EdimaxメーカーEW-7438RPn Miniの使用説明書/サービス説明書
ページ先へ移動 of 141
EW -7438RPn Mini User Manual 07-2014 / v1.0.
CONTENTS I. Product Information .............................................................................. 1 I- 1. Package Contents .......................................................................................................... 1 I- 2. System Requirements .
VI - 1. Home ............................................................................................................................ 52 VI - 2. iQ Setup .............................................................................................
VIII-1-4- 2. Windows 8 ................................................................................................................. 118 VIII-1-4- 3. Mac .............................................................................................
1 I. Product Information I- 1. Pac kage Contents - EW -7438RPn Mini - CD with multi-language QIG & u ser manual - Q uick installation g uide (QIG) - Acc ess key card I-2. System Requirem ents - Wi -Fi extender/Wi-Fi b ridge mode: Existing 2.4GHz wireless network - Acc ess point mode : Cable/DSL mode m rout er - Computer with 2.
2 Wi - Fi Green Flashing Transferring data Of f Wi -Fi not acti ve or in LED off mode Power Green On Extender is on Flashing Resetting to factor y default settings, or system is b ooting up Off Extend.
3 I-4. Hardware Ove rview 1 . LEDs 2. Ethernet Port 3. WPS/Reset But ton 3 1 2.
4 I-5. Safety Informatio n In order to ensure the saf e operation of the device and it s users, please read and act in accordance with the fol lo wing safety instruc tions. 1. The device is desi gned for indoor use only; do n ot place it outdoor s. 2.
5 II . Installation The EW -7438RPn Mini has th ree different operati ng modes which you can choose depending on you r network requirements . Each mode is d escribed below: Wi -Fi Extender The device connects wirelessly to your existing network and repeats the wireless signal.
6 2. Th e green powe r LED will fl ash while the system is b ooting up. The device is ready when the green power LED displays on . 3. Use a Wi-Fi device (e.g. computer, tabl et, smartphone) to search for a Wi -Fi networ k with the SSID Edimax EXT.Setup ** and conne ct to it.
7 4. O pen a web brows er and if you do no t automatically arrive at th e “Get Started” screen shown below , enter the URL htt p://edimaxext .setup and click “Get Started” to begin t he setup process. If you cannot access http://edimaxext.setup , please make sure your computer is set to use a dynamic IP address.
8 II - 1. Wi -Fi Extender Mode 1. Pl ease read the on screen in structions about selecting a good locat ion for your wireless extender and t hen click “NEXT” to c ontinue. You can check your signal strength on t he next page. 2. Select you r Wi-Fi networ k from the li st.
9 usually available in the configuration options of your router. If yo u use a hidden SSID , check the “Connect to a hidden network” box and enter the information manually.
10 4. Pl ease wait while the EW -7438RPn M ini tests the connection. If your Wi-Fi extender fails to connect (below) to yo ur existing router/access point, c lick the “ BACK ” button and ensure you entered the correct Wi -Fi network password.
11 5. When the connect ion test is complet e, click “Apply” to restart the extender. 6. Pl ease wait a moment until the extender is ready. 7. A final congratulations scr een will indicate tha t setup is complete.
12 Android: iOS: 8. Pl ease close the br owser window. Y ou can now connect to the exte nder ’s new SSID on a wir eless device within range such as a co mputer, smartphone or tabl et. The password for your Wi- Fi extender’s SSID is the same as for your router’s SSID.
13 II -2. Wi -Fi Adapter/Bri dge Mode 1. Select your Wi-Fi networ k from the li st and ent er the security key/password. If the Wi-Fi network you wish to connect to does not appear, try clicking “Refresh”. Do not check “C on nect to a hidden network” unless you wish to co nnect to a hidden SSID instead.
14 3. Please wait whil e the EW -7438RPn Mini tests t he connection. If your Wi-Fi extender fails to connect (below) to your existing router/access point, c lick the “ BACK ” button and ensure you entered the correct Wi -Fi network password.
