Eclipse - Fujitsu TenメーカーAVN4429の使用説明書/サービス説明書
ページ先へ移動 of 15
Connecting the vehicle speed pulse, parking brake, and reverse cables (wires) Deutsch Español Français Italiano Nederlands Svenska English Be sure to read this installation manual thoroughly prior to installation. If installation methods or nonstandard parts not specified in this installation manual are used, accidents or injury may result.
- 2 - Deutsch English Español Français Italiano Nederlands Svenska When installing the main unit, some vehicle models may require the use of items that need to be obtained separately such as a power supply adaptor cable, radio antenna adaptor cable or mounting bracket.
- 3 - Deutsch Español Français Italiano Nederlands Svenska English Warnings and caution signs, illustrated bellow, are posted throughout this manual as well as on the AVN4429. They show safe and correct ways to handle the main unit so as to prevent personal injury to you and others and avoid damage to property.
- 4 - Deutsch English Español Français Italiano Nederlands Svenska • Once installation and wiring have been completed, return the brakes and electrical equipment such as lights, horn, hazard warning lights and turn signal lights to their original places, and check that they operate correctly.
Deutsch Español Français Italiano Nederlands Svenska English - 5 - • Never cut the insulation on the power cable or use it to power any other equipment. If the rated current capacity of the power cable is exceeded, fire and electric shocks may result.
- 6 - Deutsch English Español Français Italiano Nederlands Svenska Antenna power supply (Blue) Connect to the automatic-antenna control terminal of the vehicle. Control power supply (Blue/White) Connect the control terminal for the external amplifier, etc.
- 7 - Deutsch Español Français Italiano Nederlands Svenska English - V ehicle connections - • You will need to purchase the necessary component adapter cable for the vehicle so that the power supplies can be utilised. (Contact the dealer for further details.
- 8 - Deutsch English Español Français Italiano Nederlands Svenska Notes on installation The locations where the vehicle speed pulse signal cable may vary depending on the vehicle model and grade. Ask the car dealer or your nearest ECLIPSE dealer for details.
- 9 - Deutsch Español Français Italiano Nederlands Svenska English - Using the splicing connector - Insert the connection cable [vehicle speed pulse signal cable (purple/white), parking brake cable (red/white), or reverse cable (green)] from the main unit and the vehicle cable into the splicing connector.
- 10 - Deutsch English Español Français Italiano Nederlands Svenska • Never cut the insulation on the power cable or use it to power any other main unit. If the rated current capacity of the power cable is exceeded, fire and electric shocks may result.
- 11 - Deutsch Español Français Italiano Nederlands Svenska English Tip Notes on installation • Do not install the antenna in places (such as front pillars and roof panel) that are shielded from the sky.
- 12 - Deutsch English Español Français Italiano Nederlands Svenska Choose an installation location on the dashboard which is flat and has a clear view of the sky. 1 Install the earth plate to the dashboard. 2 Install the GPS antenna to the earth plate.
- 13 - Deutsch Español Français Italiano Nederlands Svenska English • Carefully bind any excess length of cable that is connected to the main unit and secure it to an area of empty space in the vehicle so that it does not move around or get caught in the main unit or vehicle-side equipment.
- 14 - Deutsch English Español Français Italiano Nederlands Svenska • If using hexagonal head bolts (Red: M5x8), use the four hexagonal head bolts (Red: M5x8) which were used to install the carrying bracket and the four accessory hexagonal head bolts (Red: M5x8).
- 15 - Deutsch Español Français Italiano Nederlands Svenska English Chec Chec king oper king oper ation after installation ation after installation Install the PND to the main unit. 1 Insert the ignition key into the vehicle and start the engine. 2 Check the connection status for each signal in a place where they are easy to see.
デバイスEclipse - Fujitsu Ten AVN4429の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Eclipse - Fujitsu Ten AVN4429をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはEclipse - Fujitsu Ten AVN4429の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Eclipse - Fujitsu Ten AVN4429の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Eclipse - Fujitsu Ten AVN4429で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Eclipse - Fujitsu Ten AVN4429を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はEclipse - Fujitsu Ten AVN4429の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Eclipse - Fujitsu Ten AVN4429に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちEclipse - Fujitsu Ten AVN4429デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。