Eclipse - Fujitsu TenメーカーCD3421の使用説明書/サービス説明書
ページ先へ移動 of 72
OWNER'S MANUAL We appreciate your purchase of this receiver. Please read through this manual for correct operation. We suggest that after reading it you keep this manual in a safe place for future reference.
2 For your safety in using the CD3421 Warnings and caution signs, illustrated below, are posted throughout this manual as well as on the CD3421. They show safe and correct ways to handle the product so as to prevent personal injury to you and others and avoid damage to property.
3 • Do not place the vinyl storage bag over a person. It may cause a serious accident or death by suffocation. • Do not adjust the controls while driving the car. To adjust the controls, stop the car in a safe location. • To prevent accidents, store batteries for the remote control out of the reach of small children.
4 • To prevent a short circuit from occurring, disconnect the battery's negative terminal before installing this product. Otherwise, an electric shock or injury may result. • When using an existing nut and/or bolt from the vehicle to ground this product, do not use any that secure parts of the steering or braking systems.
5 • Play the audio at a moderate volume level that permits you to hear sounds from outside the car. Driving without being able to hear outside sounds may result in an accident. • Keep foreign objects out of the disc slot. They may cause fire or electrical shock.
6 • Avoid installing this product in places where it may get wet, such as near windows, or in places that are moist or dusty. Presence of liquid, moisture or dust inside this product can cause short circuiting, resulting in smoke or fire.
7 T able of Contents Operating Precautions .............................................. 10 Notes on Operation ...................................................................... 10 About compact discs .............................................
8 Entering stations into memory automatically (The automatic preset mode: ASM) ............................................. 33 Manually setting stations into memory ......................................... 34 Preset station scan ....................
9 Mounting Instruction ...................................................62 Mounting the main unit ................................................................. 62 Names of lead wires and destinations ......................................... 64 System .
Operating precautions 10 Notes on Operation ◆ Operating Precautions <Your CD3421 will perform well over a long period of time through correct handling and care.> • For your safety, play only at volume levels that allow outside sounds to be heard.
11 Operating precautions • About dew condensation In cold or rainy weather, just as the interior glass surface gets fogged, dew (water condensation) may also settle on the deck. When this occurs, disc playback may become intermittent or impossible. Dehumidify the air in the vehick for a while before resuming playback.
Operating precautions 12 • The signal recorded on a compact disc is read by a laser beam, so nothing touches the disc surface. A scratch on the recorded surface or a badly warped disc may cause deteriorated sound quality or intermittent playback.
13 Operating precautions About CD accessories • Do not use accessories (stabilizers, protective seals, laser lens cleaners, etc.) sold for “ improving sound performance ” or “ protecting CDs. ” The changes in CD thickness or outside dimensions made by these accessories may cause problems in the player.
Operating precautions 14 • Use a commercially available compact disc cleaner to clean a CD, wiping lightly from the center to the edge. • Do not use benzine, thinner, LP record spray or other cleaners on CDs.
15 Names of controls and parts ◆ Names of controls and parts Fr ont View ※ NOTE : Double function button → "E-COM" & "MUTE" functions • Though the words "press&quo.
ESN (Key CD) security operating procedure 16 [ FUNC ] button Button [1] ◆ ESN (Key CD) security operating procedure ■ How to pr ogram the Key CD 1 . Turn off the main unit power. 2 . Press and hold button [1], then the [FUNC] button, and hold both for more than one second.
17 ESN (Key CD) security operating procedure [ FUNC ] button Button [1] • If there is a problem with the inserted CD, an [ERR] message will appear for two seconds and the CD will be ejected. Reinsert the ejected CD. • If a CD causes the [ERR] message to appear twice in a row, a [CHANGE] message will appear for two seconds.
ESN (Key CD) security operating procedure 18 • This process cancels the protection for the ESN deck. • If power to the CD3421 is disconnected, then reconnected, a key CD will not need to be inserted in order to return the unit to normal operation.