15 4. When the connect ion test is complet e, click “Apply” to restart the extender. 5. Please wait a moment unt il the EW -7438RPn Mini is ready..
16 6. A final congratulations screen wil l indicate tha t setup is complete. Please close the browser window. 7. The EW -7438RPn Mini is working and ready for us e as a wi reless bridge . Use an Ethernet cabl e to connect t he EW -7438RPn Mini to th e Ethernet port on your netw ork device.
17 II - 3. Wi -Fi Access Point Mode 1. Connect the LAN port of y our EW -7438RPn Mini to th e LAN port of you r existing router using an Ethernet cab le, and then click “ Next”. 2. Click “Next” to cont inue. 3. Select “Obtain an IP a ddress automati cally” or “Use th e following I P address” for your EW -7438RPn Mini .
18 4. Enter a name and password for your wirele ss network, then click “Next” to continue. You can also enable an additional guest Wi-Fi network. A guest Wi -Fi network is another SSID with a different name and password. Select “Enable” and enter a guest network name and password if you wish.
19 5. A summary of your configu ration will be displayed, as shown below. Check that all of t he details are correct and t hen click “ Apply ” to restart the EW -7438RPn Mini. 6. Please wait a moment until the EW - 7438RPn Mini is ready. 7. A final congratulations screen will indi cate that setup is co mplete.
20 II -4. WPS Setup The WPS button is a qu ick and easy method to establish a secu re connection between your EW - 7438RPn Mini and wireless router/access p oint .
21 2. Within two min utes , press the WPS but ton on the EW - 7438RPn Mini for 2 – 5 seconds to activat e WPS. The g reen WPS LED wil l flash to indicat e that WPS is active. 3. The devices will es tablish a connection. Th e green WPS LED on the EW -7438RPn Mini will displ ay on for 5 minutes to indicat e a successful connection.
22 II -5. Reset to Factory D efault Settings If you experience problems wit h your extender o r if you want to change t he extender to a diffe rent operating mode, you can reset the device bac k to its factory settings. This resets all settings back to d efault.
23 III . Browser Based Configuration Interface After you have setup the EW -7438RP n Mini as detail ed in II. Installation or the included Q uick Installation G uide , you can use th e browser based configuration int erface to configure advanced sett ings.
24 3. You will arrive at the “ Stat us and I nformation ” screen . Use the menu down the left side t o navigate..
25 III-2. Save Settings 1. After you make any changes to the EW -7438RPn Mini ’s sett ings, please click “APPLY”. 2. Then, select “CONTINUE” to save c hanges but not apply them ye t, or select “APPLY” to r estart the EW - 7438RPn Mini and bring th e changes into effect.
26 III- 3. Main Menu The main menu di splays different op tions depending o n your device’s operating mode. Please refer to the f ollowing chapt ers for guida nce on each mode.
27 IV . Extender Mode IV -1. Home The “Status an d Information ” page displays basic system information about the device, arranged int o three categories: system, wireless configurat ion & LAN configurati on. Screenshots displayed are examples.
28 Current Time Current time and da te. Uptime Displays the total time since the devi ce was turned on. Hardware Version Displays the hard ware version. Firmware Version Displays the firmw are version. Mode Displays the opera ting mode. SSID Displays the EW -7438RPn Mini ’s SS ID.
29 IV -2. iQ Setup You can run th e setup wizard agai n to reconfigure the basic settings of the device. Pl ease refer to II -1. Wi-Fi Extender Mode St ep 2 onwa rds for guidance. If you wish to change the operating mode, please reset the EW-7438RPn Mini back to factory default settings.
30 IV -3 . WPS Settings Wi -Fi Protected Setup is a simple way to est ablish connections betw een WPS compatible devices. When WPS is activated in the co rrect manner and at the c orrect time for two compatible devices, they will autom atically connect.
