DysonメーカーCRO2の使用説明書/サービス説明書
ページ先へ移動 of 24
This user guide also contains tips on effective washing and important safety notes. Please read this user guide carefully before use. User guide www .dyson.
8887_CRO2_OPS_COVERS.qxd 5/11/03 3:24 pm Page 4.
Contents Overview of your Dyson washing machine The only 2-drum wash action F ree registration Important safety notes Inner transit packaging removal Moving the washing machine Specification L ocation.
Overview of your Dyson washing machine 1 01 Overview Outer door Control panel Soap tray Hot water inlet Cold water inlet Drainage hose hook P ower cable & plug & Inner door Rating plate Adjust.
The only 2-drum wash action. Contrarotator TM Conventional washing machines may seem convenient, but their poor performance lets you down. So James Dyson asked his engineers to experiment with every imaginable way of washing to design a better washing machine.
Always: • ensure that the feet are screwed into cabinet before using the Rollerjack TM to move the machine. Care should be taken when moving it, as it is very heavy . • turn off the machine with the ‘Mains on/off ’ button and switch off at the socket when not in use.
7 Using the Dyson spanner remove the four bolts securing the top transit bracket. 8 Remove the four screws securing the bracket to the machine casing and lift out the transit bracket. • Refit the lid and two screws. To replace the packaging eg: for moving house , reverse the procedure described above.
600 mm MAX. 450 mm MIN. 848 mm 595mm Dimensions Height 848mm Depth 575mm Width 595mm W eight: 103kg. V oltage: 220-240V , 50Hz. Please refer to rating plate (see section 01 for location). P ower: 2750W 230V . Please refer to rating plate (see section 01 for location).
W ater supply Drainage Installation • Connect your machine to the water supply by hand, using the hoses supplied. Only tighten by hand, do not use a spanner . Do not use old hoses. • Ensure the water pressure is between 0.4 and 5 bar . Do not: • connect the machine to a mixer tap.
When all the instructions on the previous pages have been completed, the machine can be installed into its operating position using the Rollerjack TM handle (see section 01). • Using the Dyson spanner , adjust the two front feet so that the machine is perfectly stable and is touching the ground on all four corners and cannot rock.
Operation 6 01 • Ensure the machine is plugged into the mains and switched on at the socket. Check that the water supply is on at the mains. • Open the outer and inner doors. • Check the drums are empty before placing the sorted laundry into the washing machine.
1 2 Switch on the machine Select the programme Select Cotton/Synthetics/W ool/ Delicate/Handwash items or Duvet cycle. T emperature, spin and soil type settings will automatically adjust to the default settings to give the best options for the selected wash.
End of wash cycle The display will show ‘Programme finished’ once the cycle is complete. Remove the washing and turn off the machine by pressing the ‘Mains on/off ’ button.
8 01 Optional settings To personalise the default wash programmes Adjust your programme After selecting the fabric type, press the temperature, spin and soil type buttons to scroll through the options and select your preferred settings. Note: on certain programmes some options are not available (see section 02) .
Start delay Selected models only This allows you to programme the wash to finish when you want it to. Use the and arrows to adjust the settings eg: if you want the wash to start in 10 hours time, press the arrow 10 times and press ‘Start’ to activate it.
F abric care and advice 9 01 W ash tips Do not: • wash frayed or torn fabrics. •w ash items unsuitable for washing machines e.g. trainers, shoes or rucksacks. Always: Care label • check the wash care label on laundry to select the most appropriate programme.
9 02 P rogramme table Care label Suggested program me T emperature Spin speed Soil type Options Maximum load Cotton 100% cottons Linen Synthetics Cotton mixes Mixed fibre P olycottons F abrics with sp.
Self clean cycle (on selected models only) Cleaning Maintenance • The soap tray cavity in the machine should be cleaned out with a small, soft brush, taking care not to dislodge the rubber seal. • Replace the soap tray ensuring it ‘clicks’ into place.
Coin trap Maintenance 5 Remove any objects from the coin trap. 6 If any more items seem to be blocking the coin trap, pull out the flow accelerator cap. • Remove any items and firmly push the flow accelerator cap back into place. To replace the coin trap window: • Ensuring the seal is in place, lubricate with a drop of washing up liquid.
Machi “Not emptying: check ho Emergency door release W ater filter Maintenance This should be used in the event of a power cut to remove laundry . • Switch off and remove the plug from the socket. • Ensure the drums have stopped moving. • If the machine has been running on a hot wash, leave it to cool down.
11 01 T roubleshooting LCD display is blank Machine displays “ Overload reduced performance” Machine displays “Close inner door then press start” Certain spin speeds, temperatures, dirt levels.
Ensure the machine is plugged in and switched on. Check the fuse and also that the circuit breaker has not tripped. (See section 02) for the programme options wash table. Wa it for the machine to finish the cycle before opening the door . T o cancel the wash hold down the ‘Cancel’ button.
11 03 T roubleshooting Child lock on Overload reduced performance Uneven load could not spin Close outer door then press start Close inner door then press start Not emptying: check hose and coin trap Not filling: check water supply Fault The child lock has not been deactivated.
For Dyson, call Dyson Made & T ested by Dyson Dyson Call Centre Helpline 8 till 8, every day UK 08705 275104 ROI ( 01 ) 475 7109 service@ dyson .co.uk www . dyson .com Dyson Ltd T etbury Hill Malmesbury Wiltshire SN16 ORP JN.8887 30.10.03 PN .50351-04-01 GENUINE COMPONENTS 8887_CRO2_OPS_COVERS.
デバイスDyson CRO2の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Dyson CRO2をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはDyson CRO2の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Dyson CRO2の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Dyson CRO2で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Dyson CRO2を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はDyson CRO2の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Dyson CRO2に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちDyson CRO2デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。