19 ESN (Key CD) security operating procedure ■ How to r esume normal operation (ESN security lock out) If power to the CD3421 is disconnected while ESN security is active (a Key CD was programmed), operation is disabled until power is restored and the unit unlocked.
ESN (Key CD) security operating procedure 20 [ FUNC ] button Button [6] ■ What happens if an incorr ect CD is inserted? 1 . An [ERR_] message will be appear, then change to a flashing [DISC], then the CD will be ejected. You will have five uninterrupted attempts to insert the correct CD.
21 ESN (Key CD) security operating procedure [ FUNC ] button Button [2] Button [4] ■ How to turn the Security indicator on/off Once ESN security is activated, the indicator flashes whenever the vehicle ’ s ignition is turned off, warning potential thieves that the unit is protected.
Basic operation 22 [SOURCE] button Buttons [1] to[6] [ BND ] button [ TU ] button ◆ Basic operation This section covers basic operating procedures.For additional details, please refer to the sections on specific functions. ■ T ur ning the power on and of f 1 .
23 Basic operation ■ Listening to the tuner 1 . Press the [SOURCE] button repeatedly to switch to the tuner mode. This will turn the tuner on. To turn the tuner off, press the [SOURCE] button either shorter to select another mode or longer to turn the power off.
Basic operation 24 [E-COM] button [AUDIO CONTROL] button [ FUNC ] button [SOURCE] button [ BND ] button ■ Adjusting audio volume 1 . Turn the [AUDIO CONTROL] button to the left or right. Turn to the left : Decreases the volume. Turn to the right : Increases the volume.
25 Basic operation 3 . Press the [SOURCE] button to switch to the [CLOCK ON] display. 4 . Press the [FUNC] button again. Refer to the section on “ setting the clock ” to set the time display.
Basic operation 26 [CUSTOM] button [AUDIO CONTROL] button [ FUNC ] button [SOURCE] button [ BND ] button [MODE] button ▼ ▼ Setting the clock This receiver uses the 12-hour, A.M./P.M.display notation. 1 . Press the [FUNC] button for more than one second.
27 Basic operation ▼ ▼ Switching audio control modes Various audio control modes may be fine-tuned using this procedure. 1 . Press the [AUDIO CONTROL] button for less than one second.
Basic operation 28 [E-COM] button [ FUNC ] button [SOURCE] button [ BND ] button ▼ ▼ Switching Non-Fader modes 1 . Press the [FUNC] button for more than one second. 2 . Press the [ BND ] button repeatedly until the [PHASE NORM] display appears on the screen.
29 How to operate the CD player [SOURCE] button [ BND ] button ◆ How to operate the CD player First press the [SOURCE] button to switch to the disc mode. It is assumed here that a CD has already been loaded into the unit. ■ Listening to CDs 1 . Press the [SOURCE] button.
How to operate the CD player 30 Button [4] [ TU ] button ■ Advancing to the next track or r etur ning to the beginning of the track being played 1 . Press the [ TU ] button. [ ] button: Advances to the next track. [ ] button: Returns to the beginning of the track being played.
31 How to operate the CD player [ (EJECT)] button Buttons [5] to[6] ■ Repeating the same track (REPEA T) 1 . Press button [5 (RPT)] to repeat the track being played. To cancel, press button [5] again. ■ Playing tracks in random order (RANDOM) 1 .
How to operate the tuner 32 [SOURCE] button [ BND ] button [ TU ] button ◆ How to operate the tuner First, press the [SOURCE] button to start tuner operation. There are automatic and manual methods for setting stations in memory. The receiver will accept up to 24 stations in memory: six in AM and 18 in FM (6 each for FM1, FM2 and FM3.
33 How to operate the tuner [ BND ] button [MODE] button Buttons [1] to[6] • At times, it may be difficult to maintain optimum reception because the antenna affixed to your vehicle is in motion constantly (relative to the broadcast antenna), encountering continuous variation in the received radio signals ’ strength.
How to operate the tuner 34 Buttons [1] to[6] [ BND ] button [ TU ] button • Press any numbered button to select the station whose frequency is indicated right above the button. • When a new station is set in memory, the station previously set in memory will be deleted.