31 IV -4. Advanced Settin g In “ Advanced S etting ” you can adjust the powe r output of the EW -7438RP n Mini . The submenu also al lows you to configure security, time settings and schedul ing settings as well as various administra tive and management funct ions.
32 IV -4-1. WLAN 2.4GHz Sec urity Broadcast SSID Enable or disable S SID broadcast. Wh en enabled, the SSID wi ll be visible to clients as an available Wi -Fi network. When di sabled, the SSID will not be visi ble as an availabl e Wi -Fi network to clients – clients mu st manually enter the SSID in order to connect.
33 Mini. Guest Network You can also enabl e an additional guest Wi-Fi network. A guest Wi -Fi network is a nother SSID with a diff erent name and pass word. Select enable or disab le. Guest Network Name Enter a name (SSID) for your guest Wi -Fi network.
34 IV -4-2. Time Settings Set Time Zone Select the time zone of you r country or region. Time Server Address The extender supp orts NTP (Network Ti me Protocol), select a ti me server from the drop down menu.
35 IV -4-3. Scheduling Setting Add Click to add a new schedule in a ne w window (see below). Edit Edit an existing schedule in a new window. Delete Delete the specified schedul e.
36 1. Select which functi on to schedule usi n g the “Service” menu an d e nte r a name for the sche dule i n t he “schedule descrip tion” box . 2. Specify a start and end time (hours and minutes) using t he drop-do wn menus for your requi red day.
37 IV -4-4. Administration U tility You can change the passwo rd used to logi n to the browser -based configuration int erface here. It is advised to do so for security purp oses . Y ou can also configure the EW -7438RPn Mini ’s IP address. Please make a note of the new password.
38 IV -4-5. Configuration Too ls The “Configurati on Tools” menu all ows you to backup the EW - 7438RPn Mi ni ’s settings, restore the setting s to a previous version or restore the EW -7438RPn Mini back to its fa ctory default state. You can a lso upgrade th e firmware, reboot the device and export the sys tem log.
39 Upgrade Firmwar e You can upgrade the syste m firmware to a mo re recent version. You can download the latest f irmware from the Edimax website . After the upg rade, the system will restart. Do not unplug or disconnect the device during a firmware upgrade, as this could damage the device.
40 Reboot In the event that the route r malfunctions or is not r esponding , then it is recommended that you restart t he device. Rebooting the EW-7438RPn Mini will not affect the current configuration/settings of the device. Apply Click “Apply” to reboot th e device.
41 System Log You can export the system log to a se parate file if you requi re. Export system log Click to open a new wind ow and sel ect a location to save th e log file.
42 V. Wi -Fi Adapter /Bridge Mode V-1. Home The “Status an d Information ” page displays basic system information about the device, arranged int o three categories: syst em, wireless confi guration & LAN configu ration. Screenshots displayed are examples.
43 Hardware Version Displays the hard ware version. Firmware Version Displays the firmw are version. Mode Displays the opera ting mode. SSID Displays your rout er/access point ’ s SSID, sometimes also kn own as SSID . The SSI D is the na me used to ident ify a wireless network.
44 V-2. iQ Setup You can run the se tup wizard agai n to reconfigure the basic settings of t he device. Please refer to II -2. Wi-Fi Adapter/Bridge M ode for guidance. If you wish to change the operating mode, please reset the EW-7438RPn Mini back to factory default settings.
45 V-3. Wireless Advanced In “Wireless Advanced” yo u adjust the power out put of the EW -7438RP n Mini . The submenu also al lows you to configure time sett ings and various administrati ve and management f unctions. Tx Power You can adjust the level of wireless out put power as a percen tage.
46 V-3-1. Time Settings Set Time Zone Select the time zone of you r country or region. Time Server Address The extender supp orts NTP (Network Ti me Protocol), select a ti me server from the drop down menu.
