution video clips at same time. 1. Turn the camcorder on and ensure it is in Camcorder mode. 2. Press the Menu button or tap to enter the Camcorder menu 3. Move the joystic k left and ri ght or tap t he screen to highlight the Dual Video menu.
41 z Note : When this dual video function is enabled, the still image resolution for 720 m ode is 1280x720 and 1080 mode is 1920x1080. 4.2 Camcorder playback menu Use the playback menu to manage the files stored on the SD card. 4.2.1 Delete Use this function to delete files.
If you select Delete All , a prompt appears on screen for confirmation . Move the joystick left a nd right or tap the scre en to select the desired option. Press the center joystick button to confirm. All files stored in memory will be deleted. 3. Press the Menu button or ta p to exit the menu.
4.2.2 Protect Use this function to lock files to prevent accidental deletion. 1. Turn the camcorder on and ensure it is in Camcorder mode. Press the Playback button and th en press the Menu button or tap to displa y Camcorder Playback menu . 2. Move the joystick left and right or tap the screen to select Protect menu.
4.2.3 Auto play This camcorder includes an Autoplay fu nction, which plays each video clip in turn. 1. Turn the camcorder on and ensure it is in Camcorder mode. Press the Playback button and th en press the Menu button or tap to displa y Camcorder Playback menu .
4.3 Camera menu In Camera mode, press the Menu button to sho w the Camera Options menu. 4.3.1 Resolution Use this option to set the size of the captured image. Larger images contain more detail and therefore use more memory space. 1. Turn the camcorder on and ensure it is in Camera mode .
4.3.2 Photo Quality There are two different levels of video quality setting. Higher quality video needs mor e memory storage spa ce. 1. Turn the camcorder on and ensure it is in Camera mode . 2. Press the Menu button or tap to enter the Camera menu. 3.
3. Move the joystic k left and ri ght or tap t he screen to highlight the White Balance option. Press the center joystick button to display the submenu. 4. Move the joystick left and right to select Auto , Sunny , Cloudy , Tungsten , or Fluore scent .
5. Press the Enter button to exit th e menu. 4.3.5 Se lf-timer Use the self timer function to take a photo of yourself. 1. Turn the camcorder on and ensure it is in Camera mode . 2. Press the Menu button or tap to enter the Camera menu. 3. Move the joystic k left and ri ght or tap t he screen to highlight the Self-timer menu.
4.3.6 Aspect Ratio Use the aspec t ratio fu nction to a djust the a spect rati o of the display. 1. Turn the camcorder on and ensure it is in Camera mode . 2. Press the Menu button or tap to enter the Camera menu. 3. Move the joystic k left and ri ght or tap t he screen to highlight the Aspect Ratio menu.
4. Move the joystick left and right or tap to select on or off . Press the center joystick button to confirm. 5. Press the Enter button to exit the menu.
4.4 Camera playback menu 4.4.1 Delete Use this function to delete files. 1. Turn the camcorder on and ensure it is in Camera mode. Press the Playback button and then press the Menu button or tap to display the Camera Playback menu. 2. Move the joystick left and right or tap the screen to select Delete One or De lete All options.
If you select Delete All , a prompt appears on screen for confirmation . Move the joystick left a nd right or tap the scre en to select the desired option. Press the center joystick button to confirm. All files stored in memory will be deleted. 3. Press the Menu button or ta p to exit the menu.
4.4.2 Protect Use this function to lock files to prevent accidental deletion. 1. Turn the camcorder on and ensure it is in Camera mode. Press the Playback button and then press the Menu button or tap to display Camera Playback me nu. 2. Move the joystick left and right or tap the screen to select Protect menu.
4.4.3 Auto play The camcorder includes a slide show function, which displays each image in turn with a regular interval between pic tures. 1. Turn the camcorder on and ensure it is in Camera mode. Press the Playback button and then press the Menu button or tap to display Camera Playback me nu.
4.5 System menu The system menu is used to configure miscellaneous ca mcorder functions. 4.5.1 Setting the beep See section 2.6.3 “Setting the Beep” . 4.5.2 A uto po wer off Use this fu nction to sw itch the ca mcorder off automati cally after a period of inactivity for power saving.
4.5.3 TV sta ndard Use the TV option to set the TV system for the area. 1. Turn on the camcorder and switch to SET mode . 2. Move the joysti ck left and r ight or tap to highlig ht the TV standard option. Press the center joystick butt on to display the submenu.
4.5.4 Format Use this function to format the current storage m e dia. This format action will delete everything on the media. 1. Turn on the camcorder and switch to SET mode . 2. Move the joysti ck left and r ight or tap to highlig ht the Format option.
4.5.5 De fault Use this option to reset all settings to the default settings. 1. Turn on the camcorder and switch to SET mode . 2. Move the joystic k left and r ight highl ight the Default option. Press the center joystick button to display the submenu.
4.5.7 Frequency Use the Frequency option to set the frequency system for your area. To set the frequency: 1. Turn on the camcorder and switch to SET mode . 2. Move the joystic k left and r ight to highlight t he Frequency option. Press the cen ter joystick button to display the submenu.
60 Appendix Specifications General Imaging sensor 1/2.3” CMOS 10.0 Megapixel sensor Active pixels 10.0 Megapixel Storage media Internal: Built-in 128MB Flash Memory External: SD Card (Up t o SDHC 16GB Class6) Sensor sensitivity Auto Color effects Natural/B&W/Sepia Lens 12X Optical zoom lens Wide: F1.
61 General Still image Formats: JPEG (EXIF2.2), DCF Resolution: 2M, 5M, 10M, 12 M, 20M (Firmware interpolation) Continuous Shots: 10M, Max. 7 photos/sec; 2M, Max.
62 General EV compensation -2.0 EV~+2.0 EV Self-timer Off, 5, 10 secon d s PC interface MSDC: USB 2 .0 (high speed) TV out format NTSC/PAL/ HDMI Shutter Still: 1/2-1/2000 Video: 1/30-1/4000 Auto power off Off, 5 min., 10 min Power supply Li-Ion batter y NP-120 batter y /DC-in via USB Dimension 67 (W) x 71.
63 Troubleshooting Problem Possible Cause Solution Cannot turn on the camcorder. The batteries are not inserted correctly. The batteries have no power. • Insert the batteries correctly. (See 2.2 Insertin g the batteries .) ry .) • Please charge the battery.
64 Problem Possible Cause Solution The camcorder turns off when capturing image using self-timer. The camcorder is running out of battery power. • Please charge the battery. (see 2.3 Chargin g the battery ) The image is out of focus. The subject is beyond focus range.
Problem Possible Cause Solution Memory card cannot be used. The memory card is protected. The memory card contains non-DCF images taken by other camcorders. The SD card speed is too lo w. • Unlock the memory card. • Format the memory card. (See 4.
6 6.
.
W ebsite: Please visit our website at www .dxgusa.com for any product updates or special announcements. Y ou can also check out our online support desk where you can register your product, send emails to our technical support, and find a list of frequently asked questions (F AQs).
デバイスDXG Technology DXG-A85V HDの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
DXG Technology DXG-A85V HDをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはDXG Technology DXG-A85V HDの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。DXG Technology DXG-A85V HDの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。DXG Technology DXG-A85V HDで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
DXG Technology DXG-A85V HDを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はDXG Technology DXG-A85V HDの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、DXG Technology DXG-A85V HDに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちDXG Technology DXG-A85V HDデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