35 How to operate the tuner [MODE] button ■ Pr eset station scan This function enables reception of all the stations in the numbered preset buttons for five seconds each. 1 . Press the [MODE] button. [P SCAN] will appear at the top of the display, and stations stored under preset buttons [1] through [6] will be played for five seconds each.
How to operate the tuner 36 ■ FM r eception characteristics In general, FM has much better tonal quality than AM. However, FM and FM stereo reception encounter several characteristic problems not encountered with AM. FM is more difficult to receive than AM in a moving vehicle.
37 How to operate the tuner 3 . RECEPTION AREA OF FM BROADCASTS A home receiver can catch weak FM stereo signals through the use of a tall, directional or ultra-sensitive antenna.
How to operate the tuner 38 4 . MULTIPATH The reflection characteristics of FM waves cause another problem called multipath – FM wave signals reflecting off of buildings, mountains, etc.
39 How to use an Optional Card remote control ◆ How to use an optional Card remote control • Be careful when handling the control, especially because it is small and light. Dropping or striking it hard may damage it, wear out the battery or cause a malfunction.
How to use an Optional Card remote control 40 ■ T ur ning the power on/of f 1 . Press the [PWR] button. The power turns on or off each time the button is pressed. • When the main unit is shut down, the remote control will not work. ■ Adjusting the audio volume 1 .
41 How to use an Optional Card remote control ■ How to play the tuner Enter the tuner mode first. ▼ ▼ Select the FM/AM band 1. Tap the [BAND] button. Each tap will switch tuner modes from FM1 → FM2 → FM3 → AM. ▼ ▼ Select a station (manually or automatically) A short tap of the button will allow manual station tuning.
How to use an Optional Card remote control 42 ■ How to play CDs Select the disc mode first. ▼ ▼ Switching disc modes 1. Press the [BAND] button. When one or two CD changer is connected, tap the [BAND] button to change modes from CD player → CD changer 1 → CD changer 2.
43 How to use an Optional Card remote control ■ Switching the r emote contr ol settings Remote control functions can be switched to the three patterns.
How to use an Optional Card remote control 44 ■ Replacing the battery Use one CR2025 battery. 1 . On the back of the remote control, while pressing the locking knob on the battery slot cover toward your right, pull out the battery carier with your fingernail.
45 How to use an optional NOB remote control ◆ How to use an optional NOB remote control ■ T ur ning the power on/of f 1 . Press the [PWR] button. The power turns on or off each time the button is pressed. • When the main unit is shut down, the remote control will not work.
How to use an optional NOB remote control 46 ■ Switching playback modes 1 . Press the [MODE] button. Tap the button to switch modes in the following sequence: ■ How to play the tuner Enter the tuner mode first. ▼ ▼ Select the FM/AM band 1. Tap the [BAND] button.
47 How to use an optional NOB remote control ▼ ▼ Selecting preset stations A total of six stations may be selected (preset tuning) out of those already set in memory through the main unit. (Refer to “ Manually setting stations into memory, ” page 34.
How to use an optional NOB remote control 48 • Hold the [ ] button down to fast-forward, or the [ ] button to fast-reverse the track being played. ▼ ▼ Skipping to the next disc or back to the beginning of track being played. 1. Press the[ DISC ] button.
49 How to use an optional NOB remote control ■ Switching the r emote contr ol settings Remote control functions can be switched to the three patterns.
How to use an optional NOB remote control 50 ■ Replacing the battery Use two AA cell batteries. 1 . Remove the back cover of the remote control unit by gently pressing and sliding it in the direction indicated by the arrow. 2 . Install the two batterles provided into the compartment as illustrated inside the compartment.
51 How to use an optional NOB remote control ● Caution ● ・ Be extremely careful not to swallow the battery. ・ The battery life is approximately one year. If the remote control unit does not operate correctly or if the button lump gets dim, replace the batteries.