47 V-3-2. Administration Util ity You can change the passwo rd used to logi n to the bro wser-based configuration int erface here. It is advised to do so for security purp oses . Y ou can also configure the EW -7438RPn Mini ’s IP address. Please make a note of the new password.
48 V-3-3. Configuration Too ls The “Configurati on Tools” menu all ows you to backup the EW - 7438RPn Mi ni ’s settings, restore the setting s to a previous version or restore the EW -7438RPn Mini back to its fa ctory default state. You can a lso upgrade the fi rmware, reboot the device and export the sys tem log.
49 Upgrade Firmware You can upgrade the syste m firmware to a mo re recent version. You can download the latest f irmware from the Edimax website . After the upgrad e, the system will restart. Do not switch off or disconnect the device during a firmware upgrade, as this could damage the device.
.
51 System Log You can export the system log to a se parate file if you requi re. Export system log Click to open a new wind ow and sel ect a location to save th e log file.
52 VI . Access Point Mode VI -1. Home The “ Status an d Information ” page displays basic system information ab out the device, arranged in to three categories: s ystem, wireless conf iguration & LAN confi guration . Screenshots displayed are examples.
53 Firmware Version Displays the firmw are version. Mode Displays the opera ting mode. SSID Displays the access poi nt’s SSID, som etimes also known as SSI D. The SSID is the name used to identify a wireless netwo rk. Channel Number Displays the cu r rent wireless channe l number.
54 VI -2. iQ Setup You can run the se tup wizard agai n to reconfigure the basic settings of t he device. Please refer to II -3. Wi-Fi Access Point Mode Step 3 onwards f or guidance. If you wish to change the operating mode, please reset the EW-7438RPn Mini back to factory default settings.
55 VI -3. Basic Settings The “ Basic Sett ings ” screen displays various settings for your wireless net work. Mode The EW -7438RPn Mi ni ’s mode is dis played here. Band Displays the wireless sta ndard used for the EW -7438RPn Mini . “2.4GHz (B+G+N)” means that 802.
56 Multiple SSID This page allows you to configure the wireles s settings for multiple ESSID ’ s. No. Identification number of each additi onal SSID . Enable Check the box to e nable or disable a n SSID . SSID Enter the SSID (the name u sed to identi fy this wireless access poi nt) here.
57 or selected combina tions of each. O nly wireless clients of th e same band(s) as you select will be able to conne ct. AP Isolation When “ Enabled ” , wireless clients will be able to access the Internet, but will not be able to communicate with each other.
58 VI -4. WPS Settings Wi -Fi Protected Setup is a simple way to est ablish connections betw een WPS compatible devices. When WPS is activated in the co rrect manner and at the c orrect time for two compatible devices, th ey will autom atically connect.
59 Passphrase Key Displays the wireless secu rity authenticat ion key. Configuration Mode The configuration mode of the device’s WPS setting is displ ayed here. “Registrar” means the device acts as an access point for a wireless client to connect t o and the wireless client(s) will follow the device’s wireless s ettings.
60 VI -5. Wireless Advanced Using the “ Advanc ed Setting ” menu, you can configu re security, MAC filtering and various ot her sett i ngs. The settings on the “ Advan ced Setting ” page shown below are for expe rienced users only. Please do not change any of the val ues on this page unless you ar e already familiar with t hese functions.
61 Data Rate Set the wireless da ta transfer rate. T he default is set to aut o. N Data Rate Set the data rate of 802.11n. Th e default is set to auto. Channel Width Select wireless channel width (bandwidt h used by wireless sign als from th e dev ice) – the recommended value is Auto 20/40MHz.
62 VI -5-1. Security The access point p rovides a variety of wireless se curity options (wireless d ata encryption). When data is encrypted, information trans mitted wirele ssly cannot be read by anyone who do es not know the en cryption key. Th e “ Security ” screen displays security s ettings for your EW -7438RPn Mini.
