Eclipse - Fujitsu TenメーカーAVN2454の使用説明書/サービス説明書
ページ先へ移動 of 16
Be sure to read this installation manual thoroughly before carrying out installation and making connections. If installation methods or non-standard parts that are not specified in this installation manual are used, accidents or injury may result. Professional installation is recommended, contact the place of purchase to schedule an appointment.
Components Components Check that all of the following components are present Check that all of the following components are present - 2 - GPS antenna components MAP DVD-ROM x 1 10 GPS antenna x 1 11 W.
- 3 - Warnings and caution signs, illustrated bellow, are posted throughout this manual as well as on the AVN2454. They show safe and correct ways to handle the product so as to prevent personal injury to you and others and avoid damage to property.
- 4 - • When routing cables, use care so that they do not contact sharp metal parts such as brackets or screw tips. Otherwise, a short circuit, electric shock, fire or accident may result. • Play the audio at a moderate volume level that permits you to hear sounds from outside the car.
- 5 - Installation Diag Installation Diag r r am am GPS antenna (When installing inside the vehicle) 11 GPS antenna (When installing outside the vehicle) 11 • If installing the GPS antenna inside the vehicle, the location and the slope of the vehicle's windshield will determine the accuracy of the GPS antenna to receive the GPS signal.
Names and functions of ter Names and functions of ter minals minals - 6 - • Never cut the insulation on the power cable or use it to power any other equipment. If the rated current capacity of the power cable is exceeded, fire and electric shocks may result.
- 7 - B+ (Yellow) Connect where power is constantly available, regardless of the ignition key's position. ACC (Red) Connect where the power comes on when the ignition is in the ACC position. Illumination power supply (Orange/White) Connect to where power comes on when the vehicle light switch is turned on.
E-LAN terminal (13P) Connect to the E-LAN terminal of the CD changer, etc. Genuine steering remote control terminal Connect to the vehicle steering remote control. ※ Compatible vehicle models for installation : Vehicles with voltage detection-type steering remote control.
Notes on installation - 9 - • Check the vehicle speed pulse signal, parking brake signal and reverse signal carefully before making the connections. If the cables are incorrectly connected, accidents or problems with correct operation may result.
- 10 - Foot-operated Parking brake Parking brake Signal Cable Hand-operated Parking brake - An example for connecting the parking brake signal - Use the splicing connector to connect the parking brake signal connector (red/white) of the interconnecting cable to the parking brake signal cable.
- 11 - - Using the splicing connector - Insert the connection cable [vehicle speed pulse signal cable (purple/white), parking brake cable (red/white) or reverse cable (green)] and the vehicle cable into the splicing connector. 4 1 Push in the terminal (the metal part) of the splicing connector using a pair of pliers.
- 12 - System connection e System connection e xample xample • Never cut the insulation on the power cable or use it to power any other equipment. If the rated current capacity of the power cable is exceeded, fire and electric shocks may result.
Tip - 13 - Installing the GPS antenna Installing the GPS antenna Notes on installation • The GPS antenna should be installed in a level position where the signals will be as unobscured as much as possible, such as on the vehicle's roof. Satellite signals cannot be received if the antenna is obscured.
- 14 - - Installation inside the vehicle (example) - Choose an installation location on the dashboard which is flat and has a clear view of the sky. 1 Install the ground plate to the dashboard. 2 Install the GPS antenna to the ground plate. 3 Ground plate 13 Secure the GPS antenna cable with clamps.
- 15 - - Installation outside the vehicle (example) - Choose an installation location where the GPS antenna can be attached securely. 1 Remove the backing paper from the body protective sheet and attach the sheet to the vehicle. 2 Install the GPS antenna on top of the body protective sheet.
- 16 - Installing the main unit Installing the main unit Remove the pocket and any other accessories from the center cluster to make room for the main unit.
デバイスEclipse - Fujitsu Ten AVN2454の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Eclipse - Fujitsu Ten AVN2454をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはEclipse - Fujitsu Ten AVN2454の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Eclipse - Fujitsu Ten AVN2454の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Eclipse - Fujitsu Ten AVN2454で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Eclipse - Fujitsu Ten AVN2454を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はEclipse - Fujitsu Ten AVN2454の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Eclipse - Fujitsu Ten AVN2454に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちEclipse - Fujitsu Ten AVN2454デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