How to operate the receiver with an optional CD changer connected 52 [SOURCE] button [ BND ] button [ TU ] button ◆ How to operate the receiver with an optional CD changer connected ■ Basic operation This section covers the operation of the CD changer that is connected to the receiver.
53 How to operate the receiver with an optional CD changer connected Buttons [4] to[6] ▼ ▼ Playing the beginning of tracks (SCAN): 1. Press button [4 (SCAN)].
How to operate the receiver with an optional CD changer connected 54 Buttons [1] to[6] [MODE] button • Occasionally the same track happens to be played (selected) two or more times in a row, but it is no sign of a problem.
55 If you have a question: ◆ If you have a question: First check the items mentioned below before attempting to troubleshoot problems. ● Caution ● • If a problem occurs, for instance when the unit does not respond to any button presses, or the display doesn 'ｔ work correctly, press the [RESET] button using a sharp tool.
If you have a question: 56 ■ Displaying information (for tr oubleshooting) The information listed in the chart below is displayed to show the status of the CD player and CD changer. Refer to the chart for the appropriate action. Infomation Code Table When “ INFO ” flash on the indicator .
57 If you have a question:.
If you have a question: 58.
59 Specifications ◆ Specifications < GENERAL > Power Supply 14.4V DC (11-16V) Current Drain 3A (1W × 4) Dimensions (W x H x D) In-Dash Unit 7 ″× 2 ″× 6-1/8 ″ (178 × 50 × 155mm) < FM TUNER > Frequency Range 87.
Specifications 60 < CD SECTION > Frequency Response 20~20,000Hz, ± 3dB Wow & Flutter Below measurable limits Stereo Separation 73dB S/N Ratio (A-weighted) 96dB Dynamic Range 95dB Total Harmonic Distortion 0.03% < AUDIO AMPLIFIER > Power Output 13W × 4 (20~20,000Hz,0.
61 Before Installation ◆ Before Installation Notes Be sure to disconnect the battery negative terminal before installing the receiver. ■ Components No.
Mounting instruction 62 ◆ Mounting instruction ■ Mounting the main unit 1 . Insert the mounting sleeve into the opening in the vehicle console. 2 . Use a screwdriver or the like to bend the tabs in the mounting sleeve to secure the mounting sleeve.
63 Mounting instruction 4 . Mount the stud bolt to the main unit. 5 . Insert the main unit into the mounting sleeve until it locks in place. 6 . F asten the rear of the main unit using either method [A] or [B]. Select method [A] or [B] to suit the interior configuration of the vehicle.
Mounting instruction 64 Notes To prevent unconnected leads from shorting out, insulate them by wrapping their tips with electrical tape. Similarly, insulate the ends of connected leads. If an external amplifier is to be connected to the receiver, be sure to ground its outside housing to the vehicle body (a metal part).
65 Mounting instruction ■ System.
Mounting instruction 66.
67 Mounting instruction.
Mounting instruction 68 14.
69 MEMO.
MEMO 70.
71 Mounting instruction IMPOR T ANT RECORD YOUR “KEY CD” HERE… STORE YOUR “KEY CD” ALONG WITH YOUR OWNER’S MANUAL IN YOUR SOCK DRA WER..
by FUJITSU TEN R DIVISION OF FUJITSU TEN CORP. OF AMERICA 19600 SOUTH VERMONT AVENUE, TORRANCE, CA 90502 (310) 327-2151 090001-13970700 0011DE(N.O.) CUSTOMER NOTICE Please retain this booklet and write in the serial number of your CD3421 for identification.
デバイスEclipse - Fujitsu Ten CD3421の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Eclipse - Fujitsu Ten CD3421をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはEclipse - Fujitsu Ten CD3421の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Eclipse - Fujitsu Ten CD3421の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Eclipse - Fujitsu Ten CD3421で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Eclipse - Fujitsu Ten CD3421を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はEclipse - Fujitsu Ten CD3421の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Eclipse - Fujitsu Ten CD3421に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちEclipse - Fujitsu Ten CD3421デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