63 VI -5-1-1. Disable Encryption is disab led and no passwo rd/key is required to connect to the EW -7438RPn Mini. Disabling wireless encryption is not recommended. When disabled, anybody within range can connect to your device’s SSID. Enable 802.1x Authentication Check the box to e nable the 802.
64 characters from 0- 9, a- f and A-F ). Encryption Key Enter your encrypt ion key/password according to the format you selected above. A complex, hard- to -guess key is recommended. Check the “Hide” box to hide your password fro m being displayed on-scree n.
65 VI -5-1-4. WPA RADIUS WPA RADIUS is a combinat ion of WPA e ncryption an d RADIUS user authentication. If you have a RADIUS authenti cation server, you can authenticate the identity of every wi reless client against a user datab ase. WPA Unicast Cipher Suite Select from WPA (TKIP), WPA 2 (AES) or WPA2 Mixed.
66 VI -5-2. MAC Filte ring The MAC filtering feature allows you to define a list of wi reless devices permitted to connect to t his access poin t , identifi ed by their unique MAC address. When this fea ture is enabled, d evices which a re not on the li st of permitted MAC ad dresses cannot co nnect to the ac cess point.
67 MAC address filt ering table. Clear Clear all fields..
68 VI -5-3. Time Settings Set Time Zone Select the time zone of your country or region. Time Server Address The extender supp orts NTP (Network Ti me Protocol), select a ti me server from the drop down menu.
69 VI -5-4. Scheduling Setting Add Click to add a new schedule in a new window (see below). Edit Edit an existing schedule in a new window. Delete Delete the specified schedul e.
70 1. Select which functi on to schedule usi ng the “Service” m enu and enter a name for the sche dule in the “sched ule description” box . 2. Specify a start and end time (hours and minutes) usin g the drop -do wn men us for your required day.
71 VI -5-5. Administratio n Utility You can change the passwo rd used to logi n to the browser -based configuration int erface here. It is advised to do so for security purp oses . Y ou can also configure the EW -7438RPn Mini ’s IP address. Please make a note of the new password.
72 IP Address Specify an IP address he re. This IP address wil l be assigned to you r EW -7438RPn Mi ni . Subnet Mask Input the subnet mask of t he new IP address. Gateway Address Input the network ’ s gateway IP addre ss. DNS Enter the DNS add ress here.
73 VI -5-6. Config uration Tools The “Configurat ion Tools” menu al lows you to backup t he EW - 7438RPn Mi ni ’s settings, restore the setting s to a previous version or restore the EW -7438RPn Mini back to its fa ctory default state. You can a lso upgrade th e firmware, reboot the device and export t he syst em log.
74 Upgrade Firmware Yo u can upgrade the syste m firmware to a mo re recent version. You can download the latest f irmware from the Edimax website . After the upgrad e, the system will restart. Do not switch off or disconnect the device during a firmware upgrade, as this could damage the device.
75 Reboot In the event that the route r malfunctions or is not r esponding , then it is recommended that you restart t he device. Rebooting the EW-7438RPn Mini will not affect the current configuration/settings of the device. Apply Click “Apply” to reboot th e device.
76 System Log You can export the system log to a se parate file if you requi re. Export system log Click to open a new wind ow and sel ect a location to save th e log file.
77 VII. Ed iRange App The EdiRange app is for use with range extender mode only. The EdiRange app is a free smartphone app from which you can manage the extender’s functions an d check your local Wi - Fi environment. Please ensure that your smartphone/tablet is connected to your extend er’s Wi -Fi (SSID).
78 3. Enter the userna me and passwo rd (defaul t username: admin, defa ult password: 1234 ). The admin password is the same password used for the browser based configuration interface. It is recommended that you change the password from the default “1234”.
79 V II -2. Main Men u After you log in, the “St atus” page wil l be dis played. You can see the ext ender status, SSID name, and g uest network and sch edule sta tus here. Use the menu of icons across the bot tom of the screen to naviga te around the app.
80 V II - 3. Parental Control The parental contr ol function is a guest Wi -Fi network (SSID) which can be used for children, and swi tched on or off re motely using t he EdiRange app independent from your extender’s pr imary Wi - Fi netwo rk. Select “Second Wi - Fi Network” an d then enter a name and passwo rd for the network.
81 V II - 5. Admin You can change t he extender’s ad ministrative password on the Ad min page. This is the password t o login to the EdiRang e app and the browse r based configuration int erface.
82 VIII. Appendix VI II- 1. Configuring your IP a ddress For first time access to the U RL http: //edimax ext.setup please ensure your computer is set to use a dyna mic IP address. Thi s means you r computer can obtain an IP a ddress automatically from a DHCP s erver.
83 VI II-1- 1. How to check t hat your com puter uses a dynamic IP a ddress Please follow the inst ructions appro priate for your op erating system. VI II-1-1- 1. Windows XP 1. Click the “Start” butt on (it should be located in t he lower -left corne r of your computer), t hen click “Control Panel”.
84.
85 VI II-1-1- 2. Windows Vista 1. Click the “Start” butt on (it should be located in t he lower -left corne r of your computer), t hen click “C ontrol Panel” . Click “View Network Status a nd Tasks”, then click “Ma nage Network Connecti ons”.
86.
87 VI II-1-1- 3. Windows 7 1. Click the “Start” butt on (it should be located in t he lower -left co rner of your computer), t hen click “Control Panel”. 2. Under “Network and I nternet” click “View netw ork status and t asks”. 3. Click “Local Area Connection” .
88 4. Click “Properties”. 5. Select “Internet Protocol Version 4 (TCP/IPv4) and th en cli ck “Properties ”..
89 6. Select “Obtain an IP a ddress automati cally” and “Obtain DNS server address automatical ly” should be selected..
90 VII-1-1- 4. Windows 8 1. From the Windows 8 Start screen, you need to swit ch to desktop m ode. Move your curser to th e bottom left of t he screen and click. 2. In desktop mode, click the File Expl orer icon in the bott om left of t he screen, as shown below.
91 4. In the window that opens, s elect “Cha nge adapter se tting s” from the left side. 5. Choose your connection an d right cli ck, then select “Properties”.
92 6. Select “Internet Protocol Version 4 (TCP/IPv4) and th en click “Properties ”. 7. Select “Obtain an IP a ddress automati cally” and “Obtain DNS server address automatical ly” shoul d be selected.
93.
94 VI II -1-1- 5. Mac OS 1. Have your Macintosh co mputer operate as usua l, and click on “S ystem Preferences”. 2. In System Preferences, click on “Ne twork”. 3. Click on “Wi - Fi ” in th e left panel and t hen click “Advanced” in t he lower right corner.
95.
96 VI II -1- 2. How to modify the IP address of yo ur comp uter Please follow the inst ructions appro priate for yo ur operating system. In the following examples we us e the IP ad dress 1 92.168.9.20 thoug h you can use any IP address in the range 192.
97 address, subnet mask, default gateway and DNS server addresses. IP address : 192.16 8.9.20 Subnet Mask : 255. 255.255.0 Click ‘OK’ when finished.
98 VI II -1-2- 2. Windows Vista 1. Click the “Start” butt on (it should be located in t he lower -left corne r of your computer), t hen click “Control Panel”. Cli ck “View Network Status a nd Tasks”, then click “Ma nage Network Connect ions” .
99 V II -1-2-3. Windows 7 1. Click the “Start” butt on (it should be located in t he lower -left corne r of your computer), t hen click “Control Panel”.
100 2. Under “Network and I nternet” click “View netw ork st atus and t asks”. 3. Click “Local Area Connection” ..
101 4. Click “Properties”. 5. Select “Inter net Protocol Ve rsion 4 (TCP/IPv4 ) and the n click “Properties”..
102 6. Select “Use the following IP address”, then input th e following values: Your existi ng static IP address w ill be displayed in the “IP address” field before you replace it. Please make a note of this IP address, subnet mask, default gateway and DNS server addresses.
103.
104 VIII-1-2-4. Windows 8 1. From the Windows 8 Start screen, you need to swit ch to desktop m ode. Move your curser to the bott om left of the screen and click. 2. In desktop mode, click the File Expl orer icon in the bott om left of t he screen, as shown below.
105 3. Right click “Network” and then sele ct “Properties”. 4. In the window that opens, s elect “Cha nge adapter setti ngs” from the left side.
106 5. Choose your connection an d right cli ck, then select “Properties”. 6. Select “Inter net Protocol Version 4 (TCP/IPv4 ) and the n click “Properties”.
107 7. Select “Use the following IP address”, then input th e following values: Your existing static IP address w ill be displayed in the “IP address” field before you replace it. Please make a note of this IP address, subnet mask, default gateway and DNS server addresses.
108 VI II -1-2- 5. Mac 1. Have your Macintosh co mputer operate as usua l, and click on “S ystem Preferences” 2. In System Preferences, click on “Ne twork”. 3. Click on “Wi - Fi” in th e left panel and t hen click “Advanced” in t he lower right corner.
109 Your existing static IP address w ill be displayed in the “IP address” field before you replace it. Please make a note of this IP address, subnet mask, default gateway and DNS server addresses. 5. In the “IPv4 Address” a nd “Subnet Ma sk” field enter IP a ddress 192.
110 6. Click “Apply” to save the changes..
111 VI II-1- 3. How to Find Your Network Secu rity Key To find your netw ork security key, plea se follow the ins tructions approp riate for your operating system. If you are using Windows XP or earlier, please contact your ISP or router manufacturer to find your network security key.
112 4. You should see the profile of y our Wi -Fi network in the list . Right click on your Wi- Fi netwo rk and then click on “P roperties”. 5. Click on the “Secur ity” tab, and then chec k the box labeled “Show characters”. This wil l show your net work security key.
113 VI II -1-3- 2. Mac 1. Open a new Finder window, and s elect “Applicat ions” from the menu on the left side. Open the fol der labeled “Util ities” and then open the applicati on “Keychain Access”. 2. Select “ Passwords” from the sub - menu labeled “Category” on the left side, as shown below.
114 3. Double click the SSID of your netwo rk and you wil l see the following window. 4. Check the box labeled “Show password” and you will be asked to ente r your administrati ve password, which you use to log int o your Mac. En te r your password an d click “Allow”.
115 Your network secu rity password will now be displayed in the field n ext to the box labeled “S how password”. In the example belo w, the network security password is “edimax1234”.
116 VI II -1-4. How to Find Your Ro uter’s IP Address To find your router ’ s IP address, plea se follow the instructi ons appropriate for your operating system. VI II -1-4- 1. Windows XP, Vista & 7 1. Go to “Start”, select “Run” and typ e “cmd”, then pr ess Enter or click “O K”.
117 3. Your router’s IP address wil l be displayed next to “ Default Gat eway”..
118 VI II -1-4- 2. Windows 8 1. From the Windows 8 Start screen, move your cu rser t o the top rig ht corner of the screen to di splay the Cha rms bar. 2. Click “Search” and enter “cmd” i nto th e search bar. Click the “Com mand Prompt” app which be di splayed on the left side.
119 3. A new window wi ll open, type “ipconf ig” and press Enter..
120 4. Your router’s IP address wil l be displayed next to “ Defaul t Gateway”..
121 VI II -1-4- 3. Mac 1. Launch “ System Preferences ” an d click on “ Netwo rk ” . 2. If you are using an Ethernet cable t o connect to your network, your router ’ s IP address will be displayed next to “ Router ” .
122 4. Click the “ TCP/IP ” tab and your rout er ’ s IP address will be displayed next to “ Router ” ..
123 VI II - 2. Connec ting to a Wi -Fi network For help connecting to your d evice’s edimaxext. setup SSID for init ial setup, or to connect to your device’s new Wi -Fi networ k (SSID) after setup.
124 3. After correctly entering your passw ord, you will be su ccessfully connected to the EW -7438RP n Mini ’s wireless network..
125 VI II-3. Troubles hooting If you are experiencing problems wit h your wireless ext ender, please refe r to this troubleshooting guide before contact ing your dealer of purchase for help. Scenario Solution I can’t log onto the browser-based configuration interface.
126 is extremely hot. during frequent use. I f you can safely pl ace your hand on the wirele ss extender, the te mperature of the device is at a normal level. b. If you smell burning or se e smoke coming from wireless extender then di sconnect the extende r immediately, as far as it is safely possibl e to do so.
127 Then you need to modify your computer’s IP address to 192.168.2 .x where x is any value between 3 and 254 . Refer to V III -1-2. How to modify the IP address of your computer if you need guidance to do so. From there, you need to go to 192.168.2.
128 VI II -4. Glossary Default Gateway ( Wireless bridge ): Every non- access point IP device needs to configure a defaul t gateway’s IP address. When the device sends out an IP packet, if the destina tion is not on the same netwo rk, the device has t o send th e packet to its default gateway, which will then send it out towards the destination.
129 A network mask is also a 32 -bit binar y pattern, and con sists of consecutive leading 1’s followe d by consecutive t railing 0’s, such as 11111111.11111111.11111111. 00000000. Therefore sometimes a network mask can also be described simpl y as “x” number of lea di ng 1’s.
130 Application Protocol Port Number Telnet TCP 23 FTP TCP 21 SMTP TCP 25 POP3 TCP 110 H.323 TCP 1720 SNMP UCP 161 SNMP Trap UDP 162 HTTP TCP 80 PPTP TCP 1723 PC Anywhere TCP 5631 PC Anywhere UDP 5632.
131 COPYRIGHT Copyright Ed imax Technology Co., Ltd . all rights reser ved. No part of this publication may be reproduced, transmitte d, transcrib ed, stored in a retrieval system, or translated i.
132 Federal Communic ation Commis sion Interference S tatement This equipment has b een tested and f ound to comply with the limits f or a Class B digital d evice, pursuant to Part 15 of FCC Rules. These limits are de signed to provide reasonable protection again st harmful interference in a residential install ation.
133 EU Declaration of Conformity English: This equipment is in compliance with the essentia l requirements and other relevant provisions of Directive 2006/95/EC, 2011/65/EC. Franç ais : Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2006/95/CE, 2011/65/CE.
134 Declaration of Conformity We, Edimax Tec hnology Co., L td ., declare under our sole responsibility, that the equipmen t described below complies with the requirem ents of the European R&TTE directives. Equipment: N300 Mini Wi-Fi Ext ender/Access Poi nt/Wi-Fi Bridge Model No.
135 Notice Accord ing to GNU General Public License Ver sion 2 This product inclu des softwar e that is subject to the GNU General Public L icense version 2.
136 intact all the notices that refer to this License and to the absence of any warra nty; and give any other recipients of th e Program a copy of th is License along with the Program. You may charge a fe e for the ph ysical act of transferring a c opy, a nd you may at your option offer warranty protection i n exchange for a fee.
137 6. Each time you redistribu te the Program (or a ny work bas ed on the Program), t he recipient auto matically receives a license from the original licensor to c opy, d istribute or modify the Program s u bject to the se terms and condition s.
デバイスEdimax EW-7438RPn Miniの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Edimax EW-7438RPn Miniをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはEdimax EW-7438RPn Miniの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Edimax EW-7438RPn Miniの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Edimax EW-7438RPn Miniで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Edimax EW-7438RPn Miniを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はEdimax EW-7438RPn Miniの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Edimax EW-7438RPn Miniに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちEdimax EW-7438RPn Miniデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。